Dietary inflammatory potential and severe headache or migraine: a systematic review of observational studies.

OBJECTIVES: We conducted the current systematic review to investigate the association between dietary inflammatory index (DII) and severe headaches or migraine among adults via synthesizing observational evidence. METHOD: We conducted a systematic literature search of observational studies through PubMed, Scopus, and Web of Science databases from inception until July 2024. The PECO framework was implemented to select eligible studies as follows: Population (adults with severe headache or migraine), Exposure (individuals with the highest adherence to a pro-inflammatory diet), Comparison (individuals with the lowest adherence to a pro-inflammatory diet), Outcome (risk of developing severe headache or migraine, headaches frequency, duration, severity, and migraine-related disability). RESULTS: After reviewing six studies involving 31,958 individuals, we found that following an anti-inflammatory diet is associated with a lower frequency and severity of migraine headaches. Additionally, our research revealed that individuals with migraines tend to have lower adherence to an anti-inflammatory diet when compared to people without migraines. Surprisingly, adherence to a pro-inflammatory diet was linked to a reduced risk of chronic daily headaches. CONCLUSION: Present findings imply a negative link between an inflammatory diet and severe headaches or migraine. However, further well-designed longitudinal studies are needed to interpret the causality and shed light on the underlying mechanisms.

Trigeminal n eu ra l gia diagnosis - a c ha l lenge - a cros s-se ct ional sur ve y to a ssess the k nowledge and a ttit ud e among t he dentists of S au di A ra bia.

OBJECTIVE: To analyse the knowledge level and attitude of Saudi dentists regarding trigeminal neuralgia. METHODS: The cross-sectional study was conducted from 17/12/ 2020 - 9/2/2021 at Prince Sat t am Bin Abdulaziz University, Al-Kharj, Riyadh Elm University, Riyadh, and Dar Al-Uloom University, Riyadh, Kingdom of Saud i Arabia. The sample comprised dentists and postgraduate dental students from every speciality. Data was collected online using a predesigned self-structured questionnaire consisting of three par ts, assessing knowledge, practice and attitude of the subjects. Data was analysed using SPSS 22. RESULTS: A total of 202 questionnaire about the knowledge level and attitude of Saudi dentists regarding trigeminal neuralgia were completed. The knowledge level was significantly higher in those senior age group compared to the young dentists with respect to the type of pain observed in TN, the unilateral pain of TN, and the abrupt, unexpected and transient nature of TN pain, local anaesthetic, the first-line treatment for TN, and the effect of TN on oral hygiene. CONCLUSIONS: Older and experienced dentists had more knowledge than younger and less experienced ones.

Effectiveness of ChatGPT in remote learning environments: An empirical study with medical students in Saudi Arabia.

Purpose: This study aims to assess the effectiveness of ChatGPT in remote learning among medical students. Methods: This cross-sectional survey study recruited 386 medical students from three public universities in Saudi Arabia. Participants completed an online questionnaire designed to assess perceptions of ChatGPT's effectiveness in remote learning. The questionnaire included Likert scale questions to evaluate various aspects of ChatGPT's support in remote learning, such as personalized learning, language and communication skills, and interactive quizzing. Data were analyzed using SPSS, employing descriptive statistics, independent samples t-tests, one-way ANOVA, and Cronbach's alpha to evaluate reliability. Results: Participants mostly used ChatGPT on a weekly (43.2%) or daily (48.7%) basis, primarily on personal computers (62.5%). Mean scores for ChatGPT's support in remote learning were high for personalized learning (4.35), language and communication skills (4.23), and interactive quizzing and assessments (4.01). Statistically significant differences were found based on gender for interactive quizzing (p = .0177) and continuity of education (p = .0122). Conclusion: Despite certain challenges and variations in perceptions based on gender and education level, the overwhelmingly positive attitudes toward ChatGPT highlight its potential as a valuable tool in medical education.

Enhancing medical students critical thinking skills through ChatGPT: An empirical study with medical students.

