The metamorphosis of analytical chemistry.

Defining analytical chemistry as the measurement of isolated compositional features in a selected study object ignores the unique perspective that analytical chemists bring to twenty-first century science and society. In this feature article, we will discuss some of the existing preconceptions and misinterpretations of analytical chemistry that occur at present and will tackle them from the more up-to-date perspective of science in the Big Data Era. This will place their influence in context while simultaneously enlarging the scope of the discipline analytical chemistry to its well-deserved prevalent position in present-day science and technology. Graphical abstract.

History and present status of imaging analysis.

In this tutorial review we give a concise and general overview of the development of imaging analytical techniques from its early stages in the late 1950s up to the present. Analytical techniques that are available for the characterization of the atomic and molecular composition as well as the structure at the bulk level often fail for the analysis of heterogeneous materials. Over the last 50 years a number of specialized analytical techniques were developed - or adapted from existing techniques - that, with time, matured into powerful tools for visualizing structural and compositional heterogeneity in nanotechnology and for the study of natural objects. These techniques evolved first at the microscopic and then the mesoscopic level (the range 100-1,000 nm), and later onto the nanoscopic scale between a few nm and 100 nm, where quantum effects start affecting the properties of materials.

Cytosolic distribution of Cd, Cu and Zn, and metallothionein levels in relation to physiological changes in gibel carp (Carassius auratus gibelio) from metal-impacted habitats.

In the present study the impact of environmental metal contamination in gibel carp (Carassius auratus gibelio) was investigated coupling disturbances in subcellular metal distribution to effect biomarkers. Gibel carp were caught at six different sampling sites in Flanders (Belgium), characterized by different degrees in environmental metal contamination. Tissue Cd, Cu and Zn concentrations and total metallothioneon (MT) levels were determined in gills, liver and kidney. Cytosolic metal distribution was measured in the main accumulating organs, liver and kidney, revealing tissue- and metal-dependent profiles. The MT pool dominated the cytosolic distribution profile. Although the importance of the MT pool increased with increasing environmental and cytosolic metal concentrations, also an undefined fraction of Cu and Cd fractions (probably free metal ions or metals bound to small organic complexes) increased at the most contaminated sampling sites. Disturbances in serum ion concentrations, serum alanine aminotransferase activity (ALT), hematocrite and condition factor were measured, as indicators of toxic effects. At the sampling site with the highest environmental Cd pollution a significant decrease in serum Ca(2+) concentrations and a significantly increased serum ALT activity were measured suggesting incomplete detoxification of Cd. Increased serum ALT concentrations suggested structural liver damage. The fact that the liver tissue, and probably also the kidney, could not cope with this high Cd burden in combination with the increased uptake of dissolved Cd through the gills most probably contributed to the perturbed serum Ca(2+) homeostasis.

A field survey of metal binding to metallothionein and other cytosolic ligands in liver of eels using an on-line isotope dilution method in combination with size exclusion (SE) high pressure liquid chromatography (HPLC) coupled to Inductively Coupled Plasma time-of-flight Mass Spectrometry (ICP-TOFMS).

The effect of metal exposure on the accumulation and cytosolic speciation of metals in livers of wild populations of European eel with special emphasis on metallothioneins (MT) was studied. Four sampling sites in Flanders showing different degrees of heavy metal contamination were selected for this purpose. An on-line isotope dilution method in combination with size exclusion (SE) high pressure liquid chromatography (HPLC) coupled to Inductively Coupled Plasma time-of-flight Mass Spectrometry (ICP-TOFMS) was used to study the cytosolic speciation of the metals. The distribution of the metals Cd, Cu, Ni, Pb and Zn among cytosolic fractions displayed strong differences. The cytosolic concentration of Cd, Ni and Pb increased proportionally with the total liver levels. However, the cytosolic concentrations of Cu and Zn only increased above a certain liver tissue threshold level. Cd, Cu and Zn, but not Pb and Ni, were largely associated with the MT pool in correspondence with the environmental exposure and liver tissue concentrations. Most of the Pb and Ni and a considerable fraction of Cu and Zn, but not Cd, were associated to High Molecular Weight (HMW) fractions. The relative importance of the Cu and Zn in the HMW fraction decreased with increasing contamination levels while the MT pool became progressively more important. The close relationship between the cytosolic metal load and the total MT levels or the metals bound on the MT pool indicates that the metals, rather than other stress factors, are the major factor determining MT induction.

Determination of trace elements in natural waters by inductively coupled plasma time of flight mass spectrometry after flow injection preconcentration in a knotted reactor.

