RESUMEN
Voids-the nothingness-broadly exist within nanomaterials and impact properties ranging from catalysis to mechanical response. However, understanding nanovoids is challenging due to lack of imaging methods with the needed penetration depth and spatial resolution. Here, we integrate electron tomography, morphometry, graph theory and coarse-grained molecular dynamics simulation to study the formation of interconnected nanovoids in polymer films and their impacts on permeance and nanomechanical behaviour. Using polyamide membranes for molecular separation as a representative system, three-dimensional electron tomography at nanometre resolution reveals nanovoid formation from coalescence of oligomers, supported by coarse-grained molecular dynamics simulations. Void analysis provides otherwise inaccessible inputs for accurate fittings of methanol permeance for polyamide membranes. Three-dimensional structural graphs accounting for the tortuous nanovoids within, measure higher apparent moduli with polyamide membranes of higher graph rigidity. Our study elucidates the significance of nanovoids beyond the nothingness, impacting the synthesisâmorphologyâfunction relationships of complex nanomaterials.
RESUMEN
This study investigates the effects of interparticle interactions and wettability on the particle attachment efficacy to the oilâwater interface. Three types of PS particles with different surface functional groups were examined at varying salt concentrations and the number of particles injected into the interface. Based on the microfluidic method and the surface coverage measurement, we found that the two contributing factors significantly influenced particle attachment efficiency to the interface, while the wettability factor has a major contribution. This research contributes to the understanding of physicochemical aspects of particle assembly at fluid interfaces and can offer strategies for forming tailored structures with desired interfacial properties.
RESUMEN
Fast humidity sensors are of interest due to their potential application in new sensing technologies such as wearable personal healthcare and environment sensing devices. However, the realization of rapid response/recovery humidity sensors remains challenging primarily due to the sluggish adsorption/desorption of water molecules, which particularly impacts the response/recovery times. Moreover, another key factor for fast humidity sensing, namely the attainment of equal response and recovery times, has often been neglected. Herein, the layer-by-layer (LbL) assembly of a reduced graphene oxide (rGO)/polyelectrolyte is demonstrated for application in fast humidity sensors. The resulting sensors exhibit fast response and recovery times of 0.75 and 0.85 s (corresponding to times per RH range of 0.24 and 0.27 s RH-1, respectively), providing a difference of only 0.1 s (corresponding to 0.03 s RH-1). This performance exceeds that of the majority of previously reported graphene oxide (GO)- or rGO-based humidity sensors. In addition, the polyelectrolyte deposition time is shown to be key to controlling the humidity sensing kinetics. The as-developed rapid sensing system is expected to provide useful guidance for the tailorable design of fast humidity sensors.
RESUMEN
Electrochemical phase transformation in ion-insertion crystalline electrodes is accompanied by compositional and structural changes, including the microstructural development of oriented phase domains. Previous studies have identified prevailingly transformation heterogeneities associated with diffusion- or reaction-limited mechanisms. In comparison, transformation-induced domains and their microstructure resulting from the loss of symmetry elements remain unexplored, despite their general importance in alloys and ceramics. Here, we map the formation of oriented phase domains and the development of strain gradient quantitatively during the electrochemical ion-insertion process. A collocated four-dimensional scanning transmission electron microscopy and electron energy loss spectroscopy approach, coupled with data mining, enables the study. Results show that in our model system of cubic spinel MnO2 nanoparticles their phase transformation upon Mg2+ insertion leads to the formation of domains of similar chemical identity but different orientations at nanometre length scale, following the nucleation, growth and coalescence process. Electrolytes have a substantial impact on the transformation microstructure ('island' versus 'archipelago'). Further, large strain gradients build up from the development of phase domains across their boundaries with high impact on the chemical diffusion coefficient by a factor of ten or more. Our findings thus provide critical insights into the microstructure formation mechanism and its impact on the ion-insertion process, suggesting new rules of transformation structure control for energy storage materials.
