RESUMEN
The structures of metal oxide surfaces and inherent defects are vital for a variety of applications in materials science and chemistry. While scanning probe microscopy can reveal atomic-scale details, elemental discrimination usually requires indirect assumptions and extensive theoretical modeling. Here, atomic force microscopy with O-terminated copper tips on a variety of sample systems demonstrates not only a clear and universal chemical contrast but also immediate access to the atomic configuration of defects. The chemically selective contrast is explained by purely electrostatic interactions between the negatively charged tip-apex and the strongly varying electrostatic potential of metal and oxygen sites. These results offer a standardized methodology for the direct characterization of even the most complex metal oxide surfaces, providing fundamental insight into atomic-scale processes in these material systems.
RESUMEN
The escalating presence of per- and polyfluoroalkyl substances (PFAS) in drinking water poses urgent public health concerns, necessitating effective removal. This study presents a groundbreaking approach, using viologen to synthesize covalent organic framework nanospheres: MELEM-COF and MEL-COF. Characterized by highly crystalline features, these nanospheres exhibit exceptional affinity for diverse anionic PFAS compounds, achieving simultaneous removal of multiple contaminants within 30 min. Investigating six anionic PFAS compounds, MEL- and MELEM-COFs achieved 90.0-99.0% removal efficiency. The integrated analysis unveils the synergistic contributions of COF morphology and functional properties to PFAS adsorption. Notably, MELEM-COF, with cationic surfaces, exploits electrostatic and dipole interactions, with a 2500 mg g-1 adsorption capacity-surpassing all reported COFs to date. MELEM-COF exhibits rapid exchange kinetics, reaching equilibrium within 30 min. These findings deepen the understanding of COF materials and promise avenues for refining COF-based adsorption strategies.
RESUMEN
Woven covalent organic frameworks (COF) possess three dimensional frameworks with spatially isolated Cu(I) centers and have promising optoelectronic properties because of metal to ligand charge transfer (MLCT). However, despite their potential, woven COFs have not yet been investigated as photocatalysts. In this study, we developed a new woven COF, Cu-PhenBDA-COF, functionalized with diacetylene bonds. Cu-PhenBDA-COF was fully characterized, and the optoelectronic and photocatalytic properties were compared to previously reported Cu-COF-505. The diacetylene bonds of the linker positively impacted the optoelectronic properties of Cu-PhenBDA-COF and resulted in a narrower band gap and better charge separation efficiency. When the Cu(I) center was removed from both woven COFs, the absorption edge was blue shifted, resulting in a wider band gap, and there was a considerable decrease in the charge separation efficiency, underscoring the pivotal role of MLCT. This trend was reflected in the photocatalytic activity of the woven COFs toward the degradation of sulfamethoxazole in water, where the highest reaction rate constant (k app ) was recorded for the metallated diacetylene functionalized woven COF, Cu-PhenBDA-COF.
RESUMEN
The high degree of corrosivity and reactivity of bromine, which is released from various sources, poses a serious threat to the environment. Moreover, its coexistence with iodine forming an equilibrium compound, iodine monobromide (IBr) necessitates the selective capture of bromine from halogen mixtures. The electrophilicity of halogens to π-electron rich structures enabled us to strategically design a covalent organic framework for halogen capture, featuring a defined pore environment with localized sorption sites. The higher capture capacity of bromine (4.6â g g-1) over iodine by ~41 % shows its potential in selective capture. Spectroscopic results uncovering the preferential interaction sites are supported by theoretical investigations. The alkyne bridge is a core functionality promoting the selectivity in capture by synergistic physisorption, rationalized by the higher orbital overlap of bromine due to its smaller atomic size as well as reversible chemical interactions. The slip stacking in the structure has further promoted this phenomenon by creating clusters of molecular interaction sites with bromine intercalated between the layers. The inclusion of unsaturated moieties, i.e. triple bonds and the complementary pore geometry offer a promising design strategy for the construction of porous materials for halogen capture.
RESUMEN
The strongly electron-donating N-heterocyclic imines (NHIs) have been employed as excellent surface anchors for the thermodynamic stabilization of electron-deficient species due to their enhanced nucleophilicity. However, the binding mode and interfacial property of these new ligands are still unclear, representing a bottleneck for advanced applications in surface functionalization and catalysis. Here, NHIs with different side groups have been rationally designed, synthesized, and analyzed on various metal surfaces (Cu, Ag). Our results reveal different binding modes depending on the molecular structure and metal surface. The molecular design enables us to achieve a flat-lying or upright configuration and even a transition between these two binding modes depending on the coverage and time. Importantly, the two binding modes exhibit different degrees of interfacial charge transfer between the molecule and the surface. This study provides essential microscopic insight into the NHI adsorption geometry and interfacial charge transfer for the optimization of heterogeneous catalysts in coordination chemistry.
