Incidental Findings Following Dental Implant Procedures in the Mandible: A New Post-Processing CBCT Software Analysis.

Background/Objectives: The aim of this study was to evaluate incidental findings in the mandible after the placement of dental implants using a new cone-beam computed tomography (CBCT) software. Methods: The initial sample consisted of 2872 CBCT scans of patients of both sexes. The parameters evaluated in this study were the location of the implants in the mandible, implant length, anatomical relationship of the implant with the mandibular canal, presence or absence of damage to the adjacent teeth, presence or absence of implant fractures, and presence or absence of bone support. Fisher's exact test was performed to compare the variables. The significance level was set at p = 0.05. Results: Out of 2872 CBCT scans, 214 images of patients with an average age of 44.5 years were included. The most frequent location of the implants was the posterior region (93.5%), with 54% of the implants having a length between 9 and 14 mm. It was found that 92% of the implants were positioned above the mandibular canal. Damage to adjacent teeth was observed, with no correlation with the implant positioning (p = 1.000). In 100% of cases of implants in the anterior region, there was bone support. Fracture was observed in 1.7% of implants with a length between 9 and 14 mm. Conclusions: The installation of implants in the mandible occurs more frequently in the posterior region, with a high presence of bone support and a low incidence of damage to adjacent teeth, anatomical structures, and fractures.

Comparative effectiveness of preemptive administration of ibuprofen and ibuprofen-arginine on the anesthetic success of inferior alveolar nerve block in teeth with symptomatic irreversible pulpitis - A double-blind randomized clinical trial.

OBJECTIVES: This study examined the impact of premedication with ibuprofen and ibuprofen-arginine and the influence of preoperative pain and anxiety on inferior alveolar nerve block (IANB) efficacy in cases of symptomatic irreversible pulpitis. MATERIALS AND METHODS: The study involved 150 SIP patients who were randomly assigned to receive ibuprofen (600 mg), ibuprofen-arginine (1,155 mg), or a placebo 30 min before IANB. Preoperative anxiety and pain levels were assessed using the Modified Dental Anxiety Scale and the Heft-Parker visual scale. IANB efficacy was determined by the absence of or mild pain during the procedure. Statistical analysis included chi-square, z-tests, Analysis of Variance, and Student's t tests. RESULTS: The ibuprofen and ibuprofen-arginine groups exhibited significantly higher IANB success rates (62% and 78%, respectively) compared to the placebo group (34%). However, no significant difference was observed between the ibuprofen and ibuprofen-arginine groups. Patients with successful IANB in the ibuprofen and ibuprofen-arginine groups displayed lower median anxiety scores (8) than those with failed blocks (15) and lower mean preoperative pain scores (118.3). CONCLUSION: In cases of symptomatic irreversible pulpitis the preemptive medication with ibuprofen-arginine effectively increased the efficacy of the inferior alveolar nerve block The inferior alveolar nerve block efficacy was influenced by preoperative anxiety levels and the intensity of pain. CLINICAL RELEVANCE: This research underscores the potential benefits of oral premedication with ibuprofen and ibuprofen-arginine in improving anesthesia outcomes in cases of symptomatic irreversible pulpitis.

Does irradiation of the tooth structure interfere with oxygen saturation measured by pulse oximetry?-An ex vivo laboratorial study.

The effect of tooth structure subjected to ionising radiation on oxygen saturation levels (SpO2 ) measured by pulse oximetry was investigated. Fifty-four extracted human third molars were sectioned mesiodistally. Pulse oximeter diodes were placed in prefabricated silicone moulds, secured on a vise with tooth surfaces placed between the diodes and the participant's finger, and SpO2 levels were measured. After that, the tooth surfaces were subjected to ionising radiation in fractionated doses of up to 70 Gy, and SpO2 was measured according to the protocol described. The Kolmogorov-Smirnov test was used for the analysis of normality of the quantitative variables, and Student's t-test compared mean SpO2 levels before and after irradiation. Mean SpO2 after irradiation was 94.6 ± 0.9%, without a statistically significant difference from SpO2 before irradiation, which was 94.7 ± 0.6%. Irradiation of the tooth structure did not interfere with SpO2 levels measured by pulse oximetry.

