Toxic and non-toxic cyanobacterial biomass as a resource for sustainable agriculture: A lettuce cultivation experiment.

Cyanobacteria represent a promising resource for sustainable agriculture, as they have demonstrated the ability to restore soil fertility even after death and decay. However, several cyanobacteria can also release secondary metabolites, such as cyanotoxins, which may compromise the quality of agricultural products and pose a potential risk to human health. Depending on the concentration of exposure, few studies reported deleterious effects on plant species when irrigated with cylindrospermopsin (CYN) contaminated water, impairing plant growth and leading to food product contamination, while other studies show promoting effects on plant yield. To evaluate the potential of cyanobacterial biomass (cyanotoxin-containing or not) as a sustainable resource for soil amendment, biostimulants or fertilizers for lettuce cultivation, a study was carried out that consisted of the culture of lettuce plants under controlled conditions, in soil: (1) with no extra nutrient addition (control) and supplemented with 0.6 g of freeze-dried Raphidiopsis raciborskii biomass of (2) a non-CYN-producing strain, (3) a CYN-producing strain, and (4) the same CYN-producing strain pasteurized. Results showed no significant differences in photosystem II efficiency with the amendment addition. On the contrary, shoot fresh weight significantly increased in lettuce plants grown with the cyanobacterial biomass addition, especially in condition (3). In addition, there were significant differences in mineral concentrations in lettuce leaves after the cyanobacterial biomass addition, such as K, Na, Ca, P, Mg, Mn, Zn, Cu, Mo, and Co. CYN accumulation was detected under conditions (3) and (4), with concentrations observed in descending order from roots > soil > shoot. Nevertheless, the CYN concentration in edible tissues did not exceed the WHO-proposed tolerable daily intake of 0.03 µg/kg/day. These findings suggest that incorporating cyanobacterial biomass as a soil amendment, biostimulant or fertilizer for lettuce cultivation, even with trace amounts of CYN (1-40 µg/g), may enhance plant yield without leading to cyanotoxin accumulation in edible tissues above the WHO-recommended tolerable daily intake.

Biomonitoring of firefighters' exposure to priority pollutant metal(loid)s during wildland fire combat missions: Impact on urinary levels and health risks.

Wildland firefighters are exposed to metal(loid)s released during wildfires through vegetation combustion, which also promotes remobilization of accumulated anthropogenic metal(loid)s. Studies biomonitoring metal(loid)s exposure promoted exclusively by wildfire suppression activities are lacking. This work aimed to characterize, for the first time, the impact of real-life wildland firefighting operations on urinary levels of priority pollutant metal(loid)s [14 included in ATSDR, 11 in USEPA, and 4 in Human Biomonitoring for Europe Initiative priority lists] in firefighters. Spot urines were sampled pre-exposure (105 non-smokers, 76 smokers) and post-exposure to firefighting activities (20 non-smokers, 25 smokers); among those, paired samples were collected from 14 non-smoking and 24 smoking firefighters. Smokers displayed significantly higher baseline levels of zinc (28 %), lithium (29 %), cadmium (55 %), rubidium (13 %), and copper (20 %) than non-smokers. Following wildfire suppression, the concentration of the WHO potentially toxic metal(loid)s rose from 2 % to 3 % in smokers and 2 % to 5 % in non-smokers (up to 4 % for all firefighters and up to 5 % in paired samples). Levels of nickel (33-53 %), antimony (45-56 %), and cesium (40-47 %) increased significantly post-exposure in non-smokers (in all firefighters and in paired samples), whose urinary concentrations were generally more impacted by wildfire emissions than those of smokers. Arsenic (80 %) displayed the only significant increase post-exposure in smokers, being the best discriminant of exposure to wildfire emissions in these subjects. Significant positive correlations were found for age and/or career length with cadmium, lead, barium, strontium, and mercury, and for body mass index with arsenic. The reference/guidance values were exceeded for arsenic, zinc, cesium, nickel, antimony, cadmium, lead, thallium, mercury, copper, and cobalt in 1-90 % of firefighters suggesting augmented health risks due to wildfire combating and emphasizing the need of mitigation strategies. This study also provides biomonitoring data to help setting reference values for the occupationally exposed part of population.