RESUMEN
Solid phase adsorbents with high removal affinity for per- and polyfluoroalkyl substances (PFAS) in aqueous environments are sought. We report the synthesis and investigation of COF-I, a new covalent organic framework (COF) with a good affinity for PFAS adsorption. COF-I was synthesized by the condensation reaction between 2,4,6-trimethyl-1,3,5-triazine and 2,3-dimethoxyterephthaldehyde and fully characterized. In addition to the high crystallinity and surface area, COF-I showed high hydrolytic and thermal stability. Further, we converted its hydrophobic surface to a hydrophilic surface by converting the ortho-methoxy groups to hydroxyl derivatives and produced a new hydrophilic olefin-linked two-dimensional (2D) COF. We experimentally measured the crystallinity of both COFs by X-ray diffraction and used atomistic simulations coupled with cross-polarization/magic angle spinning solid-state nuclear magnetic resonance (CP/MAS ssNMR) to determine the relative amounts of AA-stacking and AB-stacking present. COF-I, with its hydrophobic surface and methoxy groups in the ortho positions, showed the best PFAS adsorption. COF-I reduced the concentration of perfluorooctanoic acid from 20 to 0.069 µg L-1 and to 0.052 µg L-1 for perfluorooctanesulfonic acid. These amounts are lower than the U.S. Environmental Protection Agency advisory level (0.070 µg L-1). High efficiency, fast kinetic adsorption, and reusability of COF-I are advantages of COF-I for PFAS removal from water.
RESUMEN
Despite the substantial success of N-heterocyclic carbenes (NHCs) as stable and versatile surface modification ligands, their use in nanoscale applications beyond chemistry is still hampered by the failure to control the carbene binding mode, which complicates the fabrication of monolayers with the desired physicochemical properties. Here, we applied vibrational sum-frequency generation spectroscopy to conduct a pseudokinetic surface analysis of NHC monolayers on Au thin films under ambient conditions. We observe for two frequently used carbene structures that their binding mode is highly dynamic and changes with the adsorption time. In addition, we demonstrate that this transition can be accelerated or decelerated to adjust the binding mode of NHCs, which allows fabrication of tailored monolayers of NHCs simply by kinetic control.
RESUMEN
Molecular switches which can be triggered by light to interconvert between two or more well-defined conformation differing in their chemical or physical properties are fundamental for the development of materials with on-demand functionalities. Recently, a novel molecular switch based on a the azodicarboxamide core has been reported. It exhibits a volume-conserving conformational change upon excitation, making it a promising candidate for embedding in confined environments. In order to rationally implement and efficiently utilize the azodicarboxamide molecular switch, detailed insight into the coordinates governing the excited-state dynamics is needed. Here, we report a detailed comparative picture of the molecular motion at the atomic level in the presence and absence of explicit solvent. Our hybrid quantum mechanics/molecular mechanics (QM/MM) excited state simulations reveal that, although the energy landscape is slightly modulated by the solvation, the light-induced motion is dominated by a bending-assisted pedalo-type motion independent of the solvation. To support the predicted mechanism, we simulate time-resolved IR spectroscopy from first principles, thereby resolving fingerprints of the light-induced switching process. Our calculated time-resolved data are in good agreement with previously reported measured spectra.
RESUMEN
The rare earth-rich intermetallic phases RE2RuIn with RE = Sc, Y, Dy-Tm and Lu were synthesized by reactions of the elements in sealed tantalum ampoules in an induction furnace. The samples were characterized through Guinier powder patterns and the structures of Sc2RuIn and Er2RuIn were refined from single crystal X-ray diffraction data. The indides crystallize with the Pt2ZnCd type space group P4/mmm. The RE2RuIn phases are superstructures of the bcc packing and can be explained as intergrowth variants of tetragonally distorted, CsCl derived slabs of compositions RERu and REIn. Chemical bonding is discussed for Sc2RuIn and Sc2RuMg in comparison with the binaries ScRu, ScMg and ScIn. The Ru/Mg respectively Ru/In ordering leads to an increase of Sc-Sc bonding for the slab with the shorter Sc-Sc distances, while the Sc-Ru bond strength values remain similar. The strongest bonding interactions occur within the magnesium and indium square nets. Magnetic susceptibility measurements reveal Pauli paramagnetism for Lu2RuIn while Dy2RuIn, Ho2RuIn, Er2RuIn and Tm2RuIn are Curie-Weiss paramagnets. Antiferromagnetic ordering occurs at 13.1, 5.3 and 2.9 K for Dy2RuIn, Er2RuIn and Tm2RuIn, respectively. Dy2RuIn and Er2RuIn show metamagnetic transitions at critical fields of 4.6 and 3.2 T.
