Strategies to improve the stability of amorphous solid dispersions in view of the hot melt extrusion (HME) method.

Oral administration of drugs is preferred over other routes for several reasons: it is non-invasive, easy to administer, and easy to store. However, drug formulation for oral administration is often hindered by the drug's poor solubility, which limits its bioavailability and reduces its commercial value. As a solution, amorphous solid dispersion (ASD) was introduced as a drug formulation method that improves drug solubility by changing the molecular structure of the drugs from crystalline to amorphous. The hot melt extrusion (HME) method is emerging in the pharmaceutical industry as an alternative to manufacture ASD. However, despite solving solubility issues, ASD also exposes the drug to a high risk of crystallisation, either during processing or storage. Formulating a successful oral administration drug using ASD requires optimisation of the formulation, polymers, and HME manufacturing processes applied. This review presents some important considerations in ASD formulation, including strategies to improve the stability of the final product using HME to allow more new drugs to be formulated using this method.

Dual targeting multiwalled carbon nanotubes for improved neratinib delivery in breast cancer.

The aim of this study was to develop biotinylated chitosan (Bio-Chi) decorated multi-walled carbon nanotubes (MWCNTs) for breast cancer therapy with the tyrosine kinase inhibitor, neratinib (NT). For achieving such a purpose, carboxylic acid functionalized multiwalled carbon nanotubes (c-MWCNTs) were initially decorated non-covalently with biotin-chitosan (Bio-Chi) coating for achieving a dual targeting mode; pH-dependent release with chitosan and biotin-receptor mediated active targeting with biotin. Afterwards, Bio-Chi decorated c-MWCNTs were loaded with the tyrosine kinase inhibitor, neratinib (NT). The formulation was then characterized by dynamic light scattering, FTIR and EDX. The drug loading efficiency was estimated to be 95.6 ± 1.2%. In vitro drug release studies revealed a pH-dependent release of NT from Bio-Chi decorated c-MWCNTs, with a higher drug release under acidic pH conditions. Sulforhodamine B (SRB) cytotoxicity assay of different NT formulations disclosed dose-dependent cytotoxicities against SkBr3 cell line, with a superior cytotoxicity observed with NT-loaded Bio-Chi-coated c-MWCNTs, compared to either free NT or NT-loaded naked c-MWCNTs. The IC50 values for free NT, NT-loaded c-MWCNTs and NT-loaded Bio-Chi-coated c-MWCNTs were 548.43 ± 23.1 µg mL-1, 319.55 ± 17.9 µg mL-1, and 257.75 ± 24.5 µg mL-1, respectively. Interestingly, competitive cellular uptake studies revealed that surface decoration of drug-loaded c-MWCNTs with Bio-Chi permitted an enhanced uptake of c-MWCNTs by breast cancer cells, presumably, via biotin receptors-mediated endocytosis. To sum up, Bio-Chi-decorated c-MWCNTs might be a promising delivery vehicle for mediating cell-specific drug delivery to breast cancer cells.

Nano-Formulating Besifloxacin and Employing Quercetin as a Synergizer to Enhance the Potency of Besifloxacin against Pathogenic Bacterial Strains: A Nano-Synergistic Approach.