Effect of low-power diode laser on infected root canals

Abstract This study evaluated the effect of photodynamic therapy (PDT) on infected root canals. Twenty-one human teeth were selected, and 18 were infected by E. faecalis for 60 days. The antimicrobial strategies tested were: G1. Root canal preparation (RCP) using Niquel-Titanium (NiTi) rotary instruments, 2.5% NaOCl, and final irrigation with 17% EDTA, followed by PDT with methylene blue photosensitizer and laser diode low power; G2. RCP using stainless steel files and the same irrigation and PDT protocols as G1; G3. Same RCP protocol as G1 without PDT; G4. Only irrigation with 2.5% NaOCl; G5. Same PDT protocol as G1 without RCP; G6. Negative control; G7. Positive control. Samples for microbiological tests were collected initially (S1), after RCP (S2), and after PDT (S3). Subsequently, the roots were sectioned and prepared for Scanning Electron Microscopy (SEM) analysis. Bacterial growth was analyzed according to the turbidity of the culture medium, followed by spectrophotometric optical density (nm). The effect of PDT on the dentinal structure was evaluated at magnifications 1,600X and 5,000X and described qualitatively. The Wilcoxon test was used for the comparisons from the same specimens, and the Mann-Whitney test was used to compare groups ((=5%). Bacteria were found in all experimental groups' microbiological samples (S1, S2 and S3). The optical density of culture media was lower in S2 than in S1 of G1, 2, 3, and 4 (p> 0.05). After PDT (S3) in G1 and 2, there was an additional reduction in optical density of the culture medium, respectively (p>0.05). In Group 5, the analysis of culture media at S2 revealed an increase in optical density compared to S1(p>0.05). In SEM images of G1, 2, and 5, dentin with melting and recrystallization areas were evidenced. After preparation of the root canal with the rotary system or manually associated with 2.5% NaOCl, PDT was not able to completely eliminate E. faecalis present in the root canal.

Resumo Este estudo avaliou o efeito da terapia fotodinâmica (PDT) em canais radiculares infectados com E. faecalis. Vinte e um dentes humanos extraídos foram selecionados, e 18 foram infectados por E. faecalis por 60 dias. As estratégias antimicrobianas testadas foram: G1. Preparo do canal radicular (PCR) com instrumentos rotatórios de NiTi, NaOCl 2,5% e irrigação final com EDTA 17%, seguido de PDT com fotossensibilizador azul de metileno e laser diodo de baixa potência; G2. PCR usando limas de aço inoxidável e os mesmos protocolos de irrigação e PDT do G1; G3. Protocolo de PCR similar que G1 sem PDT; G4. Somente irrigação com NaOCl 2,5%; G5. Protocolo similar ao G1, sem PCR; G6. Controle negativo; G7. Controle positivo. Amostras para exames microbiológicos foram coletadas inicialmente (S1), após PCR (S2) e após PDT (S3). Na sequência, as raízes foram seccionadas e preparadas para análise em microscopia eletrônica de varredura (MEV). O crescimento bacteriano foi analisado de acordo com a turbidez do meio de cultura seguida pela densidade óptica espectrofotométrica (nm). O efeito da PDT na estrutura dentinária foi avaliado em aumentos de 1.600X e 5.000X, e descrito qualitativamente. O teste de Wilcoxon foi utilizado para as comparações dos mesmos espécimes e o teste de Mann-Whitney para as comparações entre os grupos ((=5%). Bactérias foram encontradas em todos os grupos experimentais, e em todas as coletas microbiológicas (S1, S2 e S3). A densidade óptica dos meios de cultura foi menor em S2 do que em S1 de G1, 2, 3 e 4 (p>0,05). Após a PDT (S3) em G1 e 2, houve redução adicional na densidade óptica do meio de cultura de 90,0% e 92,0%, respectivamente (p>0,05). No Grupo 5, a análise dos meios de cultura em S2 revelou um aumento de 3,2% na densidade óptica em comparação com S1(p>0,05). Nas imagens de MEV do G1, 2 e 5 foram evidenciadas dentina com áreas de fusão e recristalização. O PDT utilizado após preparo do canal radicular com sistema rotatório ou manual, associado ao NaOCl 2,5%, não foi capaz de eliminar completamente o E. faecalis em biofilme maduro presente no canal radicular.

