Bottom-Up Synthesis of Platinum Dual-Atom Catalysts on Cerium Oxide.

We present here the synthesis and performance of dual-atom catalysts (DACs), analogous to well-known single-atom catalysts (SACs). DACs feature sites containing pairs of metal atoms and can outperform SACs due to their additional binding possibilities. Yet quantifying the improved catalytic activity in terms of proximity effects remains difficult, as it requires both high-resolution kinetic data and an understanding of the reaction pathways. Here, we use an automated bubble counter setup for comparing the catalytic performance of ceria-supported platinum SACs and DACs in ammonia borane hydrolysis. The catalysts were synthesized by wet impregnation and characterized using SEM, HAADF-STEM, XRD, XPS, and CO-DRIFTS. High-precision kinetic studies of ammonia borane hydrolysis in the presence of SACs show two temperature-dependent regions, with a transition point at 43 °C. Conversely, the DACs show only one regime. We show that this is because DACs preorganize both ammonia borane and water at the dual-atom active site. The additional proximal Pt atom improves the reaction rate 3-fold and enables faster reactions at lower temperatures. We suggest that the DACs enable the activation of the water-O-H bond as well as increase the hydrogen spillover effect due to the adjacent Pt site. Interestingly, using ammonia borane hydrolysis as a benchmark reaction gives further insight into hydrogen spillover mechanisms, above what is known from the CO oxidation studies.

Neurosurgery Clerkships in United States Medical Schools: A Survey of Doctor of Medicine-Granting and Doctor of Osteopathic Medicine-Granting Schools.

OBJECTIVE: Exposure to neurosurgery is important for knowledge of neurosurgical conditions that physicians may encounter. The current status of neurosurgery nonsubinternship clerkships in the United States is unknown; this study determined the availability and format of non-subinternship neurosurgery clerkships in DO (Doctor of Osteopathic Medicine)-granting and MD (Doctor of Medicine)-granting U.S. medical schools. METHODS: Association of American Medical Colleges and American Association of Colleges of Osteopathic Medicine websites were used to obtain contact information for all U.S. medical schools. Respondents were asked whether their school offered a non-subinternship neurosurgery clerkship, if it was required, clerkship length, and whether the clerkship was embedded in another clerkship. Nonsubinternship clerkships/electives/selectives were defined as an exploratory neurosurgery rotation. For nonresponding schools, data were collected from school websites. RESULTS: Data were obtained for 180/199 U.S. medical schools; 142 (79%) provided neurosurgery non-subinternships, including 125/150 (83.3%) MD-granting and 17/30 (57%) DO-granting schools. Four MD-granting schools (2.8%) required the clerkship; 87/142 (61%) offered a stand-alone clerkship, 34/142 (24%) an embedded clerkship, and 21/142 (15%) offered both. In total, 200 clerkships were offered across 142 schools. Most were either >1-2 weeks or >3-4 weeks (69/200, 35% and 89/200, 45%, respectively). CONCLUSIONS: Most U.S. medical schools provide elective neurosurgery non-subinternships. Fewer, although still a majority, of DO-granting schools offer a neurosurgery non-subinternship compared with MD-granting schools.

Achieving Robust Compressive Sensing Seismic Acquisition with a Two-Step Sampling Approach.

The compressive sensing (CS) framework offers a cost-effective alternative to dense alias-free sampling. Designing seismic layouts based on the CS technique imposes the use of specific sampling patterns in addition to the logistical and geophysical requirements. We propose a two-step design process for generating CS-based schemes suitable for seismic applications. During the first step, uniform random sampling is used to generate a random scheme, which is supported theoretically by the restricted isometry property. Following that, designated samples are added to the random scheme to control the maximum distance between adjacent sources (or receivers). The null space property theoretically justifies the additional samples of the second step. Our sampling method generates sampling patterns with a CS theoretical background, controlled distance between adjacent samples, and a flexible number of active and omitted samples. The robustness of two-step sampling schemes for reallocated samples is investigated and CS reconstruction tests are performed. In addition, using this approach, a CS-based 3D seismic survey is designed, and the distributions of traces in fold maps and rose diagrams are analyzed. It is shown that the two-step scheme is suitable for CS-based seismic surveys and field applications.