The present study applied a nano-synergistic approach to enhance besifloxacin's potency via nano-formulating besifloxacin on gold nanoparticles (Besi-AuNPs) and adding quercetin as a natural synergistic compound. In fact, a one-pot AuNP synthesis approach was applied for the generation of Besi-AuNPs, where besifloxacin itself acted as a reducing and capping agent. Characterization of Besi-AuNPs was performed by spectrophotometry, DLS, FTIR, and electron microscopy techniques. Moreover, antibacterial assessment of pure besifloxacin, Besi-AuNPs, and their combinations with quercetin were performed on Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. UV-spectra showed a peak of AuNPs at 526 nm, and the electron microscopy-based size was estimated to be 15 ± 3 nm. The effective MIC50 concentrations of besifloxacin after loading on AuNPs were reduced by approximately 50% against the tested bacterial strains. Interestingly, adding quercetin to Besi-AuNPs further enhanced their antibacterial potency, and isobologram analysis showed synergistic potential (combination index below 1) for different quercetin and Besi-AuNP combinations. However, Besi-AuNPs and quercetin combinations were most effective against Gram-positive S. aureus in comparison to Gram-negative P. aeruginosa and E. coli. Their potent activity against S. aureus has its own clinical significance, as it is one the main causative agents of ocular infection, and besifloxacin is primarily used for treating infectious eye diseases. Thus, the outcomes of the present study could be explored further to provide better medication for eye infections caused by resistant pathogens.

Ganetespib with Methotrexate Acts Synergistically to Impede NF-κB/p65 Signaling in Human Lung Cancer A549 Cells.

Among the various types of cancer, lung cancer accounts for the highest number of fatalities across the globe. A combination of different cancer chemotherapeutics is regarded as an effective strategy for clinical management of different cancers. Ganetespib (GAN) is a well-established hsp90 inhibitor with enhanced pharmacological properties in comparison with its first-generation counterparts. Previous preclinical studies have shown that GAN exerts significant effects against cancer cells; however, its therapeutic effects against non-small cell lung cancer (NSCLC) A549 cells, achieved by modulating the expression of the NF-κB/p65 signaling pathway, remains unexplored. In this study, the combinatorial effect of GAN and methotrexate (MTX) against lung carcinomas was investigated through both in silico and in vitro studies. A combinatorial treatment regimen of GAN/MTX exerted more significant cytotoxic effects (p < 0.001) against A549 cells than individual treatments. The GAN/MTX combination also instigated nuclear fragmentation followed by augmentation in intracellular ROS levels (p < 0.001). The elevated ROS in A549 cells upon exposure to GAN/MTX combinatorial regimen was concomitantly accompanied with a remarkable reduction in mitochondrial viability. In addition, it was observed that the GAN/MTX combination succeeded in elevating caspase-3 activity and downregulating the expression levels of anti-apoptotic mediators Bcl2 and survivin in NSCLC A549 cells. Most importantly, the GAN/MTX combinatorial regimen impeded the activation of the NF-kB/p65 signaling pathway via repression of the expression of E-cadherin and N-cadherin, which was confirmed by molecular docking studies. Collectively, these findings demonstrated the synergistic effect of the GAN/MTX combinatorial regimen in suppressing the growth of A549 cells by modulating the NF-κB/p65 signaling pathway.

Production, Characterization, and In Vitro and In Vivo Studies of Nanoemulsions Containing St. John's Wort Plant Constituents and Their Potential for the Treatment of Depression.

The current project was designed to prepare an oil-in-water (oil/water) hypericin nanoemulsion using eucalyptus oil for the preparation of an oil phase with chitosan as an emulsion stabilizer. The study might be a novelty in the field of pharmaceutical sciences, especially in the area of formulation development. Tween® 80 (Polysorbate) was used as the nonionic surfactant. The nanoemulsion was prepared by using the homogenization technique, followed by its physicochemical evaluation. The surface morphological studies showed the globular structure has a nano-sized diameter, as confirmed by zeta size analysis. The zeta potential analysis confirmed a positive surface charge that might be caused by the presence of chitosan in the formulation. The pH was in the range of 5.14 to 6.11, which could also be compatible with the range of nasal pH. The viscosity of the formulations was found to be affected by the concentration of chitosan (F1-11.61 to F4-49.28). The drug release studies showed that the presence of chitosan greatly influenced the drug release, as it was noticed that formulations having an elevated concentration of chitosan release lesser amounts of the drug. The persistent stress in the mouse model caused a variety of depressive- and anxiety-like behaviors that can be counteracted by chemicals isolated from plants, such as sulforaphane and tea polyphenols. In the behavioral test and source performance test, hypericin exhibited antidepressant-like effects. The results show that the mice treated for chronic mild stress had a considerably higher preference for sucrose after receiving continuous hypericin for 4 days (p = 0.0001) compared to the animals administered with normal saline (p ≤ 0.0001) as well as the naïve group (p ≤ 0.0001). In conclusion, prepared formulations were found to be stable and can be used as a potential candidate for the treatment of depression.

