C-N linked donor type porphyrin derivatives: unrevealed hole-transporting materials for efficient hybrid perovskite solar cells.

A new series of Zn(II) and Cu(II)-based porphyrin complexes 5a and 5b doubly functionalised with carbazole units were developed to be used as hole-transporting materials (HTMs) in perovskite solar cells (PSCs). These complexes were obtained via a nucleophilic substitution reaction mediated by PhI(OAc)2/NaAuCl4·2H2O, or using C-N transition metal-assisted coupling. The hole extraction capability of 5a and 5b was assessed using cyclic voltammetry; this study confirmed the better alignment of the Zn(II) complex 5a with the perovskite valence band level, compared to the Cu(II) complex 5b. The optimised geometry and molecular orbitals of both complexes also corroborate the higher potential of 5a as a HTM. Photoluminescence characterisation showed that the presence of 5a and 5b as HTMs on the perovskite surface resulted in the quenching of the emission, matching the hole transfer phenomenon. The photovoltaic performance was evaluated and compared with those of reference cells made with the standard HTM spiro-OMeTAD. The optimised 5-based devices showed improvements in all photovoltaic characteristics; their open circuit voltage (Voc) reached close to 1 V and short-circuit current density (Jsc) values were 13.79 and 9.14 mA cm-2 for 5a and 5b, respectively, disclosing the effect of the metallic centre. A maximum power conversion efficiency (PCE) of 10.01% was attained for 5a, which is 65% of the PCE generated by using the spiro-OMeTAD reference. This study demonstrates that C-N linked donor-type porphyrin derivatives are promising novel HTMs for developing efficient and reproducible PSCs.

Reduced Chitosan as a Strategy for Removing Copper Ions from Water.

Toxic heavy metals are priority pollutants in wastewater, commonly present in dangerous concentrations in many places across the globe. Although in trace quantities copper is a heavy metal essential to human life, in excess it causes various diseases, whereby its removal from wastewater is a necessity. Among several reported materials, chitosan is a highly abundant, non-toxic, low-cost, biodegradable polymer, comprising free hydroxyl and amino groups, that has been directly applied as an adsorbent or chemically modified to increase its performance. Taking this into account, reduced chitosan derivatives (RCDs 1-4) were synthesised by chitosan modification with salicylaldehyde, followed by imine reduction, characterised by RMN, FTIR-ATR, TGA and SEM, and used to adsorb Cu(II) from water. A reduced chitosan (RCD3), with a moderate modification percentage (43%) and a high imine reduction percentage (98%), proved to be more efficient than the remainder RCDs and even chitosan, especially at low concentrations under the best adsorption conditions (pH 4, RS/L = 2.5 mg mL-1). RCD3 adsorption data were better described by the Langmuir-Freundlich isotherm and the pseudo-second-order kinetic models. The interaction mechanism was assessed by molecular dynamics simulations, showing that RCDs favour Cu(II) capture from water compared to chitosan, due to a greater Cu(II) interaction with the oxygen of the glucosamine ring and the neighbouring hydroxyl groups.

Reaction of Corroles with Sarcosine and Paraformaldehyde: A New Facet of Corrole Chemistry.

Details on the unexpected formation of two new (dimethylamino)methyl corrole isomers from the reaction of 5,10,15-tris(pentafluorophenyl)corrolatogallium(III) with sarcosine and paraformaldehyde are presented. Semi-empirical calculations on possible mechanism pathways seem to indicate that the new compounds are probably formed through a Mannich-type reaction. The extension of the protocol to the free-base 5,10,15-tris(pentafluorophenyl)corrole afforded an unexpected new seven-membered ring corrole derivative, confirming the peculiar behavior of corroles towards known reactions when compared to the well-behaved porphyrin counterparts.

Higher activation barriers can lift exothermic rate restrictions in electron transfer and enable faster reactions.