RESUMEN
Synthesizing patchy particles with predictive control over patch size, shape, placement and number has been highly sought-after for nanoparticle assembly research, but is fraught with challenges. Here we show that polymers can be designed to selectively adsorb onto nanoparticle surfaces already partially coated by other chains to drive the formation of patchy nanoparticles with broken symmetry. In our model system of triangular gold nanoparticles and polystyrene-b-polyacrylic acid patch, single- and double-patch nanoparticles are produced at high yield. These asymmetric single-patch nanoparticles are shown to assemble into self-limited patchâpatch connected bowties exhibiting intriguing plasmonic properties. To unveil the mechanism of symmetry-breaking patch formation, we develop a theory that accurately predicts our experimental observations at all scales-from patch patterning on nanoparticles, to the size/shape of the patches, to the particle assemblies driven by patchâpatch interactions. Both the experimental strategy and theoretical prediction extend to nanoparticles of other shapes such as octahedra and bipyramids. Our work provides an approach to leverage polymer interactions with nanoscale curved surfaces for asymmetric grafting in nanomaterials engineering.
RESUMEN
Nanoscale morphology of functional materials determines their chemical and physical properties. However, despite increasing use of transmission electron microscopy (TEM) to directly image nanomorphology, it remains challenging to quantify the information embedded in TEM data sets, and to use nanomorphology to link synthesis and processing conditions to properties. We develop an automated, descriptor-free analysis workflow for TEM data that utilizes convolutional neural networks and unsupervised learning to quantify and classify nanomorphology, and thereby reveal synthesis-nanomorphology relationships in three different systems. While TEM records nanomorphology readily in two-dimensional (2D) images or three-dimensional (3D) tomograms, we advance the analysis of these images by identifying and applying a universal shape fingerprint function to characterize nanomorphology. After dimensionality reduction through principal component analysis, this function then serves as the input for morphology grouping through unsupervised learning. We demonstrate the wide applicability of our workflow to both 2D and 3D TEM data sets, and to both inorganic and organic nanomaterials, including tetrahedral gold nanoparticles mixed with irregularly shaped impurities, hybrid polymer-patched gold nanoprisms, and polyamide membranes with irregular and heterogeneous 3D crumple structures. In each of these systems, unsupervised nanomorphology grouping identifies both the diversity and the similarity of the nanomaterial across different synthesis conditions, revealing how synthetic parameters guide nanomorphology development. Our work opens possibilities for enhancing synthesis of nanomaterials through artificial intelligence and for understanding and controlling complex nanomorphology, both for 2D systems and in the far less explored case of 3D structures, such as those with embedded voids or hidden interfaces.
RESUMEN
Creation of new two-dimensional (2D) architectures has attracted significant attention in the field of self-assembly for structural diversity and new functionalization. Although numerous 2D polymer nanosheets have been reported, 2D nanosheets with tubular channels have been unexplored. Herein, we describe a new strategy for the fabrication of stimulus-responsive conjugated polymer 2D nanosheets with hollow cavities. Amphiphilic macrocyclic diacetylenes self-assembled in an aqueous solution in a columnar manner to afford bilayered 2D nanosheets with intrinsically tubular nanochannels. UV-induced polymerization resulted in the generation of blue-colored tubular conjugated polydiacetylene 2D nanosheets. Immobilization of gold nanoparticles, fluorescence labeling with FRET phenomenon and colorimetric DNA sensing were demonstrated with these new 2D nanosheets. In addition, the free NH2 containing polymerized 2D nanosheet was utilized for conductivity behavior and grafting on graphene oxide (GO).