Antiglycation potential of plant based TiO2 nanoparticle in D-ribose glycated BSA in vitro.

Biosynthetic procedure is one of the best alternatives, inexpensive and ecologically sound for the synthesis of titanium dioxide (TiO2 ) nanoparticles using a methanolic extract of medicinal plant. The main prospect of this study was to investigate the antiglycation activity of the TiO2 nanoparticles (TNP) prepared by ethanolic leaf extract of the Coleus scutellarioides. In this study, biosynthesized TNP characterized with UV-Visible spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscope. These TNP were further investigated with respect to their antiglycation property and it was checked in the mixture of d-ribose glycated bovine serum albumin (BSA) by measuring ketoamine, carbonyl content, Advanced glycation end products (AGEs) and aggregation of protein instigated by glycation process. The inhibitory effect of TNP to restore the structure of BSA in presence of d-ribose were also characterize by biophysical techniques mentioned above. Therefore, the findings of this study suggest repurposing of TNP for its antiglycation property that could be helpful in prevention of glycation instigated AGEs formation and structural loss of proteins.

Pulmonary Targeting of Levofloxacin Using Microsphere-Based Dry Powder Inhalation.

The objective of the current study was to develop poly (lactic-co-glycolic acid) (PLGA) microspheres loaded with the anti-tuberculosis (anti-TB) fluoroquinolone, Levofloxacin (LVX), in the form of dry powder inhalation (DPI). LVX-loaded microspheres were fabricated by solvent evaporation technique. Central Composite Design (CCD) was adopted to optimize the microspheres, with desired particle size, drug loading, and drug entrapment efficiency, for targeting alveolar macrophages via non-invasive pulmonary delivery. Structural characterization studies by differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction analysis revealed the absence of any possible chemical interaction between the drug and the polymer used for the preparation of microspheres. In addition, the optimized drug-loaded microspheres exhibited desired average aerodynamic diameter of 2.13 ± 1.24 µm and fine particle fraction of 75.35 ± 1.42%, indicating good aerosolization properties. In vivo data demonstrated that LVX-loaded microspheres had superior lung accumulation, as evident by a two-fold increase in the area under the curve AUC0-24h, as compared with plain LVX. Furthermore, LVX-loaded microspheres prolonged drug residence time in the lung and maintained a relatively high drug concentration for a longer time, which contributed to a reduced leakage in the systemic circulation. In conclusion, inhalable LVX-loaded microspheres might represent a plausible delivery vehicle for targeting pulmonary tuberculosis via enhancing the therapeutic efficacy of LVX while minimizing its systemic off-target side effects.

Development of Dapagliflozin Solid Lipid Nanoparticles as a Novel Carrier for Oral Delivery: Statistical Design, Optimization, In-Vitro and In-Vivo Characterization, and Evaluation.

