Occupational accidents in Slovak Military Forests and Estates: incidence, timing, and trends over 10 years.

Introduction: Forestry provides a wide range of employment opportunities worldwide and is seen as one of the high-risk industries in terms of occupational accidents. Objectives: The submitted study analyzed the injury rate in the Military Forests and Estates of the Slovak Republic (62.6 thousand ha) between 2013 and 2022. Methods: The data analyses included regression and correlation analyses, χ2 tests to analyze the relationships between studied variables, and incidence rates. Results: During the observed period, employees suffered 26 occupational accidents, of which 19.2% were light, 57.7% were registered, 23.1% were severe, and 0% were fatal. For every 1 million m3 of harvested timber, 7.7 accidents occurred. The incidence rate during the observed period was 672.1/100,000 employees. The highest proportion of accidents was in the age group 51-60 years and in employees with the lowest length of work experience <5 years. Regarding time, the highest proportion of occupational accidents occurred between 8:01 and 10:00 AM (53.8%) and day-wise on Thursdays (46.2%). The highest proportion of accidents occurred among forest workers (65.3%) during pruning and silviculture activities (42.3%). The most common injury site was forest stands (65.3%). Superficial injuries (34.6%) were the most common, mainly affecting the lower limbs (50%). The most frequent material agents causing the accidents were work and transport areas as sources of worker fall (38.5%), and the most frequent reason for an accident to occur was the lack of personal requirements for proper work performance (92.4%), whereas only (3.8%) of accidents occurred due to the use of forbidden or hazardous working procedures. Conclusion: The presented study identified the most vulnerable worker groups and provided an overview of the overall injury rate at the state forest company in Slovakia. The documentation can be incorporated into the safety strategies of forest enterprises.

Facile fabrication of amorphous Al/Fe based metal-organic framework as effective heterogeneous fenton catalyst for environmental remediation.

This study presents a facile preparation and durable amorphous Fe and Al-based MOF nanoplate (AlFe-BTC MOFs) catalyst with notable stability in Fenton reactions. Rigorous characterization using XRD, HR-TEM, and BET confirms the amorphous nature of the synthesized AlFe-BTC MOFs, revealing mesopores (3.4 nm diameter), a substantial surface area (232 m2/g), and a pore volume of 0.69 cc/g. XPS analysis delineates distinct Al2p and Fe2p binding energy values, signifying specific chemical bonding. FE-SEM elemental mapping elucidates the distinctive distribution of Fe and Al within the framework of AlFe-BTC MOFs. In catalytic activity testing, the amorphous AlFe-BTC MOFs exhibited outstanding performance, achieving complete degradation of Methylene blue (MB) dye and 78% TOC removal over 45 min of treatment under mild reaction conditions. The catalyst's durability was assessed, revealing about 75% TOC removal and complete dye decomposition over five successive recycles, with less than 1 mg/L of Fe and Al leaching. UV-Vis spectra revealed the destruction of MB dye over multiple recycling studies. Based on this finding, the amorphous AlFe-BTC MOF nanoplates emerge as a promising solution for efficient dye removal from industrial wastewater, underscoring their potential in advanced environmental remediation processes.

Does the "Belt and Road Initiative" benefit the environment? Insight from analysis of intra-industry trade in environment goods.

The expansion of the Belt and Road Initiative (BRI) has raised a wide range of concerns about its environmental impact. Therefore, from the perspective of environmental impacts, this study used the two-way fixed effect staggered differences in differences (TWFE Staggered DID) method to examine the impact of the BRI on the Environment Goods (EGs) intra-industry trade (IIT) between China and other Belt and Road (B&R) countries, including a sample of 191 countries, covering the period from 2010 to 2019 for eliminating the impact of COVID-19 and the financial crisis in 2008 and 2009. Because only 135 countries signed a Memorandum of Understanding between 2010 and 2019, this study treated these B&R countries as the study group, and the other 73 countries (non-B&R countries) as the control group. This study described EGs using the 54 6-digit code Environment Goods in Harmonized Commodity Description and Coding System listed in the "APEC LIST OF ENVIRONMENT GOODS" published by the Asia-Pacific Economic Cooperation in 2012, and used the intra-industry trade index proposed by Grubel and Lloyd in 1971 to measuring dependent variable. The research results indicated that the BRI has significantly promoted bilateral EGs IIT. The mechanism test implied that, in addition to direct impacts, the BRI also has indirect impacts by boosting the energy restructuring of B&R countries. These results prove that the BRI has positive impacts on the environment. The heterogeneity test showed that there is a heterogeneous impact depending on the type of IIT, product categorization, B&R countries' income levels, and geographic environment. This study not only gives theoretical and empirical evidence of the positive environmental impacts of the BRI, but also provides practical guidance for the development of EGS IIT between China and B&R countries, thereby contributing to global carbon emissions reduction and environmental governance to some degree.

