Magnetically Doped Molybdenum Disulfide Layers for Enhanced Carbon Dioxide Capture.

Carbon capture and storage (CCS) technologies have the potential for reducing greenhouse gas emissions and creating clean energy solutions. One of the major aspects of the CCS technology is designing energy-efficient adsorbent materials for carbon dioxide capture. In this research, using a combination of first-principles theory, synthesis, and property measurements, we explore the CO2 gas adsorption capacity of MoS2 sheets via doping with iron, cobalt, and nickel. We show that substitutional dopants act as active sites for CO2 adsorption. The adsorption performance is determined to be dependent on the type of dopant species as well as its concentration. Nickel-doped MoS2 is found to be the best adsorbent for carbon capture with a relatively high gas adsorption capacity compared to pure MoS2 and iron- and cobalt-doped MoS2. Specifically, Brunauer-Emmett-Teller (BET) measurements show that 8 atom % Ni-MoS2 has the highest surface area (51 m2/g), indicating the highest CO2 uptake relative to the other concentrations and other dopants. Furthermore, we report that doping could lead to different magnetic solutions with changing electronic structures where narrow band gaps and the semimetallic tendency of the substrate are observed and can have an influence on the CO2 adsorption ability of MoS2. Our results provide a key strategy to the characteristic tendencies for designing highly active and optimized MoS2-based adsorbent materials utilizing the least volume of catalysts for CO2 capture and conversion.

Ab Initio Study of Hydrostable Metal-Organic Frameworks for Postsynthetic Modification and Tuning toward Practical Applications.

Metal-organic frameworks (MOFs), a subclass of nanoporous coordination polymers, have emerged as one of the most promising next-generation materials. The postsynthetic modification method, a strategy that provides tunability and control of these materials, plays an important role in enhancing its properties and functionalities. However, knowing adjustments which leads to a desired structure-function a priori remains a challenge. In this comprehensive study, the intermolecular interactions between 21 industrially important gases and a hydrostable STAM-17-OEt MOF were investigated using density functional theory. Substitutions on its 5-ethoxy isophthalate linker included two classes of chemical groups, electron-donating (-NH2, -OH, and -CH3) and electron-withdrawing (-CN, -COOH, and -F), as well as the effect of mono-, di-, and tri-substitutions. This resulted in 651 unique MOF-gas complexes. The adsorption energies at the ground state and room temperature, bond lengths, adsorption geometry, natural bond orbital analysis of the electric structure, HOMO-LUMO interactions, and the predicted zwitterionic properties are presented and discussed. This study provides a viable strategy for the functionalization, which leads to the strongest affinity for each gas, an insight into the role of different chemical groups in adsorbing various gas molecules, and identifies synthetic routes for moderating the gas adsorption capacity and reducing water adsorption. Recommendations for various applications are discussed. A custom Python script to assess and visualize the hypothetical separation of two equal gas mixtures of interest is provided. The methodology presented here provides new opportunities to expand the chemical space and physical properties of STAM-17-OEt and advances the development of other hydrostable MOFs.

Surface localized magnetism in transition metal doped alumina.

Alumina is a structural ceramic that finds many uses in a broad range of applications. It is widely employed in the aerospace and biomedical sectors due to its stability at high temperatures and in harsh chemical environments. Here, we show that magnetism can be induced at alumina surfaces by doping with 3d transition metals. We analyze the electronic structure, spin magnetic moments, and spin density of [Formula: see text]-Al[Formula: see text]O[Formula: see text] as a function of both dopant species (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu) and depth using first principles calculations. Our results show that all dopants, with the exception of Sc, produce magnetic moments that are concentrated to the surface of alumina with varying degrees of delocalization. It is seen that all of the dopants are at least meta-stable on the surface and must overcome an energy barrier of 0.19-1.14 eV in order to diffuse from the surface into the bulk. As a result of judiciously doping with select 3d transition metals the surface of alumina can be made magnetic. This could lead to novel applications in data storage, catalysis, and biomedical engineering through an added surface functionality.

Surface structure and energetics of low index facets of bismuth ferrite.

