Effect of 38% silver diamine fluoride on fracture resistance of leucite reinforced feldspathic ceramic CAD/CAM class I inlay restorations.

INTRODUCTION: Silver diamine fluoride (SDF) is a topical agent that has recently gained popularity for its ability to stop and prevent dental caries.

Psychometric evaluation of the child oral impacts on daily performances (C-OIDP) for use in Turkish primary school children: a cross sectional validation study.

BACKGROUND: As patient-reported outcome, the Child Oral Impacts on Daily Performances (C-OIDP) has been commonly used for assessing children's oral health needs in order to facilitate oral health service planning. It was translated and cross-culturally adapted into Turkish in 2008. Since then, there is no study to assess its psychometric properties in Turkish child population. This cross-sectional study aimed to investigate the psychometric properties and factor structure of the Turkish version of the C-OIDP for use in Turkish primary school children. METHODS: The Turkish translated version was tested on a convenience sample of primary school children aged 11 to 12 years attending two public schools in Istanbul. Data were collected by clinical examinations, face-to-face interviews and self-completed questionnaires. The internal consistency, test-retest reliability, construct validity using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA), criterion related validity (concurrent and discriminant) were evaluated. RESULTS: A total of 208 children were subjected to the tested the C-OIDP. Overall, 93.7% of them reported at least one oral impact in the last 3 months. The most frequently affected performances were "eating" (72.1%) and "cleaning mouth", while the performance with the lowest impact was "studying" (13%). The internal consistency and reproducibility of the C-OIDP were acceptable, with a Cronbach's alpha of 0.73 and an intra-class correlation coefficient of 0.83. The EFA yielded a two-factor model termed "functional limitation" and "psychosocial limitation". CFA identified the two- factor model which fit the data better than the previously proposed three-factor model, namely physical, psychological and social health. Having malocclusion, the presence of gum disease, reported history of oral problems in the mouth, dissatisfaction with oral health, bad self-rated oral health and having a problem-oriented pattern of dental attendance were found to be the most important factors related to worse oral health- related quality of life, supporting its criterion-related validity. CONCLUSION: This study provided preliminary evidence the psychometric properties of the C-OIDP index among Turkish school children aged 11-12 years. It may be applied to evaluate the oral health impact on quality of life in this population.

Comparative evaluation of microleakage of nano-filled resin-modified glass ionomer: An in vitro study.

OBJECTIVE: This in vitro study evaluated the microleakage of a nano-filled resin-modified glass ionomer and a high viscosity glass-ionomer restorations in class V cavities. MATERIALS AND METHODS: Thirty-two class V cavities prepared on the buccal and lingual surfaces of 16 sound, third molar teeth were randomly assigned into two groups and restored by one of the glass ionomer material; Group A: A high viscosity (Ketac Molar, 3M ESPE) Group B: A nano-filled resin-modified (Ketac N100, 3M ESPE) glass ionomer. One clinician prepared all the cavities. The materials were used according to the manufacturers' recommendations. The restored teeth were then stored in distilled water at 37°C for 24 h, thermocycled at 5-55°C for 1000 cycles. The specimens were immersed in aqueous solution of Indian ink dye for 48 h at room temperature. They were embedded in resin polyester and sectioned longitudinally in a buccolingual direction. Microleakage was assessed according to the depth of dye penetration along the restoration. The extent of dye penetration at the occlusal and gingival margins was assessed using a stereo microscope. Randomly selected samples from each group were prepared for scanning electron microscope evaluation. The data were statistically analyzed with Friedman and Wilcoxon signed ranks tests. RESULTS: There were statistically significant differences between the microleakage scores of the two groups for both occlusal and gingival scores (P = 0.001). Occlusal and gingival scores for high viscosity glass ionomer (P = 0.024) and nanoionomer (P = 0.021) using Wilcoxon signed ranks tests showed statistically significant differences. High viscosity glass ionomer showed significantly less microleakage compared to the nano-filled resin-modified glass-ionomer (RMGIs) at occlusal margin (P = 0.001). No significant differences were found between the groups at gingival margin (P = 0.0317). CONCLUSION: Within the limitations of this in vitro study, nano-filled RMGIs restorations did not perform better than high viscosity glass ionomer in class V cavities in terms of microleakage assessment.

Lidocaine versus mepivacaine in sedated pediatric dental patients: randomized, prospective clinical study.

