Drug-eluting wound dressings having sustained release of antimicrobial compounds.

Wound healing is a complex and costly public health problem that should be timely addressed to achieve a rapid and adequate tissue repair avoiding or even eliminating potential pathogenic infection. Chronic infected non-healing wounds represent a serious concern for health care systems. Efficient wound dressings with tailored therapy having the best response and highest safety margin for the management of chronic non-healing wounds are still needed. The use of novel wound dressing materials has emerged as a promising tool to fulfil these requirements. In this work, asymmetric electrospun polycaprolactone (PCL)-based nanofibers (NFs) were decorated with electrosprayed poly(lactic-co-glycolic acid) microparticles (PLGA MPs) containing the natural antibacterial compound thymol (THY) in order to obtain drug eluting antimicrobial dressings having sustained release. The synthesized dressings successfully inhibited the in vitro growth of Staphylococcus aureus ATCC 25923, showing also at the same doses cytocompatibility on human dermal fibroblasts and keratinocyte cultures after treatment for 24 h, which was not observed when using free thymol. An in vivo murine excisional wound splinting model, followed by the experimental infection of the wounds with S. aureus and their treatment with the synthesized dressings, pointed to the reduction of the bacterial load in wounds after 7 days, though the total elimination of the infection was not reached. The findings indicated the relevance of the direct contact between the dressings and the bacteria, highlighting the need to tune their design considering the wound surface and the nature of the antimicrobial cargo contained.

Efficiency of Antimicrobial Electrospun Thymol-Loaded Polycaprolactone Mats In Vivo.

Due to the prevalence of antimicrobial resistant pathogens, natural products with long-term antimicrobial activities are considered as potential alternatives. In this work, polycaprolactone (PCL) electrospun fibers with mean diameters around 299 nm and loaded with 14.92 ± 1.31% w/w thymol (THY) were synthesized. The mats had appropriate elongation at break (74.4 ± 9.5%) and tensile strength (3.0 ± 0.5 MPa) to be potentially used as wound dressing materials. In vivo studies were performed using eight to ten week-old male SKH1 hairless mice. The infection progression was evaluated through a semiquantitative method and quantitative polymerase chain reaction. The analyses of post-mortem samples indicated that THY-loaded PCL fibers acted as inhibitors of Staphylococcus aureus ATCC 25923 strain growth being as efficient as chlorhexidine (CLXD). Histopathological and immunohistochemical studies showed that the PCL-THY-treated wounds were almost free of an inflammatory reaction. Therefore, wound dressings containing natural compounds can prevent infection and promote wound healing and prompt regeneration.

Targeted Release of Probiotics from Enteric Microparticulated Formulations.

The development of advanced probiotic delivery systems, which preserve bacteria from degradation of the gastrointestinal tract and achieve a targeted release mediated by pH-independent swelling, is of great interest to improve the efficient delivery of probiotic bacteria to the target tissue. Gram-positive and Gram-negative bacteria models (Lactobacillus acidophilus (Moro) Hansen and Mocquot (ATCC® 4356™) and Escherichia coli S17, respectively) have been successfully encapsulated for the first time in pH-independent microparticulate polymethacrylates (i.e., Eudraguard biotic) used for the targeted delivery of nutraceuticals to the colon. These bacteria have also been encapsulated within the mucoadhesive polymethacrylate Eudragit RS 100 widely used as targeted release formulation for active pharmaceutical ingredients. The enteric microparticles remained unaltered under simulated gastric conditions and released the contained viable microbial cargo under simulated intestinal conditions. Buoyancies of 90.2% and 57.3% for Eudragit and Eudraguard microparticles, respectively, and long-term stability (5 months) for the encapsulated microorganisms were found. Cytotoxicity of the microparticles formulated with both polymers was evaluated (0.5-20 mg/mL) on Caco-2 cells, showing high cytocompatibility. These results underline the suitability of the synthesized materials for the successful delivery of probiotic formulations to the target organ, highlighting for the first time the potential use of Eudraguard biotic as an effective enteric coating for the targeted delivery of probiotics.

Matryoshka-type gastro-resistant microparticles for the oral treatment of Mycobacterium tuberculosis.