Serial RV wall stress measurements: association with right ventricular function in repaired Tetralogy of Fallot patients.

Background: Optimal timing of pulmonary valve replacement (PVR) in Tetralogy of Fallot (TOF) patients remains challenging. Ventricular wall stress is considered to be an early marker of right ventricular (RV) dysfunction. Objectives: To investigate the association of RV wall stresses and their change over time with functional parameters in TOF patients. Methods: Ten TOF patients after surgical repair with moderate/severe pulmonary regurgitation were included. At two timepoints (median follow-up time 7.2 years), patient-specific computational biventricular models for wall stress assessment were created using CMR short-axis cine images and echocardiography-based RV pressures. RV ejection fraction (RVEF), NT-proBNP and cardiopulmonary exercise tests were used as outcome measures reflecting RV function. Associations between regional RV diastolic wall stress and RV function were investigated using linear mixed models. Results: Increased wall stress correlated with lower RV mass (rrm = -0.70, p = 0.017) and lower RV mass-to-volume (rrm = -0.80, p = 0.003) using repeated measures. Wall stress decreased significantly over time, especially in patients with a stable RVEF (p < 0.001). Higher wall stress was independently associated with lower RVEF, adjusted for left ventricular ejection fraction, RV end-diastolic volume and time since initial surgery (decrease of 1.27% RVEF per kPa increase in wall stress, p = 0.029) using repeated measurements. No association was found between wall stress, NT-proBNP, and exercise capacity. Conclusions: Using a computational method to calculate wall stress locally in geometrically complex ventricles, we demonstrated that lower wall stress might be important to maintain ventricular function. RV wall stress assessment can be used in serial follow-up, and is potentially an early marker of impending RV dysfunction.

Mechanical wall stress and wall shear stress are associated with atherosclerosis development in non-calcified coronary segments.

BACKGROUND AND AIMS: Atherosclerotic plaque onset and progression are known to be affected by local biomechanical factors. While the role of wall shear stress (WSS) has been studied, the impact of another biomechanical factor, namely mechanical wall stress (MWS), remains poorly understood. In this study, we investigated the association of MWS, independently and combined with WSS, towards atherosclerosis in coronary arteries. METHODS: Thirty-four human coronary arteries were analyzed using near-infrared spectroscopy intravascular ultrasound (NIRS-IVUS) and optical coherence tomography (OCT) at baseline and after 12 months. Baseline WSS and MWS were calculated using computational models, and wall thickness (ΔWT) and lipid-rich necrotic core size (ΔLRNC) change were measured in non-calcified coronary segments. The arteries were further divided into 1.5 mm/45° sectors and categorized as plaque-free or plaque sectors. For each category, associations between biomechanical factors (WSS & MWS) and changes in coronary wall (ΔWT & ΔLRNC) were studied using linear mixed models. RESULTS: In plaque-free sectors, higher MWS (p < 0.001) was associated with greater vessel wall growth. Plaque sectors demonstrated wall thickness reduction over time, likely due to medical therapy, where higher levels of WSS and WMS, individually and combined, (p < 0.05) were associated with a greater reduction. Sectors with low MWS combined with high WSS demonstrated the highest LRNC increase (p < 0.01). CONCLUSIONS: In this study, we investigated the association of the (largely-overlooked) biomechanical factor MWS with coronary atherosclerosis, individually and combined with WSS. Our results demonstrated that both MWS and WSS significantly correlate with atherosclerotic plaque initiation and development.

A tissue-engineered model of the atherosclerotic plaque cap: Toward understanding the role of microcalcifications in plaque rupture.