Comparison of Upper Central Incisor Torque in the ClinCheck® with and without CBCT Integration: A Cross-Sectional Study.

Controlling root movement is one of the greatest challenges in orthodontic treatment with aligners, like Invisalign® aligners. Cone Beam Computed Tomography (CBCT) integration into ClinCheck®, enabling bone and root visualisation, allows a more accurate follow-up of the teeth position. This study aims to compare torque measurements of the upper central incisors with and without CBCT and relate them to the upper incisor inclination and facial biotype. In a sample of 70 teeth, torque measurements were obtained by importing images into AutoCAD® software (version 2024). The angle between the tooth's long axis with CBCT duplicate and the tooth's long axis without CBCT was obtained to assess the difference. Statistically significant differences between torque measurements with and without CBCT were found, as well as between these measurements and the inclination of the upper incisors. No statistically significant differences were found among the facial biotypes. The average values of 27.8° ± 3.4° and 21.5° ± 3.2° were obtained for the angle between the axes. Torque without CBCT was lower than torque with CBCT, for the same tooth. The angle between the axes had a similar mean for both teeth. CBCT integration into ClinCheck® allows for a more correct torque measurement.

Riding the Digital Wave of Exercise, Health, and Sports Training Optimization.

The digital era is opening countless possibilities in "Sport Sciences"; "Public, Environmental, and Occupational Health"; and "Physical Therapy, Sports Therapy, and Rehabilitation" areas [...].

Characterization of Wildland Firefighters' Exposure to Coarse, Fine, and Ultrafine Particles; Polycyclic Aromatic Hydrocarbons; and Metal(loid)s, and Estimation of Associated Health Risks.

Firefighters' occupational activity causes cancer, and the characterization of exposure during firefighting activities remains limited. This work characterizes, for the first time, firefighters' exposure to (coarse/fine/ultrafine) particulate matter (PM) bound polycyclic aromatic hydrocarbons (PAHs) and metal(loid)s during prescribed fires, Fire 1 and Fire 2 (210 min). An impactor collected 14 PM fractions, the PM levels were determined by gravimetry, and the PM-bound PAHs and metal(loid)s were determined by chromatographic and spectroscopic methodologies, respectively. Firefighters were exposed to a total PM level of 1408.3 and 342.5 µg/m3 in Fire 1 and Fire 2, respectively; fine/ultrafine PM represented more than 90% of total PM. Total PM-bound PAHs (3260.2 ng/m3 in Fire 1; 412.1 ng/m3 in Fire 2) and metal(loid)s (660.8 ng/m3 versus 262.2 ng/m3), distributed between fine/ultrafine PM, contained 4.57-24.5% and 11.7-12.6% of (possible/probable) carcinogenic PAHs and metal(loid)s, respectively. Firefighters' exposure to PM, PAHs, and metal(loid)s were below available occupational limits. The estimated carcinogenic risks associated with the inhalation of PM-bound PAHs (3.78 × 10-9 - 1.74 × 10-6) and metal(loid)s (1.50 × 10-2 - 2.37 × 10-2) were, respectively, below and 150-237 times higher than the acceptable risk level defined by the USEPA during 210 min of firefighting activity and assuming a 40-year career as a firefighter. Additional studies need to (1) explore exposure to (coarse/fine/ultrafine) PM, (2) assess health risks, (3) identify intervention needs, and (4) support regulatory agencies recommending mitigation procedures to reduce the impact of fire effluents on firefighters.

The Relationship between Personality Profiles and the Esthetic Perception of Orthodontic Appliances.