UNLABELLED: Dental anxiety is usually seen in the pediatric patients. specially in the case of minor oral surgical procedures and exodontia, cooperation of the patients and their families with the dentist will lead to superior treatment outcomes. Pain control is important in dentistry. The aim of this randomized prospective clinical study is to compare the local anaesthetic and haemodynamic effects of 2% lidocaine (Group 1) and 3% mepivacaine (Group 2) in sedated pediatric patients undergoing primary tooth extraction. STUDY DESIGN: 60 pediatric patients undergoing sedation for elective primary tooth extraction was prospectively included in the study in a randomized fashion. Inclusion and exclusion criteria were assigned. Patients were given premedication via oral route. Local anesthesia was achieved before extraction(s). RESULTS: There were no significant differences between the groups in patient demographics, number of teeth extracted, duration of the operation and time from the end of the procedure to discharge (p ≥ 0.05). FLACC pain scale scores were not statistically significant between the groups, except at 20 minutes post-operatively when the score is significantly lower in Group 2 (p=0.029). CONCLUSION: Prevention of pain during dental procedures can nurture the relationship of the patient and dentist. Tooth extraction under sedation in pediatric patients could be safe with both local anesthetics.

Monomer Release from Resin Based Dental Materials Cured With LED and Halogen Lights.

OBJECTIVES: To measure the release of TEGDMA and BisGMA from two commercially available composite resins; Filtek Z 250 (3M ESPE, Germany), Leaddent (Leaddent, Germany) and two fissure sealants; Helioseal F (3M ESPE, Germany) Enamel Loc (Premiere Rev, USA) over 1, 3 and 7 days after polymerization with standard quartz-tungsten halogen Coltolux II (QHL) (Coltene Switzerland) and a standard blue light emitting diode Elipar Freelight 2 (3M ESPE, Germany). METHODS: 9 samples of each material were placed in disc shaped specimens in 1 mm of thickness and 10 mm in diameter (n=36). Each material was polymerized using LED for 20 s (n=12), 40 s (n=12) and halogen for 40 s (n=12), respectively. High Performance Liquid Chromatography (HPLC) was used to measure the amount of monomers released over 1, 3 and 7 days. Data was analyzed using one way ANOVA and Bonferroni test for multiple comparisons with a significance level of .05. RESULTS: LED 20 sec group showed the highest release of monomers at 1, 3 and 7 days in sealant groups. Halogen 40 sec group resulted highest release of monomers for Leaddent at all time intervals (P<.05) CONCLUSIONS: Efficiency of the curing unit and applying the recommended curing time of the light activated resin based dental materials is very important to protect the patient from potential hazards of residual monomers.

Treatment of sequelae in permanent dentition after severe trauma in primary dentition.

A case with a dilacerated upper right central and hypoplastic upper right lateral incisors covered with gingiva of a 10-year-old female, with a history of trauma at the age of 18 months, is presented. After clinical and radiographical evaluations, esthetic problem was solved with gingivectomy followed by composite restorations of the involved teeth.

Effects of light curing method and exposure time on mechanical properties of resin based dental materials.

OBJECTIVES: The aim of this study was to investigate microhardness and compressive strength of composite resin (Tetric-Ceram, Ivoclar Vivadent), compomer (Compoglass, Ivoclar, Vivadent), and resin modified glass ionomer cement (Fuji II LC, GC Corp) polymerized using halogen light (Optilux 501, Demetron, Kerr) and LED (Bluephase C5, Ivoclar Vivadent) for different curing times. METHODS: Samples were placed in disc shaped plastic molds with uniform size of 5 mm diameter and 2 mm in thickness for surface microhardness test and placed in a diameter of 4 mm and a length of 2 mm teflon cylinders for compressive strength test. For each subgroup, 20 samples for microhardness (n=180) and 5 samples for compressive strength were prepared (n=45). In group 1, samples were polymerized using halogen light source for 40 seconds; in group 2 and 3 samples were polymerized using LED light source for 20 seconds and 40 seconds respectively. All data were analyzed by two way analysis of ANOVA and Tukey's post-hoc tests. RESULTS: Same exposure time of 40 seconds with a low intensity LED was found similar or more efficient than a high intensity halogen light unit (P>.05), however application of LED for 20 seconds was found less efficient than 40 seconds curing time (P=.03). CONCLUSIONS: It is important to increase the light curing time and use appropriate light curing devices to polymerize resin composite in deep cavities to maximize the hardness and compressive strength of restorative materials.