Rupture of the cap of an atherosclerotic plaque can lead to thrombotic cardiovascular events. It has been suggested, through computational models, that the presence of microcalcifications in the atherosclerotic cap can increase the risk of cap rupture. However, the experimental confirmation of this hypothesis is still lacking. In this study, we have developed a novel tissue-engineered model to mimic the atherosclerotic fibrous cap with microcalcifications and assess the impact of microcalcifications on cap mechanics. First, human carotid plaque caps were analyzed to determine the distribution, size, and density of microcalcifications in real cap tissue. Hydroxyapatite particles with features similar to real cap microcalcifications were used as microcalcification mimics. Injected clusters of hydroxyapatite particles were embedded in a fibrin gel seeded with human myofibroblasts which deposited a native-like collagenous matrix around the particles, during the 21-day culture period. Second harmonic multiphoton microscopy imaging revealed higher local collagen fiber dispersion in regions of hydroxyapatite clusters. Tissue-engineered caps with hydroxyapatite particles demonstrated lower stiffness and ultimate tensile stress than the control group samples under uniaxial tensile loading, suggesting increased rupture risk in atherosclerotic plaques with microcalcifications. This model supports previous computational findings regarding a detrimental role for microcalcifications in cap rupture risk and can further be deployed to elucidate tissue mechanics in pathologies with calcifying soft tissues.

Detection of electromagnetic phase transitions using a helical cavity susceptometer.

Fast and sensitive phase transition detection is one of the most important requirements for new material synthesis and characterization. For solid-state samples, microwave absorption techniques can be employed for detecting phase transitions because it simultaneously monitors changes in electronic and magnetic properties. However, microwave absorption techniques require expensive high-frequency microwave equipment and bulky hollow cavities. Due to size limitations in conventional instruments, it is challenging to implement these cavities inside a laboratory cryostat. In this work, we designed and built a susceptometer that consists of a small helical cavity embedded into a custom insert of a commercial cryostat. This cavity resonator operated at sub-GHz frequencies is extremely sensitive to changes in material parameters, such as electrical conductivity, magnetization, and electric and magnetic susceptibilities. To demonstrate its operation, we detected superconducting phase transition in Nb and YBa2Cu3O7-δ, metal-insulator transitions in V2O3, ferromagnetic transition in Gd, and magnetic field induced transformation in meta magnetic NiCoMnIn single crystals. This high sensitivity apparatus allows the detection of trace amounts of materials (10-9-cc) undergoing an electromagnetic transition in a very broad temperature (2-400 K) and magnetic field (up to 90 kOe) ranges.

A rare ventriculoarterial connection: double outlet of both ventricles.

Ventriculoarterial connection is one of the important points of the segmental approach to congenital cardiac malformations. Double outlet of both ventricles is a rare form where both great arterial roots override the interventricular septum. In this article, we aimed to draw attention to this very rare form of ventriculoarterial connection by presenting an infant case diagnosed using echocardiography, CT angiography, and 3-dimensional modelling.

Tensile and Compressive Mechanical Behaviour of Human Blood Clot Analogues.

Endovascular thrombectomy procedures are significantly influenced by the mechanical response of thrombi to the multi-axial loading imposed during retrieval. Compression tests are commonly used to determine compressive ex vivo thrombus and clot analogue stiffness. However, there is a shortage of data in tension. This study compares the tensile and compressive response of clot analogues made from the blood of healthy human donors in a range of compositions. Citrated whole blood was collected from six healthy human donors. Contracted and non-contracted fibrin clots, whole blood clots and clots reconstructed with a range of red blood cell (RBC) volumetric concentrations (5-80%) were prepared under static conditions. Both uniaxial tension and unconfined compression tests were performed using custom-built setups. Approximately linear nominal stress-strain profiles were found under tension, while strong strain-stiffening profiles were observed under compression. Low- and high-strain stiffness values were acquired by applying a linear fit to the initial and final 10% of the nominal stress-strain curves. Tensile stiffness values were approximately 15 times higher than low-strain compressive stiffness and 40 times lower than high-strain compressive stiffness values. Tensile stiffness decreased with an increasing RBC volume in the blood mixture. In contrast, high-strain compressive stiffness values increased from 0 to 10%, followed by a decrease from 20 to 80% RBC volumes. Furthermore, inter-donor differences were observed with up to 50% variation in the stiffness of whole blood clot analogues prepared in the same manner between healthy human donors.