A flow injection on-line sorption system was developed for the separation and preconcentration of traces of Ag, Cd, Co, Ni, Pb, U and Y from natural water samples with subsequent detection by ICP TOF MS. Simultaneous preconcentration of the analytes was achieved by complexation with the chelating reagent 1-phenyl-3-methyl-4-benzoylpyrazol-5-one immobilized on the inner walls of a (200cm x 0.5mm) PTFE knotted reactor. The analytes were eluted and transported to an axial ICP TOF MS system with 1% (v/v) HNO(3) containing 0.3microg l(-1) of Rh as an internal standard using ultrasonic nebulization. The detection limits (3sigma) varied from 0.3ng l(-1) for Y to 15.2ngl(-1) for Ni and the precision (R.S.D.) was better than 4%. Using a loading time of 90s and a sample flow rate of 4.5ml min(-1), enhancement factors of 3-14 were obtained for the different analytes in comparison with their direct determination by ICP TOF MS with ultrasonic nebulization without preconcentration. The accuracy of the method was demonstrated by analysis of water based certified reference materials.

Anion-exchange high performance liquid chromatography hyphenated to inductively coupled plasma-isotope dilution-time-of-flight mass spectrometry for speciation analysis of metal complexes with metallothionein isoforms in gibel carp (Carassius auratus gibelio) exposed to environmental metal pollution.

The capability of post-column isotope dilution (ID) combined with anion-exchange HPLC-ICP-time-of-flight (TOF)-MS was for the first time investigated for environmental quality assessment through metal speciation analysis of metallothionein (MT) isoforms in cytosols of gibel carp (Carassius auratus gibelio), used as biomarkers for environmental metal exposure. A full spectral scanning of the biological sample (with 50 microl injection volume) using ICP-TOF-MS in transient mode allowed fast multi-isotope screening of cytosolic metal-containing fractions and to investigate the presence of matrix-induced interferences. The MT cytosolic fraction of liver and kidney of the carp, sampled at three different sampling sites in Belgium, was partially purified using size-exclusion (SE) HPLC. Quantification of the elements Cd (toxic) and Zn and Cu (essential) associated with MT isoforms in this fraction was addressed using an hybrid approach based on post-column addition of the enriched isotopes 65Cu, 67Zn, 106Cd and monitoring on-line the isotope ratios 63Cu/65Cu, 64Zn/67Zn and 114Cd/106Cd by ICP-MS with a time of flight instrument, which was coupled to anion-exchange HPLC. With this separation method, baseline separation of up to five MT isoforms, which is required for quantitative metal speciation by HPLC-ICP-IDMS, was achieved within a run of 15 min. The MT fraction of the cytosols was also analysed for the total metal content using IDMS with size-exclusion HPLC-ICP-MS and species-unspecific calibration. Results showed significant differences between speciation results and total MT concentrations of control fish and fish from the most contaminated sampling sites, revealing the potential of gibel carp MT for sequestering excess intracellular free-ions (essential and toxic elements) and for its protection against metal toxicity. Preferences for metal sequestration of metal complexes with MT isoforms were also found to be tissue-specific: excess of Cd was found preferably bound to a major MT isoform (tR = 8.0 min) in kidney, whereas excess intracellular Zn appeared to be mostly sequestered by four MT isoforms (tR=7.3, 8.0, 12.2 and 14.4 min) in liver, the MT form with tR = 8.0 min being the main Zn scavenger form. Such kind of quantitative speciation information on the preferences of MT isoforms in different fish organs for sequestering heavy metals, reported here for the first time, is important to elucidate the role of isoform-specific induction of vertebrate fish MT in metal detoxification and the use of MT as biomarker.

Effectiveness of leaded petrol phase-out in Tianjin, China based on the aerosol lead concentration and isotope abundance ratio.

The phase-out of leaded petrol has been a measure widely used to reduce atmospheric lead pollution. Since the 1980s, China began to promote unleaded petrol. In order to assess the effectiveness of the measure an isotope fingerprint technique was applied for aerosol samples in the city of Tianjin. After dilute acid leaching, the lead concentration and isotope abundance ratios were determined for 123 samples collected in Tianjin during eight years (1994-2001). The 206Pb/207Pb ratio was lower in summer, when coal combustion emission was low and vehicle exhaust became more important, indicating that the 206Pb/207Pb ratio of leaded petrol in Tianjin is lower than that of aerosol samples. The 206Pb/207Pb ratio gradually increased from 1994 to 2001, a trend that suggests that the contribution from vehicle exhaust was diminishing. Overall, the measurements matched well with national statistical data of leaded and unleaded petrol production. After the nationwide switch to unleaded gasoline, comprehensive control measures are urgently needed to reduce air lead pollution in China, as aerosol lead reduced slightly but remains at a relatively high level.

Static secondary ion mass spectrometry (S-SIMS) for the characterization of surface components in mineral particulates.