Effect of low-power diode laser on infected root canals.

This study evaluated the effect of photodynamic therapy (PDT) on infected root canals. Twenty-one human teeth were selected, and 18 were infected by E. faecalis for 60 days. The antimicrobial strategies tested were: G1. Root canal preparation (RCP) using Niquel-Titanium (NiTi) rotary instruments, 2.5% NaOCl, and final irrigation with 17% EDTA, followed by PDT with methylene blue photosensitizer and laser diode low power; G2. RCP using stainless steel files and the same irrigation and PDT protocols as G1; G3. Same RCP protocol as G1 without PDT; G4. Only irrigation with 2.5% NaOCl; G5. Same PDT protocol as G1 without RCP; G6. Negative control; G7. Positive control. Samples for microbiological tests were collected initially (S1), after RCP (S2), and after PDT (S3). Subsequently, the roots were sectioned and prepared for Scanning Electron Microscopy (SEM) analysis. Bacterial growth was analyzed according to the turbidity of the culture medium, followed by spectrophotometric optical density (nm). The effect of PDT on the dentinal structure was evaluated at magnifications 1,600X and 5,000X and described qualitatively. The Wilcoxon test was used for the comparisons from the same specimens, and the Mann-Whitney test was used to compare groups ((=5%). Bacteria were found in all experimental groups' microbiological samples (S1, S2 and S3). The optical density of culture media was lower in S2 than in S1 of G1, 2, 3, and 4 (p> 0.05). After PDT (S3) in G1 and 2, there was an additional reduction in optical density of the culture medium, respectively (p>0.05). In Group 5, the analysis of culture media at S2 revealed an increase in optical density compared to S1(p>0.05). In SEM images of G1, 2, and 5, dentin with melting and recrystallization areas were evidenced. After preparation of the root canal with the rotary system or manually associated with 2.5% NaOCl, PDT was not able to completely eliminate E. faecalis present in the root canal.

Evaluation in the danger zone of mandibular molars after root canal preparation using novel CBCT software.

This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Evaluation in the danger zone of mandibular molars after root canal preparation using novel CBCT software

Abstract: This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Comparative analysis of bond strength to root dentin and compression of bioceramic cements used in regenerative endodontic procedures.

OBJECTIVES: This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. MATERIALS AND METHODS: Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. RESULTS: Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). CONCLUSIONS: Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive.

Cone Beam Computed Tomography Assessment of the Volume of Dental Tissue Removed During Endodontic Access.

Introduction: The purpose of this study was to determine the volume of dental tissue removed during endodontic access preparation with cone-beam computed tomography (CBCT) comparing two different software. Methods and Materials: CBCT images of 20 teeth were obtained before and after endodontic access performed with spherical and conical diamond burs. The images were taken with i-CAT Precise system with 0.25 mm voxel size. Digital Imaging and Communications in Medicine (DICOM) images were loaded on two different software programs (Materialise® and InVersalius®), and a 3D reconstruction of the CBCT images was performed on both programs. The baseline volume (BV), and the final volume (FV) were obtained, and the lost tissue volume (LV) was calculated using the formula: LV=BV-FV. The t-test was used to compare initial and final volumes and also to compare the two programs, using a significance level of 5%. Results: The volumetric data calculated for the Materialise  and the InVesalius  programs were, respectively: BV-mean of 441.79±85.08 mm3 and 442.01±84.83 mm3; FV-mean of 426.75±83.88 mm3 and 426.94±83.75 mm3; LV-mean of 15.04±4.32 mm3 and 15.07±4.16 mm3. No statistically significant difference was found in the volumes calculated by either program for initial, final, or removed tissue (P>0.05). However, there was a significant difference between the BV and LV calculated on the same program (P<0.05). Conclusion: Our in vitro study showed that CBCT was able to determine the volume of dental tissue removed in the endodontic access preparation of extracted human teeth, regardless of the software program used.