Local characterization of collagen architecture and mechanical failure properties of fibrous plaque tissue of atherosclerotic human carotid arteries.

Atherosclerotic plaque rupture in carotid arteries is a major cause of cerebrovascular events. Plaque rupture is the mechanical failure of the heterogeneous fibrous plaque tissue. Local characterization of the tissue's failure properties and the collagen architecture are of great importance to have insights in plaque rupture for clinical event prevention. Previous studies were limited to average rupture properties and global structural characterization, and did not provide the necessary local information. In this study, we assessed the local collagen architecture and failure properties of fibrous plaque tissue, by analyzing 30 tissue strips from 18 carotid plaques. Our study framework entailed second harmonic generation imaging for local collagen orientation and dispersion, and uniaxial tensile testing and digital image correlation for local tissue mechanics. The results showed that 87% of the imaged locations had collagen orientation close to the circumferential direction (0°) of the artery, and substantial dispersion locally. All regions combined, median [Q1:Q3] of the predominant angle measurements was -2° [-16°:16°]. The stretch ratio measurements clearly demonstrated a nonuniform stretch ratio distribution in the tissue under uniaxial loading. The rupture initiation regions had significantly higher stretch ratios (1.26 [1.15-1.40]) than the tissue average stretch ratio (1.11 [1.10-1.16]). No significant difference in collagen direction and dispersion was identified between the rupture regions and the rest of the tissue. The presented study forms an initial step towards gaining better insights into the characterization of local structural and mechanical fingerprints of fibrous plaque tissue in order to aid improved assessment of plaque rupture risk. STATEMENT OF SIGNIFICANCE: Plaque rupture risk assessment, critical to prevent cardiovascular events, requires knowledge on local failure properties and structure of collagenous plaque tissue. Our current knowledge is unfortunately limited to tissue's overall ultimate failure properties with scarce information on collagen architecture. In this study, local failure properties and collagen architecture of fibrous plaque tissue were obtained. We found predominant circumferential alignment of collagen fibers with substantial local dispersion. The tissue showed nonuniform stretch distribution under uniaxial tensile loading, with high stretches at rupture spots. This study highlights the significance of local mechanical and structural assessment for better insights into plaque rupture and the potential use of local stretches as risk marker for plaque rupture for patient-specific clinical applications.

Thermal Management in Neuromorphic Materials, Devices, and Networks.

Machine learning has experienced unprecedented growth in recent years, often referred to as an "artificial intelligence revolution." Biological systems inspire the fundamental approach for this new computing paradigm: using neural networks to classify large amounts of data into sorting categories. Current machine-learning schemes implement simulated neurons and synapses on standard computers based on a von Neumann architecture. This approach is inefficient in energy consumption, and thermal management, motivating the search for hardware-based systems that imitate the brain. Here, the present state of thermal management of neuromorphic computing technology and the challenges and opportunities of the energy-efficient implementation of neuromorphic devices are considered. The main features of brain-inspired computing and quantum materials for implementing neuromorphic devices are briefly described, the brain criticality and resistive switching-based neuromorphic devices are discussed, the energy and electrical considerations for spiking-based computation are presented, the fundamental features of the brain's thermal regulation are addressed, the physical mechanisms for thermal management and thermoelectric control of materials and neuromorphic devices are analyzed, and challenges and new avenues for implementing energy-efficient computing are described.

Retrograde urethrogram - a novel approach to diagnosing a posterior urethral polyp in a neonate.