Asunto(s)
Nanopartículas del Metal , Polímeros de Estímulo Receptivo , Oro , Polímeros/química , ColorimetríaRESUMEN
Intimately connected to the rule of life, chirality remains a long-time fascination in biology, chemistry, physics and materials science. Chiral structures, e.g., nucleic acid and cholesteric phase developed from chiral molecules are common in nature and synthetic soft materials. While it was recently discovered that achiral but bent-core mesogens can also form chiral helices, the assembly of chiral microstructures from achiral polymers has rarely been explored. Here, we reveal chiral emergence from achiral conjugated polymers, in which hierarchical helical structures are developed through a multistep assembly pathway. Upon increasing concentration beyond a threshold volume fraction, dispersed polymer nanofibers form lyotropic liquid crystalline (LC) mesophases with complex, chiral morphologies. Combining imaging, X-ray and spectroscopy techniques with molecular simulations, we demonstrate that this structural evolution arises from torsional polymer molecules which induce multiscale helical assembly, progressing from nano- to micron scale helical structures as the solution concentration increases. This study unveils a previously unknown complex state of matter for conjugated polymers that can pave way to a field of chiral (opto)electronics. We anticipate that hierarchical chiral helical structures can profoundly impact how conjugated polymers interact with light, transport charges, and transduce signals from biomolecular interactions and even give rise to properties unimagined before.
Asunto(s)
Cristales Líquidos , Polímeros , Cristales Líquidos/química , Polímeros/química , EstereoisomerismoRESUMEN
Biological morphogenesis has inspired many efficient strategies to diversify material structure and functionality using a fixed set of components. However, implementation of morphogenesis concepts to design soft nanomaterials is underexplored. Here, we study nanomorphogenesis in the form of the three-dimensional (3D) crumpling of polyamide membranes used for commercial molecular separation, through an unprecedented integration of electron tomography, reaction-diffusion theory, machine learning (ML), and liquid-phase atomic force microscopy. 3D tomograms show that the spatial arrangement of crumples scales with monomer concentrations in a form quantitatively consistent with a Turing instability. Membrane microenvironments quantified from the nanomorphologies of crumples are combined with the Spiegler-Kedem model to accurately predict methanol permeance. ML classifies vastly heterogeneous crumples into just four morphology groups, exhibiting distinct mechanical properties. Our work forges quantitative links between synthesis and performance in polymer thin films, which can be applicable to diverse soft nanomaterials.
RESUMEN
MXenes, 2D nanomaterials derived from ceramic MAX phases, have drawn considerable interest in a wide variety of fields including energy storage, catalysis, and sensing. There are many possible MXene compositions due to the chemical and structural diversity of parent MAX phases, which can bear different possible metal atoms "M", number of layers, and carbon or nitrogen "X" constituents. Despite the potential variety in MXene types, the bulk of MXene research focuses upon the first MXene discovered, Ti3C2T. With the recent discovery of polymer/MXene multilayer assemblies as thin films and coatings, there is a need to broaden the accessible types of multilayers by including MXenes other than Ti3C2Tz; however, it is not clear how altering the MXene type influences the resulting multilayer growth and properties. Here, we report on the first use of MXenes other than Ti3C2Tz, specifically Ti2CTz and Nb2CTz, for the layer-by-layer (LbL) assembly of polycation/MXene multilayers. By comparing these MXenes, we evaluate both how changing M (Ti vs Nb) and "n" (Ti3C2Tzvs Ti2CTz) affect the growth and properties of the resulting multilayer. Specifically, the aqueous LbL assembly of each MXene with poly(diallyldimethylammonium) into films and coatings is examined. Further, we compare the oxidative stability, optoelectronic properties (refractive index, absorption coefficient, optical conductivity, and direct and indirect optical band gaps), and the radio frequency heating response of each multilayer. We observe that MXene multilayers with higher "n" are more electrically conductive and oxidatively stable. We also demonstrate that Nb2CTz containing films have lower optical band gaps and refractive indices at the cost of lower electrical conductivities as compared to their Ti2CTz counterparts. Our work demonstrates that the properties of MXene/polycation multilayers are highly dependent on the choice of constituent MXene and that the MXene type can be altered to suit specific applications.
RESUMEN
Development of the surface morphology and shape of crystalline nanostructures governs the functionality of various materials, ranging from phonon transport to biocompatibility. However, the kinetic pathways, following which such development occurs, have been largely unexplored due to the lack of real-space imaging at single particle resolution. Here, we use colloidal nanoparticles assembling into supracrystals as a model system, and pinpoint the key role of surface fluctuation in shaping supracrystals. Utilizing liquid-phase transmission electron microscopy, we map the spatiotemporal surface profiles of supracrystals, which follow a capillary wave theory. Based on this theory, we measure otherwise elusive interfacial properties such as interfacial stiffness and mobility, the former of which demonstrates a remarkable dependence on the exposed facet of the supracrystal. The facet of lower surface energy is favored, consistent with the Wulff construction rule. Our imaging-analysis framework can be applicable to other phenomena, such as electrodeposition, nucleation, and membrane deformation.