STUDY PURPOSE: This study aims to assess the effectiveness of ChatGPT in critical thinking skills among medical students. METHODS: This cross-sectional survey study recruited 392 medical students from three public universities in Saudi Arabia. Participants completed an online questionnaire assessing perceptions of ChatGPT's impact on critical thinking skills. Data were analyzed using SPSS, employing descriptive statistics, t-tests, analysis of variance, and Cronbach's alpha to evaluate reliability. RESULTS: Significant gender-based differences were found in perceptions of ChatGPT's efficacy, particularly in generating diverse perspectives (P = 0.0407*) and encouraging questioning (P = 0.0277*). Reflective practice perceptions varied significantly by age (P = 0.0302*), while academic backgrounds yielded significant differences across all factors assessed (P < 0.0001*). Overall, 92.6% believed integrating ChatGPT would benefit critical thinking skills. Most participants (N = 174) strongly agreed that ChatGPT improved critical thinking. CONCLUSION: Integrating ChatGPT into medical education could offer valuable opportunities for fostering critical thinking abilities, albeit with the need for addressing associated challenges and ensuring inclusivity.

Endoscopy of Low BMI Patients Compared to Normal BMI Patients: A Study From the Aseer Region, Saudi Arabia.

Gastrointestinal (GI) endoscopies are essential for detecting and treating various digestive tract problems. While typically safe, these treatments can entail the risk of severe adverse events (SAEs), especially in individuals with a low body mass index (BMI). The current study aimed to evaluate whether post-endoscopy SAEs are more common in patients with low BMI and find risk factors for serious adverse outcomes in Saudi Arabian patients from Khamis Mushait, Aseer region, Saudi Arabia. The data of 398 adult patients with abdominal endoscopies between April and November 2023 were analyzed. Patients were divided into two groups: low BMI (BMI ≤ 18.5) and control (18.5 ≤ BMI ≤ 30). They were matched for age, gender, comorbidities, endoscopy type, and other pertinent characteristics. Low-BMI patients (Group I, n = 108) were substantially younger and had lower levels of albumin and total protein than the control group (Group II, n = 209). Comorbidities varied between groups, with diabetes mellitus more prevalent in Group II and inflammatory bowel disease (IBD) more commonplace in Group I. Treatment options also differed, with Group I receiving more biological treatments, steroids, and feeding tubes. Endoscopic procedures and indications were comparable among groups, with no significant variations in post-endoscopy complications. The endoscopy results varied from gastritis to colon malignancy, with no SAEs recorded in either group. Unlike earlier findings, this study found no higher incidence of SAEs in low-BMI individuals having abdominal endoscopy. This might be because of the restricted guidelines of different medical authorities, including clear informed consent that illustrates any risks, benefits, alternatives, sedation plan, and potential diagnostic or therapeutic interventions. Also, professional endoscopists and consultants who ensure adequate visualization of the GI mucosa, using mucosal cleansing and insufflation as necessary, should avoid any risk of abdominal hemorrhage. These findings highlight the significance of personalized risk assessment and pre-procedural optimization, including nutritional assistance, in this patient population. More prospective research with larger sample sizes is needed to validate these findings and create targeted techniques for improving outcomes in individuals with a low BMI having endoscopic operations.

The Impact of HIV Upon the PCI Results: A Systematic Review and Meta-Analysis.

The aim of this systematic review and meta-analysis was to comprehensively evaluate the latest evidences and summarise the impact of HIV on PCI outcomes. A PRISMA guided literature search was conducted on 14 February 2024 in Web of Science, PubMed, Virtual Health Library, Google Scholar and Scopus. We searched with the term '("percutaneous coronary intervention" OR "PCI") AND ("human immunodeficiency virus" OR "HIV" OR "acquired immunodeficiency syndrome" OR "AIDS")' after selecting the keywords from randomly chosen included papers. We included 8 papers of 781 screened records. HIV (+) patients had significant in-hospital, 1-year and overall (event at the last follow up point) all-cause mortality compared to HIV (-) group (OR: 1.73, 95%CI: 1.57-1.90, p < 0.01), (OR: 1.39, 95%CI: 1.07-1.81, p = 0.01) and (OR: 1.69, 95%CI: 1.55-1.85, p < 0.01), respectively. HIV (+) patients had significantly higher odds of developing MACE (OR: 1.35, 95%CI: 1.12-1.62, p = 0.001) compared to the HIV (-) group. No differences between both groups were detected regarding in-hospital and overall CV mortality, TVR, TLR, post-PCI TIMI grade 3 flow, cerebrovascular accidents and recurrent coronary events (p > 0.05). Our study revealed that people with HIV who underwent PCI in this modern era may have worse short and long-term PCI outcomes. This finding highlights the need for specialised cardiovascular care protocols for the HIV population. However, enhanced clinical management and preventative measures are imperative to improve PCI success rates in patients with HIV.

