Closing the Fibre Gap-The Impact of Combination of Soluble and Insoluble Dietary Fibre on Bread Quality and Health Benefits.

Dietary fibre (DF) is important for overall health and disease prevention. However, the intake of DF in Westernised countries is below the recommended level, largely due to the excessive consumption of low-fibre foods. Fortifying staple foods, such as bread, with dietary fibre ingredients is one approach to closing the fibre gap in our diet. However, incorporating purified and chemically modified fibre ingredients into food is challenging. This study unveils interactions between soluble-fermentable (arabinoxylan), insoluble-fermentable (resistant starch type IV) and insoluble-unfermentable (cellulose) fibre ingredients and their impact on bread quality using Response Surface Methodology. This resulted in an optimised mixture of these fibre ingredients that can coexist within a bread matrix while maintaining quality characteristics comparable to white wheat bread. The partial replacement of flour with fibre ingredients led to an interference with the gluten network causing a reduction in gluten strength by 12.4% and prolonged gluten network development time by 24.4% compared to the control (no fibre addition). However, the CO2 retention coefficient during dough fermentation was not affected by fibre ingredient inclusion. The fibre content of the white bread was increased by 128%, with only a marginal negative impact on bread quality. Additionally, the fibre-fortified bread showed a lower release of reducing sugars during in vitro starch digestion. This study illustrates the synergy of different types of fibre ingredients in a bread system to advance in closing the fibre gap.

Enhancing the Techno-Functional Properties of Lentil Protein Isolate Dispersions Using In-Line High-Shear Rotor-Stator Mixing.

In response to global challenges such as climate change and food insecurity, plant proteins have gained interest. Among these, lentils have emerged as a promising source of proteins due to their good nutritional profile and sustainability considerations. However, their widespread use in food products has been impeded by limited solubility. This study aimed to investigate the potential of high-shear mixing, a resource-efficient technique, to enhance lentil protein solubility and its functional properties. Red lentil protein isolate powders were rehydrated and subjected to a semi-continuous in-line high-shear treatment at 10,200 rpm for a timespan ranging from 0 to 15 min. The results highlighted a significant (p < 0.05) increase in solubility from 46.87 to 68.42% after 15 min of shearing and a reduction in particle size as a result of the intense shearing and disruption provided by the rotor and forced passage through the perforations of the stator. The volume-weighted mean diameter decreased from 5.13 to 1.72 µm after 15 min of shearing, also highlighted by the confocal micrographs which confirmed the breakdown of larger particles into smaller and more uniform particles. Rheological analysis indicated consistent Newtonian behaviour across all dispersions, with apparent viscosities ranging from 1.69 to 1.78 mPa.s. Surface hydrophobicity increased significantly (p < 0.05), from 830 to 1245, indicating exposure of otherwise buried hydrophobic groups. Furthermore, colloidal stability of the dispersion was improved, with separation rates decreasing from 71.23 to 24.16%·h-1. The significant enhancements in solubility, particle size reduction, and colloidal stability, highlight the potential of in-line high-shear mixing in improving the functional properties of lentil protein isolates for formulating sustainable food products with enhanced techno-functional properties.

Commercial Egg Replacers in Pound Cake Systems: A Comprehensive Analysis of Market Trends and Application.

Replacing eggs without influencing pound cakes' texture, appearance, and taste is challenging. Ovalbumin, the major protein in egg white, contributes to the structures of cakes by providing SH Groups that form a firm gel during baking. However, there is a shift in the consumers' behaviour regarding health, well-being, animal welfare standards, and environmental concerns. To meet upcoming trends and consumer needs, 102 egg replacement products were launched globally to the best of the authors' knowledge, with 20 of them advertised as suitable for baking applications. Ten locally available commercial egg replacers with a range of protein contents were chosen and applied in a pound cake model system to evaluate their functionality by evaluating cake and cake batter quality. Three different categories of egg replacements were chosen: replacers containing no protein (R1-R3), a low amount of protein (1-10 g/100 g; R4-R5), and a high amount of protein (>10 g/100 g; R6-R10). Those were compared to three control cakes containing powdered whole egg, fresh egg, and liquid whole egg. All the analysed egg replacers significantly differed from the control cakes, including low-protein egg replacement R4. Despite R4 achieving the highest specific volume (1.63 ± 0.07 mL/g) and comparable texture values, none of the examined egg replacers compared favourably with the egg control cakes regarding appearance, physical and textural properties, and nutritional value.

