High-capacity adsorption of Cr(VI) by lignin-based composite: Characterization, performance and mechanism.

An environmentally friendly lignin-based composite (Lignin-PEI) was facilely prepared via cross-linking enzymatic hydrolysis lignin matrix and branched poly (ethylene imine). The specific physicochemical and structural properties of lignin-PEI were characterized by elemental analysis, N2 physisorption, GPC, TG, SEM, FT-IR and XPS. The nitrogen content of lignin-PEI was 9.02%, and the BET surface area was 20.32 m2/g. The synthetic composite showed high capacity and selectivity of Cr(VI) adsorption. The influence of solution pH, contact time, initial Cr(VI) concentration, and coexisting ions on Cr(VI) adsorption on lignin-PEI was systemically studied. The Cr(VI) adsorption on lignin-PEI was well described by the Langmuir model. According to the Langmuir model, the Cr(VI) adsorption capacity on lignin-PEI was as high as 898.2 mg/g at 318 K and pH 2.0. The calculated thermodynamic parameters, such as ΔG, ΔH, and ΔS, indicated the spontaneous and endothermic adsorption of Cr(VI) on lignin-PEI. The adsorption of Cr(VI) by lignin-PEI was following the pseudo-second-order kinetic model, indicating that it was a chemisorption process. The uptake mechanism was demonstrated to be electrostatic attraction, ion exchange, complexation and partial reduction. This work provided a promising candidate for Cr(VI) uptake with lignin-based biosorbents.

Novel betaine-amino acid based natural deep eutectic solvents for enhancing the enzymatic hydrolysis of corncob.

A novel natural deep eutectic solvent (NDES) with water content ranging from 65 to 93 wt%, in which betaine (Bet) acts as the cation and amino acids (AAs) as the anions, was prepared by a simple and green chemical route. [Bet][AA] NDES showed excellent xylan and lignin solubility, however, scare cellulose solubility. A mild and facile pretreatment process with [Bet][AA] NDES was carried out at 60 °C for 5 h. The enzymatic hydrolysis efficiency of cellulose and corncob was significantly improved. Detailed characterization showed that the enhancement of cellulose digestibility derived mainly from xylan and lignin removal. Xylan and lignin removal for [Bet][Lys]-W87 was 47.68 and 49.06%, while it was 42.20% and 57.01% for [Bet][Arg]-W82, respectively. FT-IR, SEM, XRD, and HSQC NMR studies confirmed the effectiveness and mechanism of [Bet][Lys]-W87 and [Bet][Arg]-W82 on biomass pretreatment.

Facile preparation of lignosulfonate/N-methylaniline composite and its application in efficient removal of Cr(VI) from aqueous solutions.

A lignin-based biosorbent (LSMA) was prepared by cross-linking lignosulfonate and N-methylaniline with the aid of ammonium persulfate for efficient removal of Cr(VI) from aqueous solution. Since LSMA possessed both amino groups and oxygen-containing functional groups, such as phenolic, carboxyl, and sulfonic groups, the maximum adsorption capacity of 1264.8 mg/g was achieved at 318 K according to the Langmuir isotherm. LSMA also showed excellent performance at low Cr(VI) concentration solution. The hazardous Cr(VI) solution of 50 mg/L can be fully removed within 10 min. The adsorption process of LSMA fitted the pseudo-second-order kinetic model, suggesting the chemical adsorption characteristics. Moreover, the adsorption process was spontaneous and endothermic. LSMA worked very well even with high content of competing anions. The removal mechanism was demonstrated to be the adsorption of Cr(VI) anions on LSMA with abundant functional groups, and reduction of Cr(VI) to less toxic Cr(III) by the adjacent electron donor groups. The generated Cr(III) was immobilized on LSMA by surface complexation and precipitation. LSMA composite has a great potential for the treatment of Cr(VI)-contaminated water.