Boosting thermal energy transport across the interface between phase change materials and metals via self-assembled monolayers.

Thermal energy storage using phase change materials (PCMs) has great potential to reduce the weather dependency of sustainable energy sources. However, the low thermal conductivity of most PCMs is a long-standing bottleneck for large-scale practical applications. In modifications to increase the thermal conductivity of PCMs, the interfacial thermal resistance (ITR) between PCMs and discrete additives or porous networks reduces the effective thermal energy transport. In this work, we investigated the ITR between a metal (gold) and a polyol solid-liquid PCM (erythritol) at various temperatures including temperatures below the melting point (300 and 350 K), near the melting point (390, 400, 410 K, etc) and above the melting point (450 and 500 K) adopting non-equilibrium molecular dynamics. Since the gold-erythritol interfacial thermal conductance (ITC) is low regardless of whether erythritol is melted or not (<40 MW m-2K-1), self-assembled monolayers (SAMs) were used to boost the interfacial thermal energy transport. The SAM with carboxyl groups was found to increase the ITC most (by a factor of 7-9). As the temperature increases, the ITC significantly increases (by ∼50 MW m-2K-1) below the melting point but decreases little above the melting point. Further analysis revealed that the most obvious influencing factor is the interfacial binding energy. This work could build on existing composite PCM solutions to further improve heat transfer efficiency of energy storage applications in both liquid and solid states.

Safety and anatomical outcome analysis after flow diverter coverage of the anterior cerebral artery.

OBJECTIVES: Few studies on ischemic complications and flow changes after a flow diverter covering the anterior cerebral artery. The purpose of the study was to explore the ischemic complications and anatomical alterations associated with the flow diverter after it covers the anterior cerebral artery. MATERIALS AND METHODS: In this single-center study, patients treated with FD covering the anterior cerebral artery at the First Affiliated Hospital of Zhengzhou University were retrospectively collected. The primary endpoint was ischemic complications related to the anterior cerebral artery. Secondary endpoints were anatomical changes in the anterior cerebral artery postoperatively and at follow-up. RESULTS: A total of 59 patients were included in this study. Four (6.8%) patients presented with ischemic stroke symptoms. Immediately after the procedure, complete occlusion of A1 and decreased blood flow was observed in 13 (22.0%) and 21 patients (35.6%), respectively. At follow-up, A1 artery was occluded in 34 patients (57.6%) and decreased blood flow was observed in 10 patients (16.9%). Symptoms of neurological deficits related to the anterior cerebral artery were not observed in all patients at follow-up. CONCLUSION: Coverage of A1 is safe, with a low incidence of ischemic stroke, when using an FD to treat aneurysms. Risk of reduced perfusion of the anterior cerebral artery postoperatively even if the anterior communicating artery is open. In cases with A1 occlusion, the blood flow in the distal the anterior cerebral artery can be adequately compensated by opening the anterior communicating artery and good vascular anastomoses.

Masking Strategy Constructed Metal Coordination Hydrogels with Improved Mechanical Properties for Flexible Electronic Sensors.

Metal coordination hydrogels (MC-HGs) that introduce dynamically coordinate bonds together with metal ionic conduction have attracted considerable attention in flexible electronics. However, the traditional soaking method alleged to have technical scalability faces the challenge of forming MC-HGs with a "core-shell" structure, which undoubtedly reduces the whole mechanical properties and ionic stimulation responsiveness required for flexible electronics materials. Herein, a novel strategy referred to as "masking" has been proposed based on the theory of the valence bond and coordination chemistry. By regulating the masking agents and their concentrations as well as pairing mode with the metal ions, the whole mechanical properties of the resulting composites (MC-HGsMasking) show nearly double the values of their traditional soaking samples (MC-HGsSoaking). For example, the fracture stress and toughness of Fe-HGsMasking(SA, 5.0 g/L) are 1.55 MPa and 2.14 MJ/m3, almost twice those of Fe-HGsSoaking (0.83 MPa and 0.93 MJ/m3, respectively). Microstructure characterization combined with finite element analysis, molecular dynamics, and first-principles simulations demonstrates that the masking strategy first facilitating interfacial permeation of metal complexes and then effective coordination with functional ligands (carboxylates) of the hydrogels is the mechanism to strengthen the mechanical properties of composites MC-HGsMasking, which has the potential to break through the limitations of current MC-HGs in flexible electronic sensor applications.