Effect of fibre fortification of low FODMAP pasta.

Irritable bowel syndrome (IBS) is a condition affecting the digestive system and can be triggered by several different factors, including diet. To ease symptoms of IBS, a diet low in fermentable oligo-, di-, monosaccharides and polyols (FODMAPs) is often recommended. Pasta, as a staple food in the Western World, is naturally high in FODMAPs. This study investigates the impact of insoluble and soluble dietary fibre ingredients in low-FODMAPs pasta. The assessment included physicochemical, sensory, and nutritional quality. Soluble fibre strengthened gluten network, which caused a lower cooking loss and a lower release of sugars during in vitro starch digestion. Insoluble fibre interfered with the gluten network development to a higher extent causing a higher sugar release during digestion. This study reveals the most suitable fibre ingredients for the development of pasta with elevated nutritional value and sensory characteristics compared to commercial products on the market. This type of pasta has a high potential of being suitable for IBS patients.

Impact of different fibre ingredients on a low-FODMAP biscuit model system.

Fermentable oligo-, di-, monosaccharides and polyols (FODMAPs) are carbohydrates which can cause symptoms of irritable bowel syndrome (IBS). Cereal-based products are high in FODMAPs, as they are part of the carbohydrate fraction in flour. Low-FODMAP products are starch-based which leads to a low dietary fibre content. Hence, the fortification with dietary fibre ingredients low in FODMAPs is essential. This study reveals the impact of three different fibre ingredients, resistant starch, cellulose, and arabinoxylan, and their interactions with each other in a low-FODMAP biscuit model system using response surface methodology. All fibre ingredients have an affinity to water which was further increased by their coexistence in the model system. Fibersym RW affected the biscuit hardness by its morphology and potential to recrystallise leading to a maximum inclusion level of 40%. VITACEL L 600-30 also increased biscuit hardness due to its plasticising character leading to a maximum inclusion of 20%. AgriFiber BFG mainly impacted the colour of the product restricting its inclusion to 2.3%. Additionally, it reduced the degree of starch digestibility of the biscuit by the formation of a film imbedding the starch granules and reducing enzyme attack. This research provides an in-depth insight into the integration potential of these fibre ingredients into a low-FODMAP biscuit, their interactions within the system and inclusion levels which allow their coexistence.

Brewers' Spent Grain: An Unprecedented Opportunity to Develop Sustainable Plant-Based Nutrition Ingredients Addressing Global Malnutrition Challenges.

There is an urgent requirement to minimize food waste and create more sustainable food systems that address global increases in malnutrition and hunger. The nutritional value of brewers' spent grain (BSG) makes it attractive for upcycling into value-added ingredients rich in protein and fiber having a lower environmental impact than comparable plant-based ingredients. BSG is predictably available in large quantities globally and can therefore play a role in addressing hunger in the developing world via the fortification of humanitarian food aid products. Moreover, addition of BSG-derived ingredients can improve the nutritional profile of foods commonly consumed in more developed regions, which may aid in reducing the prevalence of dietary-related disease and mortality. Challenges facing the widespread utilization of upcycled BSG ingredients include regulatory status, variability of raw material composition, and consumer perception as low-value waste products; however, the rapidly growing upcycled food market suggests increasing consumer acceptability and opportunities for significant market growth via effective new product innovation and communication strategies.

Plant-Based Alternatives to Cheese Formulated Using Blends of Zein and Chickpea Protein Ingredients.