Introduction: In orthodontics, patients' esthetic expectations involve the final esthetic result as well as the treatment's appliance choice. Personality traits can influence patients' perception, treatment modality selection, expectations, compliance, and satisfaction with the treatment outcome, although there are very few studies on this interconnection between personality and orthodontic appliances. Objective: The aim of this study is to evaluate the relationship between personality traits and the esthetic perception of different orthodontic appliances. Materials and Methods: The online questionnaire is composed of three parts: (1) sociodemographic variables; (2) questions on the esthetic perception of different orthodontic appliances; (3) general personality assessment via the NEO-FFI. A total of 461 questionnaires were accepted. Results: There were statistically significant differences between laypeople and professionals related to assessing smiles and the need for orthodontic treatment. Laypeople identified a statistically significant relationship between personality traits and orthodontic appliances, in which esthetic perception is associated with high traits of agreeableness and openness. Neuroticism is most associated with orthodontic treatment with fixed appliances, which are the most conventional. Conclusions: Professionals tend to have a more critical judgment than laypeople as far as esthetics is concerned. Personality traits play an important role in esthetic perception and may influence orthodontic treatment.

Relationships between trace elements and cognitive and depressive behaviors in sprague dawley and wistar albino rats.

Introduction: This study investigates the effects of social isolation on mental health and cognitive functions in Sprague Dawley (SD) and Wistar Albino (WIS) rat strains, prompted by the heightened awareness of such impacts amid the COVID-19 pandemic. This study aims to explore the impact of social isolation on memory, learning, and behavioral changes in middle-aged SD and WIS rat strains and to investigate cortical trace element levels, seeking potential correlations between these levels and the observed behavioral responses to social isolation. Methods: Four groups of 14-month-old male rats were established: control and isolated SDs and WIS rats (CONT-SD, ISO-SD, CONT-WIS, ISO-WIS). Morris Water Maze and Porsolt Forced Swimming tests were conducted for behavioral assessment. Following behavioral tests, rats were sacrificed under general anesthesia, and cortices were isolated for analysis of macro and trace element levels (ICP/MS). Results: In behavioral tests, CONT-SD rats exhibited superior performance in the Morris Water Maze test compared to CONT-WIS rats, but displayed increased depressive behaviors following social isolation, as evident in the Porsolt Forced Swimming test (p < 0.05). ISO-SD rats showed elevated levels of Co and Cu, along with reduced levels of Cs and As, compared to ISO-WIS rats. Moreover, isolation resulted in decreased Cu and Mo levels but increased Rb levels in WIS rats. Comparison of trace element levels in naïve groups from different strains revealed lower Zn levels in the WIS group compared to SD rats. Discussion: The findings suggest that the SD strain learns faster, but is more susceptible to depression after isolation compared to the WIS strain. Increased Co and Cu levels in ISO-SD align with previous findings, indicating potential trace element involvement in stress responses. Understanding these mechanisms could pave the way for preventive treatment strategies or therapeutic targets against the consequences of stressors, contributing to research and measures promoting a balanced diet to mitigate neurobehavioral abnormalities associated with social isolation in the future.

Efficiency and Predictability of Coronal Maxillary Expansion Repercussion with the Aligners System: A Retrospective Study.

The Invisalign® system (SmartForce® G8) aims to guarantee aesthetics and provide good orthodontic treatment results. Dentoalveolar expansion is possible with clear aligners and can be used to correct dentoalveolar crossbite, resolve crowding or modify the arch shape. Despite the treatment's effectiveness, there is still disagreement among professionals concerning its true clinical potential. This study aimed to analyze the effectiveness and predictability of coronal tooth expansion movement in permanent dentition in patients who had completed the first phase of treatment with Invisalign® orthodontic aligners. MATERIALS AND METHODS: The tooth movement tables of 75 previously selected cases were analyzed in terms of dental-arch width and expansion efficiency, through the Invisalign® platform, considering the pre-treatment (T0), planned treatment (TP) and post-treatment models (T1) using ClinCheck Pro® 6.0 software. All patients were treated by an orthodontic specialist and Invisalign® Diamond Provider in a private practice (T.P.). RESULTS: Difference between T1 and T0: for each maxillary and mandibular measurement, there was a statistically significant difference between pre- and post-aligner treatment values. The greatest amount of expansion occurred in both the upper and the lower premolars. Difference between TP and T1: for each maxillary measurement, statistically significant differences were verified for the molar and canine. At the mandibular level, statistically significant differences were only verified in the first molar. CONCLUSIONS: The Invisalign® clear aligners are effective for simultaneous intra-arch expansion in both jaws.

