RESUMEN
BACKGROUND: Pyocyanin is a blue pigment produced by Pseudomonas aeruginosa. Due to its unique redox properties over the last decade, it has gained more and more interest as a utile chemical. Nevertheless, it remains a rather costly reagent. It was previously shown that the production of pyocyanin can be enhanced by employing various methods. Among them are using statistical methods for planning the experiments or exposing bacterial cultures to stressors such as nanoparticles dosed in sublethal concentrations, e.g. zinc oxide nanoparticles. RESULTS: The Design of Experiment (DoE) methodology allowed for calculating the optimal process temperature and nanoparticle concentration to intensify pyocyanin production. Low concentrations of the nanoparticles (6.06 µg/mL) and a temperature of 32â enhanced pyocyanin production, whereas higher concentrations of nanoparticles (275.75 µg/mL) and higher temperature stimulated biomass production and caused the abolishment of pyocyanin production. Elevated pigment production in zinc oxide nanoparticles-supplemented media was sustained in the scaled-up culture. Conducted analyses confirmed that observed stimulation of pyocyanin production is followed by higher membrane potential, altered gene expression, generation of reactive oxygen species, and accumulation of zinc in the cell's biomass. CONCLUSIONS: Pyocyanin production can be steered using ZnO nanoparticles. Elevated production of pyocyanin due to exposure to nanoparticles is followed by the number of changes in physiology of bacteria and is a result of the cellular stress. We showed that the stress response of bacteria can be optimised using statistical methods and result in producing the desired metabolite more effectively.
Asunto(s)
Pseudomonas aeruginosa , Piocianina , Óxido de Zinc , Piocianina/metabolismo , Óxido de Zinc/química , Óxido de Zinc/farmacología , Pseudomonas aeruginosa/metabolismo , Pseudomonas aeruginosa/efectos de los fármacos , Nanopartículas/química , Nanopartículas del Metal/química , Especies Reactivas de Oxígeno/metabolismo , Temperatura , Estrés Fisiológico , BiomasaRESUMEN
The presented study proposes an efficient utilization of a common Thymus serpyllum L. (wild thyme) plant as a highly potent biosorbent of Cu(II) and Pb(II) ions and the efficient interaction of the copper-laden plant with two opportunistic bacteria. Apart from biochars that are commonly used for adsorption, here we report the direct use of native plant, which is potentially interesting also for soil remediation. The highest adsorption capacity for Cu(II) and Pb(II) ions (qe = 12.66 and 53.13 mg g-1, respectively) was achieved after 10 and 30 min of adsorption, respectively. Moreover, the Cu-laden plant was shown to be an efficient antibacterial agent against the bacteria Escherichia coli and Staphylococcus aureus, the results being slightly better in the former case. Such an activity is enabled only via the interaction of the adsorbed ions effectively distributed within the biological matrix of the plant with bacterial cells. Thus, the sustainable resource can be used both for the treatment of wastewater and, after an effective embedment of metal ions, for the fight against microbes.
Asunto(s)
Antibacterianos , Escherichia coli , Staphylococcus aureus , Antibacterianos/farmacología , Antibacterianos/química , Antibacterianos/aislamiento & purificación , Antibacterianos/metabolismo , Escherichia coli/efectos de los fármacos , Staphylococcus aureus/efectos de los fármacos , Adsorción , Metales Pesados/química , Metales Pesados/metabolismo , Metales Pesados/farmacología , Thymus (Planta)/química , Plomo/química , Plomo/metabolismo , Cobre/química , Cobre/farmacología , Cobre/metabolismo , Pruebas de Sensibilidad MicrobianaRESUMEN
Urinary tract infections (UTIs) are among the most common bacterial infections affecting millions worldwide. The increasing emergence of antibiotic-resistant bacteria has become a serious concern in managing UTIs. Therefore, there is a growing interest in using bacteriophages as an alternative or adjunct therapy for UTIs. Bacteriophages are viruses that infect and kill bacteria, making them a promising tool for treating UTIs caused by antibiotic-resistant bacteria. This article provides a quick outlook on using bacteriophages to treat UTIs. We summarize the current understanding of the biology of bacteriophages, the challenges associated with developing phage-based therapies, and the promising results of several case reports and clinical trials. We also highlight the potential of phage therapy as a valuable tool in the fight against antibiotic-resistant UTIs. This quick outlook on a bacteriophage-based approach for treating UTIs offers a timely and informative summary of the current research in this field.