Interference of coronal enamel and dentin thickness and ambient light on pulse oximetry interpretation.

This study evaluated the interference of enamel and coronal dentin thickness and ambient light in pulse oximetry interpretation, using SaO2the human finger as a reference. Forty-two intact human permanent mandibular molars were sectioned mesiodistally in the central portion. Buccal and lingual dentin surfaces were drilled, and 4 mm, 3 mm and 2 mm enamel/dentin thicknesses were interposed between finger and device, after which SaO2 levels were measured by finger pulse oximetry. A reference device was designed to align pulse oximeter light-emitting diode, buccal surface of tooth, little finger, lingual surface of tooth and photodiode. Variables were described as means and standard deviation, and the confidence interval was reported. Repeated measures analysis of variance (ANOVA) was used to compare the groups, followed by Bonferroni correction. Student t test for paired samples was used to determine presence of ambient light (α = 0.05). Mean SaO2 level was lower at 4.0 ± 0.2 mm thickness, regardless of presence or absence of ambient light (92.7% and 89.3%). The other thicknesses yielded values of 95.5% and 94.5% at 3.0 ± 0.2 mm, and 96.4% and 96.0% at 2.0 ± 0.2 mm (p < 0.001). There were significant differences between SaO2 values at 4.0 ± 0.2 mm, 3.0 ± 0.2 mm and 2.0 ± 0.2 mm thicknesses, in the presence of ambient light. Mean SaO2 level in positive control was 96.3%, and mean pulse rate was 69.5 bpm in presence of ambient light; in the absence of light, these values were 96% and 70.5 bpm. Enamel and dentin thickness interfere with SaO2, regardless of presence or absence of ambient light. The lowest SaO2 levels were found for the thickest tooth samples.

CBCT assessment of bone thickness in maxillary and mandibular teeth: an anatomic study.

OBJECTIVE: The site of the sinus tract depends on the rate of resistance against abscess exudate drainage, bone morphology, and distance from the root apex to the outer cortical bone. To assess apical bone thickness in buccal and palatal/lingual aspects of maxillary and mandibular teeth, using a high-resolution cone-beam computed tomography (CBCT) system. METHODOLOGY: In total, 422 CBCT examinations were included in the study, resulting in a sample of 1400 teeth. The scans were acquired by PreXion 3D, with a high-resolution protocol. The bone thickness was taken as the distance between the center of the apical foramen and the buccal and lingual/palatal cortical bone. The quantitative variables were expressed as mean values±standard deviation. The independent samples were analyzed using the t-test or the Mann-Whitney test (p<0.05). RESULTS: The lowest mean value of bone thickness was observed in the buccal cortical bone of the upper canines (1.49 mm±0.86) and in the upper central incisors (1.59 mm±0.67). In premolar teeth, the lowest values were found in the buccal cortical bone of upper first premolars (1.13 mm±0.68). In the posterior teeth, the lowest values were found in the buccal cortical bone of upper first molars (1.98 mm±1.33). In the lower second molar region, the buccal cortical bone (8.36 mm±1.84) was thicker than the lingual cortical bone (2.95 mm±1.16) (p<0.05). CONCLUSIONS: The lowest mean values of bone thickness are in the buccal cortical bone of the maxillary teeth. In the mandible, bone thickness is thinner in the buccal bone around the anterior and premolar teeth, and in the lingual aspect of mandibular molars. All these anatomic characteristics could make the occurrence of the sinus tract more susceptible in these specific regions of the maxillary and mandibular alveolar bone.