AIM: Production of Matryoshka-type gastroresistant microparticles containing antibiotic-loaded poly lactic-co-glycolic acid (PLGA) nanoparticles (NP) against Mycobacterium tuberculosis. MATERIALS & METHODS: The emulsification and evaporation methods were followed for the synthesis of PLGA-NPs and methacrylic acid-ethyl acrylate-based coatings to protect rifampicin from degradation under simulated gastric conditions. RESULTS & CONCLUSION: The inner antibiotic-loaded NPs here reported can be released under simulated intestinal conditions whereas their coating protects them from degradation under simulated gastric conditions. The encapsulation does not hinder the antituberculosis action of the encapsulated antibiotic rifampicin. A sustained antibiotic release could be obtained when using the drug-loaded encapsulated NPs. Compared with the administration of the free drug, a more effective elimination of M. tuberculosis was observed when applying the NPs against infected macrophages. The antibiotic-loaded PLGA-NPs were also able to cross an in vitro model of intestinal barrier.

Cleavable and thermo-responsive hybrid nanoparticles for on-demand drug delivery.

By combining the photothermal ability of copper sulphide nanoparticles (NPs) upon excitation with Near Infrared (NIR) Light and the thermo-responsive properties of the homemade oligo (ethylene glycol) methyl ether methacrylate copolymer we have obtained fragmentable nanocomposites able to release a carried drug on-demand after NIR-light triggering. A complete physico-chemical characterization of the resulting nanoparticles has been carried out and their degradation assessed at different temperatures. Herein, we have also evaluated the drug loading capacity of those nanoparticles and the temperature dependence in their drug release kinetics using bupivacaine hydrochloride as a model drug. For those hybrid nanoparticles, subcytotoxic doses on four different cell lines and their potential interference in cell metabolism, induction of apoptosis, and cell cycle have been evaluated by Alamar Blue fluorometry and flow cytometry.

Enzyme structure and function protection from gastrointestinal degradation using enteric coatings.

Bovine Serum Albumin (BSA) and Horseradish Peroxidase (HRP) have been encapsulated within microparticulated matrices composed of Eudragit RS100 by the water-in-oil-in-water double emulsion solvent evaporation method. Good encapsulation efficiencies were achieved for BSA and HRP, 88.4 and 95.8%, respectively. The stability of the loaded proteins was confirmed by using circular dichroism and fluorescence. The gastroresistance of the protein-loaded microparticles was evaluated under simulated gastric conditions demonstrating the preservation of the structural integrity of the proteins loaded inside the particles. The enzymatic activity of HRP after being released from the enteric microparticles was evaluated by using the peroxidase substrate, revealing that the released enzyme preserved its 100% function. The high drug loadings achieved, reduced cytotoxicity and efficient gastric protection point out towards the potential use of those carriers as oral delivery vectors of therapeutic proteins offering a more controlled targeted release in specific sites of the intestine and an enhanced gastrointestinal absorption.

Controlled release of bupivacaine using hybrid thermoresponsive nanoparticles activated via photothermal heating.

Near-infrared (NIR) responsive nanoparticles are of great interest in the biomedical field as antennas for photothermal therapy and also as triggers for on-demand drug delivery. The present work reports the preparation of hollow gold nanoparticles (HGNPs) with plasmonic absorption in the NIR region covalently bound to a thermoresponsive polymeric shell that can be used as an on-demand drug delivery system for the release of analgesic drugs. The photothermal heating induced by the nanoparticles is able to produce the collapse of the polymeric shell thus generating the release of the local anesthetic bupivacaine in a spatiotemporally controlled way. Those HGNPs contain a 10 wt.% of polymer and present excellent reversible heating under NIR light excitation. Bupivacaine released at physiological temperature (37 °C) showed a pseudo-zero order release that could be spatiotemporally modified on-demand after applying several pulses of light/temperature above and below the lower critical solution temperature (LCST) of the polymeric shell. Furthermore, the nanomaterials obtained did not displayed detrimental effects on four mammalian cell lines at doses up to 0.2 mg/mL. From the results obtained it can be concluded than this type of hybrid thermoresponsive nanoparticle can be used as an externally activated on-demand drug delivery system.

Near infrared dye-labelled polymeric micro- and nanomaterials: in vivo imaging and evaluation of their local persistence.