We present a case of antenatally detected fetal megacystis caused by an obstructing posterior urethral polyp. Antenatal and postnatal ultrasounds showed bladder wall thickening and bilateral hydroureteronephrosis, most marked antenatally. A working diagnosis of posterior urethral valves was therefore made. However, further postnatal assessment with a micturating cystourethrogram (MCUG) combined with a retrograde urethrogram identified a pedunculated urethral polyp as the cause. The addition of a retrograde urethrogram as an adjunct to the MCUG in the diagnosis of posterior urethral polyp has not previously been reported, and in this case provided diagnostic confidence of this rare condition, allowing for definitive surgical planning.

Unusual Magnetic Hysteresis and Transition between Vortex and Double Pole States Arising from Interlayer Coupling in Diamond-Shaped Nanostructures.

Controlling the magnetic ground states at the nanoscale is a long-standing basic research problem and an important issue in magnetic storage technologies. Here, we designed a nanostructured material that exhibits very unusual hysteresis loops due to a transition between vortex and double pole states. Arrays of 700 nm diamond-shaped nanodots consisting of Py(30 nm)/Ru(tRu)/Py(30 nm) (Py, permalloy (Ni80Fe20)) trilayers were fabricated by interference lithography and e-beam evaporation. We show that varying the Ru interlayer spacer thickness (tRu) governs the interaction between the Py layers. We found this interaction mainly mediated by two mechanisms: magnetostatic interaction that favors antiparallel (antiferromagnetic, AFM) alignment of the Py layers and exchange interaction that oscillates between ferromagnetic (FM) and AFM couplings. For a certain range of Ru thicknesses, FM coupling dominates and forms magnetic vortices in the upper and lower Py layers. For Ru thicknesses at which AFM coupling dominates, the magnetic state in remanence is a double pole structure. Our results showed that the interlayer exchange coupling interaction remains finite even at 4 nm Ru thickness. The magnetic states in remanence, observed by magnetic force microscopy (MFM), are in good agreement with corresponding hysteresis loops obtained by the magneto-optic Kerr effect (MOKE) and micromagnetic simulations.

Radio-frequency induced heating of intra-cranial EEG electrodes: The more the colder?

Many neurological disorders are analyzed and treated with implantable electrodes. Many patients with such electrodes have to undergo MRI examinations - often unrelated to their implant - at the risk of radio-frequency induced heating. The number of electrode contact sites of these implants keeps increasing due to improvements in manufacturing and computational algorithms. Electrode grids with multiple receive channels couple to the RF fields present in MRI, but, due to their proximity, a combination of leads has a coupling response which is not a superposition of the individual leads' response. To investigate the problem of RF-induced heating of coupled multi-lead implants, temperature mapping was performed on a set of intra-cranial electroencephalogram (icEEG) electrode grid prototypes with increasing number of contact sites (1-16). Additionally, electric field measurements were used to investigate the radio-frequency heating characteristics of the implants in different media combinations, simulating the device being partially immersed inside the patient. MR measurements show RF-induced heating up to 19.6 K for the single electrode, reducing monotonically with larger number of contact sites to a minimum of 0.9 K for the largest grid. The SAR calculated from temperature measurements agrees well with electric field mapping: The same trend is visible for different insertion lengths, however, the energy dissipated by the whole implant varies with the grid size and insertion length. Thus, in the tested circumstances, a larger electrode number either reduced or had a similar risk of RF induced heating, indicating, that the size of electrode grids is a design parameter, which can be used to change an implants RF response and in turn to reduce the risk of RF induced heating and improve the safety of patient with neuro-implants undergoing MRI examinations.

A Method to Study the Correlation Between Local Collagen Structure and Mechanical Properties of Atherosclerotic Plaque Fibrous Tissue.