Molecular self-assembled cellulose enabling durable, scalable, high-power osmotic energy harvesting.

In recent years, renewable cellulose-based ion exchange membranes have emerged as promising candidates for capturing green, abundant osmotic energy. However, the low power density and structural/performance instability are challenging for such cellulose membranes. Herein, cellulose-molecule self-assembly engineering (CMA) is developed to construct environmentally friendly, durable, scalable cellulose membranes (CMA membranes). Such a strategy enables CMA membranes with ideal nanochannels (∼7 nm) and tailored channel lengths, which support excellent ion selectivity and ion fluxes toward high-performance osmotic energy harvesting. Finite element simulations also verified the function of tailored nanochannel length on osmotic energy conversion. Correspondingly, our CMA membrane shows a high-power density of 2.27 W/m2 at a 50-fold KCl gradient and super high voltage of 1.32 V with 30-pair CMA membranes (testing area of 22.2 cm2). In addition, the CMA membrane demonstrates long-term structural and dimensional integrity in saline solution, due to their high wet strength (4.2 MPa for N-CMA membrane and 0.5 MPa for P-CMA membrane), and correspondingly generates ultrastable yet high power density more than 100 days. The self-assembly engineering of cellulose molecules constructs high-performance ion-selective membranes with environmentally friendly, scalable, high wet strength and stability advantages, which guide sustainable nanofluidic applications beyond the blue energy.

Multi-Scale Engineered 2D Carbon Polyhedron Array with Enhanced Electrocatalytic Performance.

Electrocatalyst engineering from the atomic to macroscopic level of electrocatalysts is one of the most powerful routes to boost the performance of electrochemical devices. However, multi-scale structure engineering mainly focuses on the range of atomic-to-particle scale such as hierarchical porosity engineering, while catalyst engineering at the macroscopic level, such as the arrangement configuration of nanoparticles, is often overlooked. Here, a 2D carbon polyhedron array with a multi-scale engineered structure via facile chemical etching, ice-templating induced self-assembly, and high-temperature pyrolysis processes is reported. Controlled phytic acid etching of the carbon precursor introduces homogeneous atomic phosphorous and nitrogen doping, as well as a well-defined mesoporous structure. Subsequent ice-templated self-assembly triggers the formation of a 2D particle array superstructure. The atomic-level doping gives rise to high intrinsic activity, while the well-engineered porous structure and particle arrangement addresses the mass transport limitations at the microscopic particle level and macroscopic electrode level. As a result, the as-prepared electrocatalyst delivers outstanding performance toward oxygen reduction reaction in both acidic and alkaline media, which is better than recently reported state-of-the-art metal-free electrocatalysts. Molecular dynamics simulation together with extensive characterizations indicate that the performance enhancement originates from multi-scale structural synergy.

Safinamide alleviates hyperalgesia via inhibiting hyperexcitability of DRG neurons in a mouse model of Parkinson's disease.

Pain is a widespread non-motor symptom that presents significant treatment challenges in patients with Parkinson's disease (PD). Safinamide, a new drug recently introduced for PD treatment, has demonstrated analgesic effects on pain in PD patients, though the underlying mechanisms remain unclear. To investigate the analgesic and anti-PD effect of safinamide, 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced PD mouse model was used, and rasagiline as positive control on motor symptoms. Notably, only safinamide alleviated hyperalgesia in MPTP mice. Whole-cell patch-clamp recordings of dorsal root ganglion (DRG) neurons revealed hyperexcitability in MPTP mice, which safinamide counteracted in a concentration-dependent manner. The voltage clamp further demonstrated that sodium current in DRG neurons of MPTP mice was enhanced and safinamide reduced sodium current density. RT-qPCR identified upregulated Nav1.7 and Nav1.8 transcripts (Scn9a and Scn10a) in DRG neurons of MPTP mice. Our results suggest that safinamide could relieve hyperalgesia by inhibiting DRG neuron hyperexcitability in MPTP mice.

Integrated Ink Printing Paper Based Self-Powered Electrochemical Multimodal Biosensing (IFP-Multi ) with ChatGPT-Bioelectronic Interface for Personalized Healthcare Management.