Microorganism-mediated biodegradation for effective management and/or removal of micro-plastics from the environment: a comprehensive review.

Micro- plastics (MPs) pose significant global threats, requiring an environment-friendly mode of decomposition. Microbial-mediated biodegradation and biodeterioration of micro-plastics (MPs) have been widely known for their cost-effectiveness, and environment-friendly techniques for removing MPs. MPs resistance to various biocidal microbes has also been reported by various studies. The biocidal resistance degree of biodegradability and/or microbiological susceptibility of MPs can be determined by defacement, structural deformation, erosion, degree of plasticizer degradation, metabolization, and/or solubilization of MPs. The degradation of microplastics involves microbial organisms like bacteria, mold, yeast, algae, and associated enzymes. Analytical and microbiological techniques monitor microplastic biodegradation, but no microbial organism can eliminate microplastics. MPs can pose environmental risks to aquatic and human life. Micro-plastic biodegradation involves fragmentation, assimilation, and mineralization, influenced by abiotic and biotic factors. Environmental factors and pre-treatment agents can naturally degrade large polymers or induce bio-fragmentation, which may impact their efficiency. A clear understanding of MPs pollution and the microbial degradation process is crucial for mitigating its effects. The study aimed to identify deteriogenic microorganism species that contribute to the biodegradation of micro-plastics (MPs). This knowledge is crucial for designing novel biodeterioration and biodegradation formulations, both lab-scale and industrial, that exhibit MPs-cidal actions, potentially predicting MPs-free aquatic and atmospheric environments. The study emphasizes the urgent need for global cooperation, research advancements, and public involvement to reduce micro-plastic contamination through policy proposals and improved waste management practices.

AI technology specialization and national competitiveness.

This study investigates the factors influencing specialization in artificial intelligence (AI) technology, a critical element of national competitiveness. We utilized a revealed comparative advantage matrix to evaluate technological specialization across countries and employed a three-way fixed-effect panel logit model to examine the relationship between AI specialization and its determinants. The results indicate that the development of AI technology is strongly contingent on a nation's pre-existing technological capabilities, which significantly affect AI specialization in emerging domains. Additionally, this study reveals that scientific knowledge has a positive impact on technological specialization, highlighting the necessity of integrating scientific advancements with technological sectors. Although complex technologies positively influence AI specialization, their effect is less pronounced than that of scientific knowledge. This suggests that in rapidly advancing fields, such as AI, incorporating new scientific knowledge into related industries may be more advantageous than simply advancing existing technologies to outpace competitors. This insight points nations toward enhancing AI competitiveness in new areas, emphasizing the vital importance of both scientific and technological capabilities, and the integration of novel AI knowledge with established sectors. This research offers critical guidance for policymakers in less technologically and economically developed countries, as these nations may not have the technological infrastructure required to foster AI specialization through increased technical complexity.

Changes in the labor share of enterprises under the green and low-carbon transition: Empirical evidence from China's carbon emission trading pilot.

Green and low carbon reflect the high-quality development, while income distribution is an indicator of the balance of development. Is there a lack of fairness in the process of green and low carbon transition of enterprises? Using data from A-share listed companies from 2009 to 2016, this paper constructs a DID identification framework for controlling the endogeneity problem using the 2013 carbon trading policy pilot as a quasi-natural experiment to empirically test the impact of corporate low-carbon transformation on corporate labor income share in the context of carbon trading policy. The findings indicate that carbon trading policy decreases the labor income share of firms. In addition, we demonstrate that the low-carbon transition promotes labor productivity, suggesting that the Porter's hypothesis is confirmed in China, but the increase in labor wages is not in tandem with productivity growth, resulting in reduced labor income share. Heterogeneity analysis shows that the impact of carbon trading policy on labor income share is mainly pronounced in larger firms, high technology firms and persistent incumbent firms. Collectively, these results are expected to accurately improve our understanding on the impact of low-carbon transformation of enterprises on income distribution and provide reference for the government to formulate industrial policies and distribution mechanisms under low-carbon economy.