Controlling hyperglycemia and avoiding glucose reabsorption are significant goals in type 2 diabetes treatments. Among the numerous modes of medication administration, the oral route is the most common. Introduction: Dapagliflozin is an oral hypoglycemic agent and a powerful, competitive, reversible, highly selective, and orally active human SGLT2 inhibitor. Dapagliflozin-loaded solid lipid nanoparticles (SLNs) are the focus of our present investigation. Controlled-release lipid nanocarriers were formulated by integrating them into lipid nanocarriers. The nanoparticle size and lipid utilized for formulation help to regulate the release of pharmaceuticals over some time. Dapagliflozin-loaded nanoparticles were formulated by hot homogenization followed by ultra-sonication. The morphology and physicochemical properties of dapagliflozin-SLNs have been characterized using various techniques. The optimized dapagliflozin-SLNs have a particle size ranging from 100.13 ± 7.2 to 399.08 ± 2.4 nm with 68.26 ± 0.2 to 94.46 ± 0.7% entrapment efficiency (%EE). Dapagliflozin-SLNs were optimized using a three-factor, three-level Box-Behnken design (BBD). Polymer concentration (X1), surfactant concentration (X2), and stirring duration (X3) were chosen as independent factors, whereas %EE, cumulative drug release (%CDR), and particle size were selected as dependent variables. Interactions between drug substances and polymers were studied using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and atomic force microscopy (AFM) analysis indicated the crystalline change from the drug to the amorphous crystal. Electron microscope studies revealed that the SLNs' structure is nearly perfectly round. It is evident from the findings that dapagliflozin-SLNs could lower elevated blood glucose levels to normal in STZ-induced diabetic rats, demonstrating a better hypoglycemic impact on type 2 diabetic patients. The in vivo pharmacokinetic parameters of SLNs exhibited a significant rise in Cmax (1258.37 ± 1.21 mcg/mL), AUC (5247.04 mcg/mL), and oral absorption (2-fold) of the drug compared to the marketed formulation in the Sprague Dawley rats.

Assessment of the Quality of Saudi Patient Information Leaflets (PILs) Based on the Accuracy of Physical Description and Frequency of Solid Dosage Forms.

The physical description of dosage forms is one of the most important considerations in avoiding patient confusion and minimizing medication errors. This study aimed to determine the quality and accuracy of the physical descriptions in patient information leaflets (PILs). This cross-sectional study constituted a total of 200 drugs and PILs that were randomly selected, by pharmacy students, from Al-Dawaa community pharmacies in the Hail region of Saudi Arabia, from January 2021 to July 2021. The drugs and PILs were thoroughly evaluated in accordance with the Gulf Cooperation Council (GCC) guidelines for PILs. The accuracy screening of the total solid dosage forms (capsules + tablets) revealed that 45% showed complete accuracy and compliance, 1.5% showed poor accuracy and compliance, and 53% showed no accuracy and no compliance with the GCC guidelines and the Saudi Food and Drug Authority (SFDA) guidelines. In the frequency test, color, shape, and imprints accounted for 95.6%, 79.1%, and 73.6%, respectively. However, the size of the dosage form was the least (2.2%) used physical description feature. These findings recommend pharmaceutical companies to pay more attention to the written physical description in their PILs. Additionally, the process of PIL approval should be optimized, evaluated, and updated systematically to ensure that they contain the essential information.

Cefotaxime Mediated Synthesis of Gold Nanoparticles: Characterization and Antibacterial Activity.

Cefotaxime (CTX) is a third-generation cephalosporin antibiotic with broad-spectrum activity against Gram negative and Gram positive bacteria. However, like other third-generation cephalosporin antibiotics, its efficacy is declining due to the increased prevalence of multidrug-resistant (MDR) pathogens. Recent advances in nanotechnology have been projected as a practical approach to combat MDR microorganisms. Therefore, in the current study, gold nanoparticles (AuNPs) were prepared using cefotaxime sodium, which acted as a reducing and capping agent, besides having well-established antibacterial activity. The synthesized cefotaxime-loaded gold nanoparticles (C-AuNPs) were characterized by UV-Visible spectroscopy, FTIR, TEM and DLS. In addition, the in vitro antibacterial activity of C-AuNPs was assessed against both Gram-positive and Gram-negative bacteria. UV-Visible spectroscopy verified the formation of C-AuNPs, while TEM and DLS verified their nano-size. In addition, CTX loading onto AuNPs was confirmed by FTIR. Furthermore, the colloidal stability of the synthesized C-AuNPs was ascribed to the higher net negative surface charge of C-AuNPs. Most importantly, the synthesized C-AuNPs showed superior antibacterial activity and lower minimum inhibitory concentration (MIC) values against Gram-negative (Escherichia coli, Klebsiella oxytoca, Pseudomonas aeruginosa) and gram-positive (Staphylococcus aureus) bacteria, compared with pure CTX. Collectively, CTX was successfully adopted, as reducing and capping agent, to synthesize stable, nano-sized spherical C-AuNPs. Furthermore, loading CTX onto AuNPs could efficiently restore and/or boost the antibacterial activity of CTX against resistant Gram-negative and Gram-positive bacteria.