Interference of coronal enamel and dentin thickness and ambient light on pulse oximetry interpretation

Abstract This study evaluated the interference of enamel and coronal dentin thickness and ambient light in pulse oximetry interpretation, using SaO2the human finger as a reference. Forty-two intact human permanent mandibular molars were sectioned mesiodistally in the central portion. Buccal and lingual dentin surfaces were drilled, and 4 mm, 3 mm and 2 mm enamel/dentin thicknesses were interposed between finger and device, after which SaO2 levels were measured by finger pulse oximetry. A reference device was designed to align pulse oximeter light-emitting diode, buccal surface of tooth, little finger, lingual surface of tooth and photodiode. Variables were described as means and standard deviation, and the confidence interval was reported. Repeated measures analysis of variance (ANOVA) was used to compare the groups, followed by Bonferroni correction. Student t test for paired samples was used to determine presence of ambient light (α = 0.05). Mean SaO2 level was lower at 4.0 ± 0.2 mm thickness, regardless of presence or absence of ambient light (92.7% and 89.3%). The other thicknesses yielded values of 95.5% and 94.5% at 3.0 ± 0.2 mm, and 96.4% and 96.0% at 2.0 ± 0.2 mm (p < 0.001). There were significant differences between SaO2 values at 4.0 ± 0.2 mm, 3.0 ± 0.2 mm and 2.0 ± 0.2 mm thicknesses, in the presence of ambient light. Mean SaO2 level in positive control was 96.3%, and mean pulse rate was 69.5 bpm in presence of ambient light; in the absence of light, these values were 96% and 70.5 bpm. Enamel and dentin thickness interfere with SaO2, regardless of presence or absence of ambient light. The lowest SaO2 levels were found for the thickest tooth samples.

CBCT assessment of bone thickness in maxillary and mandibular teeth: an anatomic study

Abstract The site of the sinus tract depends on the rate of resistance against abscess exudate drainage, bone morphology, and distance from the root apex to the outer cortical bone. Objective To assess apical bone thickness in buccal and palatal/lingual aspects of maxillary and mandibular teeth, using a high-resolution cone-beam computed tomography (CBCT) system. Methodology In total, 422 CBCT examinations were included in the study, resulting in a sample of 1400 teeth. The scans were acquired by PreXion 3D, with a high-resolution protocol. The bone thickness was taken as the distance between the center of the apical foramen and the buccal and lingual/palatal cortical bone. The quantitative variables were expressed as mean values±standard deviation. The independent samples were analyzed using the t-test or the Mann-Whitney test (p<0.05). Results The lowest mean value of bone thickness was observed in the buccal cortical bone of the upper canines (1.49 mm±0.86) and in the upper central incisors (1.59 mm±0.67). In premolar teeth, the lowest values were found in the buccal cortical bone of upper first premolars (1.13 mm±0.68). In the posterior teeth, the lowest values were found in the buccal cortical bone of upper first molars (1.98 mm±1.33). In the lower second molar region, the buccal cortical bone (8.36 mm±1.84) was thicker than the lingual cortical bone (2.95 mm±1.16) (p<0.05). Conclusions The lowest mean values of bone thickness are in the buccal cortical bone of the maxillary teeth. In the mandible, bone thickness is thinner in the buccal bone around the anterior and premolar teeth, and in the lingual aspect of mandibular molars. All these anatomic characteristics could make the occurrence of the sinus tract more susceptible in these specific regions of the maxillary and mandibular alveolar bone.

Effect of dental bleaching on pulp oxygen saturation in maxillary central incisors - a randomized clinical trial

Abstract Objective To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching. Materials and Methods 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - In-office bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days. Mean (SD) pulp SaO2 levels were compared within groups by generalized estimating equations (GEE) and Student's t-test (P<0.05). Results Mean pulp SaO2 at T0 was 84.29% in G1, 84.38% in G2, 84.79% in G3, and 85.83% in G4. At T1, these values decreased to 81.96%, 82.06%, 82.19%, and 81.15% in G1, G2, G3, and G4 respectively, with significant difference in G4 (P<0.05). During home bleaching, pulp SaO2 levels varied in all groups, with 86.55%, 86.60%, 85.71%, and 87.15% means at T7 for G1, G2, G3, and G4, respectively; G2 presented significant difference (P<0.05). Conclusions Pulp SaO2 level in maxillary central incisors was similar at baseline, reducing immediately after in-office bleaching, regardless of using desensitizing toothpaste and increasing at 30 days after dental bleaching.

