A Functional Network Driven by MicroRNA-125a Regulates Monocyte Trafficking in Acute Inflammation.

During the onset of acute inflammation, rapid trafficking of leukocytes is essential to mount appropriate immune responses towards an inflammatory insult. Monocytes are especially indispensable for counteracting the inflammatory stimulus, neutralising the noxa and reconstituting tissue homeostasis. Thus, monocyte trafficking to the inflammatory sites needs to be precisely orchestrated. In this study, we identify a regulatory network driven by miR-125a that affects monocyte adhesion and chemotaxis by the direct targeting of two adhesion molecules, i.e., junction adhesion molecule A (JAM-A), junction adhesion molecule-like (JAM-L) and the chemotaxis-mediating chemokine receptor CCR2. By investigating monocytes isolated from patients undergoing cardiac surgery, we found that acute yet sterile inflammation reduces miR-125a levels, concomitantly enhancing the expression of JAM-A, JAM-L and CCR2. In contrast, TLR-4-specific stimulation with the pathogen-associated molecular pattern (PAMP) LPS, usually present within the perivascular inflamed area, resulted in dramatically induced levels of miR-125a with concomitant repression of JAM-A, JAM-L and CCR2 as early as 3.5 h. Our study identifies miR-125a as an important regulator of monocyte trafficking and shows that the phenotype of human monocytes is strongly influenced by this miRNA, depending on the type of inflammatory stimulus.

Chances and limitations of isolated mouse heart models for investigating the endothelial glycocalyx1.

BACKGROUND: The endothelial glycocalyx plays a decisive role in maintaining vascular homeostasis. Previous animal models have mainly focused on in-vitro experiments or the isolated beating guinea pig heart. To further evaluate underlying mechanisms of up- and down regulation, knock-out animals seem to be a promising option. OBJECTIVE: Aim of the present study was to evaluate if an isolated mouse-heart model is suitable for glycocalyx research. METHODS: Isolated beating mouse hearts (C57/Bl6J) underwent warm, no-flow ischemia and successive reperfusion. Coronary effluent was analyzed by ELISA and Western blot for the glycocalyx core protein: syndecan-1. Hearts were prepared for either immunofluorescence or electron microscopy and lysed for Western blot analysis. RESULTS: An endothelial glycocalyx covering the total capillary circumference and syndecan-1 were detected by electron and immunofluorescence microscopy. Ischemia/reperfusion seriously deteriorated both findings. Confoundingly, syndecan-1 was not detectable either in the coronary effluent or in the lysates of blood-free hearts by ELISA or Western blot technique. CONCLUSIONS: Blood vessels of mouse hearts contain an endothelial glycocalyx comparable to that of other animals also with respect to its core protein syndecan-1. But, for studies including quantification of intravascular soluble glycocalyx constituents, the amount of syndecan-1 in mouse hearts seems to be too low.

Mechanical Power and Development of Ventilator-induced Lung Injury.

BACKGROUND: The ventilator works mechanically on the lung parenchyma. The authors set out to obtain the proof of concept that ventilator-induced lung injury (VILI) depends on the mechanical power applied to the lung. METHODS: Mechanical power was defined as the function of transpulmonary pressure, tidal volume (TV), and respiratory rate. Three piglets were ventilated with a mechanical power known to be lethal (TV, 38 ml/kg; plateau pressure, 27 cm H2O; and respiratory rate, 15 breaths/min). Other groups (three piglets each) were ventilated with the same TV per kilogram and transpulmonary pressure but at the respiratory rates of 12, 9, 6, and 3 breaths/min. The authors identified a mechanical power threshold for VILI and did nine additional experiments at the respiratory rate of 35 breaths/min and mechanical power below (TV 11 ml/kg) and above (TV 22 ml/kg) the threshold. RESULTS: In the 15 experiments to detect the threshold for VILI, up to a mechanical power of approximately 12 J/min (respiratory rate, 9 breaths/min), the computed tomography scans showed mostly isolated densities, whereas at the mechanical power above approximately 12 J/min, all piglets developed whole-lung edema. In the nine confirmatory experiments, the five piglets ventilated above the power threshold developed VILI, but the four piglets ventilated below did not. By grouping all 24 piglets, the authors found a significant relationship between the mechanical power applied to the lung and the increase in lung weight (r = 0.41, P = 0.001) and lung elastance (r = 0.33, P < 0.01) and decrease in PaO2/FIO2 (r = 0.40, P < 0.001) at the end of the study. CONCLUSION: In piglets, VILI develops if a mechanical power threshold is exceeded.

Lung inhomogeneities and time course of ventilator-induced mechanical injuries.

BACKGROUND: During mechanical ventilation, stress and strain may be locally multiplied in an inhomogeneous lung. The authors investigated whether, in healthy lungs, during high pressure/volume ventilation, injury begins at the interface of naturally inhomogeneous structures as visceral pleura, bronchi, vessels, and alveoli. The authors wished also to characterize the nature of the lesions (collapse vs. consolidation). METHODS: Twelve piglets were ventilated with strain greater than 2.5 (tidal volume/end-expiratory lung volume) until whole lung edema developed. At least every 3 h, the authors acquired end-expiratory/end-inspiratory computed tomography scans to identify the site and the number of new lesions. Lung inhomogeneities and recruitability were quantified. RESULTS: The first new densities developed after 8.4 ± 6.3 h (mean ± SD), and their number increased exponentially up to 15 ± 12 h. Afterward, they merged into full lung edema. A median of 61% (interquartile range, 57 to 76) of the lesions appeared in subpleural regions, 19% (interquartile range, 11 to 23) were peribronchial, and 19% (interquartile range, 6 to 25) were parenchymal (P < 0.0001). All the new densities were fully recruitable. Lung elastance and gas exchange deteriorated significantly after 18 ± 11 h, whereas lung edema developed after 20 ± 11 h. CONCLUSIONS: Most of the computed tomography scan new densities developed in nonhomogeneous lung regions. The damage in this model was primarily located in the interstitial space, causing alveolar collapse and consequent high recruitability.