Drugs repurposed: An advanced step towards the treatment of breast cancer and associated challenges.

Breast cancer (BC) is mostly observed in women and is responsible for huge mortality in women subjects globally. Due to the continued development of drug resistance and other contributing factors, the scientific community needs to look for new alternatives, and drug repurposing is one of the best opportunities. Here we light upon the drug repurposing with a major focus on breast cancer. BC is a division of cancer known as the leading cause of death of 2.3 million women globally, with 685,000 fatalities. This number is steadily rising, necessitating the development of a treatment that can extend survival time. All available treatments for BC are very costly as well as show side effects. This unfulfilled requirement of the anti-cancer drugs ignited an enthusiasm for drug repositioning, which means finding out the anti-cancer use of already marketed drugs for other complications. With the advancement in proteomics, genomics, and computational approaches, the drug repurposing process hastens. So many drugs are repurposed for the BC, including alkylating agents, antimetabolite, anthracyclines, an aromatase inhibitor, mTOR, and many more. The drug resistance in breast cancer is rising, so reviewing how the challenges in breast cancer can be combated with drug repurposing. This paper provides the updated information on all the repurposed drugs candidates for breast cancer with the molecular mechanism responsible for their anti-tumor activity. Additionally, all the challenges that occur during the repurposing of the drugs are discussed.

Ceftriaxone Mediated Synthesized Gold Nanoparticles: A Nano-Therapeutic Tool to Target Bacterial Resistance.

Ceftriaxone has been a part of therapeutic regime for combating some of the most aggressive bacterial infections in the last few decades. However, increasing bacterial resistance towards ceftriaxone and other third generation cephalosporin antibiotics has raised serious clinical concerns especially due to their misuse in the COVID-19 era. Advancement in nanotechnology has converted nano-therapeutic vision into a plausible reality with better targeting and reduced drug consumption. Thus, in the present study, gold nanoparticles (GNPs) were synthesized by using ceftriaxone antibiotic that acts as a reducing as well as capping agent. Ceftriaxone-loaded GNPs (CGNPs) were initially characterized by UV-visible spectroscopy, DLS, Zeta potential, Electron microscopy and FT-IR. However, a TEM micrograph showed a uniform size of 21 ± 1 nm for the synthesized CGNPs. Further, both (CGNPs) and pure ceftriaxone were examined for their efficacy against Escherichia coli, Staphylococcus aureus, Salmonella abony and Klebsiella pneumoniae. CGNPs showed MIC50 as 1.39, 1.6, 1.1 and 0.9 µg/mL against E. coli, S. aureus, S. abony and K. pneumoniae, respectively. Interestingly, CGNPs showed two times better efficacy when compared with pure ceftriaxone against the tested bacterial strains. Restoring the potential of unresponsive or less efficient ceftriaxone via gold nanoformulations is the most alluring concept of the whole study. Moreover, applicability of the findings from bench to bedside needs further validation.

Sustained release of curcumin self-emulsifying drug delivery system (SEDDS) from solvent-cast Soluplus® films.