Electron transfer reactions are arguably the simplest chemical reactions but they have not yet ceased to intrigue chemists. Charge-separation and charge-recombination reactions are at the core of life-sustaining processes, molecular electronics and solar cells. Intramolecular electron donor-acceptor systems capture the essential features of these reactions and enable their fundamental understanding. Here, we report intramolecular electron transfers covering a range of 100 kcal mol-1 in exothermicities that show an increase, then a decrease, and finally an increase in rates with the driving force of the reactions. Concomitantly, apparent activation energies change from positive, to negative and finally to positive. Reactions with positive activation energies are found to be faster than analogous reactions with negative effective activation energies. The increase of the reorganization energy with the driving force of the reactions can explain the peculiar free-energy relationship observed in this work.

Oxocomplexes of Mo(VI) and W(VI) with 8-hydroxyquinoline-5-sulfonate in solution: structural studies and the effect of the metal ion on the photophysical behaviour.

Multinuclear ((1)H, (13)C, (95)Mo and (183)W) NMR spectroscopy, combined with DFT calculations, provides detailed information on the complexation between the Mo(VI) and W(VI) oxoions and 8-hydroxyquinoline-5-sulfonate (8-HQS) in aqueous solution. Over the concentration region studied, Mo(VI) and W(VI) oxoions form three homologous complexes with 8-HQS in water in the pH range 2-8. Two of these, detected at pH < 6, are mononuclear 1 : 2 (metal : ligand) isomers, with the metal centre (MO2(2+)) coordinated to two 8-HQS ligands. An additional complex, dominant at slightly higher pH values (5-8) for solutions with a 1 : 1 metal : ligand molar ratio, has a binuclear M2O5(2+) centre coordinated to two 8-HQS ligands. The two metal atoms are bridged by three oxygen atoms, two coming from 8-HQS, together with the M-O-M bridge of the bimetallic centre. We show that the long-range exchange corrected BOP functional with local response dispersion (LCBOPLRD), together with explicit solvent molecules, leads to geometries that readily converge to equilibrium structures having realistic bridging O8-HQS-M bonds. Previous attempts to calculate the structures of such binuclear complexes using DFT with the B3LYP functional have failed due to difficulties in treating the weak interaction in these bridged structures. We believe that the LCBOPLRD method may be of more general application in theoretical studies in related binuclear metal complexes. UV/visible absorption and luminescence spectra of all the complexes have also been recorded. The complex between Mo(vi) and 8-HQS is only weakly luminescent, in contrast to what has been observed with this ligand and many other metal ions. We suggest that this is due to the presence of low-lying ligand-to-metal charge transfer (LMCT) states close to the emitting ligand-based level which quench the emission. However, with W(VI), DFT calculations show that the LMCT states are now much higher in energy than the ligand based levels, leading to a marked increase in fluorescence.

NMR, DFT and luminescence studies of the complexation of Al(III) with 8-hydroxyquinoline-5-sulfonate.

Multinuclear ((1)H, (13)C and (27)Al) magnetic resonance spectroscopy (1D and 2D), DFT calculations and fluorescence have been used to study the complexation of 8-hydroxyquinoline-5-sulfonate (8-HQS) with Al(III). The study combines the high sensitivity of luminescence techniques, the selectivity of multinuclear NMR spectroscopy with the structural details accessible through DFT calculations, and aims to provide a detailed understanding of the complexation between the Al(3+) ion and 8-HQS. A full speciation study has been performed and over the concentration region studied, the Al(3+) ion forms complexes with 8-HQS in an aqueous solution in the pH range 2-6. At higher pH, the extensive hydrolysis of the metal limits complexation. Using Job's method, three complexes were detected, with 1 : 1, 1 : 2 and 1 : 3 (metal : ligand) stoichiometries. These results are in agreement with those previously reported using potentiometric and electrochemical techniques. The geometries of the complexes are proposed based on the combination of NMR results with optimized DFT calculations. All the complexes in aqueous solutions at 25 °C are mononuclear species, and have an approximately octahedral geometry with the metal coordinated to one molecule of 8-HQS and four molecules of water (1 : 1 complex), two molecules of 8-HQS and two molecules of water mutually cis (1 : 2 complex), and to three molecules of 8-HQS in non-symmetrical arrangement (mer-isomer), for the 1 : 3 (metal : ligand) complex. On binding to Al(III), 8-HQS shows a more marked fluorescence than the weakly fluorescent free ligand. In addition, as previously noted, there are marked changes in the absorption spectra, which support the use of 8-HQS as a sensitive optical sensor to detect Al(3+) metal ions in surface waters and biological fluids. These complexes also show potential for applications in organic light emitting diodes (OLEDs).