The feasibility of static secondary ion mass spectrometry (S-SIMS) for the detection of molecule specific information from complex materials, such as natural clay and soil samples, has been investigated. Ion trap (IT), as well as triple quadrupole (TQ) instruments, have been used for mass analysis. Secondary ion images have been acquired using time-of-flight (TOF) S-SIMS. The generation of molecular adduct ions from thin and thick layers on the mineral substrates has been investigated using KBr as a simple model system. Results show that molecular adducts of KBr can be indeed detected from the spiked materials. However, the concentrations of the spiking solutions have to be significantly larger than expected from the surface area measured by gas adsorption techniques. In addition imaging analysis has evidenced that the detection of adduct ions in the mass spectra directly relates to the presence of local micro-crystallites.

Feasibility of analyzing molecular pigments in paint layers using TOF S-SIMS.

A first attempt to measure the molecular compositions of pigments in paintings using static SIMS was made. An investigation of pellets of pure pigments such as auripigment and verdigris allowed the detection of numerous high m/z ions useful for molecular identification. Analysis of pigments in embedded paint fragments, on the other hand, only yielded elemental information because of charge build-up and contamination problems. Optimization of the form in which the sample is presented to the analysis method is obviously the price to pay for the ultimate sensitivity and information depth of S-SIMS.

Effect of the interface on separation in multicapillary gas chromatography-based hyphenated techniques for speciation analysis of organometallic compounds.

This paper reports the effect of transfer line (TL) internal diameter (i.d.) on gas chromatographic separation characteristics such as efficiency and speed, when a multicapillary (MC) column is used for speciation analysis of mercury. Five different TL consisting of fused-silica capillaries with 0.15, 0.20, 0.25, 0.32, and 0.53 mm i.d. are compared. The separation efficiency and total chromatographic run time are critically affected by the i.d. of the TL. Narrow capillaries (i.d.< or =0.20 mm) produce minimum peak dispersion whereas wide capillaries result in narrow peaks and shorter chromatographic analysis times. A thermodynamic approach is proposed to describe the motion of the analytes through the separation column and TL. The model provides good agreement with the experimental data for high pressures (> or =35 psig) and wide TL (> or =0.25 mm i.d.).

Speciation analysis of mercury by solid-phase microextraction and multicapillary gas chromatography hyphenated to inductively coupled plasma-time-of-flight-mass spectrometry.

This paper reports the development of an analytical approach for speciation analysis of mercury at ultra-trace levels on the basis of solid-phase microextraction and multicapillary gas chromatography hyphenated to inductively coupled plasma-time-of-flight mass spectrometry. Headspace solid-phase microextraction with a carboxen/polydimethylsyloxane fiber is used for extraction/preconcentration of mercury species after derivatization with sodium tetraethylborate and subsequent volatilization. Isothermal separation of methylmercury (MeHg), inorganic mercury (Hg2+) and propylmercury (PrHg) used as internal standard is achieved within a chromatographic run below 45 s without the introduction of spectral skew. Method detection limits (3 x standard deviation criteria) calculated for 10 successive injections of the analytical reagent blank are 0.027 pg g(-1) (as metal) for MeHg and 0.27 pg g(-1) for Hg2+. The repeatability (R.S.D., %) is 3.3% for MeHg and 3.8% for Hg2+ for 10 successive injections of a standard mixture of 10pg. The method accuracy for MeHg and total mercury is validated through the analysis of marine and estuarine sediment reference materials. A comparison of the sediment data with those obtained by a purge-and-trap injection (PTI) method is also addressed. The analytical procedure is illustrated with some results for the ultra-trace level analysis of ice from Antarctica for which the accuracy is assessed by spike recovery experiments.

Three-dimensional trace element analysis by confocal X-ray microfluorescence imaging.

A three-dimensional (3D) variant of scanning micro X-ray fluorescence (XRF) is described and evaluated at the ID18F instrument of the European Synchrotron Radiation Facility (ESRF). The method is based on confocal excitation/detection using a polycapillary half-lens in front of the energy-dispersive detector. The experimental arrangement represents a significant generalization of regular two-dimensional (2D) scanning micro-XRF and employs a detector half-lens whose focus coincides with that of the focused incoming beam. The detection volume defined by the intersection of the exciting beam and the energy-dependent acceptance of the polycapillary optics is 100-350 mum(3). Minimum detection limits are sub-ppm, and sensitivities are comparable with regular scanning XRF. Next to the reduction of in-sample single/multiple scattering, the setup provides the possibility of sample depth scans with an energy-dependent resolution of 10-35 mum in the energy range of 3-23 keV and the possibility of performing 3D-XRF analysis by simple XYZ linear scanning. This provides a suitable alternative to X-ray fluorescence tomography. The method is illustrated with results of the analysis of solid inclusions in diamond and fluid inclusions in quartz.

Systematization of the mass spectra for speciation of inorganic salts with static secondary ion mass spectrometry.