The objective of the present study was to investigate the feasibility of formulating and loading Curcumin SEDDS (Self-Emulsified Drug Delivery Systems) into films made from Soluplus® as the film-forming polymer. Films with up to 30% of Curcumin SEDDS were prepared by the solvent casting technique and analyzed for their mechanical and dissolution properties. A nine-run, two-factor, three-level factorial design was utilized to investigate the effect of SEDDS load (10, 20, and 30% w/w) and film thickness (10, 25, and 40 mils) on the tensile strength, elongation, and adhesiveness of the films. The dissolution profile of the films was also investigated by a USP Type 1 method. SEDDS loading was found to plasticize Soluplus® and to yield transparent films of good mechanical properties. Increasing SEDDS load, however, was found to reduce the tensile strength of the films, while increasing their adhesiveness and elongation. On the other hand, while an increase in film thickness was found to increase the tensile strength of the films, it reduced the elongation capacity of the films. Loading SEDDS into Soluplus® films was also found to sustain their release over 6 h, where a significant delay in release was found at lower SEDDS loads. This study demonstrated that Soluplus® can be used not only to formulate SEDDS into polymeric films but also to sustain their release over an extended time.

Preparation and characterization of aqueous vitamin E/Soluplus® dispersions for film coating applications.

OBJECTIVE: The goals of this study were to (1) delineate a technique to prepare stable aqueous vitamin E/Soluplus® dispersions; (2) characterize films cast from the aqueous dispersions; and (3) demonstrate the utility of the aqueous dispersions in fluid bed coating applications. This study demonstrated the feasibility of using vitamin E in the preparation of amphiphilic film withs potential use in delayed-release coating applications. METHODS: Low viscosity aqueous vitamin E/Soluplus® dispersions were prepared by first spray drying ethanolic vitamin E/Soluplus® solutions followed by high-shear homogenization of the solid dispersions in water. Concentrated (10%) aqueous dispersions containing 0%, 10%, 20%, and 30% of vitamin E in the binary blend with Soluplus® were then cast into films and characterized for contact angle and mechanical strength by texture analysis. RESULTS: All films were hydrophilic and homogenous, which confirmed the utility of vitamin E as a plasticizer for the Soluplus® polymer. The 0% and 10% films were brittle whereas the 30% were tacky. The 20% dispersion was subsequently used to coat acetaminophen granules by a fluidized bed process to a dry weight gain of 10-30%. When tested by a dissolution study, a delay in acetaminophen release was observed as a function of weight gain. CONCLUSION: The results from this study demonstrated that it is feasible to produce stable vitamin E/Soluplus® aqueous dispersions to be used as solvent-free functional film coating materials.

An overview of SARS-COV-2 epidemiology, mutant variants, vaccines, and management strategies.

BACKGROUND: Over the last two decades, humanity has observed the extraordinary anomaly caused by novel, weird coronavirus strains, such as severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS). As the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) virus has made its entry into the world, it has dramatically affected life in every domain by continuously producing new variants. The vaccine development is an ongoing process, although some vaccines got marketed. The big challenge is now whether the vaccine candidates can provide long-lasting protection or prevention against mutant variants. METHODS: The information was gathered from various journals, electronic searches via Internet-based information such as PubMed, Google Scholar, Science Direct, online electronic journals, WHO landscape, world meters, WHO website, and News. RESULTS: This review will present and discuss some coronavirus disease 19 (COVID-19) related aspects including: the pathophysiology, epidemiology, mutant variants vaccine candidates, vaccine efficacy, and management strategies. Due to the high death rate, continuous spread, an inadequate workforce, lack of required therapeutics, and incomplete understanding of the viral strain, it becomes crucial to build the knowledge of its biological characteristics and make available the rapid diagnostic and vital therapeutic machinery for the combat and management of an infection. CONCLUSION: The data summarizes current research on the COVID 19 infection and therapeutic interventions, which will direct future decision-making on the effort-worthy phases of the COVID 19 and the development of critical therapeutics. The only possible solution is the vaccine development targeting against all variant strains to halt its progress; the identified theoretical and practical knowledge can eliminate the gaps to improve a better understanding of the novel coronavirus structure and its design of a vaccine. In addition, to that the long-lasting protection is another challenging objective that need to be looked into.