In this study, zein protein isolate (ZPI) and chickpea protein concentrate (CPC) ingredients were used to formulate five plant-based cheese alternatives. Ingredient ratios based on protein contributions of 0:100, 25:75, 50:50, 75:25 and 100:0 from ZPI and CPC, respectively, were used. Formulations were developed at pH ~4.5, with a moisture target of 59%. Shea butter was used to target 15% fat, while tapioca starch was added to target the same carbohydrate content for all samples. Microstructural analysis showed differences among samples, with samples containing ZPI displaying a protein-rich layer surrounding the fat globules. Schreiber meltability and dynamic low amplitude oscillatory shear rheological analyses showed that increasing the proportion of ZPI was associated with increasing meltability and greater ability to flow at high temperatures. In addition, the sample containing only CPC showed the highest adhesiveness, springiness and cohesiveness values from the texture profile analysis, while the sample containing only ZPI exhibited the highest hardness. Furthermore, stretchability increased with increasing ZPI proportions. This work will help understanding of the role and potential of promising plant-protein-ingredient blends in formulating plant-based alternatives to cheese with desirable functional properties.

From Waste to Taste: Application of Fermented Spent Rootlet Ingredients in a Bread System.

The process of upcycling and incorporating food by-products into food systems as functional ingredients has become a central focus of research. Barley rootlets (BR) are a by-product of the malting and brewing industries that can be valorised using lactic acid bacteria fermentation. This research investigates the effects of the inclusion of unfermented (BR-UnF), heat-sterilised (BR-Ster), and five fermented BR ingredients (using Weissella cibaria MG1 (BR-MG1), Leuconostoc citreum TR116 (BR-TR116), Lactiplantibacillus plantarum FST1.7 (BR-FST1.7), Lactobacillus amylovorus FST2.11 (BR-FST2.11), and Limosilactobacillus reuteri R29 (BR-R29) in bread. The antifungal compounds in BR ingredients and the impact of BR on dough rheology, gluten development, and dough mixing properties were analysed. Additionally, their effects on the techno-functional characteristics, in vitro starch digestibility, and sensory quality of bread were determined. BR-UnF showed dough viscoelastic properties and bread quality comparable to the baker's flour (BF). BR-MG1 inclusion ameliorated bread specific volume and reduced crumb hardness. Breads containing BR-TR116 had comparable bread quality to BF, while the inclusion of BR-R29 substantially slowed microbial spoilage. Formulations containing BR-FST2.11 and BR-FST1.7 significantly reduced the amounts of sugar released from breads during a simulated digestion and resulted in a sourdough-like flavour profile. This study highlights how BR fermentation can be tailored to achieve desired bread characteristics.

Associating Compositional, Nutritional and Techno-Functional Characteristics of Faba Bean (Vicia faba L.) Protein Isolates and Their Production Side-Streams with Potential Food Applications.

Faba beans (Vicia faba L.) show exciting prospects as a sustainable source of protein and fibre, with the potential to transition to a more sustainable food production. This study reveals the compositional, nutritional and techno-functional characteristics of two protein isolates from faba beans (Vicia faba L.), a high-starch fraction and a high-fibre side-stream. During the analysis of those four ingredients, particular attention was paid to the isolates' protein profile and the side-streams' carbohydrate composition. The isoelectric precipitated protein isolate 1 showed a protein content of 72.64 ± 0.31% DM. It exhibited low solubility but superior digestibility and high foam stability. High foaming capacity and low protein digestibility were observed for protein isolate 2, with a protein content of 71.37 ± 0.93% DM. This fraction was highly soluble and consisted primarily of low molecular weight proteins. The high-starch fraction contained 83.87 ± 3.07% DM starch, of which about 66% was resistant starch. Over 65% of the high-fibre fraction was insoluble dietary fibre. The findings of this study provide a detailed understanding of different production fractions of faba beans, which is of great value for future product development.

Functional Properties of Brewer's Spent Grain Protein Isolate: The Missing Piece in the Plant Protein Portfolio.

