RESUMEN
The surge in greenhouse gas emissions, predominantly in the form of carbon dioxide (CO2) spurred by the Industrial Revolution, has surpassed the critical threshold of 400 ppm, fueling global warming, ocean acidification, and climate change. To mitigate the adverse effects of these emissions and limit the global temperature rise to below 2 °C, the ambitious target of achieving net zero emissions by 2050 was established in the Paris Agreement. Current state-of-the-art technologies, such as amine scrubbing, remain problematic owing to their high energy requirements, susceptibility to corrosion, and other operational challenges. Owing to the lack of suitable technologies coupled with escalating energy demand, there is still a significant amount of carbon dioxide being released into the atmosphere. Accordingly, there is an urgent need for the development of alternative technologies that offer high efficiency, low energy consumption, cost-effective installation, and operation. In this review, we delve into the emerging technologies poised to address these challenges, evaluating their maturity levels in comparison to existing commercially available solutions. Furthermore, we provide a brief overview of ongoing efforts aimed at commercializing these innovative technologies.
RESUMEN
Cellulose nanocrystals (CNCs) are bio-based, rod-like, high-aspect-ratio nanoparticles with high stiffness and strength and are widely used as a reinforcing nanofiller in polymer nanocomposites. However, due to hydrogen-bond formation between the large number of hydroxyl groups on their surface, CNCs are prone to aggregate, especially in nonpolar polymer matrices. One possibility to overcome this problem is to graft polymers from the CNCs' surfaces and to process the resulting "hairy nanoparticles" (HNPs) into one-component nanocomposites (OCNs) in which the polymer matrix and CNC filler are covalently connected. Here, we report OCNs based on HNPs that were synthesized by grafting gradient diblock copolymers onto CNCs via surface-initiated atom transfer radical polymerization. The inner block (toward the CNCs) is composed of poly(methyl acrylate) (PMA), and the outer block comprises a gradient copolymer rich in poly(methyl methacrylate) (PMMA). The OCNs based on such HNPs microphase separate into a rubbery poly(methyl acrylate) phase that dissipates mechanical energy and imparts toughness, a glassy PMMA phase that provides strength and stiffness, and well-dispersed CNCs that further reinforce the materials. This design afforded OCNs that display a considerably higher stiffness and strength than reference diblock copolymers without the CNCs. At the same time, the extensibility remains high and the toughness is increased up to 5-fold relative to the reference materials.
Asunto(s)
Acrilatos , Nanocompuestos , Nanopartículas , Celulosa/química , Polimetil Metacrilato , Polímeros/química , Nanopartículas/química , Nanocompuestos/químicaRESUMEN
We report the synthesis of two-dimensional and three-dimensional porous polyphenylenes (2D/3D-pPPs) via the Diels-Alder cycloaddition polymerization reaction. The resulting 2D and 3D-pPPs showed surface areas up to 1553 m2 g-1, pore volumes of 1.45 cm3 g-1 and very high H2 uptake capacities of 7.4 and 7.1 wt% at 77 K, respectively, along with a competitive high-pressure CO2 and CH4 uptake performance.
RESUMEN
We addressed the poor interfacial stability of the Li metal anode in Li-S batteries through molecular regulation of electrolytes using arylthiol additives with various numbers of anchoring sites. The dual functional tetrathiol additive markedly enhanced the Li anode interfacial stability, controlled the sulfur redox kinetics and suppressed side reactions towards polysulfides, thus leading to an improved capacity retention of 70% after 500 cycles at 1 C.
Asunto(s)
Electrólitos , Litio , Suministros de Energía Eléctrica , Electrodos , AzufreRESUMEN
Porous organic polymers (POPs) have gained tremendous attention owing to their chemical tunability, stability and high surface areas. Whereas there are several examples of fully conjugated two-dimensional (2D) POPs, three-dimensional (3D) ones are rather challenging to realize in the absence of structural templates. Herein, we report the base-catalyzed direct synthesis of a fully conjugated 3D POPs, named benzyne-derived polymers (BDPs), containing biphenylene and tetraphenylene moieties starting from a simple bisbenzyne precursor, which undergoes [2+2] and [2+2+2+2] cycloaddition reactions to form BDPs primarily composed of biphenylene and tetraphenylene moieties. The resulting polymers exhibited ultramicroporous structures with surface areas up to 544â m2 g-1 and very high CO2 /N2 selectivities.
RESUMEN
Switchable gas separation membranes are intriguing systems for regulating the transport properties of gases. However, existing stimuli-responsive gas separation membranes suffer from either very slow response times or require high energy input for switching to occur. Accordingly, herein, we introduced light-switchable polymeric carbon nitride (pCN) gas separation membranes with fast response times prepared from melamine precursor through in-situ formation and deposition of pCN onto a porous support using chemical vapor deposition. Our systematic analysis revealed that the gas transport behavior upon light irradiation is fully governed by the polarizability of the permeating gas and its interaction with the charged pCN surface, and can be easily tuned either by controlling the power of the light and/or the duration of irradiation. We also demonstrated that gases with higher polarizabilities such as CO2 can be separated from gases with lower polarizability like H2 and He effectively with more than 22% increase in the gas/CO2 selectivity upon light irradiation. The membranes also exhibited fast response times (<1 s) and can be turned "on" and "off" using a single light source at 550 nm.