Oximetria de pulso na avaliação da vitalidade pulpar: análise crítica / Pulse oximetry in evaluation of pulp vitality: critical analysis

O diagnóstico da condição pulpar é essencial para o estabelecimento do tratamento adequado, e continua sendo um desafio na prática clínica atual. Os testes pulpares térmicos e elétrico são os mais comumente utilizados, porém apresentam as limitações inerentes por avaliarem apenas a sensibilidade pulpar, através da aplicação de estímulos na superfície dentária. A vitalidade da polpa dentária está relacionada à sua vascularização, e testes que avaliam o fluxo sanguíneo pulpar têm sido desenvolvidos e estudados. A oximetria de pulso é amplamente utilizada na medicina para determinação dos níveis de saturação de oxigênio sanguíneos, e tem apresentado-se como recurso para determinação da vitalidade pulpar. Com a utilização de adaptadores, os níveis de saturação de oxigênio da polpa dentária têm sido determinados em diferentes condições clínicas, direcionando para um diagnóstico mais preciso. Resultados promissores obtidos em diversos estudos reforçam as vantagens do oxímetro de pulso em comparação aos testes de sensibilidade, por se tratar de um método mais acurado, objetivo, não invasivo e que não provoca dor e desconforto ao paciente. Nesta perspectiva, os avanços científicos e tecnológicos têm aprimorado o uso de métodos de diagnóstico pulpar inovadores, e o oxímetro de pulso é um potencial recurso para aplicação na rotina clínica dos cirurgiões-dentistas.

Dental pulp diagnosis is essential for the establishment of appropriate treatment and remains a challenge in current clinical practice. Thermal and electrical pulp tests are the most commonly used, but they have the inherent limitations of only evaluating the pulp sensitivity through the application of stimuli on the dental surface. The vitality of the dental pulp is related to its vascularization, and tests that evaluate pulp blood flow have been developed and studied. Pulse oximetry is widely used in medicine for determination of blood oxygen saturation levels and has been presented as a resource for pulp vitality determination. With use of adapters, the levels of oxygen saturation of the dental pulp have been determined in different clinical conditions, leading to a more accurate diagnosis. Promising results obtained in several studies reinforce the advantages of the pulse oximeter in comparison to the sensitivity tests, because it is a more accurate, objective, non-invasive method that does not cause pain and discomfort to the patient. In this perspective, scientific and technological advances have improved the use of innovative pulp diagnostic methods, and the pulse Oximeter is a potential resource for application in the clinical routine of dentists.

Evaluation of crown inclination and angulation after orthodontic treatment using digital models : Comparison to the prescription of the brackets used.

PURPOSE: To compare crown inclination and angulation results obtained after orthodontic treatment to the Roth prescription. METHODS: The study design was based on files and documents obtained from a database of 26 patients who had undergone orthodontic treatment using the straight-wire technique and the Roth prescription. The crown inclination and angulation were measured using a three-dimensional (3D) cephalometric module (VistaDent, Dentsply, New York, NY, USA) by an orthodontist. A coordinate system (x, y, z) was developed for each tooth that used the Andrews plane as a para-axial reference. Descriptive statistical analysis provided the mean and standard deviation (SD) of crown inclination and angulation obtained after orthodontic treatment, which were compared to the Roth prescription. RESULTS: Method reproducibility is an important test to investigate the margin of error and to verify the reliability of results. The results at time 1 (1.6°â€¯± 1.1°) and time 2 (1.7°â€¯± 1.2°) of the pilot study were not statistically different (p = 0.99). Maxillary lateral and central incisors presented significant differences in crown angulation (p < 0.05) compared to the Roth prescription. The crown angulation of maxillary second premolars with regard to the occlusal plane presented a similar value to the Roth prescription. CONCLUSION: Crown inclination and angulation found at the end of orthodontic treatment did not match the prescription of the brackets for most teeth, as measured using digital models.

Multidimensional Analysis of Curved Root Canal Preparation Using Continuous or Reciprocating Nickel-titanium Instruments.