The use of micro- and nanomaterials as carriers of therapeutic molecules can enhance the efficiency of treatments while avoiding side effects thanks to the development of controlled drug delivery systems. The binding of a dye to a drug or to a drug carrier has opened up a wide range of possibilities for an effective in vivo optical tracing of drug biodistribution by using non-invasive real-time technologies prior to their potential use as therapeutic vectors. Here, we describe the fluorescent tagging of polymeric micro- and nanomaterials based on poly(lactic-co-glycolic) acid and on the thermoresponsive poly(N-isopropylacrylamide) with the fluorescent probe IR-820 which was chemically modified for its covalent coupling to the materials. The chemical modification of the dye and the polymers yielded micro- and nanoparticulated labelled materials to be potentially used as drug depots of different therapeutic molecules. In vitro biological studies revealed their reduced cytotoxicity. A spatiotemporal in vivo micro- and nanoparticle tracking allowed the evaluation of the biodistribution of materials showing their local persistence and high biocompatibility after pathological studies. These results underline the suitability of these materials for the local, sustained, not harmful and/or on-demand drug delivery and the remarkable importance of evaluating the biodistribution of materials and tissue persistence for their use as local drug depots.

Current progress and challenges of nanoparticle-based therapeutics in pain management.

Pain is a widespread and growing health problem worldwide that exerts a considerable social and economic impact on both patients and healthcare systems and, therefore, on society in general. Although current treatment modalities include a wide variety of pharmacological and non-pharmacological approaches, due to the complexity of pain and individual differences in clinical response these options are not always effective in mitigating and relieving pain. In addition, some pain drugs such as non-steroidal anti-inflammatory drugs (NSAIDs), local anesthetics and opioids show several unfavorable side effects. Therefore, current research advances in this medical field are based on the development of potential treatments to address many of the unmet needs and to overcome the existing limitations in pain management. Nanoparticle drug delivery systems present an exciting opportunity as alternative platforms to improve efficacy and safety of medications currently in use. Herein, we review a broad range of nanoparticle formulations (organic nanostructures and inorganic nanoparticles), which have been developed to encapsulate an array of painkillers, paying special attention to the key advantages that these systems offer, (compared to the use of the free drug), as well as to the more relevant results of preclinical studies in animal models. Additionally, we will briefly discuss the impact of some of these nanoformulations in clinical trials.

Cymantrenyl-Nucleobases: Synthesis, Anticancer, Antitrypanosomal and Antimicrobial Activity Studies.

The synthesis of four cymantrene-5-fluorouracil derivatives (1-4) and two cymantrene-adenine derivatives (5 and 6) is reported. All of the compounds were characterized by spectroscopic methods and the crystal structure of two derivatives (1 and 6), together with the previously described cymantrene-adenine compound C was determined by X-ray crystallography. While the compounds 1 and 6 crystallized in the triclinic P-1 space group, compound C crystallized in the monoclinic P21/m space group. The newly synthesized compounds 1-6 were tested together with the two previously described cymantrene derivatives B and C for their in vitro antiproliferative activity against seven cancer cell lines (MCF-7, MCF-7/DX, MDA-MB-231, SKOV-3, A549, HepG2m and U-87-MG), five bacterial strains Staphylococcus aureus (methicillin-sensitive, methicillin-resistant and vancomycin-intermediate strains), Staphylococcus epidermidis, and Escherichia coli, including clinical isolates of S. aureus and S. epidermidis, as well as against the protozoan parasite Trypanosoma brucei. The most cytotoxic compounds were derivatives 2 and C for A549 and SKOV-3 cancer cell lines, respectively, with 50% growth inhibition (IC50) values of about 7 µM. The anticancer activity of the cymantrene compounds was determined to be due to their ability to induce oxidative stress and to trigger apoptosis and autophagy in cancer cells. Three derivatives (1, 4 and 5) displayed promising antitrypanosomal activity, with GI50 values in the low micromolar range (3-4 µM). The introduction of the 5-fluorouracil moiety in 1 enhanced the trypanocidal activity when compared to the activity previously reported for the corresponding uracil derivative. The antibacterial activity of cymantrene compounds 1 and C was within the range of 8-64 µg/mL and seemed to be the result of induced cell shrinking.

The effect of PEGylated hollow gold nanoparticles on stem cell migration: potential application in tissue regeneration.

Mesenchymal stem cells (MSCs) not only can be differentiated into different cell types but also have tropism towards injured or inflamed tissues serving as repair cells. Here we have demonstrated that MSCs containing gold nanoparticles (GNPs) whose surface has been functionalized with PEG show accelerated cell migration, successful scaffold colonization and regeneration. We report the impact of GNPs on the migration (by the wound healing assay), and proliferation (by flow cytometry analysis and by the detection of metabolic mitochondrial activity) on the behaviour of different cell lines including MSCs, HeLa cells, and human dermal fibroblasts. We conclude that GNPs are easily internalized by MSCs causing an increase in their migration rate, mediated by actin and tubulin with a 4-fold increased expression level of those proteins. We also demonstrate that MSCs containing GNPs are able to successfully colonize fibrin and PCL-based scaffolds and that an enhanced osteoblastic differentiation is reached when using the nanoparticle-laden cells compared to untreated cells used as a control. These results highlight the potential use of MSCs as therapeutic nanoparticle-carriers in regenerative medicine.