Diagnosis of Small Intestinal Diaphragms and Strictures Induced by Non-steroidal Anti-inflammatory Drugs Through Intraoperative Enteroscopy: A Case Study From Saudi Arabia.

The small intestinal diaphragms are a rare condition characterized by focal or diffuse luminal narrowing in the small intestine. Nonsteroidal anti-inflammatory drugs (NSAIDs) have been associated with the development of small intestinal diaphragms, particularly in long-term and high-dose users. In the current report, a Saudi adult female complained of abnormal bowel motions, which caused severe abdominal pain. She had long-term treatment with NSAID. Systemic and physical examination was unremarkable, apart from poorly localized, nonspecific tenderness to abdominal palpation. Two endoscopic investigations (upper and lower endoscopy) were performed to identify any abnormalities in the digestive system; also, a biopsy was taken for histopathological analysis. In addition, another capsule endoscopy was done to investigate any abnormal bowel motion. The findings of two endoscopic investigations and histopathological analysis of duodenum biopsies revealed different features of small intestinal diaphragms and stricture. The biopsies showed mild chronic inflammation. The esophagogastroduodenoscopy (EGD) and colonoscopy showed multiple strictures and ulcerations in the small bowel. Also, a diffused mucosal erythema of the stomach and a remarkable scar on the third part of the duodenum were detected. That might be due to the excessive use of NSAIDs. The investigations revealed multiple small bowel diaphragmatic stenosis and strictures in the proximal and distal small bowel. These are distinct signs of NSAID-induced small bowel diaphragms and strictures.

The Impact of Repeated Steam Sterilization Cycles on the Efficacy of Chairside Adjustment Kits for Polishing Monolithic Multi-Layered Zirconia Dental Restoration Material.

BACKGROUND Before insertion, chairside adjustment kits are heat sterilized for positioning and polishing dental restorations. This study aimed to evaluate the effects of 2 steam sterilization cycles on the efficacy of polishing highly translucent monolithic zirconia (HTMLZ) dental restoration material. MATERIAL AND METHODS 100 HTMLZ disc-shaped specimens were adjusted (grinding, finishing, polishing) with EVE Diacera kit. Two steam sterilization techniques [standard (Gp S), immediate/flash (Gp (F)] of CAK were further subgrouped based on number of sterilization cycles [cycle 1 (control), cycle 5, 10, 15, and 20 (experimental)] (n=10 each). Each subgroup accordingly was evaluated for average surface roughness (Ra) and root mean square roughness (Rq) using a profilometer. Mean and standard deviation of 5 subgroups were statistically analyzed using one-way ANOVA/post hoc Tukey's test. Scanning electron microscopy complemented Ra, Rq measurements. Statistical differences of P≤0.05 were considered significant. RESULTS HTMLZ specimens in both groups showed increased (Ra/Rq) values after repeated sterilization of EVE Diacera kit, with Gp F showing lesser increase than Gp S (20 cycles). Gp F at 10 cycles and Gp S at 15 cycles showed clinically unacceptable roughness threshold (0.25 µm). Differences between subgroups for Ra and Rq values were significant (P≤0.05) with less differences within groups observed in early cycles (1, 10). Results validate the manufacturer's recommendations of using flash sterilization/10 cycles for EVE Diacera kit. CONCLUSIONS Repeated sterilization reduces efficacy of chairside adjustment kit to produce smooth surfaces on HTMLZ. This study recommends flash sterilization to a maximum of 10 times to get the clinically acceptable results of Ra and Rq.

Evaluation of Apixaban standard dosing in underweight patients with non-valvular atrial fibrillation: a retrospective cohort study.