Compressive forces and computed tomography-derived positive end-expiratory pressure in acute respiratory distress syndrome.

BACKGROUND: It has been suggested that higher positive end-expiratory pressure (PEEP) should be used only in patients with higher lung recruitability. In this study, the authors investigated the relationship between the recruitability and the PEEP necessary to counteract the compressive forces leading to lung collapse. METHODS: Fifty-one patients with acute respiratory distress syndrome (7 mild, 33 moderate, and 11 severe) were enrolled. Patients underwent whole-lung computed tomography (CT) scan at 5 and 45 cm H2O. Recruitability was measured as the amount of nonaerated tissue regaining inflation from 5 to 45 cm H2O. The compressive forces (superimposed pressure) were computed as the density times the sternum-vertebral height of the lung. CT-derived PEEP was computed as the sum of the transpulmonary pressure needed to overcome the maximal superimposed pressure and the pleural pressure needed to lift up the chest wall. RESULTS: Maximal superimposed pressure ranged from 6 to 18 cm H2O, whereas CT-derived PEEP ranged from 7 to 28 cm H2O. Median recruitability was 15% of lung parenchyma (interquartile range, 7 to 21%). Maximal superimposed pressure was weakly related with lung recruitability (r = 0.11, P = 0.02), whereas CT-derived PEEP was unrelated with lung recruitability (r = 0.0003, P = 0.91). The maximal superimposed pressure was 12 ± 3, 12 ± 2, and 13 ± 1 cm H2O in mild, moderate, and severe acute respiratory distress syndrome, respectively, (P = 0.0533) with a corresponding CT-derived PEEP of 16 ± 5, 16 ± 5, and 18 ± 5 cm H2O (P = 0.48). CONCLUSIONS: Lung recruitability and CT scan-derived PEEP are unrelated. To overcome the compressive forces and to lift up the thoracic cage, a similar PEEP level is required in higher and lower recruiters (16.8 ± 4 vs. 16.6 ± 5.6, P = 1).

Lung inhomogeneity in patients with acute respiratory distress syndrome.

RATIONALE: Pressures and volumes needed to induce ventilator-induced lung injury in healthy lungs are far greater than those applied in diseased lungs. A possible explanation may be the presence of local inhomogeneities acting as pressure multipliers (stress raisers). OBJECTIVES: To quantify lung inhomogeneities in patients with acute respiratory distress syndrome (ARDS). METHODS: Retrospective quantitative analysis of CT scan images of 148 patients with ARDS and 100 control subjects. An ideally homogeneous lung would have the same expansion in all regions; lung expansion was measured by CT scan as gas/tissue ratio and lung inhomogeneities were measured as lung regions with lower gas/tissue ratio than their neighboring lung regions. We defined as the extent of lung inhomogeneities the fraction of the lung showing an inflation ratio greater than 95th percentile of the control group (1.61). MEASUREMENTS AND MAIN RESULTS: The extent of lung inhomogeneities increased with the severity of ARDS (14 ± 5, 18 ± 8, and 23 ± 10% of lung volume in mild, moderate, and severe ARDS; P < 0.001) and correlated with the physiologic dead space (r(2) = 0.34; P < 0.0001). The application of positive end-expiratory pressure reduced the extent of lung inhomogeneities from 18 ± 8 to 12 ± 7% (P < 0.0001) going from 5 to 45 cm H2O airway pressure. Lung inhomogeneities were greater in nonsurvivor patients than in survivor patients (20 ± 9 vs. 17 ± 7% of lung volume; P = 0.01) and were the only CT scan variable independently associated with mortality at backward logistic regression. CONCLUSIONS: Lung inhomogeneities are associated with overall disease severity and mortality. Increasing the airway pressures decreased but did not abolish the extent of lung inhomogeneities.

Limits of normality of quantitative thoracic CT analysis.

INTRODUCTION: Although computed tomography (CT) is widely used to investigate different pathologies, quantitative data from normal populations are scarce. Reference values may be useful to estimate the anatomical or physiological changes induced by various diseases. METHODS: We analyzed 100 helical CT scans taken for clinical purposes and referred as nonpathological by the radiologist. Profiles were manually outlined on each CT scan slice and each voxel was classified according to its gas/tissue ratio. For regional analysis, the lungs were divided into 10 sterno-vertebral levels. RESULTS: We studied 53 males and 47 females (age 64 ± 13 years); males had a greater total lung volume, lung gas volume and lung tissue. Noninflated tissue averaged 7 ± 4% of the total lung weight, poorly inflated tissue averaged 18 ± 3%, normally inflated tissue averaged 65 ± 8% and overinflated tissue averaged 11 ± 7%. We found a significant correlation between lung weight and subject's height (P <0.0001, r2 = 0.49); the total lung capacity in a supine position was 4,066 ± 1,190 ml, ~1,800 ml less than the predicted total lung capacity in a sitting position. Superimposed pressure averaged 2.6 ± 0.5 cmH2O. CONCLUSION: Subjects without lung disease present significant amounts of poorly inflated and overinflated tissue. Normal lung weight can be predicted from patient's height with reasonable confidence.