Inhalable, Spray-Dried Terbinafine Microparticles for Management of Pulmonary Fungal Infections: Optimization of the Excipient Composition and Selection of an Inhalation Device.

Terbinafine is a broad-spectrum antifungal agent with therapeutic potential against pulmonary aspergillosis. The main aim of the current study was to investigate the potential of l-leucine, alone and in combination with mannitol, to improve the performance of spray-dried terbinafine microparticles for inhalation. The study also aimed to investigate the potential of the low resistance Cyclohaler® and the high resistance Handihaler® as inhalation devices for spray-dried microparticles. To this end, eight powder inhalation formulations of terbinafine were prepared by nano spray drying via a factorial experimental design. The formulations were evaluated in vitro for their potential to deliver the antifungal drug to the lungs using the Cyclohaler® and the Handihaler®. Leucine was superior as an excipient to mannitol and to mixtures of leucine and mannitol. Using leucine as an excipient resulted in formulations with fine particle fractions of up to 60.84 ± 0.67% w/w and particle mass median aerodynamic diameters of down to 1.90 ± 0.20 µm, whereas using mannitol as an excipient resulted in formulations with fine particle fractions of up to 18.75 ± 3.46% w/w and particle mass median aerodynamic diameters of down to 6.79 ± 0.82 µm. When leucine was used as an excipient, using 50% w/w rather than 25% w/w ethanol in water as a spray solvent enhanced the dispersibility of the particles, with a mean absolute increase in the formulation fine particle fraction of 9.57% w/w (95% confidence interval = 6.40-12.73% w/w). This was potentially underlain by enrichment of the particle surfaces with leucine. The Cyclohaler® outperformed the Handihaler® as an inhalation device for the developed formulations, with a mean absolute increase in the fine particle fraction of 9.17% w/w (95% confidence interval = 8.17-10.16% w/w).

A full factorial experimental design to study the effect of flavoring agents on the mechanical properties of curcumin chewing gum tablets with high solids content.

Objective: Developing chewing gum tablets (CGTs) with high drug loads is a challenge due to the loss of mastication properties. We postulated that poor mastication properties of such gums could be improved by adjusting the concentration of liquid flavors to serve as plasticizers and consequently increase the flexibility of the elastomer in the gum base. To test this hypothesis, the objective of this work was to evaluate the effects of flavor type and concentration, and storage conditions on the textural properties of CGTs loaded with 20% curcumin (CUR) by weight.Methods: CGTs were made by directly compressing Health in Gum® base with CUR. The resultant CGTs were characterized by single and two bites textural tests to measure their yield strength, post-bite failure rate, and compressibility.Results: Flavor concentration (X2) had a significant impact on the masticatory properties of the chewing gums, which could be ascribed to the plasticizing effect of peppermint oil. Addition of liquid flavors and storage at low temperature (X4) produced CGTs with the desirable properties of low yield strength (Y1) and post-bite structural failure rate (Y2), and high compressibility (Y3). The effect of flavors however was negated at high temperatures, especially when flavored gums were stored for extended time at 50 °C. Flavor type (X1) on the other hand had no effect on the masticatory properties of the chewing gums.Conclusions: This study concluded that it is feasible to formulate CGTs with high solids content without negatively impacting their mechanical properties by controlling the concentration of liquid flavors.

D-optimal mixture design: Formulation development, mechanical characterization, and optimization of curcumin chewing gums using oppanol® B 12 elastomer as a gum-base.