Bactericidal Effect of Gold-Chitosan Nanocomposites in Coculture Models of Pathogenic Bacteria and Human Macrophages.

The ability of pathogenic bacteria to develop resistance mechanisms to avoid the antimicrobial potential of antibiotics has become an increasing problem for the healthcare system. The search for more effective and selective antimicrobial materials, though not harmful to mammalian cells, seems imperative. Herein we propose the use of gold-chitosan nanocomposites as effective bactericidal materials avoiding damage to human cells. Nanocomposites were obtained by taking advantage of the reductive and stabilizing action of chitosan solutions on two different gold precursor concentrations. The resulting nanocomposites were added at different final concentrations to a coculture model formed by Gram-positive (Staphylococcus aureus) or Gram-negative (Escherichia coli) bacteria and human macrophages. Gold-chitosan colloids exhibited superior bactericidal ability against both bacterial models without showing cytotoxicity on human cells at the concentrations tested. Morphological and in vitro viability studies supported the feasibility of the infection model here described to test novel bactericidal nanomaterials. Flow cytometry and scanning electron microscopy analyses pointed to the disruption of the bacterial wall as the lethal mechanism. Data obtained in the present study suggest that gold-chitosan nanocomposites are powerful and promising nanomaterials for reducing bacteria-associated infections, respecting the integrity of mammalian cells, and displaying high selectivity against the studied bacteria.

Smart Dressings Based on Nanostructured Fibers Containing Natural Origin Antimicrobial, Anti-Inflammatory, and Regenerative Compounds.

A fast and effective wound healing process would substantially decrease medical costs, wound care supplies, and hospitalization significantly improving the patients' quality of life. The search for effective therapeutic approaches seems to be imperative in order to avoid the aggravation of chronic wounds. In spite of all the efforts that have been made during the recent years towards the development of artificial wound dressings, none of the currently available options combine all the requirements necessary for quick and optimal cutaneous regeneration. Therefore, technological advances in the area of temporary and permanent smart dressings for wound care are required. The development of nanoscience and nanotechnology can improve the materials and designs used in topical wound care in order to efficiently release antimicrobial, anti-inflammatory and regenerative compounds speeding up the endogenous healing process. Nanostructured dressings can overcome the limitations of the current coverings and, separately, natural origin components can also overcome the drawbacks of current antibiotics and antiseptics (mainly cytotoxicity, antibiotic resistance, and allergies). The combination of natural origin components with demonstrated antibiotic, regenerative, or anti-inflammatory properties together with nanostructured materials is a promising approach to fulfil all the requirements needed for the next generation of bioactive wound dressings. Microbially compromised wounds have been treated with different essential oils, honey, cationic peptides, aloe vera, plant extracts, and other natural origin occurring antimicrobial, anti-inflammatory, and regenerative components but the available evidence is limited and insufficient to be able to draw reliable conclusions and to extrapolate those findings to the clinical practice. The evidence and some promising preliminary results indicate that future comparative studies are justified but instead of talking about the beneficial or inert effects of those natural origin occurring materials, the scientific community leads towards the identification of the main active components involved and their mechanism of action during the corresponding healing, antimicrobial, or regenerative processes and in carrying out systematic and comparative controlled tests. Once those natural origin components have been identified and their efficacy validated through solid clinical trials, their combination within nanostructured dressings can open up new avenues in the fabrication of bioactive dressings with outstanding characteristics for wound care. The motivation of this work is to analyze the state of the art in the use of different essential oils, honey, cationic peptides, aloe vera, plant extracts, and other natural origin occurring materials as antimicrobial, anti-inflammatory and regenerative components with the aim of clarifying their potential clinical use in bioactive dressings. We conclude that, for those natural occurring materials, more clinical trials are needed to reach a sufficient level of evidence as therapeutic agents for wound healing management.

A temporal regulatory mechanism controls the different contribution of endoplasmic reticulum and plastidial ω-3 desaturases to trienoic fatty acid content during leaf development in soybean (Glycine max cv Volania).