RESUMEN
Molecular machines enable external control of structural and dynamic phenomena at the atomic level. To efficiently transfer their tunable properties into designated functionalities, a detailed understanding of the impact of molecular embedding is needed. In particular, a comprehensive insight is fundamental to design hierarchical multifunctional systems that are inspired by biological cells. Here, we applied an on-the-fly trained force field to perform atomistic simulations of a systematically modified rotaxane functionalized metal-organic framework. Our atomistic studies reveal a symmetric and asymmetric interplay of the mechanically bonded rings (MBRs) within the framework depending on the local environment. As a result, their translational motion is modulated ranging from fast oscillatory behavior to cooperative and potentially directed shuttling. The derived picture of competitive interactions, which influence the operation mechanism of the MBRs embedded in these soft porous materials, promotes the development of responsive functional materials, which is a key step toward intelligent matter.
RESUMEN
Mechanically interlocked molecules have gained significant attention because of their unique ability to perform well-defined motions originating from their entanglement, which is important for the design of artificial molecular machines. Atomistic simulations based on force fields (FFs) provide detailed insights into such architectures at the molecular level enabling one to predict the resulting functionalities. However, the development of reliable FFs is still challenging and time-consuming, in particular for highly dynamic and interlocked structures such as rotaxanes, which exhibit a large number of different conformers. In the present work, we present an on-the-fly training (OTFT) algorithm. By a guided and nonguided phase space sampling, relevant reference data are automatically and continuously generated and included for the on-the-fly parametrization of the FF based on a population swapping genetic algorithm (psGA). The OTFT approach provides a fast and automated FF parametrization scheme and tackles problems caused by missing phase space information or the need for big data. We demonstrate the high accuracy of the developed FF for flexible molecules with respect to equilibrium and out-of-equilibrium properties. Finally, by applying the ab initio parametrized FF, molecular dynamic simulations were performed up to experimentally relevant time scales (ca. 1 µs) enabling capture in detail of the structural evaluation and mapping out of the free-energy topology. The on-the-fly training approach thus provides a strong foundation toward automated FF developments and large-scale investigations of phenomena in and out of thermal equilibrium.
RESUMEN
Controlling the identity of the tip-terminating atom or molecule in low-temperature atomic force microscopy has led to ground breaking progress in surface chemistry and nanotechnology. Lacking a comparative tip-performance assessment, a profound standardization in such experiments is highly desirable. Here we directly compare the imaging and force-spectroscopy capabilities of four atomically defined tips, namely Cu-, Xe-, CO-, and O-terminated Cu-tips (CuOx-tips). Using a nanostructured copper-oxide surface as benchmark system, we found that Cu-tips react with surface oxygen, while chemically inert Xe- and CO-tips allow entering the repulsive force regime enabling increased resolution. However, their high flexibility leads to imaging artifacts and their strong passivation suppresses the chemical contrast. The higher rigidity and selectively increased chemical reactivity of CuOx-tips prevent tip-bending artifacts and generate a distinct chemical contrast. This result is particularly promising in view of future studies on other metal-oxide surfaces.
RESUMEN
Providing fundamental insights in atomic interactions, dedicated methods in atomic force microscopy allow measuring the threshold forces needed to move single adsorbed atoms or molecules. However, the chemical and structural properties of the probe-tip can drastically influence the results. Establishing atomically defined contacts in such experiments, the tips in the present study are functionalized with various chemically and structurally different terminations. Xenon atoms are moved along an atomically defined metal/metal-oxide boundary where all tips show a pulling mechanism and slight force variations, which are assigned to polarization effects within the tip-sample junction. Detaching Xe atoms from the boundary involves a significantly higher energy barrier where chemical reactive Cu-tips cause Xe pickup before any lateral manipulation. Passivating the tip by inert probe particles (Xe or CO) allows further approaching the surface Xe atom. Yet, the small vertical attraction and pronounced tip relaxations prevent reaching sufficient threshold forces inducing manipulation. In contrast, the high structural rigidity of oxygen-terminated Cu-tips allows manipulations even beyond the threshold where they evolve from initial pulling, via sliding to pushing mode. The detailed quantitative analysis of the processes in the atomically defined junctions emphasizes the mechanical and chemical interactions for highly controlled experiments with piconewton sensitivity.