Curcumin (CUR) chewing gums have potential therapeutic benefits to head and neck cancer patients. The objective of this work was to develop medicated chewing gums (MCGs) with high CUR loading and desirable mastication properties. This was accomplished by evaluating the effect of five gum ingredients: (X1) polyisobutene, (X2) polyvinyl acetate, (X3) wood rosin, (X4) wax, and (X5) CUR on the mechanical properties of the MCGs using a 25-run, five-factor, two-level D-Optimal mixture design. CUR MCGs were prepared by the conventional fusion method for making chewing gums. They were characterized by a two-bites texture and uniaxial tension tests to generate force-displacement curves from which the cohesiveness (Y1), springiness (Y2), chewiness (Y3), compressibility (Y4), resistance to extension (Y5), and extensibility (Y6) were measured. Observed responses were used to generate polynomial models correlating the independent with the dependent variables. Elasticity and stiffness of the gums were found to be readily impacted by PIB and CUR levels. Fitted models were then used to predict a gum composition that has comparable mechanical properties to commercially procured chewing gums. The optimized MCG was loaded with 50% of either CUR or CUR/SBE-ß-CD inclusion complex and tested in vitro for drug release. Although no differences in mechanical properties were observed, substituting CUR with the inclusion complex was found to significantly enhance drug release. This study highlighted the impact of each gum ingredient on the quality of the MCGs and demonstrated the feasibility of preparing chewing gums with up to 50% drug loading.

Mechanical Characterization and Dissolution of Chewing Gum Tablets (CGTs) Containing Co-compressed Health in Gum® and Curcumin/Cyclodextrin Inclusion Complex.

Curcumin chewing gums could be therapeutically beneficial if used by the head and neck cancer patients. High curcumin loading in chewing gums however is needed to achieve desired therapeutic effect. Preparing gums with high drug load is nonetheless challenging because of the negative impact of solids on their masticatory properties. The use of liquid flavors was found to partially solve this problem. The objectives of this study were to (1) determine the maximum amount of curcumin that can be loaded into co-compressed chewing gums made from Health in Gum® as the base and flavored with 1.5% peppermint oil, (2) determine if addition of sweeteners can improve the yield strength and compressibility of the gums when examined by a texture analyzer, (3) examine the effect of temperature over a storage period of one month on the physical stability of the chewing gums, and (4) study the impact of substituting curcumin with its inclusion complex with SBE-ß-CD on drug release. It was found that when flavored, Health in Gum® could load up to 25% curcumin by weight without compromising its masticatory properties. When tested for drug release, SBE-ß-CD was found to significantly increase the amount of curcumin dissolved within 30 min. Despite poor drug release from gums loaded with insoluble curcumin, the fragmentation of the gums during mastication by the Erweka tester is nonetheless expected to produce a suspension for absorption in the lower GIT. This study demonstrated how modulating gum composition and storage conditions can impact the mechanical properties of chewing gums with high solids content.

Medicated Chewing Gums (MCGs): Composition, Production, and Mechanical Testing.

Medicated chewing gums (MCGs) represent a unique platform for drug delivery. They have been defined as solid single-dose preparations, which may contain more than one active pharmaceutical ingredient (API) with base consisting primarily of gum that has to be chewed for a certain period of time. They mainly contain a tasteless masticatory gum base as the core with other minor nonmasticatory ingredients, such as flavors and sweeteners. Despite their advantages in drug delivery, MCGs remain a niche product due to the complexity of their formulation, lack of acceptable testing methods, and intricacy of their manufacturing. Few studies have been reported on their use, and most of the information on their composition and production could be found in patent search. The aim of this review is to provide an overview of gum composition, manufacturing process, and characterization. Due to the scarcity of studies concerning the evaluation of the mechanical properties of MCGs, greater emphasis was placed on the available performance tests and procedures for the estimation of their mechanical and textural properties. While very few tests have been recommended by the official pharmacopeias, several tests have been suggested for assessing the mechanical properties of MCGs in vitro. Properties, such as chewiness, elasticity, and firmness, of chewing gums during mastication are imperative quality attributes that have been found to strongly correlate with gum composition and mouth feel.