Asunto(s)
Infecciones Bacterianas , Bacteriófagos , Infecciones Urinarias , Humanos , Antibacterianos/uso terapéutico , Infecciones Urinarias/microbiología , Infecciones Bacterianas/microbiología , BacteriasRESUMEN
The ambiguous nature of pyocyanin was noted quite early after its discovery. This substance is a recognized Pseudomonas aeruginosa virulence factor that causes problems in cystic fibrosis, wound healing, and microbiologically induced corrosion. However, it can also be a potent chemical with potential use in a wide variety of technologies and applications, e.g. green energy production in microbial fuel cells, biocontrol in agriculture, therapy in medicine, or environmental protection. In this mini-review, we shortly describe the properties of pyocyanin, its role in the physiology of Pseudomonas and show the ever-growing interest in it. We also summarize the possible ways of modulating pyocyanin production. We underline different approaches of the researchers that aim either at lowering or increasing pyocyanin production by using different culturing methods, chemical additives, physical factors (e.g. electromagnetic field), or genetic engineering techniques. The review aims to present the ambiguous character of pyocyanin, underline its potential, and signalize the possible further research directions.
Asunto(s)
Agricultura , Fibrosis Quística , Humanos , Corrosión , Ingeniería , Ingeniería Genética , PiocianinaRESUMEN
An effort to prepare different non-stoichiometric CuxSy compounds starting from elemental precursors using mechanochemistry was made in this study. However, out of the 7 stoichiometries tested, it was only possible to obtain three phases: covellite CuS, chalcocite Cu2S and digenite Cu1.8S and their mixtures. To obtain the digenite phase with the highest purity, the Cu : S stoichiometric ratio needed to be fixed at 1.6 : 1. The reaction between copper and sulfur was completed within a second range, however, milling was performed for up to 15 minutes until the equilibrium in phase composition between digenite and covellite was reached. The possibility of preparing the product in a 300 g batch by eccentric vibratory milling in 30 minutes was successfully verified at the end. The estimated crystallite sizes for the digenite Cu1.8S obtained via lab-scale and scalable experiments were around 12 and 17 nm, respectively. The obtained products were found to be efficient photocatalysts under visible light irradiation in the presence of hydrogen peroxide, being capable of the complete degradation of the Methyl Orange dye in a concentration of 10 mg L-1 in 2 hours. Finally, the antibacterial potential of both lab-scale and large-scale industrial products was proven and, regardless of the manufacturing scale, the nanoparticles retained their properties against bacterial cells.
Asunto(s)
Cobre , Nanopartículas , Cobre/química , Antibacterianos/farmacología , Nanopartículas/química , Sulfuros/químicaRESUMEN
An electromagnetic field (EMF) has been shown to have various stimulatory or inhibitory effects on microorganisms. Over the years, growing interest in this topic led to numerous discoveries suggesting the potential applicability of EMF in biotechnological processes. Among these observations are stimulative effects of this physical influence resulting in intensified biomass production, modification of metabolic activity, or pigments secretion. In this review, we present the current state of the art and underline the main findings of the application of EMF in bioprocessing and their practical meaning in process engineering using examples selected from studies on bacteria, archaea, microscopic fungi and yeasts, viruses, and microalgae. All biological data are presented concerning the classification of EMF. Furthermore, we aimed to highlight missing parts of contemporary knowledge and indicate weak spots in the approaches found in the literature.