The rupture of atherosclerotic plaques in coronary and carotid arteries is the primary cause of fatal cardiovascular events. However, the rupture mechanics of the heterogeneous, highly collagenous plaque tissue, and how this is related to the tissue's fibrous structure, are not known yet. Existing pipelines to study plaque mechanics are limited to obtaining only gross mechanical characteristics of the plaque tissue, based on the assumption of structural homogeneity of the tissue. However, fibrous plaque tissue is structurally heterogeneous, arguably mainly due to local variation in the collagen fiber architecture. The mechano-imaging pipeline described here has been developed to study the heterogeneous structural and mechanical plaque properties. In this pipeline, the tissue's local collagen architecture is characterized using multiphoton microscopy (MPM) with second-harmonic generation (SHG), and the tissue's failure behavior is characterized under uniaxial tensile testing conditions using digital image correlation (DIC) analysis. This experimental pipeline enables correlation of the local predominant angle and dispersion of collagen fiber orientation, the rupture behavior, and the strain fingerprints of the fibrous plaque tissue. The obtained knowledge is key to better understand, predict, and prevent atherosclerotic plaque rupture events.

Reactivation of Disseminated Histoplasmosis With Central Nervous System Involvement Following a Primary Gastrointestinal Histoplasmosis Infection: A Case Report.

A 78-year-old white male with chronic pancytopenia presented with acute transient aphasia and dysarthria. He had a National Institutes of Health Stroke Scale (NIHSS) of zero. Physical examination revealed slight aphasia with mild dysarthria. Brain magnetic resonance imaging (MRI) revealed nine ring-enhancing lesions in the left precentral gyrus with significant vasogenic edema. Lung computed tomography (CT) showed no evidence of pulmonary nodules. The serology of blood and urine for infectious organisms was negative. Four weeks later, the patient was re-admitted with worsening dysarthria and right upper extremity weakness. Repeat head MRI showed a slight increase in the size of the multiple supratentorial ring-enhancing lesions. The magnetic resonance spectroscopy (MRS) findings of the evaluated lesion suggested a fungal etiology. Empiric amphotericin B treatment was initiated, which mitigated central nervous system (CNS) ring-enhancing lesions and resolved the patient's neurological deficits. Early empiric medical treatment of CNS histoplasmosis should be considered in the setting of multiple CNS ring-enhancing lesions and a positive history of histoplasmosis infection, despite negative serological studies.

Early loss of glutathione -s- transferase (GST) activity during diverse forms of acute renal tubular injury.

Glutathione-S-transferases (GSTs) are a diverse group of phase II detoxification enzymes which primarily evoke tissue protection via glutathione conjugation to xenobiotics and reactive oxygen species. Given their cytoprotective properties, potential changes in GST expression during AKI has pathophysiologic relevance. Hence, we evaluated total GST activity, and the mRNA responses of nine cytosolic GST isotypes (GST alpha1, kappa1, mu1/5, omega1, pi1 sigma1, theta1, zeta1 mRNAs), in five diverse mouse models of AKI (glycerol, ischemia/reperfusion; maleate, cisplatin, endotoxemia). Excepting endotoxemia, each AKI model significantly reduced GST activity (~35%) during both the AKI "initiation" (0-4 h) and "maintenance" phases (18 or 72 h). During the AKI maintenance phase, increases in multiple GST mRNAs were observed. However, no improvement in GST activity resulted. Increased urinary GST excretion followed AKI induction. However, this could not explain the reduced renal GST activity given that it also fell in response to ex vivo renal ischemia (i.e., absent urinary excretion). GST alpha, a dominant proximal tubule GST isotype, manifested 5-10-fold protein increases following AKI, arguing against GST proteolysis as the reason for the GST activity declines. Free fatty acids (FFAs) and lysophospholipids, which markedly accumulate during AKI, are known to bind to, and suppress, GST activity. Supporting this concept, arachidonic acid addition to renal cortical protein extracts caused rapid GST activity reductions. Based on these results, we conclude that diverse forms of AKI significantly reduce GST activity. This occurs despite increased GST transcription/translation and independent of urinary GST excretion. Injury-induced generation of endogenous GST inhibitors, such as FFAs, appears to be a dominant cause.