Plant protein sources, as a part of developing sustainable food systems, are currently of interest globally. Brewer's spent grain (BSG) is the most plentiful by-product of the brewing industry, representing ~85% of the total side streams produced. Although nutritionally dense, there are very few methods of upcycling these materials. High in protein, BSG can serve as an ideal raw material for protein isolate production. This study details the nutritional and functional characteristics of BSG protein isolate, EverPro, and compares these with the technological performance of the current gold standard plant protein isolates, pea and soy. The compositional characteristics are determined, including amino acid analysis, protein solubility, and protein profile among others. Related physical properties are determined, including foaming characteristics, emulsifying properties, zeta potential, surface hydrophobicity, and rheological properties. Regarding nutrition, EverPro meets or exceeds the requirement of each essential amino acid per g protein, with the exception of lysine, while pea and soy are deficient in methionine and cysteine. EverPro has a similar protein content to the pea and soy isolates, but far exceeds them in terms of protein solubility, with a protein solubility of ~100% compared to 22% and 52% for pea and soy isolates, respectively. This increased solubility, in turn, affects other functional properties; EverPro displays the highest foaming capacity and exhibits low sedimentation activity, while also possessing minimal gelation properties and low emulsion stabilising activity when compared to pea and soy isolates. This study outlines the functional and nutritional properties of EverPro, a brewer's spent grain protein, in comparison to commercial plant protein isolates, indicating the potential for the inclusion of new, sustainable plant-based protein sources in human nutrition, in particular dairy alternative applications.

Co-fermentation of non-Saccharomyces yeasts with Lactiplantibacillus plantarum FST 1.7 for the production of non-alcoholic beer.

The non-alcoholic beer (NAB) sector has experienced steady growth in recent years, with breweries continuously seeking new ways to fulfil consumer demands. NAB can be produced by limited fermentation of non-Saccharomyces yeasts; however, beer produced in this manner is often critiqued for its sweet taste and wort-like off-flavours due to high levels of residual sugars and lack of flavour metabolites. The use of Lactobacillus in limited co-fermentation with non-Saccharomyces yeasts is a novel approach to produce NABs with varying flavour and aroma characteristics. In this study, lab-scale fermentations of Lachancea fermentati KBI 12.1 and Cyberlindnera subsufficiens C6.1 with Lactiplantibacillus plantarum FST 1.7 were performed and compared to a brewer's yeast, Saccharomyces cerevisiae WLP001. Fermentations were monitored for pH, TTA, extract reduction, alcohol production, and microbial cell count. The final beers were analysed for sugar and organic acid concentration, free amino nitrogen content (FAN), glycerol, and levels of volatile metabolites. The inability of the non-Saccharomyces yeasts to utilise maltotriose as an energy source resulted in extended fermentation times compared to S. cerevisiae WLP001. Co-fermentation of yeasts with lactic acid bacteria (LAB) resulted in a decreased pH, higher TTA and increased levels of lactic acid in the final beers. The overall acceptability of the NABs produced by co-fermentation was higher than or similar to that of the beers fermented with the yeasts alone, indicating that LAB fermentation did not negatively impact the sensory attributes of the beer. C. subsufficiens C6.1 and L. plantarum FST 1.7 NAB was characterised as fruity tasting with the significantly higher ester concentrations masking the wort-like flavours resulting from limited fermentation. NAB produced with L. fermentati KBI12.1 and L. plantarum FST1.7 had decreased levels of the undesirable volatile compound diacetyl and was described as 'fruity' and 'acidic', with the increased sourness masking the sweet, wort-like characteristics of the NAB. Moreover, this NAB was ranked as the most highly acceptable in the sensory evaluation. In conclusion, the limited co-fermentation of non-Saccharomyces yeasts with LAB is a promising strategy for the production of NAB.

Resistant Protein: Forms and Functions.

Several global health risks are related to our dietary lifestyle. As a consequence of the overconsumption of ultra-processed and highly digestible protein (150-200% of the recommended value), excess dietary proteins reach the colon, are hydrolysed to peptides and amino acids by bacterial proteases and fermented to various potentially toxic end products. A diet reformulation strategy with reduced protein content in food products appears to be the most effective approach. A potential approach to this challenge is to reduce food digestibility by introducing resistant protein into the diet that could positively influence human health and gut microbiome functionality. Resistant protein is a dietary constituent not hydrolysed by digestive enzymes or absorbed in the human small intestine. The chemical conformation and the amino acid composition strictly influence its structural stability and resistance to in vivo proteolysis and denaturation. Responding to the important gap in our knowledge regarding the digestibility performance of alternative proteins, we hypothesise that resistant proteins can beneficially alter food functionality via their role in improving metabolic properties and health benefits in human nutrition, similar to fibres and resistant starches. A multidisciplinary investigation of resistant protein will generate tremendous scientific impact for other interlinked societal, economic, technological and health and wellbeing aspects of human life.