Asunto(s)
Campos Electromagnéticos , Microalgas , Microalgas/metabolismo , Biotecnología , Bioingeniería , BiomasaRESUMEN
The growing interest in bacteriophages and antibiotics' combined use poses new challenges regarding this phenomenon's accurate description. This study aimed to apply the PhageScore methodology to assess the phage-antibiotic combination activity in liquid bacterial culture. For this purpose, previously described Acinetobacter infecting phages vB_AbaP_AGC01, Aba-1, and Aba-4 and antibiotics (gentamicin, ciprofloxacin, meropenem, norfloxacin, and fosfomycin) were used to obtain a lysis curve of bacteriophages under antibiotic pressure. The experimental data were analyzed using the Fractional Inhibitory Concentration Index (FICI) and PhageScore methodology. The results obtained by this method clearly show differences between phage lytic activity after antibiotic addition. Thus, we present the potential use of the PhageScore method as a tool for characterizing the phage antibiotic synergy in liquid culture. Further, the optimization of the PhageScore for this purpose can help compare antibiotics and their outcome on bacteriophage lytic activity.
Asunto(s)
Acinetobacter baumannii , Bacteriófagos , Antibacterianos/farmacología , CiprofloxacinaRESUMEN
CdS nanoparticles were successfully synthesized using cadmium acetate and sodium sulfide as Cd and S precursors, respectively. The effect of using sodium thiosulfate as an additional sulfur precursor was also investigated (combined milling). The samples were characterized by XRD, Raman spectroscopy, XPS, UV-Vis spectroscopy, PL spectroscopy, DLS, and TEM. Photocatalytic activities of both CdS samples were compared. The photocatalytic activity of CdS, which is produced by combined milling, was superior to that of CdS, and was obtained by an acetate route in the degradation of Orange II under visible light irradiation. Better results for CdS prepared using a combined approach were also evidenced in photocatalytic experiments on hydrogen generation. The antibacterial potential of mechanochemically prepared CdS nanocrystals was also tested on reference strains of E. coli and S. aureus. Susceptibility tests included a 24-h toxicity test, a disk diffusion assay, and respiration monitoring. Bacterial growth was not completely inhibited by the presence of neither nanomaterial in the growth environment. However, the experiments have confirmed that the nanoparticles have some capability to inhibit bacterial growth during the logarithmic growth phase, with a more substantial effect coming from CdS nanoparticles prepared in the absence of sodium thiosulfate. The present research demonstrated the solvent-free, facile, and sustainable character of mechanochemical synthesis to produce semiconductor nanocrystals with multidisciplinary application.
RESUMEN
Pseudomonas aeruginosa is a producer of desired secondary metabolites, including pyocyanin. Potential uses of this pigment urge a search for improved production methods. Recent trends in bioprocessing show the potential of the use of electromagnetic fields (EMFs) to influence the growth of microorganisms and even modulate the concentration of bioproducts. Here, we aimed at assessing the influence of rotating magnetic field (RMF) and static magnetic field (SMF) on pyocyanin production, growth rate, and respiration of P. aeruginosa. Moreover, exposure time to EMFs (2, 6, and 12 h) and culture volume (10 and 50 ml) were initially assessed. P. aeruginosa was cultivated in magnetically assisted reactors with 5 and 50 Hz RMF (magnetic induction of 24.32 and 42.64 mT, respectively) and SMF (-17.37 mT). Growth kinetics was assessed with Gompertz equation. The viability was tested using resazurin assay, whereas pyocyanin production by chloroform-HCl methodology. The growth of P. aeruginosa was slightly stimulated by exposure to a RMF with 50 Hz (108% related to the control) and significantly by SMF (132% related to the control), while RMF 5 Hz exposure prolonged the time of inflection (in comparison to RMF 50 Hz and SMF). The 6-h exposure to EMFs resulted in the highest pyocyanin production in comparison to the control, indicating a relationship between exposure time and product concentration. Moreover, cultures led in smaller volumes produced more pyocyanin. Our findings show that the use of different EMF types, frequency, and exposition time and volume could be used interchangeably to obtain different bioprocess aims.