Objective: To evaluate transportation (T) and centering ability (CA) of root canal preparations using continuous or reciprocating nickel-titanium endodontic files. Materials and Methods: Ninety-six mesiobuccal root canals of mandibular first and second molars were randomly divided into 6 groups (n=16) according to the rotary file used: 1. ProTaper Next; 2. ProTaper Gold; 3. Mtwo; 4. BioRaCe; 5. WaveOne Gold; 6. Reciproc. Root canals were prepared according to manufacturer's instructions. Cone beam computed tomography scans were obtained before and after root canal preparation. Measurements were made at six different reference points: 2, 3 and 4 mm from the apex and 2, 3 and 4 mm below furcation in different directions. Results: The greatest Mesiodistal (MD) Transportation (T) was found for Reciproc files (p<0.05), and the greatest buccolingual (BL) T, for Reciproc, ProTaper Gold and ProTaper Next files (p<0.05). The greatest Mesiodistal (MD) Centering Ability (CA) was found for BioRaCe files (p<0.05), and the greatest Buccolingual (BL) CA, for BioRaCe and Mtwo files (p<0.05). Conclusion: All systems produced root canal transportation. No file system achieved perfect CA of root preparation. Reciproc files had the greatest MD T and BL T. BioRaCe files had the greatest MD CA, whereas BL CA was similar for BioRaCe and Mtwo files.

Correlation of Crown Angulation and Inclination Based on Occlusal, Camper's, and Frankfurt Planes Using Digital Models.

This study provided the measures of crown angulations and inclinations which were evaluated using 3D cephalometry. This study was conducted to demonstrate the relationship between the main planes : Camper's, Frankfurt, and occlusalplanes for guiding the positioning ofthe skull and orthodontic planning.

Working Length Determination Using Cone-Beam Computed Tomography, Periapical Radiography and Electronic Apex Locator in Teeth with Apical Periodontitis: A Clinical Study.

INTRODUCTION: The purpose of this clinical study was to compare the accuracy of working length (WL) determination using cone-beam computed tomography (CBCT), conventional periapical radiographies and electronic apex locator. METHODS AND MATERIALS: This study was conducted during root canal treatment of 19 patients with a total of 30 single-rooted teeth diagnosed with apical periodontitis. After taking the initial parallel periapical radiographies, the initial file was advanced into the canal until the WL was detected by the apex locator. Subsequently, the WL was measured and WL radiographies were taken with the file set in the canal. Afterwards, CBCT images were acquired. These three measurements were tabulated and compared and the data were analyzed using the Friedman test. The level of significance was set at 0.05. RESULTS: The mean values for WL determination by electronic apex locator, periapical radiograph and CBCT images were 22.25, 22.43 and 22.65, respectively which was not statistically significant (P>0.05). CONCLUSION: Working length determination using CBCT images was precise when compared to radiographic method and electronic apex locator.

Effect of Instrumentation Techniques, Irrigant Solutions and Artificial accelerated Aging on Fiberglass Post Bond Strength to Intraradicular Dentin.

OBJECTIVE: To evaluate the effect of instrumentation techniques, irrigant solutions and specimen aging on fiberglass posts bond strength to intraradicular dentine. MATERIALS AND METHODS: A total of 120 bovine teeth were prepared and randomized into control and experimental groups resulting from three study factors (instrumentation techniques, irrigant solutions, specimen aging). Posts were cemented with RelyX U100. Samples were submitted to push-out test and failure mode was evaluated under a confocal microscope. RESULTS: In specimens submitted to water artificial aging, nickel-titanium rotary instruments group presented higher bond strength values in apical third irrigated with NaOCl or chlorhexi-dine. Irrigation with NaOCl resulted in higher bond strength than ozonated water. Artificial aging resulted in significant bond strength increase. Adhesive cement-dentin failure was prevalent in all the groups. CONCLUSION: Root canal preparation with NiTi instruments associated with NaOCl irrigation and ethylenediaminetetra acetic acid (EDTA) increased bond strength of fiberglass posts cemented with self-adhesive resin cement to intraradicular dentine. Water artificial aging significantly increased post-Clinical significance: The understanding of factors that may influence the optimal bond between post-cement and cement-dentin are essential to the success of endodontically treated tooth restoration.