Personalized healthcare management is an emerging field that requires the development of environment-friendly, integrated, and electrochemical multimodal devices. In this study, the concept of integrated paper-based biosensors (IFP-Multi ) for personalized healthcare management is introduced. By leveraging ink printing technology and a ChatGPT-bioelectronic interface, these biosensors offer ultrahigh areal-specific capacitance (74633 mF cm-2 ), excellent mechanical properties, and multifunctional sensing and humidity power generation capabilities. More importantly, the IFP-Multi devices have the potential to simulate deaf-mute vocalization and can be integrated into wearable sensors to detect muscle contractions and bending motions. Moreover, they also enable monitoring of physiological signals from various body parts, such as the throat, nape, elbow, wrist, and knee, and successfully record sharp and repeatable signals generated by muscle contractions. In addition, the IFP-Multi devices demonstrate self-powered handwriting sensing and moisture power generation for sweat-sensing applications. As a proof-of-concept, a GPT 3.5 model-based fine-tuning and prediction pipeline that utilizes recorded physiological signals through IFP-Multi is showcased, enabling artificial intelligence with multimodal sensing capabilities for personalized healthcare management. This work presents a promising and ecofriendly approach to developing paper-based electrochemical multimodal devices, paving the way for a new era of healthcare advancements.

Daytime radiative cooling multilayer films designed by a machine learning method and genetic algorithm.

Recently, there has been growing interest and attention towards daytime radiative cooling. This cooling technology is considered a potentially significant alternative to traditional cooling methods because of its neither energy consumption nor harmful gas emission during operation. In this paper, a daytime radiative cooling emitter (DRCE) consisting of polydimethylsiloxane, silicon dioxide, and aluminum nitride from top to bottom on a silver-silicon substrate was designed by a machine learning method (MLM) and genetic algorithm to achieve daytime radiative cooling. The optimal DRCE had 94.43% average total hemispherical emissivity in the atmospheric window wavelength band and 98.25% average total hemispherical reflectivity in the solar radiation wavelength band. When the ambient temperature was 30°C, and the power of solar radiation was about 900W/m 2, the net cooling power of the optimal DRCE could achieve 140.38W/m 2. The steady-state temperature of that could be approximately 9.08°C lower than the ambient temperature. This paper provides a general research strategy for MLM-driven design of DRCE.

PACAP/PAC1-R activation contributes to hyperalgesia in 6-OHDA-induced Parkinson's disease model rats via promoting excitatory synaptic transmission of spinal dorsal horn neurons.

Pain is a common annoying non-motor symptom in Parkinson's disease (PD) that causes distress to patients. Treatment for PD pain remains a big challenge, as its underlying mechanisms are elusive. Pituitary adenylate cyclase-activating polypeptide (PACAP) and its receptor PAC1-R play important roles in regulating a variety of pathophysiological processes. In this study, we investigated whether PACAP/PAC1-R signaling was involved in the mechanisms of PD pain. 6-hydroxydopamine (6-OHDA)-induced PD model was established in rats. Behavioral tests, electrophysiological and Western blotting analysis were conducted 3 weeks later. We found that 6-OHDA rats had significantly lower mechanical paw withdrawal 50% threshold in von Frey filament test and shorter tail flick latency, while mRNA levels of Pacap and Adcyap1r1 (gene encoding PAC1-R) in the spinal dorsal horn were significantly upregulated. Whole-cell recordings from coronal spinal cord slices at L4-L6 revealed that the frequency of spontaneous excitatory postsynaptic currents (sEPSCs) in dorsal horn neurons was significantly increased, which was reversed by application of a PAC1-R antagonist PACAP 6-38 (250 nM). Furthermore, we demonstrated that intrathecal microinjection of PACAP 6-38 (0.125, 0.5, 2 µg) dose-dependently ameliorated the mechanical and thermal hyperalgesia in 6-OHDA rats. Inhibition of PACAP/PAC1-R signaling significantly suppressed the activation of Ca2+/calmodulin-dependent protein kinase II and extracellular signal-regulated kinase (ERK) in spinal dorsal horn of 6-OHDA rats. Microinjection of pAAV-Adcyap1r1 into L4-L6 spinal dorsal horn alleviated hyperalgesia in 6-OHDA rats. Intrathecal microinjection of ERK antagonist PD98059 (10 µg) significantly alleviated hyperalgesia in 6-OHDA rats associated with the inhibition of sEPSCs in dorsal horn neurons. In addition, we found that serum PACAP-38 concentration was significantly increased in PD patients with pain, and positively correlated with numerical rating scale score. In conclusion, activation of PACAP/PAC1-R induces the development of PD pain and targeting PACAP/PAC1-R is an alternative strategy for treating PD pain.