Prioritization of control measures in leakage scenario using Hendershot theory and FBWM-TOPSIS.

Currently, there is increasing concern about the safety and leakage of process industries. Therefore, the present study aims to prioritize control measures before and after the leakage scenario by using the Hendershot theory and MCDM techniques. In this study, two proactive and reactive layers were selected before and after leakage of tanks, respectively. Then, criteria and alternatives were selected to perform fuzzy TOPSIS (FTOPSIS) and find the best alternative based on the literature review and Hendershot approach. The linear model of the fuzzy Best-Worst method (FBWM) was constructed and resolved using Lingo 17 software. Subsequently, criteria were assigned weights based on thorough calculations of the inconsistency rate. The weight of study experts was equal to 0.25. The results of FBWM showed that the reliability index with a weight of 0.3727 was ranked first and the inconsistency rate ([Formula: see text]) was calculated to be equal to 0.040. Inherent Safety Design (ISD) (0.899) and passive safety (0.767) also ranked first before and after tank leaks, respectively. Using the FBWM method leads to fewer pairwise comparisons and at the same time more stability. Although ISD and passive strategies are more valid and strict, elements of all strategies are necessary for a comprehensive process safety management program.

The impact of COVID-19 pandemic on the world's major economies: based on a multi-country and multi-sector CGE model.

Objective: To quantitatively assess the impact of COVID-19 pandemic on public health, as well as its economic and social consequences in major economies, which is an international public health concern. The objective is to provide a scientific basis for policy interventions. Subject and methods: This study utilizes a multi-country, multi-sector CGE-COVID-19 model to analyze the repercussions of the pandemic in 2022. The re-search focuses on quantifying the effects of COVID-19 on the macroeconomy and various industry sectors within six economies: the United States, China, the EU, the United Kingdom, Japan, and South Korea. Results: The COVID-19 pandemic shock had the most significant impact on China and the EU, followed by notable effects observed in the United States and the United Kingdom. In contrast, South Korea and Japan experienced relatively minimal effects. The reduction in output caused by the pandemic has affected major economies in multiple sectors, including real industries such as forestry and fisheries, and the services such as hotels and restaurants. Conclusion: The overall negative macroeconomic impact of the epidemic on major economies has been significant. Strategic interventions encompassing initiatives like augmenting capital supply, diminishing corporate taxes and fees, offering individual subsidies, and nurturing international cooperation held the potential to mitigate the detrimental economic consequences and enhance the global-economic amid the pan-demic. Consequently, this study contributes to the advancement of global anti-epidemic policies targeting economic recovery. Moreover, using the CGE-COVID-19 model has enriched the exploration of general equilibrium models in PHEIC events.

Quantifying the global film festival circuit: Networks, diversity, and public value creation.

Film festivals are a key component in the global film industry in terms of trendsetting, publicity, trade, and collaboration. We present an unprecedented analysis of the international film festival circuit, which has so far remained relatively understudied quantitatively, partly due to the limited availability of suitable data sets. We use large-scale data from the Cinando platform of the Cannes Film Market, widely used by industry professionals. We explicitly model festival events as a global network connected by shared films and quantify festivals as aggregates of the metadata of their showcased films. Importantly, we argue against using simple count distributions for discrete labels such as language or production country, as such categories are typically not equidistant. Rather, we propose embedding them in continuous latent vector spaces. We demonstrate how these "festival embeddings" provide insight into changes in programmed content over time, predict festival connections, and can be used to measure diversity in film festival programming across various cultural, social, and geographical variables-which all constitute an aspect of public value creation by film festivals. Our results provide a novel mapping of the film festival circuit between 2009-2021 (616 festivals, 31,989 unique films), highlighting festival types that occupy specific niches, diverse series, and those that evolve over time. We also discuss how these quantitative findings fit into media studies and research on public value creation by cultural industries. With festivals occupying a central position in the film industry, investigations into the data they generate hold opportunities for researchers to better understand industry dynamics and cultural impact, and for organizers, policymakers, and industry actors to make more informed, data-driven decisions. We hope our proposed methodological approach to festival data paves way for more comprehensive film festival studies and large-scale quantitative cultural event analytics in general.