Essential Trace Elements Status in Portuguese Pregnant Women and Their Association with Maternal and Neonatal Outcomes: A Prospective Study from the IoMum Cohort.

Cobalt (Co), copper (Cu), manganese (Mn), molybdenum (Mo), and zinc (Zn) are essential trace elements (ETEs) and important cofactors for intermediary metabolism or redox balance. These ETEs are crucial during pregnancy, their role on specific pregnancy outcomes is largely unknown. This prospective study (#NCT04010708) aimed to assess urinary levels of these ETEs in pregnancy and to evaluate their association with pregnancy outcomes. First trimester pregnant women of Porto and Lisbon provided a random spot urine sample, and sociodemographic and lifestyle data. Clinical data were obtained from clinical records. Urinary ETEs were quantified by inductively coupled plasma mass spectrometry (ICP-MS). A total of 635 mother:child pairs were included. Having urinary Zn levels above the 50th percentile (P50) was an independent risk factor for pre-eclampsia (PE) (aOR [95% CI]: 5.350 [1.044-27.423], p = 0.044). Urinary Zn levels above the P50 decreased the risk of small for gestational age (SGA) birth head circumference (aOR [95% CI]: 0.315 [0.113-0.883], p = 0.028), but it increased the risk SGA length (aOR [95% CI]: 2.531 [1.057-6.062], p = 0.037). This study may provide valuable information for public health policies related to prenatal nutrition, while informing future efforts to de-fine urinary reference intervals for ETEs in pregnant women.

Biodistribution and intestinal inflammatory response following voluntary oral intake of silver nanoparticles by C57BL/6J mice.

Silver nanoparticles (AgNP) are among the most widely commercialized nanomaterials globally, with applications in medicine and the food industry. Consequently, the increased use of AgNP in the food industry has led to an unavoidable rise  in human exposure to these nanoparticles. Their widespread use raises concerns about potential hazards to human health, specifically their intestinal pro-inflammatory effects. Thus, the main objective of this study was to evaluate the biological effects of two subacute doses of 5 nm polyvinylpyrrolidone (PVP)-AgNP in C57BL/6J mice. One mg/kg body weight or 10 mg/kg bw was provided once a day for 14 days, using a new technology (HaPILLness) that allows voluntary, stress-free, and accurate oral dosing. It was observed that after oral ingestion, while AgNP is biodistributed throughout the entire organism, most of the ingested dose is excreted in the feces. The passage and accumulation of AgNP throughout the intestine instigated a prominent inflammatory response, marked by significant histological, vascular, and cellular transformations. This response was driven by the activation of the nuclear factor-кB (NF-кB) inflammatory pathway, ultimately leading to the generation of multiple cytokines and chemokines.

Uncovering the effects of copper feed supplementation on the selection of copper-tolerant and antibiotic-resistant Enterococcus in poultry production for sustainable environmental practices.