RESUMEN
Hydrodynamic conditions are critical in bioprocessing because they influence oxygen availability for cultured cells. Processes in typical laboratory bioreactors need optimization of these conditions using mixing and aeration control to obtain high production of the desired bioproduct. It could be done by experiments supported by computational fluid dynamics (CFD) modeling. In this work, we characterized parameters such as mixing time, power consumption and mass transfer in a 2 L bioreactor. Based on the obtained results, we chose a set of nine process parameters to test the hydrodynamic impact on a selected bioprocess (mixing in the range of 0-160 rpm and aeration in the range of 0-250 ccm). Therefore, we conducted experiments with P. aeruginosa culture and assessed how various hydrodynamic conditions influenced biomass, pyocyanin and rhamnolipid production. We found that a relatively high mass transfer of oxygen (kLa = 0.0013 s-1) connected with intensive mixing (160 rpm) leads to the highest output of pyocyanin production. In contrast, rhamnolipid production reached maximal efficiency under moderate oxygen mass transfer (kLa = 0.0005 s-1) and less intense mixing (in the range of 0-60 rpm). The results indicate that manipulating hydrodynamics inside the bioreactor allows control of the process and may lead to a change in the metabolites produced by bacterial cells.
RESUMEN
The main objectives of this study were to isolate bacteria from soil chronically contaminated with polycyclic aromatic hydrocarbons (PAHs), develop an autochthonous microbial consortium, and evaluate its ability to degrade PAHs in their native contaminated soil. Strains with the best bioremediation potential were selected during the multi-stage isolation process. Moreover, to choose bacteria with the highest bioremediation potential, the presence of PAH-degrading genes (pahE) was confirmed and the following tests were performed: tolerance to heavy metals, antagonistic behavior, phytotoxicity, and antimicrobial susceptibility. In vitro degradation of hydrocarbons led to the reduction of the total PAH content by 93.5% after the first day of incubation and by 99.22% after the eighth day. Bioremediation experiment conducted in situ in the contaminated area resulted in the average reduction of the total PAH concentration by 33.3% after 5 months and by over 72% after 13 months, compared to the concentration recorded before the intervention. Therefore, this study implicates that the development of an autochthonous microbial consortium isolated from long-term PAH-contaminated soil has the potential to enhance the bioremediation process.
Asunto(s)
Restauración y Remediación Ambiental/métodos , Consorcios Microbianos/fisiología , Hidrocarburos Policíclicos Aromáticos/metabolismo , Bacterias/metabolismo , Biodegradación Ambiental , Hidrocarburos/metabolismo , Metales Pesados/metabolismo , Consorcios Microbianos/genética , Filogenia , Hidrocarburos Policíclicos Aromáticos/efectos adversos , Suelo , Microbiología del Suelo , Contaminantes del Suelo/metabolismoRESUMEN
Here, we designed paper sheets coated with chitosan, bacterial cellulose (nanofibers), and ZnO with boosted antibacterial and mechanical activity. We investigated the compositions, with ZnO exhibiting two different sizes/shapes: (1) rods and (2) irregular sphere-like particles. The proposed processing of bacterial cellulose resulted in the formation of nanofibers. Antimicrobial behavior was tested using E. coli ATCC® 25922™ following the ASTM E2149-13a standard. The mechanical properties of the paper sheets were measured by comparing tearing resistance, tensile strength, and bursting strength according to the ISO 5270 standard. The results showed an increased antibacterial response (assigned to the combination of chitosan and ZnO, independent of its shape and size) and boosted mechanical properties. Therefore, the proposed composition is an interesting multifunctional mixture for coatings in food packaging applications.