The analytical use of mass spectra from static secondary ion mass spectrometry for the molecular identification of inorganic analytes in real life surface layers and microobjects requires an empirical insight in the signals to be expected from a given compound. A comprehensive database comprising over 50 salts has been assembled to complement prior data on oxides. The present study allows the systematic trends in the relationship between the detected signals and molecular composition of the analyte to be delineated. The mass spectra provide diagnostic information by means of atomic ions, structural fragments, molecular ions, and adduct ions of the analyte neutrals. The prediction of mass spectra from a given analyte must account for the charge state of the ions in the salt, the formation of oxide-type neutrals from oxy salts, and the occurrence of oxidation-reduction processes.

Induction and binding of Cd, Cu, and Zn to metallothionein in carp (Cyprinus carpio) using HPLC-ICP-TOFMS.

The binding of Cd, Cu, and Zn to metallothionein in carp was studied under control and acute Cd exposure scenarios. Carp were exposed to different Cd concentrations for 96 h. Total (Cu, Cd, Zn)-MT levels were determined by the cadmium thiomolybdate saturation assay. Total tissue and cytosolic Cd, Cu, and Zn concentrations were determined by ICP-MS. The cytosolic metal speciation was determined by high pressure liquid chromatography (size-exclusion [SE] in combination with anion exchange [AE]) directly coupled to an inductively coupled plasma time of flight mass spectrometer (ICP-TOFMS). This coupled technique allows the chromatographic separation and online determination of the metals associated to the protein fractions separated. Very strong differences in the tissue compartmentalization and cytosolic speciation of the metals were observed. For example, over 30% of cytosolic zinc was bound to MT in liver while this was only 2% in the kidneys although total cytosolic levels were considerably higher. Induction of metallothionein during cadmium exposure was also tissue specific, displaying different response patterns in gills, liver, and kidney. Cadmium accumulated much stronger in liver and kidney compared to the gills and the latter also showed much lower MT levels. The renal MT-induction was more sensitive to Cd exposure than the hepatic MT induction since a significant increase of Cd-MT and total MT levels occurred at lower tissue Cd concentrations in the kidney in comparison to the liver, except for the highest Cd exposure level where a drastic 10-fold increase in hepatic Cd-MT was observed. At this Cd exposure level also an apparent spill over of zinc to the high molecular weight fraction was observed in the kidneys.

Multi-element speciation of metalloproteins in fish tissue using size-exclusion chromatography coupled "on-line" with ICP-isotope dilution-time-of-flight-mass spectrometry.

An on-line isotope dilution (ID) method in combination with the coupling of size-exclusion high-performance liquid chromatography (SE-HPLC) to an axial inductively coupled plasma time-of-flight mass spectrometer (ICP-TOFMS) was applied to the quantitative speciation of Cu, Zn and Cd in carp and eel cytosols. Quantitative information on the distribution of essential and toxic metals between the different molecular weight fractions in kidney cytosols of control and Cd exposed carp was obtained with species-unspecific spiking by post-column addition of the enriched isotopes 65Cu, 67Zn and 106Cd. The isotope ratios 63Cu/65Cu, 64Zn/67Zn and 114Cd/106Cd, were monitored by ICP-TOFMS in transient signal mode. The determination of the total cytosolic element concentration was performed by flow injection conventional nebulization ICP-TOFMS. Speciation differences were encountered between control and Cd-stressed carp, indicating that quantitative speciation studies might be useful for ecotoxicological and biomonitoring purposes. Application of this methodology to quantitation of metals associated with metallothioneins (MT) in European eel, sampled at three different sites in Flanders, Belgium was also addressed. A significant increase of the amount of Cd, Cu and Zn bound to hepatic MT was observed with the increase of the total metal and MT concentrations of hepatic eel tissue.

A Monte Carlo model for studying the microheterogeneity of trace elements in reference materials by means of synchrotron microscopic X-ray fluorescence.

Synchrotron micro-XRF, a trace-level microanalytical method, allows quantitative study of the nature and degree of heterogeneity of inorganic trace constituents in solid materials with a homogeneous matrix. In this work, the standard reference materials NIST SRM 613, Trace Elements in 1 mm Glass Wafers, and NIST SRM 1577a, Trace Elements in Bovine Liver, are examined at the 10100-ng mass level using X-ray beams of 5-150 microm in diameter. A procedure based on a large number of repeated analyses of small absolute amounts of the SRMs allows calculation of the minimal representative mass of the standard. The microheterogeneity of both NIST SRM 613 and NIST SRM 1577a was investigated with the aim of evaluating their suitability as reference materials for trace-level microanalytical techniques. A Monte Carlo simulation model was constructed for both homogeneous and heterogeneous materials to elucidate the dependence of the calculated minimal representative mass on the total analyzed mass in the case of materials that showstrongly heterogeneous features at the microscopic level.