The use of antibiotics in animal production is linked to the emergence and spread of antibiotic-resistant bacteria, a threat to animal, environmental and human health. Copper (Cu) is an essential element in poultry diets and an alternative to antibiotics, supplementing inorganic or organic trace mineral feeds (ITMF/OTMF). However, its contribution to select multidrug-resistant (MDR) and Cu tolerant Enterococcus, a bacteria with a human-animal-environment-food interface, remains uncertain. We evaluated whether feeding chickens with Cu-ITMF or Cu-OTMF contributes to the selection of Cu tolerant and MDR Enterococcus from rearing to slaughter. Animal faeces [2-3-days-old (n = 18); pre-slaughter (n = 16)] and their meat (n = 18), drinking-water (n = 14) and feed (n = 18) from seven intensive farms with ITMF and OTMF flocks (10.000-64.000 animals each; 2019-2020; Portugal) were sampled. Enterococcus were studied by cultural, molecular and whole-genome sequencing methods and Cu concentrations by ICP-MS. Enterococcus (n = 477; 60 % MDR) were identified in 80 % of the samples, with >50 % carrying isolates resistant to tetracycline, quinupristin-dalfopristin, erythromycin, streptomycin, ampicillin or ciprofloxacin. Enterococcus with Cu tolerance genes, especially tcrB ± cueO, were mainly found in faeces (85 %; E. faecium/E. lactis) of ITMF/OTMF flocks. Similar occurrence and load of tcrB ± cueO Enterococcus in the faeces was detected throughout the chickens' lifespan in the ITMF/OTMF flocks, decreasing in meat. Most of the polyclonal MDR Enterococcus population carrying tcrB ± cueO or only cueO (67 %) showed a wild-type phenotype (MICCuSO4 ≤ 12 mM) linked to absence of tcrYAZB or truncated variants, also detected in 85 % of Enterococcus public genomes from poultry. Finally, < 65 µg/g Cu was found in all faecal and meat samples. In conclusion, Cu present in ITMF/OTMF is not selecting Cu tolerant and MDR Enterococcus during chickens' lifespan. However, more studies are needed to assess the minimum concentration of Cu required for MDR bacterial selection and horizontal transfer of antibiotic resistance genes, which would support sustainable practices mitigating antibiotic resistance spread in animal production and the environment beyond.

Accuracy of Invisalign® on Upper Incisors: A Systematic Review.

The current systematic review appraises the effectiveness of the types of tooth movements performed with Invisalign® clear aligner on the maxillary incisors. An electronic literature search of published trials was performed through PubMed, LILACS, Scopus, Cochrane Library, and Web of Science databases, and selected journals, from 2009 to 2020. Out of 291 references, five relevant publications were identified for analysis: four studies were performed retrospectively and one prospectively, all non-randomized. Despite the limited set of selected articles, the sample size is significant, with 148 subjects included in the reviewed studies involving the orthodontic treatment of upper incisors. We concluded that movements with the Invisalign® clear aligner on the upper incisors present distinct accuracy, possibly related with movement complexity; intrusion of the incisors has low accuracy (in some cases, 0% of accuracy was reported when the tooth extruded), while incisor extrusion exhibit some of the highest accuracy values reported in the included studies (45%-142%, when the achieved movement was greater than the predicted). Besides, axial (i.e., torque and tip) and horizontal (i.e., translation and rotation) movements are usually effective, with accuracy values between 39%-156% and 42%-79%, respectively. Overall, we determined that the efficiency of aligner to reach the desired movements in the upper incisors was low, as often refinements were required in the included studies. The use of aligner features must be more often considered to improve movement accuracy.

Occlusal Changes with Clear Aligners and the Case Complexity Influence: A Longitudinal Cohort Clinical Study.