BACKGROUND: Recent guidelines recommend using direct oral anticoagulants (DOACs) as first-line agents in patients with non-valvular atrial fibrillation (NVAF). Research is currently investigating the use of Apixaban in underweight patients, with some results suggesting altered pharmacokinetics, decreased drug absorption, and potential overdosing in this population. This study examined the effectiveness and safety of standard Apixaban dosing in adult patients with atrial NVAF weighing less than 50 kg. METHODS: This is a retrospective cohort study conducted at King Abdulaziz Medical City (KAMC); adult patients with a body mass index (BMI) below 25 who received a standard dose of Apixaban (5 mg twice daily) were categorized into two sub-cohorts based on their weight at the time of Apixaban initiation. Underweight was defined as patients weighing ≤ 50 kg, while the control group (Normal weight) comprised patients weighing > 50 kg. We followed the patients for at least one year after Apixaban initiation. The study's primary outcome was the incidence of stroke events, while secondary outcomes included bleeding (major or minor), thrombosis, and venous thromboembolism (VTE). Propensity score (PS) matching with a 1:1 ratio was used based on predefined criteria and regression model was utilized as appropriate. RESULTS: A total of 1,433 patients were screened; of those, 277 were included according to the eligibility criteria. The incidence of stroke events was lower in the underweight than in the normal weight group at crude analysis (0% vs. 9.1%) p-value = 0.06), as well in regression analysis (OR (95%CI): 0.08 (0.001, 0.76), p-value = 0.002). On the other hand, there were no statistically significant differences between the two groups in the odds of major and minor bleeding (OR (95%CI): 0.39 (0.07, 2.03), p-value = 0.26 and OR (95%CI): 1.27 (0.56, 2.84), p-value = 0.40, respectively). CONCLUSION: This exploratory study revealed that underweight patients with NVAF who received standard doses of Apixaban had fewer stroke events compared to normal-weight patients, without statistically significant differences in bleeding events. To confirm these findings, further randomized controlled trials with larger sample sizes and longer observation durations are required.

Assessment of dimensional stability of novel VPES impression material at different time intervals with standard disinfectants.

BACKGROUND: Vinyl polyether silicone (VPES) is a novel impression biomaterial made of a combination of vinyl polysiloxane (VPS) and polyether (PE). Thus, it is significant to assess its properties and behaviour under varied disinfectant test conditions. This study aimed to assess the dimensional stability of novel VPES impression material after immersion in standard disinfectants for different time intervals. METHODS: Elastomeric impression material used -medium body regular set (Monophase) [Exa'lence GC America]. A total of 84 Specimens were fabricated using stainless steel die and ring (ADA specification 19). These samples were distributed into a control group (n=12) and a test group (n=72). The test group was divided into 3 groups, based on the type of disinfectant used - Group-A- 2% Glutaraldehyde, Group-B- 0. 5% Sodium hypochlorite and Group-C- 2% Chlorhexidine each test group was further divided into 2 subgroups (n=12/subgroup) based on time intervals for which each sample was immersed in the disinfectants - subgroup-1- 10 mins and Subgroup 2- 30 mins. After the impression material was set, it was removed from the ring and then it was washed in water for 15 seconds. Control group measurements were made immediately on a stereomicroscope and other samples were immersed in the three disinfection solutions for 10 mins and 30 mins to check the dimensional stability by measuring the distance between the lines generated by the stainless steel die on the samples using a stereomicroscope at x40 magnification. RESULTS: The distance measured in the control group was 4397.2078 µm and 4396.1571 µm; for the test group Group-A- 2% Glutaraldehyde was 4396.4075 µm and 4394.5992 µm; Group-B- 0. 5% Sodium hypochlorite was 4394.5453 µm and 4389.4711 µm Group-C- 2% Chlorhexidine was 4395.2953 µm and 4387.1703 µm respectively for 10 mins and 30 mins. Percentage dimensional change was in the range of 0.02 - 0.25 for all the groups for 10 mins and 30 mins. CONCLUSIONS: 2 % Glutaraldehyde is the most suitable disinfectant for VPES elastomeric impression material in terms of dimensional stability and shows minimum dimensional changes as compared to that of 2% Chlorhexidine and 0.5% Sodium hypochlorite.

Dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models over periods of time.