Asunto(s)
Biopolímeros/química , Biopolímeros/farmacología , Celulosa/química , Quitosano/química , Nanocompuestos/química , Embalaje de Productos/métodos , Óxido de Zinc/química , Antiinfecciosos , Celulosa/ultraestructura , Escherichia coli , Pruebas Mecánicas , Nanopartículas del Metal/química , Nanopartículas del Metal/ultraestructura , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Nanocompuestos/ultraestructura , Nanofibras/química , Nanofibras/ultraestructura , Propiedades de Superficie , Resistencia a la Tracción , Difracción de Rayos XRESUMEN
In this study, the core-shell silica nanospheres modified with titanium dioxide were tested in the photocatalytic decomposition of dyes. The presented data underlines the advantages and shortcomings in the potential application of silica-based catalysts to neutralize organic pollutants. During the photocatalytic reaction in distilled water, catalysts showed decreased efficiency due to a carbon layer deposited on its surface. This finding set an additional goal to investigate the possibility of regenerating the photocatalyst. Studies have shown that the catalyst could be successfully reused following the thermal removal of deposited carbon.Furthermore, the reactivated silica-titania catalysts exhibited comparable photocatalytic performance to the newly made nanomaterial. Surprisingly, catalyst application in the river water eventually resulted in the permanent deactivation of silica-titania nanospheres, which was caused by the interchangeable silica dissolution/precipitation process on the surface of the studied nanomaterial. In environmental water, silica dissolves and precipitates on titanium dioxide's surface, blocking the interaction between organic compounds and TiO2. The deactivation occurring in the environmental samples is irreversible. In distilled water, the decomposition of organic compounds leads to photocatalysts' deactivation by forming a carbon layer on their surface. Reactivation of the silica-based photocatalyst after distilled water is achievable by annealing at a high temperature. In light of our findings, the combination of the photocatalytic properties of TiO2and the silica template shows no prospects in the purification of polluted waste or environmental water.
RESUMEN
The cultivation of bacteria sets a ground for studying biological processes in many scientific disciplines. The development of the bacterial population is commonly described with three factors that can be used to evaluate culture conditions. However, selecting only one of them for the optimization protocol is rather problematic and may lead to unintended errors. Therefore, we proposed a novel mathematical approach to obtain a single factor that could be used as the objective function to evaluate the whole growth dynamic and support the optimization of the biomass production process. The sigmoidal-shape curve, which is the commonly used function to plot the amount of biomass versus time, was the base for the mathematical analysis. The key process parameters, such as maximal specific growth rate and lag-phase duration were established with the use of mathematical coefficients of the model curve and combined to create the single growth parameter. Moreover, this parameter was used for the exemplary optimization of the cultivation conditions of Klebsiella pneumoniae that was cultured to be further used in the production of lytic bacteriophages. The proposed growth parameter was successfully validated and used to calculate the optimal process temperature of the selected bacterial strain. The obtained results indicated that the proposed mathematical approach could be effortlessly adapted for a precise evaluation of growth curves.
RESUMEN
Pseudomonas aeruginosa is a bacterium of high clinical and biotechnological importance thanks to its high adaptability to environmental conditions. The increasing incidence of antibiotic-resistant strains has created a need for alternative methods to increase the chance of recovery in infected patients. Various nanomaterials have the potential to be used for this purpose. Therefore, we aimed to study the physiological response of P. aeruginosa PAO1 to titanium dioxide/silica nanotubes. The results suggest that UV light-irradiated nanomaterial triggers strong agglomeration in the studied bacteria that was confirmed by microscopy, spectrophotometry, and flow cytometry. The effect was diminished when the nanomaterial was applied without initial irradiation, with UV light indicating that the creation of reactive oxygen species could play a role in this phenomenon. The nanocomposite also affected biofilm formation ability. Even though the biomass of biofilms was comparable, the viability of cells in biofilms was upregulated in 48-hour biofilms. Furthermore, from six selected genes, the mexA coding efflux pump was upregulated, which could be associated with an interaction with TiO2. The results show that titanium dioxide/silica nanotubes may alter the physiological and metabolic functions of P. aeruginosa PAO1.