BACKGROUND: Clear aligners (CA) are used 22 h daily, creating a bite-block effect. This work aims to (i) analyze occlusal changes before the beginning of treatment, after the first set of CA and after the use of additional aligners; (ii) compare planned occlusal contacts with the ones obtained after the first set of CA; (iii) analyze the occlusal changes occurred after reaching the orthodontic goals after 3 months of using CA only at night; (iv) evaluate and characterize which tooth movements did not allow the treatment to be completed at the end of the first set of aligners, and finally (v) verify the possible relation between the changes in occlusal contact and areas and parameters such as case complexity and facial biotype. MATERIALS AND METHODS: A quantitative, comparative, and observational longitudinal cohort study design was implemented to evaluate the clinical data and the complexity levels of cases receiving CA. A non-probabilistic and convenience sample of 82 individuals was recruited. The orthodontic malocclusion traits were classified as simple, moderate, or complex corrections based on the basis of the Align® recommendations with the Invisalign® evaluation tool. According to the Invisalign® criteria, patients need only one complex problem for their case to be classified as complex. Meshlab® v. 2022.02, ClinCheck® version Pro 6.0, My-Itero® version 2.7.9.601 5d plus, and IBM® SPSS Statistics software (Statistical Program for Social Sciences), version 27.0 for Windows were the software® used. RESULTS: A statistically significant decrease in area and occlusal contacts number were observed from before the start of orthodontic treatment (T0) to the end of treatment (T1). The changes in the occlusal area (from T0 to T1) were statistically different between hyperdivergent (28.24 [15.51-40.91]) and hypodivergent (16.23 [8.11-24.97]) biotypes (p = 0.031). A significant difference between the hyperdivergent (4.0 [2.0-5.0]) and normodivergent (5.5 [4.0-8.0]) group was found in T1 for the anterior contacts (p = 0.044). Anterior contacts obtained were significantly higher than the planned (p = 0.037) Between T1 and T2 statistically significant increases of occlusal areas, posterior and total contacts were observed. CONCLUSIONS: Occlusal contact and area were decreased, either at the end of the first set or after the use of additional aligners. Anterior occlusal contacts obtained were higher than planned as opposed to posterior occlusal contacts obtained. The hardest tooth movements to achieve to complete the treatment were distalization, rotation, and posterior extrusion. After completing orthodontic treatment (T1) to 3 months after (T2) using additional aligners only at night, posterior occlusal contacts were significantly increased, which could be due to the natural settling of the teeth in this period.

Bioenergetic Analysis and Fatigue Assessment During the Fran Workout in Experienced Crossfitters.

AIM: To quantify the physiological demands and impact of muscle function t of the Fran workout, one of the most popular CrossFit benchmarks. METHODS: Twenty experienced CrossFitters-16 male: 29 (6) years old and 4 female: 26 (5) years old- performed 3 rounds (with 30-s rests in between) of 21-21, 15-15, and 9-9 front squats to overhead press plus pull-up repetitions. Oxygen uptake and heart rate were measured at baseline, during the workout, and in the recovery period. Rating of perceived exertion, blood lactate, and glucose concentrations were assessed at rest, during the intervals, and in the recovery period. Muscular fatigue was also monitored at rest and at 5 minutes, 30 minutes, and 24 hours postexercise. Repeated-measures analysis of variance was performed to compare time points. RESULTS: Aerobic (52%-29%) and anaerobic alactic (30%-23%) energy contributions decreased and the anaerobic lactic contribution increased (18%-48%) across the 3 rounds of the Fran workout. Countermovement jump height decreased by 8% (-12 to -3) mean change (95% CI), flight duration by 14% (-19 to -7), maximum velocity by 3% (-5 to -0.1), peak force 4% (-7 to -0.1), and physical performance (plank prone 47% [-54 to -38]) were observed. CONCLUSIONS: It appears that the Fran workout is a physically demanding activity that recruits energy from both aerobic and anaerobic systems. This severe-intensity workout evokes substantial postexercise fatigue and corresponding reduction in muscle function.

Further Evidence on Trace Element Imbalances in Haemodialysis Patients-Paired Analysis of Blood and Serum Samples.