RESUMEN
The assembly of proteins into amyloid fibrils has become linked not only with the progression of myriad human diseases, but also important biological functions. Understanding and controlling the formation, structure, and stability of amyloid fibrils is therefore a major scientific goal. Here we utilize electron microscopy-based approaches combined with quantitative statistical analysis to show how recently developed kind of amyloid modulators-multivalent polymer-peptide conjugates (mPPCs)-can be applied to control the structure and stability of amyloid fibrils. In doing so, we demonstrate that mPPCs are able to convert 40-residue amyloid beta fibrils into ordered nanostructures through a combination of fragmentation and bundling. Fragmentation is shown to be consistent with a model where the rate constant of fibril breakage is independent of the fibril length, suggesting a local and specific interaction between fibrils and mPPCs. Subsequent bundling, which was previously not observed, leads to the formation of sheet-like nanostructures which are surprisingly much more uniform than the starting fibrils. These nanostructures have dimensions independent of the molecular weight of the mPPC and retain the molecular-level ordering of the starting amyloid fibrils. Collectively, we reveal quantitative and nanoscopic understanding of how mPPCs can be applied to control amyloid structure and stability, and demonstrate approaches to elucidate nanoscale amyloid phase behavior in the presence of functional macromolecules and other modulators.
RESUMEN
An emergent theme in mono- and multivalent ion batteries is to utilize nanoparticles (NPs) as electrode materials based on the phenomenological observations that their short ion diffusion length and large electrode-electrolyte interface can lead to improved ion insertion kinetics compared to their bulk counterparts. However, the understanding of how the NP size fundamentally relates to their electrochemical behaviors (e.g., charge storage mechanism, phase transition associated with ion insertion) is still primitive. Here, we employ spinel λ-MnO2 particles as a model cathode material, which have effective Mg2+ ion intercalation but with their size effect poorly understood to investigate their operating mechanism via a suite of electrochemical and structural characterizations. We prepare two differently sized samples, the small nanoscopic λ-MnO2 particles (81 ± 25 nm) and big micron-sized ones (814 ± 207 nm) via postsynthesis size-selection. Analysis of the charge storage mechanisms shows that the stored charge from Mg2+ ion intercalation dominates in both systems and is â¼10 times higher in small particles than that in the big ones. From both X-ray diffraction and atomic-resolution scanning transmission electron microscopy imaging, we reveal a fundamental difference in phase transition of the differently sized particles during Mg2+ ion intercalation: the small NPs undergo a solid-solution-like phase transition which minimizes lattice mismatch and energy penalty for accommodating new phases, whereas the big particles follow conventional multiphase transformation. We show that this pathway difference is related to the improved electrochemical performance (e.g., rate capability, cycling performance) of small particles over the big ones which provides important insights in encoding within the particle dimension, that is, the single-phase transition pathway in high-performance electrode materials for multivalent ion batteries.
RESUMEN
Polymeric binders serve to stabilize the morphology of electrodes by providing adhesion and binding between the various components. Successful binders must serve multiple functions simultaneously, including providing strong adhesion, improving conductivity, and providing electrochemical stability. A tradeoff between mechanical integrity and electrochemical performance in binders for lithium-ion batteries is one of the many challenges of improving capacity and performance. In this paper, we demonstrate a self-doped conjugated polymer, poly(9,9-bis(4'-sulfonatobutyl)fluorene-alt-co-1,4-phenylene) (PFP), which not only provides mechanical robustness but also improves electrode stability at temperatures as high as 450 °C. The self-doped PFP polymer is comprised of a conjugated polyfluorene backbone with sulfonate terminated side-chains that serve to dope the conjugated polymer backbone, resulting in stable conductivity. Composite electrodes are prepared by blending PFP with V2O5 in water, followed by casting and drying. Structural characterization with X-ray diffraction and wide-angle X-ray scattering shows that PFP suppresses the crystallization of V2O5 at high temperatures (up to 450 °C), resulting in improved electrode stability during cycling and improved rate performance. This study demonstrates the potential of self-doped conjugated polymers for use as polymeric binders to enhance mechanical, structural, and electrochemical properties.