RESUMEN
The development of new solvents is imperative in lithium metal batteries due to the incompatibility of conventional carbonate and narrow electrochemical windows of ether-based electrolytes. Whereas the fluorinated ethers showed improved electrochemical stabilities, they can hardly solvate lithium ions. Thus, the challenge in electrolyte chemistry is to combine the high voltage stability of fluorinated ethers with high lithium ion solvation ability of ethers in a single molecule. Herein, we report a new solvent, 2,2-dimethoxy-4-(trifluoromethyl)-1,3-dioxolane (DTDL), combining a cyclic fluorinated ether with a linear ether segment to simultaneously achieve high voltage stability and tune lithium ion solvation ability and structure. High oxidation stability up to 5.5 V, large lithium ion transference number of 0.75 and stable Coulombic efficiency of 99.2% after 500 cycles proved the potential of DTDL in high-voltage lithium metal batteries. Furthermore, 20 µm thick lithium paired LiNi0.8Co0.1Mn0.1O2 full cell incorporating 2 M LiFSI-DTDL electrolyte retained 84% of the original capacity after 200 cycles at 0.5 C.
RESUMEN
Tetraoxa[8]circulenes (TOCs) are a class of hetero[8]circulenes featuring a planar cyclooctatetraene core with a mixed aromatic/antiaromatic motif that governs their electronic properties. Polymeric TOCs (pTOCs) have been the subject of several computational simulations because they are predicted to be low-band-gap semiconductors, but they have not been available synthetically yet. Here, we report the first example of pTOCs, a new family of porous semiconductors, synthesized under ionothermal conditions through the intermolecular cyclization of 1,4,5,8-anthracene tetrone. pTOCs are porous, with surface areas up to 1656â m2 g-1 , and exhibit light-switchable and tunable semiconducting properties.
RESUMEN
Porous graphene membranes have emerged as promising alternatives for gas-separation applications due to their atomic thickness enabling ultrahigh permeance, but they suffer from low gas selectivity. Whereas decreasing the pore size below 3 nm is expected to increase the gas selectivity due to molecular sieving, it is rather challenging to generate a large number of uniform small pores on the graphene surface. Here, a pore-narrowing approach via gold deposition onto porous graphene surface is introduced to tune the pore size and thickness of the membrane to achieve a large number of small pores. Through the systematic approach, the ideal combination is determined as pore size below 3 nm, obtained at the thickness of 100 nm, to attain high selectivity and high permeance. The resulting membrane shows a H2 /CO2 separation factor of 31.3 at H2 permeance of 2.23 × 105 GPU (1 GPU = 3.35 × 10-10 mol s-1 m-2 Pa-1 ), which is the highest value reported to date in the 105 GPU permeance range. This result is explained by comparing the predicted binding energies of gas molecules with the Au surface, -5.3 versus -21 kJ mol-1 for H2 and CO2 , respectively, increased surface-gas interactions and molecular-sieving effect with decreasing pore size.
RESUMEN
The use of reactive molten salts, i.e., ZnCl2, as a soft template and a catalyst has been actively investigated in the preparation of covalent triazine frameworks (CTFs). Although the soft templating effect of the salt melt is more prominent at low temperatures, close to the melting point of ZnCl2, leading to the formation of abundant micropores, a significant mesopore formation is observed that is due to the partial carbonization and other side reactions at higher temperatures (>400 °C). Evidently, high-temperature synthesis of CTFs in various eutectic salt mixtures of ZnCl2 with alkali metal chloride salts also leads to mesopore formation. We reasoned that using the isocyanate moieties instead of cyano groups in the monomer, 1,4-phenylene isocyanate, could enable efficient interactions between carbonyl moieties and alkali metal ions to realize efficient salt templating to form covalent isocyanurate frameworks (CICFs). In this direction, the trimerization of 1,4-phenylene diisocyanate was carried out under ionothermal conditions at different reaction temperatures using ZnCl2 (CICF) and the eutectic salt mixture of KCl/NaCl/ZnCl2 (CICF-KCl/NaCl) as the reactive solvents. We observed notable differences in the morphologies of the two polymers, whereas CICF showed irregular-shaped micrometer-sized particles, the CICF-KCl/NaCl exhibited a filmlike morphology. Moreover, favorable ion-dipole interactions between alkali metal cations and oxygen atoms of the monomer facilitated two-dimensional growth and the formation of a purely microporous framework in the case of CICF-KCl/NaCl along with a near theoretical retention of the nitrogen content at 500 °C. The CICF-KCl/NaCl showed a BET surface area of 590 m2 g-1 along with a CO2 uptake capacity of 5.9 mmol g-1 at 273 K and 1.1 bar because of its high microporosity and nitrogen content. On the contrary, in the absence of alkali metal ions, CICF showed high mesopore content and a moderate CO2 uptake capacity. This study underscores the importance of the strength of the interactions between the salts and the monomer in the ionothermal synthesis to control the morphology, porosity, and gas uptake properties of the porous organic polymers.
RESUMEN
Dimensionality plays an important role in the charge transport properties of organic semiconductors. Although three-dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three-dimensional organic polymers is challenging. Now, the synthesis of a three-dimensional π-conjugated porous organic polymer (3D p-POP) using catalyst-free Diels-Alder cycloaddition polymerization followed by acid-promoted aromatization is presented. With a surface area of 801â m2 g-1 , full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10-4 â S cm-1 upon treatment with I2 vapor, the 3D p-POP is the first member of a new class of permanently porous 3D organic semiconductors.