Prediction of water transport properties on an anisotropic wetting surface via deep learning.

Understanding the water flow behavior on an anisotropic wetting surface is of practical significance in nanofluidic devices for their performance improvement. However, current methods of experiments and simulations face challenges in measuring water transportation in real time and visually displaying it. Here, molecular dynamics simulation was integrated with our developed multi-attribute point cloud dataset and a customized network of deep learning to achieve mapping from an anisotropic wetting surface to the static and dynamic behaviors of water molecules and realize the high-performance prediction of water transport behavior. More importantly, for the chaotic phenomenon of water molecule flow caused by thermal fluctuation and limited sampling, we proposed a nanoparticle tracking optimization strategy to improve the prediction performance of the velocity field. The prediction results proved that the deep learning framework proposed in this work had superior performance in terms of accuracy, computational cost and visualization, and had the potential for generality to model the transport behavior of different molecules. Our framework can be expected to motivate the development of real-time water flow prediction at an interface and contribute to the optimization and design of surface structures in nanofluidic devices.

A Thermochromic, Viscoelastic Nacre-like Nanocomposite for the Smart Thermal Management of Planar Electronics.

Cutting-edge heat spreaders for soft and planar electronics require not only high thermal conductivity and a certain degree of flexibility but also remarkable self-adhesion without thermal interface materials, elasticity, arbitrary elongation along with soft devices, and smart properties involving thermal self-healing, thermochromism and so on. Nacre-like composites with excellent in-plane heat dissipation are ideal as heat spreaders for thin and planar electronics. However, the intrinsically poor viscoelasticity, i.e., adhesion and elasticity, prevents them from simultaneous self-adhesion and arbitrary elongation along with current flexible devices as well as incurring high interfacial thermal impedance. In this paper, we propose a soft thermochromic composite (STC) membrane with a layered structure, considerable stretchability, high in-plane thermal conductivity (~ 30 W m-1 K-1), low thermal contact resistance (~ 12 mm2 K W-1, 4-5 times lower than that of silver paste), strong yet sustainable adhesion forces (~ 4607 J m-2, 2220 J m-2 greater than that of epoxy paste) and self-healing efficiency. As a self-adhesive heat spreader, it implements efficient cooling of various soft electronics with a temperature drop of 20 °C than the polyimide case. In addition to its self-healing function, the chameleon-like behavior of STC facilitates temperature monitoring by the naked eye, hence enabling smart thermal management.

Anti-hyperuricemia effect of hesperetin is mediated by inhibiting the activity of xanthine oxidase and promoting excretion of uric acid.

Hesperetin is a natural flavonoid with many biological activities. In view of hyperuricemia treatment, the effects of hesperetin in vivo and in vitro, and the underlying mechanisms, were explored. Hyperuricemia models induced by yeast extract (YE) or potassium oxonate (PO) in mice were created, as were models based on hypoxanthine and xanthine oxidase (XOD) in L-O2 cells and sodium urate in HEK293T cells. Serum level of uric acid (UA), creatinine (CRE), and urea nitrogen (BUN) were reduced significantly after hesperetin treatment in vivo. Hesperetin provided hepatoprotective effects and inhibited xanthine oxidase activity markedly, altered the level of malondialdehyde (MDA), glutathione peroxidase (GSH-PX) and catalase (CAT), downregulated the XOD protein expression, toll-like receptor (TLR)4, nucleotide binding oligomerization domain-like receptor family pyrin domain-containing 3 (NLRP3) inflammasome, interleukin-18 (IL-18), upregulated forkhead box O3a (FOXO3a), manganese superoxide dismutase (MnSOD) in a uric acid-synthesis model in mice. Protein expression of organic anion transporter 1 (OAT1), OAT3, organic cationic transporter 1 (OCT1), and OCT2 was upregulated by hesperetin intervention in a uric acid excretion model in mice. Our results proposal that hesperetin exerts a uric acid-lowering effect through inhibiting xanthine oxidase activity and protein expression, intervening in the TLR4-NLRP3 inflammasome signaling pathway, and up-regulating expression of FOXO3a, MnSOD, OAT1, OAT3, OCT1, and OCT2 proteins. Thus, hesperetin could be a promising therapeutic agent against hyperuricemia.