RESUMEN
An understanding of how complex nanoscale morphologies emerge from synthesis would offer powerful strategies to construct soft materials with designed structures and functions. However, these kinds of morphologies have proven difficult to characterize, and therefore manipulate, because they are three-dimensional (3D), nanoscopic, and often highly irregular. Here, we studied polyamide (PA) membranes used in wastewater reclamation as a prime example of this challenge. Using electron tomography and quantitative morphometry, we reconstructed the nanoscale morphology of 3D crumples and voids in PA membranes for the first time. Various parameters governing film transport properties, such as surface-to-volume ratio and mass-per-area, were measured directly from the reconstructed membrane structure. In addition, we extracted information inaccessible by other means. For example, 3D reconstruction shows that membrane nanostructures are formed from PA layers 15-20 nm thick folding into 3D crumples which envelope up to 30% void by volume. Mapping local curvature and thickness in 3D quantitatively groups these crumples into three classes, "domes", "dimples", and "clusters", each being a distinct type of microenvironment. Elemental mapping of metal ion adsorption across the film demonstrates that these previously missed parameters are relevant to membrane performance. This imaging-morphometry platform can be applicable to other nanoscale soft materials and potentially suggests engineering strategies based directly on synthesis-morphology-function relationships.
RESUMEN
Stretchable, bendable, and foldable conductive coatings are crucial for wearable electronics and biometric sensors. These coatings should maintain functionality while simultaneously interfacing with different types of surfaces undergoing mechanical deformation. MXene sheets as conductive two-dimensional nanomaterials are promising for this purpose, but it is still extremely difficult to form surface-agnostic MXene coatings that can withstand extreme mechanical deformation. We report on conductive and conformal MXene multilayer coatings that can undergo large-scale mechanical deformation while maintaining a conductivity as high as 2000 S/m. MXene multilayers are successfully deposited onto flexible polymer sheets, stretchable poly(dimethylsiloxane), nylon fiber, glass, and silicon. The coating shows a recoverable resistance response to bending (up to 2.5-mm bending radius) and stretching (up to 40% tensile strain), which was leveraged for detecting human motion and topographical scanning. We anticipate that this discovery will allow for the implementation of MXene-based coatings onto mechanically deformable objects.
RESUMEN
Crystalline vanadium pentoxide (V2O5) has attracted significant interest as a potential cathode material for energy storage applications due to its high theoretical capacity. Unfortunately, the material suffers from low conductivity as well as slow lithium ion diffusion, both of which affect how fast the electrode can be charged/discharged and how many times it can be cycled. Colloidal crystal templating (CCT) provides a simple approach to create well-organized 3-D nanostructures of materials, resulting in a significant increase in surface area that can lead to marked improvements in electrochemical performance. Here, a single layer of open shell V2O5 architectures ca. 1 µm in height with ca. 100 nm wall thickness was fabricated using CCT, and the electrochemical properties of these assemblies were evaluated. A decrease in polarization effects, resulting from the higher surface area mesostructured features, was found to produce significantly enhanced electrochemical performance. The discharge capacity of an unpatterned thin film of V2O5 (â¼8.1 µAh/cm2) was found to increase to â¼10.2 µAh/cm2 when the material was patterned by CCT, affording enhanced charge storage capabilities as well as a decrease in the irreversible degradation during charge-discharge cycling. This work demonstrates the importance of creating mesoscale electrode surfaces for improving the performance of energy storage devices and provides fundamental understanding of the means to improve device performance.