BACKGROUND: Dental casts made utilising digital workflow are becoming more common because to their speed and cost savings. However, studies on their dimensional accuracy over time with diverse designs are missing. OBJECTIVE: The aim of this in vitro study was to assess the dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models with 50-micrometer resolution over 1 day, 14 days, and 28 days using surface matching software. METHODS: Scanned edentulous and fully dentate maxillary typodont models were used as references. The models were scanned by a desktop lab scanner of 15-micrometer accuracy (D900, 3Shape). Then, the files were used in designing software (Meshmixer, Autodesk) to create hollowed maxillary casts. Fifteen edentulous and 15 fully dentate (total of 30) models were printed using a DLP lab printer (Cara print 4.0, Kulzer). The 3D-printed models were scanned using the same desktop lab scanner of 15-micrometer accuracy at intervals of baseline days, 1 day, 14 days, and 28 days to assess the effect of aging (n = 120). The dimensional changes were quantified and compared using the root mean square (RMS) method, expressed in micrometres (µm). The study employed repeated measures analysis of variance (ANOVA) to assess and compare the root mean square (RMS) values across the variables. The data was analysed using SPSS (26, Chicago, Illinois, USA). RESULTS: The RMS of the edentulous models rapidly increased from a mean value of 0.257 at the beginning of the study to 0.384 after twenty-eight days. However, the mean RMS values for the dentate models did not change much over the four intervals. It varied only from 0.355 to 0.347. The mean values for edentulous patients increased from 0.014 to 0.029 during the period from baseline to twenty-eight days. However, the mean average values decreased for the dentate models from 0.033 to 0.014 during this period. By utilizing ANOVA, mean RMS values increased insignificantly till one day but significantly to fourteen and twenty-eight days. Dentate model mean values differed insignificantly across four intervals. Repeated measures ANOVA for combined and separated data showed no significant differences across edentulous, dentate, and total models over times. CONCLUSION: The study revealed changes in the dimensions of 3D-printed edentulous models over a span of 3 and 4 weeks. Caution should be applied when using 3D-printed dental master models for constructing definitive prostheses on edentulous models over a period of 3 to 4 weeks.

Fennel seeds extract prevents fructose-induced cardiac dysfunction in a rat model of metabolic syndrome via targeting abdominal obesity, hyperuricemia and NF-κß inflammatory pathway.

BACKGROUND: Metabolic syndrome (MetS) is commonly associated with increased risk of cardiac disease that affects a large number of world populations. OBJECTIVE: This research attempted to investigate the efficacy of fennel seeds extract (FSE) in preventing development of cardiac dysfunction in rats on fructose enriched diet for 3 months, as a model of MetS. MATERIALS & METHODS: Thirty adult Wistar male rats (160-170 g) were assigned into 5 groups including control, vehicle, FSE (200 mg/kg BW) and fructose (60%) fed rats with and without FSE. Following the last treatment, blood pressure, ECG and heart rate were measured. Next, blood and cardiac tissues were taken for biochemical and histological investigations. RESULTS: Feeding fructose exhibited characteristic features of MetS involving, hypertension, abnormal ECG, elevated heart rate, serum glucose, insulin, lipids and insulin resistance, accompanied by abdominal obesity, cardiac hypertrophy and hyperuricemia. Fructose fed rats also showed significant reduction in cardiac antioxidants (GSH, SOD, CAT) with elevation in oxidative stress indices (NADPH oxidase, O2.-, H2O2, MDA, PCO), NF-κß, pro-inflammatory cytokines (TNF-α, IL-1ß, IL-6), adhesion molecules (ICAM-1, VCAM-1) and serum cardiac biomarkers (AST, LDH, CK-MB, cTn-I). Histopathological changes evidenced by destruction of cardiac myofibrils, cytoplasmic vacuolization, and aggregation of inflammatory cells were also detected. Consumption of FSE showed high ability to alleviate fructose-induced hypertension, ECG abnormalities, cardiac hypertrophy, metabolic alterations, oxidative stress, inflammation and histological injury. CONCLUSION: Findings could suggest FSE as a complementary supplement for preventing MetS and associated cardiac outcomes. However, well controlled clinical studies are still needed.