Effects of continuous renal replacement therapy on inflammation-related anemia, iron metabolism and prognosis in sepsis patients with acute kidney injury.

BACKGROUND: This study aims to evaluate the effect of continuous renal replacement therapy (CRRT) on inflammation-related anemia, iron metabolism, and the prognosis in sepsis patients with acute kidney injury (AKI). METHODS: Sepsis patients with AKI were prospectively enrolled and randomized into the CRRT and control groups. The clinical and laboratory data on days 1, 3 and 7 after intensive care unit (ICU) admission were collected. The serum interleukin (IL)-6, hepcidin, erythropoietin, ferritin, and soluble transferrin receptor (sTfR) were determined by enzyme-linked immunosorbent assay. The Sequential Organ Failure Assessment (SOFA) score and 28-day mortality were recorded. Data were analyzed using Pearson's Chi-square test or Fisher's exact test (categorical variables), and Mann-Whitney U-test or t-test (continuous variables). RESULTS: The hemoglobin and serum erythropoietin levels did not significantly differ between the CRRT and control groups though gradually decreased within the first week of ICU admission. On days 3 and 7, the serum IL-6, hepcidin, ferritin, and red blood cell distribution width significantly decreased in the CRRT group compared to the control group (all P<0.05). On day 7, the serum iron was significantly elevated in the CRRT group compared to the control group (P<0.05). However, the serum sTfR did not significantly differ between the groups over time. In addition, the SOFA scores were significantly lower in the CRRT group compared to the control group on day 7. The 28-day mortality did not significantly differ between the control and CRRT groups (38.0% vs. 28.2%, P=0.332) . CONCLUSION: CRRT might have beneficial effects on the improvement in inflammation-related iron metabolism and disease severity during the first week of ICU admission but not anemia and 28-day mortality in sepsis patients with AKI.

Natural polyphenol tannin-immobilized composites: rational design and versatile applications.

Tannins, which are natural plant polyphenols, are widely used in different fields, especially in biomedical applications due to their unique properties, including high abundance, low cost, structural diversity, protein precipitation, biocompatibility, and biodegradability. However, they fail to satisfy the requirements in some specific applications (e.g., environmental remediation) on account of their water solubility, making their separation and regeneration difficult. Inspired by the design of composite materials, tannin-immobilized composites have emerged as promising and novel materials and combine or even surpass the advantages of each of their components. This strategy can endow tannin-immobilized composites with efficient manufacturing properties, high strength, good stability, easy chelating/coordinating ability, excellent antibacterial property, biological compatibility, bioactivity, chemical/corrosion resistance, and strong adhesive performance, which significantly expand their application in various fields. In this review, initially we summarize the design strategy of tannin-immobilized composites, mainly concentrating on the choice of immobilized substrate (e.g., natural polymers, synthetic polymers, and inorganic materials) as well as the binding interaction (e.g., Mannich reaction, Schiff base reaction, graft copolymerization, oxidation coupling, electrostatic interaction, and hydrogen bonding) between them. Further, the application of tannin-immobilized composites in the biomedical (tissue engineering, wound healing, cancer therapy, and biosensors) and other (leather materials, environmental remediation, and functional food packaging) fields is highlighted. Finally, we conclude with some thoughts on the open challenges and future perspectives of tannin composites. It can be anticipated that tannin-immobilized composites will continuously draw attention from more and more researchers, and further promising applications of tannin composites will be explored.

Neferine ameliorates nonalcoholic steatohepatitis through regulating AMPK pathway.