Bismuth ferrite (BiFeO3) is a multiferroic material that has received significant interest due to its functional properties which could lead to potential novel applications in microelectronics, spintronics, and controlled catalytic reactions. Here, we provide the results of an extensive theoretical study to understand the surface structure and describe the energetics of differently terminated BiFeO3 surfaces. We specifically evaluate low index crystal facets and surface level atomic terminations via density functional theory and ab initio thermodynamics techniques. Our findings indicate that surface stability with varying terminations is strongly dependent on the oxygen partial pressure and chemical potentials of bismuth and iron. In oxygen rich environments, the results suggest that (100)-O and (110)-O and terminated surfaces are more stable compared to other surface terminations and facets. On the other hand, in a relatively oxygen poor environments, we observe that (110)-Bi and (110)-Fe are more stable. The calculations also show that the majority of BFO surfaces exhibit metallic behavior with the exception of the O-terminated (100) and (110) surfaces.

Electronic and Magnetic Properties of Lanthanum and Strontium Doped Bismuth Ferrite: A First-Principles Study.

While bismuth ferrite BiFeO3 (BFO) is a well studied multiferroic material, its electronic and magnetic properties in the presence of A-site dopants have not been explored widely. Here we report the results of a systematic study of the local electronic structure, spontaneous polarization, and magnetic properties of lanthanum (La) and strontium (Sr) doped rhombohedral bismuth ferrite within density functional theory. An enhanced ferroelectric polarization of 122.43 µC/cm2 is predicted in the uniformly doped BiLaFe2O6. We find that substitution of Sr in the A-site drives the system into a metallic state. The nature of magnetism arises mainly from the B-site Fe exhibiting a G-type antiferromagnetic ordering. Our study finds that upon dopant substitution, the local magnetic moment is decreased and its magnitude is dependent on the distance between the Fe and the dopant atom. The correlation between the local moment and the distance between the Fe and the dopant atom is discussed.

Mesoporous Iron Sulfide for Highly Efficient Electrocatalytic Hydrogen Evolution.

We report a facile synthetic protocol to prepare mesoporous FeS2 without the aid of hard template as an electrocatalyst for the hydrogen evolution reaction (HER). The mesoporous FeS2 materials with high surface area were successfully prepared by a sol-gel method following a sulfurization treatment in an H2S atmosphere. A remarkable HER catalytic performance was achieved with a low overpotential of 96 mV at a current density of 10 mA·cm-2 and a Tafel slope of 78 mV per decade under alkaline conditions (pH 13). The theoretical calculations indicate that the excellent catalytic activity of mesoporous FeS2 is attributed to the exposed (210) facets. The mesoporous FeS2 material might be a promising alternative to the Pt-based electrocatalysts for water splitting.

Mesoporous Manganese Oxide Catalyzed Aerobic Oxidative Coupling of Anilines To Aromatic Azo Compounds.

Herein we introduce an environmentally friendly approach to the synthesis of symmetrical and asymmetrical aromatic azo compounds by using air as the sole oxidant under mild reaction conditions in the presence of cost-effective and reusable mesoporous manganese oxide materials.

A new method for achieving enhanced dielectric response over a wide temperature range.

We report a novel approach for achieving high dielectric response over a wide temperature range. In this approach, multilayer ceramic heterostructures with constituent compositions having strategically tuned Curie points (T(C)) were designed and integrated with varying electrical connectivity. Interestingly, these multilayer structures exhibited different dielectric behavior in series and parallel configuration due to variations in electrical boundary conditions resulting in the differences in the strength of the electrostatic coupling. The results are explained using nonlinear thermodynamic model taking into account electrostatic interlayer interaction. We believe that present work will have huge significance in design of high performance ceramic capacitors.

Interlayer coupling in ferroelectric bilayer and superlattice heterostructures.

Ferroelectric multilayers and superlattices have gained interest for dynamic random access memory (DRAM) applications and as active elements in tunable microwave devices in the telecommunications industry. A number of experimental studies have shown that these materials have many peculiar properties which cannot be described by a simple series connection of the individual layers that make up the heterostructures. A thermodynamic analysis is presented to demonstrate that ferroelectric multilayers interact through internal elastic, electrical, and electromechanical fields and the strength of the coupling can be quantitatively described using Landau theory of phase transformations, theory of elasticity, and principles of electrostatics. The theoretical analysis shows that compositional variations across ferroelectric bilayers result in a broken spatial inversion symmetry that can lead to asymmetric thermodynamic potentials favoring one ferroelectric ground state over the other. Furthermore, the thermodynamic modeling indicates that there is a strong electrostatic coupling between the layers that leads to the suppression of ferroelectricity at a critical paraelectric layer thickness for ferroelectric-paraelectric bilayers. This bilayer is expected to have a gigantic dielectric response similar to the dielectric anomaly near Curie-Weiss temperature in homogeneous ferroelectrics at this critical thickness.