Radial artery pseudoaneurysm a rare complication after coronary angiography: A case report and systematic review of the reported cases.

This is a case of 83 years old male who had radial artery pseudoaneurysm after cardiac catheterization. The diagnosis was through Doppler ultrasound and the patient was treated with thrombin injection and reported good outcomes. The literature also included 41 cases of pseudoaneurysm after catheterization. The mean age of patients was 68.5 years with a male prevalence of 49%. Onset of pseudoaneurysm ranged from 0 days (directly after the catheterization) to 150 days with a median of 5 days. The treatment of patients was mainly surgical (19 cases) followed by compression (either manual or TR band) (12 cases), thrombin injection (four cases), compression then surgery (three cases), compression then thrombin injection (one case), percutaneous endovascular repair using a covered stent (one case) and not reported in one case. All cases recovered well.

Assessment of Physicians' Practice in Implementing Antibiotic Stewardship Program in Najran City, Saudi Arabia: A Cross-Sectional Study.

INTRODUCTION: One of the main causes of illness, mortality, and rising medical costs is antimicrobial resistance, which is a global healthcare concern. OBJECTIVES: This study explores the practice of physicians toward the effective implementation of Antibiotic Stewardship Programs (ASPs) in Najran city, Saudi Arabia. METHODOLOGY: This cross-sectional study was conducted among physicians working at primary care setting in Najran city, Saudi Arabia, between May and August 2023. A self-administered questionnaire was distributed among the physicians composed of three parts: socio-demographic data, a questionnaire about physicians' practice in the efficacy of ASP, and a questionnaire about physicians' practice regarding prescribing antibiotics. RESULTS: Of the 128 physicians who participated in the study, 60.2% were males, and 43.8% were aged between 36 and 45 years. Among the practices in implementing the ASP effectively, controlling the source of infection domain received the highest score (mean score: 4.83). Every practice domain mean score was greater than 3, indicating that study participants possessed a moderate level of ASP practice and implementation skills. The overall mean practice score in the effective implementation of ASP was 154.9 ± 25.5 out of 185 points, with good, moderate, and poor practices constituting 67.2%, 28.1%, and 4.7%, respectively. CONCLUSIONS: The physicians showed a moderate level of practice for the effective implementation of ASPs in Najran city. The factors significantly associated with increased practice score include older age, male gender, Saudi nationality, handling five or fewer infection cases daily, and infection-initiated antibiotic prescribing treatment managed per day. These findings suggest the need for targeted interventions and educational programs to enhance physicians' adherence to ASP guidelines and promote appropriate antibiotic prescribing practices, ultimately contributing to global efforts in combating antimicrobial resistance and improving patient outcomes.

The COVID-19 pandemic and its effects on follow-up of patients with early breast cancer: A patient survey.

PURPOSE: Despite limited evidence supporting its effectiveness, most guidelines recommend long-term, routinely scheduled in-person surveillance of patients with early breast cancer (EBC). The COVID-19 pandemic led to increased use of virtual care. This survey evaluated patient perspectives on follow-up care. METHODS: Patients with EBC undergoing surveillance were surveyed about follow-up protocols, perceptions, and interest in clinical trials assessing different follow-up strategies. RESULTS: Of 402 approached patients 270 completed the survey (response rate 67%). Median age 62.5 years (range 25-86) and median time since breast cancer diagnosis was 3.8 years (range < 1-33 years). Most (n = 148/244, 60%) were followed by more than one provider. Routine follow-ups with breast examination were mostly conducted by medical/radiation oncologists every 6 months (n = 110/236, 46%) or annually (n = 106/236, 44%). Participants felt routine follow-up was useful to monitor for recurrence, manage side effects of cancer treatment and to provide support/reassurance. Most participants felt regular follow-up care would detect recurrent cancer earlier (n = 214/255, 96%) and increase survival (n = 218/249, 88%). The COVID-19 pandemic reduced the number of in-person visits for 54% of patients (n = 63/117). Patients were concerned this reduction of in-person visits would lead to later detection of both local (n = 29/63, 46%) and distant recurrences (n = 25/63, 40%). While many felt their medical and radiation oncologists were the most suited to provide follow-up care, 55% felt comfortable having their primary care provider (PCP) conduct surveillance. When presented with a scenario where follow-up has no effect on earlier detection or survival, 70% of patients still wanted routine in-person follow-up for reassurance (63%) with the goal of earlier recurrence detection (56%). CONCLUSIONS: Despite limited evidence of effectiveness of routine in-person assessment, patients continue to place importance on regularly scheduled in-person follow-up.