Differentiation of aminomethyl corrole isomers by mass spectrometry.

Two new isomeric aminomethyl corrole derivatives of [5,10,15-tris(pentafluorophenyl)corrolato]gallium(III) were synthesized with pyridine (py) molecules as axial ligands. When investigated by electrospray ionization mass spectrometry, in the positive and the negative ion modes, these compounds showed an unusual gas-phase behavior that could be used for their differentiation. In the positive ion mode, the differentiation was achieved through the formation of diagnostic fragment ions formed from [M-py + H](+) precursors, by (CH(3) )(2) NH and HF losses. An unusual addition of water to the main fragment ions provides an alternative route for isomer identification. Semi-empirical calculations were performed to elucidate the structures and stabilities of the main ionic species formed in the positive ion mode. In the negative ion mode isomer discrimination is accomplished via the fragmentation of the methoxide adduct ions [M-py + CH(3) O](-) through (CH(3) )(2) N(.) and HF losses.

NMR, DFT and luminescence studies of the complexation of Zn(II) with 8-hydroxyquinoline-5-sulfonate.

Multinuclear ((1)H, (13)C) magnetic resonance spectroscopy, DFT calculations and luminescence techniques have been used to study 8-hydroxyquinoline-5-sulfonate (8-HQS) and its complexes with Zn(ii), in aqueous solution. The study combines the high sensitivity of luminescence techniques, the selectivity of multinuclear NMR spectroscopy with the structural details accessible through DFT calculations, and aims to obtain a detailed understanding of the complexation between the Zn(2+) ion and 8-HQS. In addition to a complete assignment of the (1)H and (13)C NMR signals of 8-HQS, a full speciation study has been performed. Over the concentration region studied, Zn(2+) metal ion forms only one significant complex species with 8-HQS in aqueous solution in the pH range 6-8. Job's method shows that this species has a 1:2 (metal:ligand) stoichiometry. The geometry around the metal centre, according to structural optimization using DFT calculations, is suggested to be square bipyramidal, with two coordinated water molecules mutually trans, and the remaining positions occupied by the donor groups of the two coordinated 8-HQS ligands. On binding to Zn(ii), 8-HQS shows a marked fluorescence compared with the weakly-luminescent free ligand. In addition, as previously noted, there are marked changes in the absorption spectra, which support the use of 8-HQS as a sensitive fluorescent sensor to detect Zn(2+) metal ion in surface waters, biological fluids, etc. Based on results of the structural studies, suggestions are made of ways for enhancing fluorescence sensitivity.

Computational study of molecules with high intrinsic hyperpolarizabilities.

In the current manuscript we present the results of a computational study on a series of chromophores with enhanced intrinsic hyperpolarizability. The high hyperpolarizability values of these molecules were previously reported and were achieved by making use of aromatic moieties in order to modulate the aromatic stabilization energy along the conjugated bridge between the donor and the acceptor. Calculations were performed using semiempirical, DFT, and TDDFT methods, and the results reproduce the trend determined experimentally for the first hyperpolarizability values. Several calculation schemes were used, and the best agreement was achieved when long-range Hartree-Fock exchange corrections and solvent effects are included in the DFT calculations. The long-range corrections proved to be especially important for the azobenzene derivatives, which otherwise have their hyperpolarizability overestimated considerably in the DFT calculations. The results are also analyzed within the framework of a two-level model, which correctly reproduces the trend in the hyperpolarizabilities of the molecules under study.