BACKGROUND: Nonalcoholic fatty liver disease (NAFLD), peculiarly nonalcoholic steatohepatitis (NASH), has become the main cause of liver transplantation and liver-related death. However, the US Food and Drug Administration has not approved a specific medication for treating NASH. Neferine (NEF), a natural bisbenzylisoquinoline alkaloid separated from the traditional Chinese medicine Nelumbinis plumula, has a variety of pharmacological properties, especially on metabolic diseases. Nevertheless, the anti-NASH effect and mechanisms of NEF remain unclear. PURPOSE: This study aimed to investigate the amelioration of NEF on NASH and the potential mechanisms. STUDY DESIGN: HepG2 cells, hepatic stellate cells (HSCs) and high-fat diet (HFD)+carbon tetrachloride (CCl4) induced C57BL/6 mice were used to observe the effect of NEF against NASH and investigate the engaged mechanism. METHODS: HSCs and HepG2 cells stimulated by oleic acid (OA) were treated with NEF. C57BL/6 mice were fed with HFD+CCl4 to induce NASH mouse model and treated with or without NEF (5 mg/kg or 10 mg/kg, once daily, i.p) for 4 weeks. RESULTS: NEF significantly attenuated the accumulation of lipid droplets, intracellular triglyceride (TG) levels and hepatocytes apoptosis in OA-exposed HepG2 cells. NEF not only enhanced the AMPK and ACC phosphorylation in OA-stimulated HepG2 cells, but also reduced inflammatory response and fibrosis in lipopolysaccharide (LPS)-stimulated HepG2 and in LX-2, respectively. In HFD+CCl4-induced NASH mice, pathological staining confirmed NEF treatment mitigated hepatic lipid deposition, inflammatory cell infiltration as well as hepatic fibrosis. Furthermore, the liver weight, serum and hepatic TG and total cholesterol (TC) and aspartate aminotransferase (AST) and alanine aminotransferase (ALT) were decreased compared with the model group. HFD+CCl4 also induced the upregulation of specific proteins and genes associated to inflammation (ILs, TNF-α, NLRP3, ASC, CCL2 and CXCL10) and hepatic fibrosis (collagens, α-SMA, TGF-ß and TIPM1), which were also suppressed by NEF treatment. CONCLUSION: Our results demonstrated that NEF played a protective role in hepatic steatosis via the regulation of AMPK pathways, which may serve as an attractive candidate for a potential novel strategy on prevention and treatment of NASH.

Facile degradation of chitosan-sodium alginate-chromium (III) gel in relation to leather re-tanning and filling.

Natural polysaccharide hydrogel, exemplified by chitosan­sodium alginate (CS-SA), has been prevailing in adsorption of chromium (III) (Cr(III)) containing contaminant. However, the traditional desorption of CS-SA-Cr(III) to recycle the adsorbent faces the problems including chemical desorbents secondary pollution, resource waste of the terminal CS-SA adsorbents, and tedious work of reusing the desorbed Cr(III). Herein, the adsorption product, CS-SA-Cr(III) gel, was degraded to CS/SA/Cr(III) sol and applied in leather re-tanning and filling processes directly. To achieve this goal, three degradation methods were used to transform the gel to sol. Due to the excellent overall performance of the CS/SA/Cr(III)-HMD4 sol (obtained by the hydrothermal-mechanical degradation method for 4 h (HMD4)), including wide size and distribution range, moderate viscosity (54 ± 3.1 mPa·s), high electronegativity (-38.6 ± 5.8 mV), and good stability, the resultant leather after re-tanning and filling by the sol achieved fascinating properties such as good thermal stability (Ts, 116.8 ± 1.8 °C; Td, 94.2 ± 1.7 °C), mechanical performance (tensile strength, 6.9 ± 0.52 MPa; elongation at break, 95 ± 3.0 %), and superduper thickening rate (31.8 %). Moreover, the mechanism of good re-tanning and filling effects was deciphered. Therefore, this work intends to overcome the limitation of traditional desorption technology and further realizes the high-valued application of the exhausted CS-SA-Cr(III) in leather re-tanning and filling processes.

Reversible bipolar thermopower of ionic thermoelectric polymer composite for cyclic energy generation.

The giant thermopower of ionic thermoelectric materials has attracted great attention for waste-heat recovery technologies. However, generating cyclic power by ionic thermoelectric modules remains challenging, since the ions cannot travel across the electrode interface. Here, we reported a reversible bipolar thermopower (+20.2 mV K-1 to -10.2 mV K-1) of the same composite by manipulating the interactions of ions and electrodes. Meanwhile, a promising ionic thermoelectric generator was proposed to achieve cyclic power generation under a constant heat course only by switching the external electrodes that can effectively realize the alternating dominated thermodiffusion of cations and anions. It eliminates the necessity to change the thermal contact between material and heat, nor does it require re-establish the temperature differences, which can favor improving the efficiency of the ionic thermoelectrics. Furthermore, the developed micro-thermal sensors demonstrated high sensitivity and responsivity in light detecting, presenting innovative impacts on exploring next-generation ionic thermoelectric devices.