Self-Medication Related Knowledge, Attitudes, and Practices among Residents of Riyadh, Saudi Arabia: A Community-Based Cross-Sectional Study.

Rational and responsible self-medication (SM) is an essential core element for better health outcomes. It is influenced mainly by the level and adequacy of knowledge, attitude, and appropriateness of practice (KAP) towards SM. The present study explored the level and adequacy of KAP among residents of Riyadh city, Saudi Arabia. A convenient snowball sampling method was utilized to recruit the study participants. Data were analyzed using SPSS version 27. Six hundred and eleven participants completed the questionnaire. Residents with good knowledge, positive attitude, and proper practice were 43.7%, 33.1%, and 90.0%, respectively. The level of KAP was significantly influenced by the participant's occupation, age, gender, nationality, marital status, presence of chronic disease, and COVID-19 infection status. The mean knowledge, attitude, and practice scores observed were 5.11 (SD = 1.27), 22.28 (SD = 2.6) and 5.20 (SD = 1.29), respectively. Pearson correlation and scattered plot matrix analysis revealed a significant positive weak correlation among KAP, indicating that residents with good knowledge possess better attitude (r = 0.142, p < 0.001) and follow the proper practice (r = 0.256, p < 0.001) towards SM. Multivariate linear regression revealed a significant (p < 0.001) negative (ß = -0.059) influence of occupation, family members working in the health sector (p = 0.046, ß= -0.426), Body Mass Index (p = 0.019, ß = -0.049), and physical activity (p = 0.018, ß = -0.292) on the overall KAP score. Understanding the residents' level of KAP towards SM would enable the health care system to identify the gap and develop a mechanism to educate the people and make them knowledgeable about SM and self-care.

Evaluation of the Effects of Digital Manufacturing, Preparation Taper, Cement Type, and Aging on the Color Stability of Anterior Provisional Crowns Using Colorimetry.

BACKGROUND Replicating the 3-dimensional (3D) color of natural teeth in artificial substitutes is challenging. Fixed dental prosthodontics require aesthetic, color-stable provisional restorations. Recent milling and 3D printing digital manufacturing techniques offer improved outcomes. This study assesses color stability in various digital manufacturing methods, tapers, and aging effects on anterior provisional resin restorations. MATERIAL AND METHODS Two all-ceramic tooth preparations on typodont teeth with 10° and 20° tapers were converted into experimental dies. Forty temporary crowns were manufactured using 3D printing and computer-aided design/computer-aided manufacturing (milling). Within these 2 groups, 10 crowns were cemented using a regular and clear provisional cement. All samples were thermocycled to simulate clinical use of 6 months. Color difference formula (CIEDE2000) indicated changes between before and after cementation (ΔE00) and between after cementation and after thermocycling (ΔE00[II]). The color change was considered significant in terms of clinically perceptible (ΔE00 ≤0.62) and acceptable (ΔE00 ≤2.62) changes. One-way ANOVA (P value of less than 0.05) calculated overall differences, which were established using a Fisher post hoc test. RESULTS Crowns cemented with clear cement showed fewer color changes irrespective of the manufacturing technique or taper. Notably, only the 10° 3D-printed crown with clear cement had an imperceptible color change at the pre-/post-cementation phase. Meanwhile, the 10° and 20° milled crowns with regular cement exhibited unacceptable color changes after thermocycling. CONCLUSIONS For long­term temporization in the aesthetic zone, properly optimized 3D-printed provisional restorations cemented with clear cement had better color stability.

Technical assessment of shear bond strength at ceramo-alloy interface after various surface treatment combinations and application of metal bonding agent.