Ultrasound-mediated synthesis of camphoric acid-based chiral salens for the enantioselective trimethylsilylcyanation of aldehydes.

New chiral salen ligands were prepared by the ultrasound-irradiated condensation of optically active (1R, 3S)-1,2,2-trimethyl-1,3-diaminocyclopentane with aromatic 1-hydroxyaldehydes. The ultrasound-mediated process is more convenient due to shorter reaction times, energy economy, and easier isolation of the products. The in situ formed Ti(IV)(salen) complexes, evaluated as catalysts in the enantioselective trimethylsilylcyanation of benzaldehyde, were found to be efficient for this process, originating the corresponding product in high yields (72-99%) and selectivities of up to 79%. The lowest energy transition states were determined by computational studies. These results were in qualitative agreement with the experimentally observed ones.

Conformational studies of poly(9,9-dialkylfluorene)s in solution using NMR spectroscopy and density functional theory calculations.

Relationships have been obtained between intermonomer torsional angle and NMR chemical shifts ((1)H and (13)C) for isolated chains of two of the most important poly(9,9-dialkylfluorenes), poly[9,9-bis(2-ethylhexyl)fluorene-2,7-diyl] (PF2/6) and the copolymer poly(9,9-dioctylfluorene-co-[2,1,3]benzothiadiazole-4,7-diyl) (F8BT), using DFT calculations. The correlations provide a model for NMR spectral data interpretation and the basis for analysis of conformational changes in poly(9,9-dialkylfluorene-2,7-diyl)s. The correlations obtained for PF2/6 indicate that the (13)C chemical shifts of the aromatic carbons close to the intermonomer connection (C1, C2, and C3) have minimum values at planar conformations (0 degrees and 180 degrees ) and maximum values at 90 degrees conformations. In contrast, the (1)H chemical shifts of the corresponding aromatic ortho protons (Ha and Hb) are greatest for planar conformations, and the minimum values are seen for 90 degrees conformations. For the F8BT copolymer, similar relationships are observed for the (1)H (Ha, Hb, and Hc) aromatic shifts. Considering the aromatic carbons of F8BT, the behavior of C2, C4, C5, and C6 is similar to that found for the PF2/6 carbons. However, C1 and C3 of the fluorene moiety behave differently with varying torsion angle. These are in close proximity to the fluorene-benzothiadiazole linkage and are markedly affected by interactions with the thiadiazole unit such that delta(C1) is a maximum for 180 degrees and a minimum for 0 degrees , whereas delta(C3) is a maximum for 0 degrees and minimum for 180 degrees. We have studied the (1)H and (13)C spectra of the two polymers at temperatures between -50 degrees C and +65 degrees C. The observed changes to higher or lower frequency in the aromatic resonances were analyzed using these theoretical relationships. Fluorescence studies on PF2/6 in chloroform solution suggest there are no significant interchain interactions under these conditions. This is supported by variable-temperature NMR results. Polymer-solvent and polymer intramolecular interactions were found to be present and influence all of the alkylic and one of the aromatic (1)H resonances (Hb). The detailed attribution of the (1)H and (13)C NMR spectra of the two polymers was made prior to the establishment of the relationships between torsion angle and NMR chemical shifts. This was carried out through DFT calculation of the (1)H and (13)C shielding constants of the monomers, coupled with distortionless enhancement by polarization transfer and heteronuclear correlation NMR spectra. Several DFT levels of calculation were tested for both optimization of structures and shielding constants calculation. The B3LYP/6-31G(d,p) method was found to perform well in both cases.