Age-related differences in morphology and kinematics of the native hip.

Our objectives were to clarify morphology of the hip as well as infinitesimal femoral head movement in specific positions in young and elderly volunteers without joint degeneration. Both hips of 20 young and 20 elderly healthy volunteers were examined. Magnetic resonance imaging was performed at four different positions for each hip: neutral, 45° flexion, 15° extension, and the Patrick position. Femoral and pelvic bone images were separately extracted when in the neutral position and superimposed over the images of each different position by using voxel-based registration. The distance between the acetabular center and the femoral head center (FHC) at the neutral position was defined as 3D-migration. The distance between FHCs at neutral position and that at each different position was defined as 3D-translation. The x-, y-, and z-axes pointed in the anterior, cranial, and lateral directions, respectively. 3D-migration-y in the elderly was more caudal than that in the young (P < .001). 3D-translation of 45° flexion in the elderly was larger than that in the young with statistical significance (P = .001), while 3D-translation of the Patrick position in the elderly was smaller than that in the young (P = .012). Age was significantly correlated with 3D-translation in 45° flexion (r = .431; P < .001) and that in Patrick (r = -.296; P = .008). These results can be used as a basis for the natural course with aging of morphometry and kinematics of the hip, as well as for potential disease progression in osteoarthritis of the hip.

Influence of femoral bowing on range of motion after total hip arthroplasty.

PURPOSE: The influence of physiologic femoral bowing on range of motion (ROM) after total hip arthroplasty (THA) remains unknown. The purpose of this study was to investigate the morphology of the femur in patients who underwent THA, and to analyze the influence of femoral bowing on ROM due to implant impingement after THA. METHODS: The ROM was calculated from 100 hips in 90 patients who underwent THA using computed tomography data with a 3D dynamic analysis software. Lateral and anterior bowing angles of the femur were measured. A modular implant (Modulus system, Lima Corporate, Villanova di San Daniele del Friuli, Italy) was used for simulation. In all subjects, cup inclination, anteversion, and stem anteversion were set to 40°, 15°, and 30°, respectively. Multiple linear regression analyses were performed to assess the relationship between the morphology of the femur and ROM. RESULTS: Lateral bowing of the femur was demonstrated to be significantly correlated with age (r = 0.361, p < 0.001) and female sex (r = 0.315, p = 0.001). Lateral bowing of the femur was significantly positively correlated with flexion and internal rotation (Int-R) with 90° flexion. Anterior bowing was significantly associated with decreasing flexion, decreasing Int-R with 90° flexion and increasing Int-R with 45° flexion and 15° adduction. CONCLUSIONS: A ROM-optimized cup position cannot be calculated from femoral stem anteversion values alone; therefore, when surgeons position the cup in relation to the femoral stem anteversion, the influence of femoral bowing may also require consideration.

Chronological Changes in Axial Alignment of the Ipsilateral Hip and Knee After Total Hip Arthroplasty.

BACKGROUND: Internal rotation of the hip and lateral patellar tilt increases after total hip arthroplasty (THA). However, it remains unknown whether these parameters change with time after the index THA. METHODS: A total of 91 patients undergoing 2-stage bilateral primary THAs between January 2008 and May 2014 were included to assess the association of chronological changes in internal rotation of the hip or lateral patellar tilt with anthropometric and perioperative parameter and changes in alignment after the index THA. Chronological changes were assessed as changes between postoperative computed tomography on the index surgery and the preoperative computed tomography on the contralateral THA. Internal rotation of the hip was defined as the angle between the posterior intercondylar line and a line passing through the posterior inferior iliac spines. Lateral patellar tilt was defined as the angle between the posterior intercondylar line and a line joining the medial and lateral edges of the patella. RESULTS: Internal rotation of the hip and lateral patellar tilt changed until 2 years after the index surgery by a mean of -2° (range -17.3° to 17.7°) and -2° (range -18.2° to 5.3°), respectively. Adductor tenotomy was associated with increasing internal rotation of the hip with time (adjusted R2 0.076); leg lengthening and larger preoperative femorotibial angle were associated with decreasing lateral patellar tilt with time (adjusted R2 0.159). CONCLUSION: Both internal rotation of the hip at rest and lateral patellar tilt decreased by approximately 2° until 2 years after surgery and there was a large variation in chronological change.

Morphological analysis of the acetabular cartilage surface in elderly subjects.