Asunto(s)
Nanocompuestos/administración & dosificación , Nanotubos/química , Pseudomonas aeruginosa/efectos de los fármacos , Dióxido de Silicio/química , Proteínas de la Membrana Bacteriana Externa/genética , Biopelículas/efectos de los fármacos , Biopelículas/crecimiento & desarrollo , Resistencia a Múltiples Medicamentos/efectos de los fármacos , Resistencia a Múltiples Medicamentos/genética , Regulación Bacteriana de la Expresión Génica/efectos de los fármacos , Humanos , Proteínas de Transporte de Membrana/genética , Pruebas de Sensibilidad Microbiana , Microscopía Electrónica de Transmisión , Nanocompuestos/efectos de la radiación , Nanocompuestos/ultraestructura , Nanotubos/ultraestructura , Infecciones por Pseudomonas/microbiología , Pseudomonas aeruginosa/genética , Pseudomonas aeruginosa/fisiología , Espectrometría por Rayos X , Rayos Ultravioleta , Difracción de Rayos XRESUMEN
The emerging trend towards the reduction of SO2 in winemaking has created a need to look for alternative methods to ensure the protection of wine against the growth of undesired species of microorganisms and to safely remove wine microorganisms. This study describes the possible application of silica nanospheres as a wine stabilisation agent, with Oenococcus oeni (DSM7008) as a model strain. The experiment was conducted firstly on model solutions of phosphate-buffered saline and 1% glucose. Their neutralising effect was tested under stirring with the addition of SiO2 (0.1, 0.25, and 0.5 mg/mL). Overall, the highest concentration of nanospheres under continuous stirring resulted in the greatest decrease in cell counts. Transmission electron microscope (TEM) and scanning electron microscopy (SEM) analyses showed extensive damage to the bacterial cells after stirring with silica nanomaterials. Then, the neutralising effect of 0.5 mg/mL SiO2 was tested in young red wine under stirring, where cell counts were reduced by over 50%. The obtained results suggest that silica nanospheres can serve as an alternative way to reduce or substitute the use of sulphur dioxide in the microbial stabilisation of wine. In addition, further aspects of following investigations should focus on the protection against enzymatic and chemical oxidation of wine.
RESUMEN
Nanoparticles were proposed as antibacterial cement admixtures for the production of cement-based composites. Nevertheless, the standards for evaluation of such admixtures still do not indicate which model organisms to use, particularly in regard to the further application of material. Apart from the known toxicity of nanomaterials, in the case of cement-based composites there are limitations associated with the mixing and dispersion of nanomaterials. Therefore, four nanooxides (Al2O3, CuO, Fe3O4, and ZnO) and seven microorganisms were tested to initially evaluate the applicability of nanooxides in relation to their further use in cement-based composites. Studies of nanoparticles included chemical analysis, microbial growth kinetics, 4- and 24 h toxicity, and biofilm formation assay. Nanooxides showed toxicity against microorganisms in the used concentration, although the populations were able to re-grow. Furthermore, the effect of action was variable even between strains from the same genus. The effect of nanoparticles on biofilms depended on the used strain. Gathered results show several problems that can occur while studying nanoparticles for specific further application. Proper protocols for nanomaterial dispersion prior the preparation of cement-based composites, as well as a standardized approach for their testing, are the fundamental issues that have to be resolved to produce efficient composites.
RESUMEN
The recycling of waste glass is a major problem for municipalities worldwide. The problem concerns especially colored waste glass which, due to its low recycling rate as result of high level of impurity, has mostly been dumped into landfills. In recent years, a new use was found for it: instead of creating waste, it can be recycled as an additive in building materials. The aim of the study was to evaluate the possibility of manufacturing sustainable and self-cleaning cement mortars with use of commercially available nanomaterials and brown soda-lime waste glass. Mechanical and bactericidal properties of cement mortars containing brown soda-lime waste glass and commercially available nanomaterials (amorphous nanosilica and cement containing nanocrystalline titanium dioxide) were analyzed in terms of waste glass content and the effectiveness of nanomaterials. Quartz sand is replaced with brown waste glass at ratios of 25%, 50%, 75% and 100% by weight. Study has shown that waste glass can act as a successful replacement for sand (up to 100%) to produce cement mortars while nanosilica is incorporated. Additionally, a positive effect of waste glass aggregate for bactericidal properties of cement mortars was observed.