BACKGROUND: Bonding between metal and ceramic is one of the most important aspects of a successful prosthesis. Various methods have been recommended for preparing the metal surface to enhance the bond between metal and ceramic including the use of a metal bonding agent. OBJECTIVE: This study aims to evaluate and compare the shear bond strength of the metal-ceramic (M-C) interface after combinations of various surface treatments including the application of a metal bonding agent. METHOD: 40 Ni-Cr alloy specimens were made and divided into 4 groups of 10 each based on the combination of surface treatments. Sandblasting, surface grinding, and Oxidation heat treatment (OHT) were performed on specimens from Group 1 (Control). In addition, Group 2 specimens received ultrasonic cleaning, Group 3 steam cleaning, and Group 4 metal bonding agent application. Following surface treatments on all specimens, porcelain build-up was performed, and shear bond strength was tested in a Digital Universal testing machine. The statistical tests used were independent t-test and ANOVA. RESULTS: Results revealed that Group 4 specimens had the highest mean value of shear bond strength of 39.087 MPa while Group 3 specimens showed the least mean shear bond strength of 18.154 MPa with highly statistically significant results (p< 0.001). CONCLUSION: The surface treatments and application of bonding agent to metal prior to porcelain application resulted in increased shear bond strength of the metal-ceramic interface.

Comparative Evaluation of Dimensional and Occlusal Accuracy of Non-Working Antagonist Casts: A Study on Different Impression Materials and 3D Printing.

BACKGROUND The aim of this study was to assess and compare the vertical/horizontal dimensions and occlusal accuracy of non-working/opposing casts obtained from three different impression materials and 3D print cast. MATERIAL AND METHODS Dentulous Master models simulating a case of a fixed dental prosthesis were mounted on an articulator (control group). Opposing mandibular casts obtained from three different impression materialsand 3-dimensional print constituted test groups , ,and , respectively. Three points, anterior vertical (AV), posterior vertical (PV), and anteroposterior (AP) were compared for dimensional accuracy among casts. Occlusal accuracy was analyzed on Medit Link software at 3 teeth (#13, #17, and #27). After calculating means for each group, the differences were calculated at probability value of P≤0.05 using the single-sample t test, ANOVA, and Tukey test. RESULTS The dimensions were significantly different from those of the mounted master models except in Gp AL(E) and Gp AL(F) at AV dimension and Gp AL(E) at AP dimension (P>0.05). A statistically significant difference of the error of means among the 4 tested groupswere detected only at 2 dimensions (AV and PV) between the Gp AL(E) and Gp 3D-C and between Gp AL(F) and Gp 3D-C groups. Other groups showed no significant differences. CONCLUSIONS The opposing casts obtained from the extended-pour alginate and alginate alternative impression materials showed higher occlusal accuracy compared to conventional alginate and 3D printed casts.

Validation of Digital Impressions' Accuracy Obtained Using Intraoral and Extraoral Scanners: A Systematic Review.

BACKGROUND: At present, the evidence regarding digital impressions' accuracy recorded by using digital scanners is lacking. This systematic review aimed to evaluate whether the type of scanning (intraoral/extraoral) affects the Accuracy of Digital Impressions. METHOD: Two independent reviewers performed a systematic search in the database both electronically and manually (PubMed, Ebsco HOST, the Cochrane Library, and Google Scholar) for articles published from 1 January 2010 to 1 December 2022. This study was registered with the International Prospective Register of Systematic Reviews (PROSPERO CRD42020188765) and followed the PRISMA statement. The question in focus was as follows: Does the type of scanning (intraoral or extraoral) affect the accuracy of digital impression? RESULTS: A total of 449 papers were obtained by searching electronically and manually. In total, 15 complete-text papers qualified for assessment based on eligibility criteria. After reading the full-text articles, five studies were excluded. Ten studies were selected for the qualitative analysis. The qualitative data reported that the accuracy of both types of scanners (intraoral and extraoral) lies within the range of clinical acceptability. Nevertheless, the intraoral scanners seem to be more accurate when compared to the extraoral scanners for a partial arch situation. CONCLUSIONS: Scanning type affects the accuracy of the digital impression. Various factors influence the scanning ability. Intraoral scanners seem to be more accurate compared to extraoral scanners for a partial arch situation. More studies comparing the accuracy of the intraoral scanner and extraoral scanner for a complete arch scan and in an in vivo study setting are needed.