PURPOSE: The geometry of acetabular cartilage surface plays an important role in hip joint biomechanics. The aim of this study was to analyze the morphology of acetabular articular cartilage surface in elderly donated bodies to science using a 3D-digitizer. METHODS: Twenty hemipelves from 12 subjects (mean ages 85 years) were scanned with 3D-digitizer. Each acetabular surface model was divided into four regions: anterosuperior (AS), anteroinferior (AI), posterosuperior (PS), and posteroinferior (PI). In the global acetabulum and each region, the acetabular sphere radius and the standard deviation (SD) of the distance from the acetabular sphere center to the acetabular cartilage surface were calculated. In the global acetabulum, the distance between the acetabular surface model and the maximum sphere which did not penetrate over the acetabular surface model was calculated as the inferred femoral head, and then the distribution was mapped at intervals of 0.5 mm. RESULTS: The SD in AS was significantly larger than that in AI (p = 0.006) and PI (p = 0.001). The SD in PS was significantly larger than that in PI (p = 0.005). The closest region (0-0.5 mm) tended to be distributed at anterior or posterosuperior acetabular edge. CONCLUSIONS: The contact between the femoral head and acetabulum might start at the periphery of the lunate surface, especially in the anterior or posterosuperior region. From viewpoint of acetabular morphology, the acetabular articular cartilage in the anterior or posterosuperior edge could be more vulnerable due to direct contact mechanism.

In vivo hip joint contact distribution and bony impingement in normal and dysplastic human hips.

Our objectives were to clarify the 3D articular contact areas of the in vivo normal hip joint and acetabular dysplasia during specific positions using magnetic resonance imaging (MRI), voxel-based registration, and proximity mapping. Forty-two normal and 24 dysplastic hips were examined. MRI was performed at four positions: neutral; 45° flexion; 15° extension; and the Patrick position. Femur and pelvis bone models were reconstructed at the neutral position and superimposed over the images of each different position using voxel-based registration. The inferred cartilage contact and bony impingement were investigated using proximity mapping. The femoral head translated in the anterior or posteroinferior, anterosuperior, and posteroinferior direction from neutral to 45° flexion, 15° extension, and the Patrick position, respectively. Multiple regression analyses showed age, femoral head sphericity, and acetabular sphericity to be associated with higher hip instability. The present technique using subject-specific models revealed the in vivo hip joint contact area in a population of healthy individuals and dysplastic patients without radioactive exposure. These results can be used for analyzing disease progression in the dysplastic hip and pathogenesis of acetabular labral tear.

Verification of the Robin and Graham classification system of hip disease in cerebral palsy using three-dimensional computed tomography.

AIM: We evaluated the validity of the Robin and Graham classification system of hip disease in cerebral palsy (CP) using three-dimensional computed tomography in young people with CP. METHOD: A total of 91 hips in 91 consecutive children with bilateral spastic CP (57 males, 34 females; nine classified at Gross Motor Function Classification System level II, 42 at level III, 32 at level IV, and eight at level V; mean age 5 y 2 mo, SD 11 mo; range 2-6 y) were investigated retrospectively using anteroposterior plain radiographs and three-dimensional computed tomography (3D-CT) of the hip. The migration percentage was calculated on plain radiographs and all participants were classified into four groups according to migration percentage: grade II, migration percentage ≥ 10% but ≤ 15%, (four hips), grade III, migration percentage >15% but ≤ 30%, (20 hips); grade IV, migration percentage >30% but <100%, (63 hips); and grade V, migration percentage ≥ 100%, (four hips). The lateral opening angle and the sagittal inclination angle of the acetabulum, the neck-shaft angle, and the femoral anteversion of the femur were measured on 3D-CT. RESULTS: The three-dimensional quantitative evaluation indicated that there were significant differences in the lateral opening angle and the neck-shaft angle between the four groups (Kruskal-Wallis test, p ≤ 0.001). INTERPRETATION: This three-dimensional evaluation supports the validation of the Robin and Graham classification system for hip disease in 2- to 7-year-olds with CP.

In vivo kinematic analysis of squatting after total hip arthroplasty.

BACKGROUND: The in vivo kinematics of squatting after total hip arthroplasty is unclear. The purpose of the present study was to determine the range of motion of the hip joint during squatting after total hip arthroplasty. METHODS: Using fluoroscopy, we investigated 15 primary cementless total hip arthroplasties performed using a computed tomography-based navigation system. An acetabular component with concavities around the rim and a femoral component with reduced neck geometry were used. The motion of the acetabular and femoral components based on the neutral standing position was analyzed using a two-dimensional to three-dimensional registration technique. FINDINGS: No prosthetic impingement occurred in any hips. The mean maximum hip flexion range of motion was 86.2° (range, 55.1°-117.4°) and was not always consistent with maximum squatting. The mean maximum pelvic posterior tilting angle was 25.7° (range, 5.5°-43.5°). The pelvis began to tilt posteriorly at 50°-70° of the hip flexion range of motion. At maximum squatting, the mean ratio of the pelvic posterior tilting angle to the femoral flexion angle was 23.2% (range, 3.8%-45.7%). The mean minimum angle up to the theoretical prosthetic impingement was 26.2° (range, 11.8°-39.8°). INTERPRETATION: Although this is a preliminary study, three-dimensional assessment of dynamic squatting motion after total hip arthroplasty using the two-dimensional to three-dimensional registration technique appears to enable elucidation of the range of motion of the hip joint, the contribution of pelvic posterior tilting, and the minimum angle up to theoretical prosthetic impingement during squatting.