Mining co-location patterns of manufacturing firms using Q statistic and additive color mixing.

The agglomeration effect significantly influences firms' site selection. Manufacturing firms often exhibit intricate spatial co-location patterns that are indicative of agglomerations due to their reliance on material input and product output across various subdivisions of manufacture. In this study, we present an analytical approach employing the Q statistic and additive color mixing visualization to assess co-location patterns of manufacturing firms. We identified frequent pairs and triplets of manufacturing divisions, mapping them to reveal distinct categories: labor-intensive clusters, upstream/downstream industrial chains, and technology-spillover clusters. These agglomeration categories concentrate in different regions of the city. Policy implications are proposed to promote the upgrade of labor-intensive divisions, enhance the operational efficiency of upstream/downstream industrial chains, and reinforce the spillover effects of technology-intensive divisions.

The impact of the digital economy on creative industries development: Empirical evidence based on the China.

Digital economy has become a "new engine" that driving global economic growth. Nevertheless, numerous controversies persist regarding whether and how digital economy can facilitate the development of emerging industries. Thus, this paper investigates how digital economy affects creative industries development in China and whether innovation efficiency mediates this relationship. Drawing upon a panel data set containing 29 Chinese provinces from 2012 to 2019, an econometric model is constructed for empirical analysis. We find that digital economy significantly promotes creative industries development, and innovation efficiency plays a partial mediating role between digital economy and creative industries development. According to the influence mechanism, the digital economy of various regions could promote the creative industries development by improving the innovation efficiency. Finally, relevant suggestions were put forward from the expanding application paths, improving regional innovation efficiency, and creating an innovative environment.

Can policy advantages be transformed into industrial advantages? Evidences from digital economy industry development in Zhejiang Province, China.

The digital economy is a new impetus to promote high-quality economic development. We use the policies of Zhejiang Information Economy Development Demonstration Base (IEDD) and Zhejiang Software and Information Service Industry Base (SISI) established between 2015 and 2017 to design a quasi-natural experiment. By using a panel data from 2005 to 2020 in Zhejiang and the difference-in-differences model, we test the impacts of IEDD and SISI policies on digital economy development. We find that there are significant spatial differences for digital economy in Zhejiang. IEDD and SISI policies improve the digital economy development, that is, the policy advantages can indeed be transformed into industrial advantages. The IEDD policy can promote the digital economy industry development by enhancing the digital infrastructure and financial development; SISI policy can promote the development of the digital economy industry by promoting financial development. The results of quantile regression show that the promotion effect of IEDD and SISI policies increases with the improvement of the industrial basis of regional digital economy. The results of group regression show that the IEDD policy promotes the digital economy development in counties and county-level cities of Zhejiang, and the SISI policy plays a significant role in municipal districts.

Unseen overlap between fishing vessels and top predators in the northeast Pacific.

Accurate assessments of human-wildlife risk associated with industrial fishing are critical for the conservation of marine top predators. Automatic Identification System (AIS) data provide a means of mapping fishing and estimating human-wildlife risk; however, risk can be obscured by gaps in the AIS record due to technical issues and intentional disabling. We assessed the extent to which unseen fishing vessel activity due to AIS gaps obscured estimates of overlap between fishing vessel activity and 14 marine predators including sharks, tunas, mammals, seabirds, and critically endangered leatherback turtles. Among vessels equipped with AIS in the northeast Pacific, up to 24% of total predator overlap with fishing vessel activity was unseen, and up to 36% was unseen for some individual species. Waters near 10°N had high unseen overlap with sharks yet low reported shark catch, revealing potential discrepancies in self-reported datasets. Accounting for unseen fishing vessel activity illuminates hidden human-wildlife risk, demonstrating challenges and solutions for transparent and sustainable marine fisheries.

Computer-Vision-Based Sensing Technologies for Livestock Body Dimension Measurement: A Survey.