We analyzed the molecular mechanism controlling ω-3 fatty acid desaturases during seed germination and leaf development in soybean. During germination, soybean seeds were characterized by a high 18:2(Δ9,12) level (more than 50%) and reduced 18:3(Δ9,12,15) content (10%). Interestingly, transcripts from all endoplasmic reticulum (GmFAD3A and GmFAD3B) and plastidial (GmFAD7-1/GmFAD7-2 or GmFAD8-1/GmFAD8-2) desaturase genes were detected during seed germination. Upon germination, soybean trifoliate leaf development was accompanied by an increase in linolenic acid (18:3(Δ9,12,15)). Our data showed that transcripts corresponding to the endoplasmic reticulum ω-3 desaturases GmFAD3A and GmFAD3B decreased with leaf development. No changes in the expression profile of the plastidial ω-3 desaturases GmFAD7-1 and GmFAD7-2 genes were detected. On the contrary, GmFAD8-2 transcript levels increased while GmFAD8-1 transcripts decreased during leaf development. Given this expression profile, our data suggested the existence of a temporal regulatory mechanism controlling ω-3 desaturases during leaf development in which the endoplasmic reticulum ω-3 desaturases would be more important in young leaves while plastidial ω-3 desaturases might contribute to 18:3(Δ9,12,15) production in mature leaves. Photosynthetic cell cultures showed 18:3(Δ9,12,15) levels similar to those from leaves. No changes in the 18:3(Δ9,12,15) content or expression of the ω-3 desaturase genes were detected along the cell culture cycle. A comparison of our data with those available in Arabidopsis or wheat suggested that the regulatory mechanism controlling the expression and activity of both endoplasmic reticulum and plastidial desaturases during leaf development might differ among plant species.

Characterization of variants in the glucosylceramide synthase gene and their association with type 1 Gaucher disease severity.

The extreme phenotypic variability of patients with Gaucher disease (GD) is not completely explained by glucocerebrosidase gene mutations. It has been proposed that genetic modifiers might influence GD phenotype. We examined seven polymorphisms of the glucosylceramide synthase gene (UGCG) and their correlation with severity of GD. Five UGCG variants were significantly associated with disease severity, according to the DS3 scoring system: c.-295C>T, c.-232_-241ins10, c.98+50A>G, c.98+68A>T, and c.861A>G. Heterozygous [N370S]+[L444P] patients with c.[-232_-241ins10;98+50G] haplotype had a significantly lower DS3 score in relation to patients carrying only one of these polymorphisms. Electrophoretic mobility shift assay analysis showed an increased nuclear protein binding ability for the G allele at the cDNA position c.98+50, as well as an altered pattern for the c.-232_-241ins10 allele. The promoter activity of the haplotypes decreased significantly with respect to wild type activity in HepG2 and COS-7 cells (-14% and -16% for the c.[-232_-241ins10;98+50A] haplotype, -44% and -25% for c.[-222nonins;98+50G] haplotypes, and -64% and -75% for c.[-232_-241ins10;98+50G] haplotype, respectively). These data indicate that the c.-232_-241ins10 and c.98+50A>G variants are modifying factors of GD severity, which can partly explain the variability in severity of the disease.

Bicyclic derivatives of L-idonojirimycin as pharmacological chaperones for neuronopathic forms of Gaucher disease.

New human ß-glucocerebrosidase (GCase) ligands with rigid 1,6-anhydro-ß-L-idonojirimycin cores have been designed with the aid of molecular modeling. Efficient pharmacological chaperones for the L444P (trafficking-incompetent) mutant GCase enzyme associated with type 2 and 3 Gaucher disease (GD) were identified.

Contribution of the different omega-3 fatty acid desaturase genes to the cold response in soybean.

This study analysed the contribution of each omega-3 desaturase to the cold response in soybean. Exposure to cold temperatures (5 °C) did not result in great modifications of the linolenic acid content in leaf membrane lipids. However, an increase in the GmFAD3A transcripts was observed both in plant leaves and soybean cells whereas no changes in GmFAD3B or GmFAD3C expression levels were detected. This increase was reversible and accompanied by the accumulation of an mRNA encoding a truncated form of GmFAD3A (GmFAD3A-T), which originated from alternative splicing of GmFAD3A in response to cold. When the expression of plastidial omega-3 desaturases was analysed, a transient accumulation of GmFAD7-2 mRNA was detected upon cold exposure in mature soybean trifoliate leaves while GmFAD7-1 transcripts remained unchanged. No modification of the GmFAD8-1 and GmFAD8-2 transcripts was observed. The functionality of GmFAD3A, GmFAD3B, GmFAD3C and GmFAD3A-T was examined by heterologous expression in yeast. No activity was detected with GmFAD3A-T, consistent with the absence of one of the His boxes necessary for desaturase activity. The linolenic acid content of Sacharomyces cerevisiae cells overexpressing GmFAD3A or GmFAD3B was higher when the cultures were incubated at cooler temperatures, suggesting that reticular desaturases of the GmFAD3 family, and more specifically GmFAD3A, may play a role in the cold response, even in leaves. The data point to a regulatory mechanism of omega-3 fatty acid desaturases in soybean affecting specific isoforms in both the plastid and the endoplasmic reticulum to maintain appropriate levels of linolenic acid under low temperature conditions.