Lentil-Based Yogurt Alternatives Fermented with Multifunctional Strains of Lactic Acid Bacteria-Techno-Functional, Microbiological, and Sensory Characteristics.

A milk-alternative produced from lentil protein isolate was fermented with three multifunctional strains of lactic acid bacteria, Leuconostoc citreum TR116, Leuconostoc pseudomesenteroides MP070, and Lacticaseibacillus paracasei FST 6.1. As a control, a commercial starter culture containing Streptococcus thermophilus was used. The metabolic performance of these strains and the techno-functional properties of the resulting yogurt alternatives (YA) were studied. Microbial growth was evaluated by cell counts, acidification, and carbohydrate metabolization. The structure of the YA was investigated by textural and rheological analyses and confocal laser scanning microscopy (CLSM). Production of antifungal compounds, the influence of fermentation on the content of FODMAPs, and typical metabolites were analyzed, and a sensory analysis was performed. The results revealed an exponential microbial growth in the lentil base substrate supported by typical acidification, which indicates a suitable environment for the selected strains. The resulting YA showed a gel-like texture typical for non-stirred yogurts, and high water holding capacity. The tested strains produced much higher levels of antifungal phenolic compounds than the commercial control and are therefore promising candidates as adjunct cultures for shelf-life extension. The Leuconostoc strains produced mannitol from fructose and could thus be applied in sugar-reduced YA. Preliminary sensory analysis showed high acceptance for YA produced with Lacticaseibacillus paracasei FST 6.1, and a yogurt-like flavor not statistically different to that produced by the control. Overall, each tested strain possessed promising functionalities with great potential for application in fermented plant-based dairy-alternatives.

Enzymatic Hydrolysis of Pulse Proteins as a Tool to Improve Techno-Functional Properties.

Pulse proteins are being increasingly investigated as nutritious and functional ingredients which could provide alternatives to animal proteins; however, pulse protein ingredients do not always meet the functionality requirements necessary for various applications. Consequently, enzymatic hydrolysis can be employed as a means of improving functional properties such as solubility, emulsifying, foaming, and gelling properties. This review aims to examine the current literature regarding modification of these properties with enzymatic hydrolysis. The effects of enzymatic hydrolysis on the functionality of pulse proteins generally varies considerably based on the enzyme, substrate, processing steps such as heat treatment, degree of hydrolysis, and pH. Differences in protease specificity as well as protein structure allow for a wide variety of peptide mixtures to be generated, with varying hydrophobic and electrostatic properties. Typically, the most significant improvements are seen when the original protein ingredient has poor initial functionality. Solubility is usually improved in the mildly acidic range, which may also correspond with improved foaming and emulsifying properties. More work should be carried out on the potential of enzymatic hydrolysis to modify gelation properties of pulse proteins, as the literature is currently lacking. Overall, careful selection of proteases and control of hydrolysis will be necessary to maximize the potential of enzymatic hydrolysis as a tool to improve pulse protein functionality and broaden the range of potential applications.

Resistant starch-An accessible fiber ingredient acceptable to the Western palate.

Dietary fiber intakes in Western societies are concerningly low and do not reflect global recommended dietary fiber intakes for chronic disease prevention. Resistant starch (RS) is a fermentable dietary fiber that has attracted research interest. As an isolated ingredient, its fine particle size, relatively bland flavor, and white appearance may offer an appealing fiber source to the Western palate, accustomed to highly refined, processed grains. This review aims to provide a comprehensive insight into the current knowledge (classification, production methods, and characterization methods), health benefits, applications, and acceptability of RS. It further discusses the present market for commercially available RS ingredients and products containing ingredients high in RS. The literature currently highlights beneficial effects for dietary RS supplementation with respect to glucose metabolism, satiety, blood lipid profiles, and colonic health. An exploration of the market for commercial RS ingredients indicates a diverse range of products (from isolated RS2, RS3, and RS4) with numerous potential applications as partial or whole substitutes for traditional flour sources. They may increase the nutritional profile of a food product (e.g., by increasing the fiber content and lowering energy values) without significantly compromising its sensory and functional properties. Incorporating RS ingredients into staple food products (such as bread, pasta, and sweet baked goods) may thus offer an array of nutritional benefits to the consumer and a highly accessible functional ingredient to be greater exploited by the food industry.