Livestock's live body dimensions are a pivotal indicator of economic output. Manual measurement is labor-intensive and time-consuming, often eliciting stress responses in the livestock. With the advancement of computer technology, the techniques for livestock live body dimension measurement have progressed rapidly, yielding significant research achievements. This paper presents a comprehensive review of the recent advancements in livestock live body dimension measurement, emphasizing the crucial role of computer-vision-based sensors. The discussion covers three main aspects: sensing data acquisition, sensing data processing, and sensing data analysis. The common techniques and measurement procedures in, and the current research status of, live body dimension measurement are introduced, along with a comparative analysis of their respective merits and drawbacks. Livestock data acquisition is the initial phase of live body dimension measurement, where sensors are employed as data collection equipment to obtain information conducive to precise measurements. Subsequently, the acquired data undergo processing, leveraging techniques such as 3D vision technology, computer graphics, image processing, and deep learning to calculate the measurements accurately. Lastly, this paper addresses the existing challenges within the domain of livestock live body dimension measurement in the livestock industry, highlighting the potential contributions of computer-vision-based sensors. Moreover, it predicts the potential development trends in the realm of high-throughput live body dimension measurement techniques for livestock.

Unlocking the mergers and acquisitions puzzle in the United Arab Emirates: Investigating the impact of corporate leverage on target selection and payment methods.

Following a long stream of literature on the drivers of Mergers and Acquisition (M&A) activities, this study examines the effect of corporate leverage on several decisions of M&A deals in the context of the United Arab Emirates (UAE). Using M&A data from the Thomson One database for the period between 2005 and 2022, we find that corporate leverage significantly influences the type of M&A target. This study further adds to the prior literature on the contradictory behaviours of high and low leverage firms by examining whether acquisition decisions differ amongst them in M&A deals in the UAE context. Results indicate that high (low) leverage firms are less (more) likely to acquire private targets and more (less) inclined to acquire a target from a different (same) industry. Furthermore, our results show that the relationship between the method of payment used in M&A deals and corporate leverage is insignificant. We control for endogeneity using Heckman's two-stage method. In brief, this paper extends the literature with conclusive evidence that considerations of capital structure can significantly anticipate and explain firms' behaviour toward M&A choices. The implication of findings may include a call to reform some aspects of the Competition Law in the UAE by requiring private firms to enhance their disclosure practices similar to their public counterparts.

Evaluation of innovation primacy in cross-regional central cities: Evidence from the Huaihai Economic Zone in China (2010-2020).

With the intensification of global economic competition, innovation has become one of the core elements of vigorous development in various regions. Improving the innovation ability of cross-regional central cities is the main factor influencing whether a region can achieve economic and social development. In this paper, an innovation primacy index system is designed according to the links of the innovation value chain, and the innovation advantages and empirical effects are comprehensively analyzed by using the point-to-point method, entropy weight method, gravity model and two-way fixed effect model. Based on the data of 8 cities in the core area of the Huaihai Economic Zone from 2010 to 2020 in China, Xuzhou's innovation primacy ranks first in the core area of the Huaihai Economic Zone, which accords with its status as the central city of the region. Its index has been rising, and its development trend is also good. However, the overall innovation ability of the core area of the Huaihai Economic Zone is unbalanced; the overall economic foundation is not solid enough. In terms of knowledge innovation, R&D innovation and industrial innovation, the industrialization level, around the activation of Xuzhou city vitality, enhances the Xuzhou innovation radiation drive, leading to a decrease in the Huaihai Economic Zone. Finally, some corresponding suggestions on innovation primacy have been proposed for the city of the Huaihai Economic Zone.

A study on the measurement of inter-provincial trade costs in Yangtze River Delta from the perspective of value-added trade and its promotion effect.

This article uses the Novy model improved by value-added trade data to measure the cost of inter-provincial trade in the Yangtze River Delta and, on this basis, uses the differential decomposition method to explore the promoting effect of inter-provincial trade costs on the development of inter-provincial trade in the Yangtze River Delta. The results show that the inter-provincial trade costs of the provinces/municipalities in the Yangtze River Delta have increased and decreased, but the changes are small, and there are significant differences in sectoral and bilateral trade costs; the results of the differential decomposition show that the contribution of inter-provincial trade costs to inter-provincial trade development in the Yangtze River Delta is much lower than that of economic growth. Therefore, the Yangtze River Delta should deepen the division of labor and cooperation, give full play to the radiation and leading role of Shanghai as an economic center, and accelerate the digital innovation transformation of the service industry to reduce inter-provincial trade costs and achieve a higher level of integrated development of the Yangtze River Delta.