The GmFAD7 gene family from soybean: identification of novel genes and tissue-specific conformations of the FAD7 enzyme involved in desaturase activity.

The FAD7 gene encodes a omega3 fatty acid desaturase which catalyses the production of trienoic fatty acids (TAs) in plant chloroplasts. A novel GmFAD7 gene (named GmFAD7-2) has been identified in soybean, with high homology to the previously annotated GmFAD7 gene. Genomic sequencing analysis together with searches at the soybean genome database further confirmed that both GmFAD7 genes were located in two different loci within the soybean genome, suggesting that the soybean omega3 plastidial desaturase FAD7 is encoded by two different paralogous genes. Both GmFAD7-1 and GmFAD7-2 genes were expressed in all soybean tissues examined, displaying their highest mRNA accumulation in leaves. This expression profile contrasted with GmFAD3A and GmFAD3B mRNA accumulation, which was very low in this tissue. These results suggested a concerted control of plastidial and reticular omega3 desaturase gene expression in soybean mature leaves. Analysis of GmFAD7 protein distribution in different soybean tissues showed that, in mature leaves, two bands were detected, coincident with the higher expression level of both GmFAD7 genes and the highest 18:3 fatty acid accumulation. By contrast, in seeds, where FAD7 activity is low, specific GmFAD7 protein conformations were observed. These GmFAD7 protein conformations were affected in vitro by changes in the redox conditions of thiol groups and iron availability. These results suggest the existence of tissue-specific post-translational regulatory mechanisms affecting the distribution and conformation of the FAD7 enzymes related with the control of its activity.

In situ molecular identification of the plastid omega3 fatty acid desaturase FAD7 from soybean: evidence of thylakoid membrane localization.

omega3 fatty acid desaturases are the enzymes responsible for the synthesis of trienoic fatty acids in plants. These enzymes have been mainly investigated using molecular, biochemical, and genetic approaches but very little is known about their subcellular distribution in plant cells. In this work, the precise subcellular localization of the omega3 desaturase FAD7 was elucidated by immunofluorescence and immunogold labeling using a monospecific GmFAD7 polyclonal antibody in soybean (Glycine max) photoautotrophic cell suspension cultures. Confocal analysis revealed the localization of the GmFAD7 protein within the chloroplast; i.e. signals from FAD7 and chlorophyll autofluorescence showed specific colocalization. Immunogold labeling was pursued on cryofixed and freeze-substituted samples for convenient preservation of antigenicity and ultrastructure of membrane subcompartments. Our data revealed that the FAD7 protein was preferentially localized in the thylakoid membranes. Biochemical fractionation of purified chloroplasts and western analysis of the subfractions further confirmed these results. These findings suggest that not only the envelope, but also the thylakoid membranes could be sites of lipid desaturation in higher plants.

A light-sensitive mechanism differently regulates transcription and transcript stability of omega3 fatty-acid desaturases (FAD3, FAD7 and FAD8) in soybean photosynthetic cell suspensions.

The omega3 fatty-acid desaturases: FAD7 and FAD8 (plastid) and FAD3 (reticular) are responsible for trienoic fatty-acid (TA) production in plants. The expression of these enzymes seemed to be regulated differently in response to light. Darkness leads to a decrease in total TA level. Under such conditions, FAD3 and FAD8 transcript levels were undetectable but increased after re-illumination concomitant with TA levels, indicating a transcriptional control. On the contrary, FAD7 transcript levels were similar to illuminated control cells, suggesting the presence of a post-transcriptional control mechanism. Furthermore, FAD7 mRNA stability increased dramatically in darkness. Analysis of FAD7 protein accumulation using specific antibodies revealed that FAD7 was very stable whatever the light or darkness conditions. These results indicate that FAD7 enzyme availability is not limiting for 18:3 production in darkness. Our data point to an additional post-translational regulatory mechanism that controls the activity of FAD7 in response to light.