Arabinoxylans as Functional Food Ingredients: A Review.

The health benefits of fibre consumption are sound, but a more compressive understanding of the individual effects of different fibres is still needed. Arabinoxylan is a complex fibre that provides a wide range of health benefits strongly regulated by its chemical structure. Arabinoxylans can be found in various grains, such as wheat, barley, or corn. This review addresses the influence of the source of origin and extraction process on arabinoxylan structure. The health benefits related to short-chain fatty acid production, microbiota regulation, antioxidant capacity, and blood glucose response control are discussed and correlated to the arabinoxylan's structure. However, most studies do not investigate the effect of AX as a pure ingredient on food systems, but as fibres containing AXs (such as bran). Therefore, AX's benefit for human health deserves further investigation. The relationship between arabinoxylan structure and its physicochemical influence on cereal products (pasta, cookies, cakes, bread, and beer) is also discussed. A strong correlation between arabinoxylan's structural properties (degree of branching, solubility, and molecular mass) and its functionalities in food systems can be observed. There is a need for further studies that address the health implications behind the consumption of arabinoxylan-rich products. Indeed, the food matrix may influence the effects of arabinoxylans in the gastrointestinal tract and determine which specific arabinoxylans can be included in cereal and non-cereal-based food products without being detrimental for product quality.

FODMAP modulation as a dietary therapy for IBS: Scientific and market perspective.

A diet low in fermentable oligosaccharides, disaccharides, monosaccharides, and polyols (FODMAPs) is a promising therapeutic approach to reduce gastrointestinal symptoms associated with irritable bowel syndrome (IBS). However, a shift toward a more sustainable, healthy diet with higher inclusion of whole-grain cereals (i.e., wheat, rye, barley) and pulses, naturally rich in FODMAPs, poses a severe challenge for susceptible individuals. Dietary restriction of fermentable carbohydrates (commonly called the "low FODMAP diet") has received significant consideration. Hence, the development of functional low FODMAP products is emerging in food science and the food industry. In this review, we evaluate the most promising yet neglected (bio)-technological strategies adopted for modulating the FODMAP contents in complex food systems and the extent of their uptake in the global food market. We extensively investigated the global low FODMAP market, contrasted with the status quo in food science and discussed the key principles and concomitant challenges of targeted FODMAP reduction strategies. Powerful tools are available which are based either on the use of ingredients where FODMAPs have been physically removed (e.g., by membrane filtration) or biotechnologically reduced during the food processing, mediated by added enzymes, microbial enzymes during a fermentation process, and seed endogenous enzymes. However, <10% of the small market of functional products with a low FODMAP claim (total ∼800 products) used any of the targeted FODMAP reduction techniques. The global market is currently dominated by gluten-free products, which are naturally low in FODMAPs and characterized by inferior sensory attributes.

Isolation of the mustard Napin protein Allergen Sin a 1 and characterisation of its antifungal activity.