RESUMEN
Polymeric binders are essential to battery electrodes, mechanically stabilizing the active materials. Most often, these binders are insulating, and conductive carbons must be added to the electrode structure. Conductive polymer binders, those that transport both ions and electrons, are of primary interest because they potentially eliminate the need for carbon additives. However, it is challenging to incorporate both ion- and electron-conductive polymeric binders into electrode systems because of differences in physical affinities among the two polymer types and the electroactive material. Here, we investigate amphiphilic polymeric binders comprised of electron- and ion-conducting poly(3-hexylthiophene)-block-poly(ethylene oxide) (P3HT-b-PEO) as compared to P3HT, PEO, and a blend of P3HT/PEO homopolymers in carbon-free V2O5 cathodes. The electrode with P3HT-b-PEO binder has the highest capacity of 190 mAh/g, whereas V2O5 is only 77 mAh/g at a C rate of 0.1 after over 200 cycles: a 2.5-fold improvement. Similarly P3HT, PEO, and the blend have capacities of 139, 130, and 70 mAh/g, which are not nearly as impressive as the block copolymer binder. The unique architecture of P3HT-b-PEO, wherein P3HT and PEO blocks are covalently bonded, promotes the uniform distribution of conductive binders within the V2O5 structure, whereas the analogous P3HT/PEO blend suffers from phase separation. This work demonstrates that conductive block copolymer binders enable carbon-free electrodes for lithium-ion battery systems.
RESUMEN
Mechanically robust battery electrodes are desired for applications in wearable devices, flexible displays, and structural energy and power. In this regard, the challenge is to balance mechanical and electrochemical properties in materials that are inherently brittle. Here, we demonstrate a unique water-based self-assembly approach that incorporates a diblock copolymer bearing electron- and ion-conducting blocks, poly(3-hexylthiophene)-block-poly(ethyleneoxide) (P3HT-b-PEO), with V2O5 to form a flexible, tough, carbon-free hybrid battery cathode. V2O5 is a promising lithium intercalation material, but it remains limited by its poor conductivity and mechanical properties. Our approach leads to a unique electrode structure consisting of interlocking V2O5 layers glued together with micellar aggregates of P3HT-b-PEO, which results in robust mechanical properties, far exceeding the those obtained from conventional fluoropolymer binders. Only 5 wt % polymer is required to triple the flexibility of V2O5, and electrodes comprised of 10 wt % polymer have unusually high toughness (293 kJ/m(3)) and specific energy (530 Wh/kg), both higher than reduced graphene oxide paper electrodes. Furthermore, addition of P3HT-b-PEO enhances lithium-ion diffusion, eliminates cracking during cycling, and boosts cyclability relative to V2O5 alone. These results highlight the importance of tradeoffs between mechanical and electrochemical performance, where polymer content can be used to tune both aspects.
Asunto(s)
Suministros de Energía Eléctrica , Electrodos , Polímeros , Compuestos de VanadioRESUMEN
A challenge in developing photovoltaic devices is to minimize the loss of electrons, which can seriously deteriorate energy conversion efficiency. In particular, minimizing this negative process in dye-sensitized solar cells (DSCs) is imperative. Herein, we use three different kinds of siloxanes, which are adsorbable to titania surfaces and polymerizable in forming a surface passivation layer, to reduce the electron loss. The siloxanes used are tetraethyl orthosilicate (TEOS or compound A), 1-(3-(1H-imidazol-1-yl)propyl)-3-(3-triethoxysilyl) propyl) urea (compound B), and N-(3-triethoxysilylpropyl)-N'[3-(3-methyl-1H-imidazol-3-ium) propyl] urea iodide (compound C). Titania surface passivation by either compound B or C was comparatively more effective in increasing the electron lifetime than TEOS. In the case of small-sized TEOS combined with either large-sized compound B or C, a thinner and denser passivation layer was presumably developed, thus increasing electron lifetime further. Intriguingly, device AB shows the longest electron lifetime, whereas device AC has the highest energy conversion efficiency among these experimental conditions. These results suggest that, in this special case, the electron lifetime may not be a dominant parameter in determining the energy conversion efficiency.