Asunto(s)
Oxígeno , Microscopía de Fuerza AtómicaRESUMEN
Remotely controlling macroscopic movement is one of the key elements to realize intelligent materials for applications ranging from sensing to robotics. Over the last few years, a number of photomechanical materials based on diarylethene derivatives have been developed. However, a detailed picture of the structural evolution within these soft actuators is often missing. In this work, an atomistic investigation uncovers how the photo-induced molecular dynamics propagates to large-scale motion and results in macroscopic deformation of the crystal. By correlating the intramolecular rearrangement within the photo-responsive switching unit with the intermolecular packing, the molecular mechanism for the photomechanical phenomena is deciphered, which is fundamental for a rational development of photo-responsive actuators.
RESUMEN
Photo-responsive molecular motors incorporated in soft porous materials enable the amplification of the motion of individual motor units by employing their collective and cooperative behavior. Metal-organic frameworks (MOFs) provide in this regard, due to their structural diversity and modular assembly, a unique matrix to construct well-defined and systematically tunable molecular environments for the embedding of molecular motors. However, despite advances in the development of such photo-responsive functional materials, a thorough understanding of the governing interactions at the atomic scale has been missing so far, limiting the possibility of predicting and fully exploring the potential of these assembled machineries. Here, we present a conformational study to unravel the collective structural behavior and elucidate the impact of motor-motor interactions on the local and global properties of the scaffold. In particular, our work highlights the impact of full conversion of the embedded molecular motors on the overall network topology of the MotorMOF and thus acts as a benchmark for future studies to further explore the correlation of responsive building units with the resulting functionality of these hierarchical systems.
RESUMEN
Molecular spatial conformational evolution following the corresponding chemical reaction pathway at surfaces is important to understand and optimize chemical processes. Combining experimental and theoretical methods, the sequential N-H and C-H dehydrogenation of pyromellitic diimide (PMDI) on a Cu(111) surface are reported. STM experiments and atomistic modeling allow structural analysis at each well-defined reaction step. First, exclusively the aromatic N-H dehydrogenation of the imide group is observed. Subsequently, the C-H group at the benzene core of PMDI gets activated leading to a dehydrogenation reaction forming metalorganic species where Cu adatoms pronouncedly protruding from the surface are coordinated by one or two PMDI ligands at the surface. All reactions of PMDI induce conformational changes at the surface as confirmed by STM imaging and DFT simulations. Such conformational evolution in sequential N-H and C-H activation provides a detailed insight to understand molecular dehydrogenation processes at surfaces.
RESUMEN
Amplified spontaneous emission (ASE) is intrinsically associated with lasing applications. Inefficient photon energy transfer to ASE is a long-standing issue for organic semiconductors that consist of multiple competing radiative decay pathways, far from being rationally regulated from the perspective of molecular arrangements. Herein, we achieve controllable molecular packing motifs by halogen-bonded cocrystallization, leading to ten times increased radiative decay rate, four times larger ASE radiative decay selectivity and thus remarkable ASE threshold decrease from 223 to 22â µJ cm-2 , albeit with a low photoluminescence quantum yield. We have made an in-depth investigation on the relationship among molecular arrangements, vibration modes, radiative decay profiles and ASE properties. The results suggest that cocrystallization presents a powerful approach to tailor the radiative decay pathways, which is fundamentally important to the development of organic ASE and lasing materials.
RESUMEN
The formation of azo compounds via redox cross-coupling of nitroarenes and arylamines, challenging in solution phase chemistry, is achieved by on-surface chemistry. Reaction products are analyzed with a cryogenic scanning tunneling microscope (STM) and X-ray photoelectron spectroscopy (XPS). By using well-designed precursors containing both an amino and a nitro functionality, azo polymers are prepared on surface via highly efficient nitro-amino cross-coupling. Experiments conducted on other substrates and surface orientations reveal that the metal surface has a significant effect on the reaction efficiency. The reaction was further found to proceed from partially oxidized/reduced precursors in dimerization reactions, shedding light on the mechanism that was studied by DFT calculations.
RESUMEN
In response to external stimuli, molecular motors enable to control phenomena at the molecular scale with high precision. In order to utilize their unique properties and to gain designated functionalities, their molecular embedding is important. Despite the great progress in the development of corresponding functional materials, a detailed picture of how the structural and dynamic properties of these responsive molecular units are transferred to a macroscopic outcome is so-far missing. Here, we provide an atomistic insight into the solvation dynamics around a light-driven molecular motor. By performing molecular dynamic simulations based on an ab initio parametrized and validated force field, we elucidate in detail the intermolecular interactions depending on the state of the motor. Detailed analysis of the solvation shells revealed the impact on both the location of the primary interaction sites and the orientation of the solvent molecules with respect to the molecular motor. Furthermore, we studied the influence of structural modifications of the molecular motor on its local environment. By investigating the motor-solvent interaction, our results provide a strong foundation to decipher the ability of molecular machines to specifically alter molecular processes, which is fundamental to predict and tailor the resulting macroscopic functionality.