Proteins and peptides belonging to the plant immune system can possess natural antibacterial, antifungal and antiviral properties. Due to their broad range of activity and stability, they represent promising novel alternatives to commonly used antifungal agents to fight the emergence of resistant strains. An isolation protocol was optimised to target proteins found in plants' defence system, and it was applied to white mustard (Brassica hirta) seeds. Firstly, a ∼14 kDa protein with activity against S. cerevisiae was extracted and purified; secondly, the protein was identified as the mustard Napin protein named Allergen Sin a 1. Napin is the name given to seed storage (2S) albumin proteins belonging to the Brassicaceae family. While several Napins have been described for their antimicrobial potential, Sin a 1 has been mainly studied for its allergenic properties. The antimicrobial activity of Sin a 1 is described and characterised for the first time in this study; it possesses antifungal and antiyeast in vitro activity, but no antibacterial activity was recorded. The yeasts Zygosaccharomyces bailii Sa 1403 and Saccharomyces cerevisiae DSM 70449 along with the filamentous fungi Fusarium culmorum FST 4.05 were amongst the most senstitive strains to Sin a 1 (MICs range 3-6 µM). The antimicrobial mechanism of membrane permeabilisation was detected, and in general, the antifungal activity of Sin a 1 seemed to be expressed in a dose-dependent manner. Data collected confirmed Sin a 1 to be a stable and compact protein, as it displayed resistance to α-chymotrypsin digestion, heat denaturation and insensitivity to pH variations and the presence of salts. In addition, the protein did not show cytotoxicity towards mammalian cells.

Combining high-protein ingredients from pseudocereals and legumes for the development of fresh high-protein hybrid pasta: maintained technological quality and adequate sensory attributes.

BACKGROUND: The fortification of cereal foods, like pasta, with pseudocereal and legume ingredients promises a substantial improvement of their nutritional quality. However, partial replacement of wheat by pseudocereals and legumes in pasta formulations bears challenges regarding the products' technological and sensory quality. This study investigates the partial replacement of wheat semolina by a combination of high-protein ingredients (HPIs) from buckwheat, faba bean and lupin to reach a protein level of 20% of calories provided by protein. This high-protein hybrid pasta (HPHP) formulation was subjected to a thorough evaluation of technological quality characteristics and compared to regular wheat pasta and pasta formulations containing the single HPIs. Additionally, descriptive sensory profiling was performed to compare organoleptic properties of HPHP with regular wheat pasta. RESULTS: The quality of pasta formulations containing single HPIs was significantly reduced with regard to at least one of the determined quality characteristics. For the HPHP formulation containing all three HPIs, the technological quality was found to be equal to regular wheat pasta. No significant differences were detected for the most indicative quality characteristics cooking loss, firmness and stickiness. This was attributed primarily to compensating effects of the HPIs with respect to different quality characteristics. Sensory analysis revealed only slightly inferior overall quality of HPHP in comparison to regular wheat pasta, especially promoted by similar textural properties. CONCLUSION: The combination of selected HPIs offers the opportunity to produce high-protein hybrid pasta with technological and sensory quality similar to regular wheat pasta at a level of wheat semolina replacement of 25%. © 2020 Society of Chemical Industry.

Physicochemical and nutritional properties of high protein emulsion-type lupin-based model milk alternatives: effect of protein source and homogenization pressure.

BACKGROUND: Plant-based milk alternatives are becoming more popular. However, many are low in nutrients, particularly protein. More attention is being given to plant protein isolates / concentrates as potential ingredients in high-protein milk alternative formulations. RESULTS: The effect of lupin protein source on the physicochemical, functional, and nutritional characteristics of model milk alternatives was investigated. Milk alternatives were produced with either blue lupin or white lupin protein isolate, formulated to contain similar levels of protein and fat as low-fat cow's milk. Nutritional composition and predicted glycemic properties were measured. The effect of homogenization pressure on the physicochemical properties and storage stability was also assessed, with cow's milk and soy milk alternative analyzed for comparison. Both blue and white lupin milk alternatives were high in protein, low in fermentable oligo-, di- and monosaccharides, and polyols (FODMAPs), and had a low predicted glycemic index. White lupin milk alternatives had smaller particle size as well as greater stability, with less creaming compared to blue lupin milk alternatives, although the former showed slightly higher sediment layers. Increasing homogenization pressure from 180 to 780 bar resulted in smaller particle size, lower separation rate, and greater foamability for both blue and white lupin milk alternatives. White lupin milk alternative homogenized at 780 bar was found to be the most stable product, with a similar separation rate to cow's milk. CONCLUSIONS: These results indicate that protein source and processing can influence functional properties significantly along with product stability, and this is an important consideration when formulating high-protein milk alternatives. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.