Previous studies have shown that haemodialysis patients have an increased risk of trace element imbalances. Most studies have determined the concentration of trace elements in serum only, but most trace elements are not uniformly distributed between plasma and blood cells, which justifies separate analysis of the different compartments. In this study, we determined both the serum and whole blood concentration of a wide panel of trace elements (Li, B, Mn, Co, Ni, Cu, Zn, Se, Rb, Sr, Mo, Cd, Pb) in haemodialysis patients and compared them with those of a control group. Whole blood and serum samples were collected during routine laboratory testing of patients undergoing chronic haemodialysis. For comparison purposes, samples from individuals with normal renal function were also analysed. Statistically significant differences (p < 0.05) were found between the two groups for whole blood concentrations of all analysed elements except Zn (p = 0.347). For serum, the difference between groups was statistically significant for all elements (p < 0.05). This study confirms that patients on haemodialysis tend to present significant trace element imbalances. By determining the concentration of trace elements in both whole blood and serum, it was shown that chronic haemodialysis may affect intra- and extracellular blood compartments differently.

Determination by ICP-MS of Essential and Toxic Trace Elements in Gums and Carrageenans Used as Food Additives Commercially Available in the Portuguese Market.

Gums and carrageenans are food additives widely used in food preparations to improve texture and as viscosifiers. Although they are typically added in small amounts, nowadays people tend to use more and more pre-prepared food. In this work, the content of a wide panel of trace elements in commercial products were analyzed. Carrageenans and gums (n = 13) were purchased in the Portuguese market and were from European suppliers. Samples were solubilized by closed-vessel microwave-assisted acid digestion and analyzed by ICP-MS. Globally, the content of essential trace elements decreased in the following order: Fe (on average, on the order of several tens of µg/g) > Mn > Zn > Cr > Cu > Co > Se > Mo (typically < 0.1 µg/g), while the content of non-essential/toxic trace elements decreased in the following order: Al > Sr > Rb > As > Li > Cd > Pb > Hg. The consumption of these food additives can significantly contribute to the daily requirements of some essential trace elements, namely Cr and Mo. The toxic trace elements Cd, As, Pb, and Hg were below the EU regulatory limits in all analyzed samples. Additional research is needed to define the potential risk of introducing toxic trace elements into food products through the use of these additives.

Serum Iodine and Bromine in Chronic Hemodialysis Patients-An Observational Study in a Cohort of Portuguese Patients.

Background: Patients on chronic hemodialysis therapy are at high risk of disturbances in trace element status due to both the underlying disease and the hemodialysis process itself. Data on iodine and bromine levels in these patients are scarce. Methods: Using an ICP-MS analytical procedure, serum iodine and bromine levels were determined in a cohort (n = 57) of end-stage renal disease patients on chronic hemodialysis. The results were compared with those of a control group (n = 59). Results: Hemodialysis patients presented serum iodine levels within the normal range, slightly lower than in controls, but without reaching a statistically significant difference (67.6 ± 17.1 µg/L vs. 72.2 ± 14.8 µg/L; p = 0.1252). In contrast, serum bromine levels were much lower in patients (1086 ± 244 µg/L vs. 4137 ± 770 µg/L; p < 0.0001), at values only about 26% of the values observed in controls. Conclusions: Hemodialysis patients had normal serum iodine levels, but highly decreased serum bromine levels. The clinical significance of this finding requires further investigation, but it may be associated with sleep disturbances and fatigue that affect hemodialysis patients.

ChatGPT in forensic sciences: a new Pandora's box with advantages and challenges to pay attention.

ChatGPT is a variant of the generative pre-trained transformer (GPT) language model that uses large amounts of text-based training data and a transformer architecture to generate human-like text adjusted to the received prompts. ChatGPT presents several advantages in forensic sciences, namely, constituting a virtual assistant to aid lawyers, judges, and victims in managing and interpreting forensic expert data. But what would happen if ChatGPT began to be used to produce forensic expertise reports? Despite its potential applications, the use of ChatGPT and other Large Language Models and artificial intelligence tools in forensic writing also poses ethical and legal concerns, which are discussed in this perspective together with some expected future perspectives.

Association of trace element status in COVID-19 patients with disease severity.

Caused by the new SARS-CoV-2 coronavirus, COVID-19 (coronavirus disease 2019) evolves with clinical symptoms that vary widely in severity, from mild symptoms to critical conditions, which can even result in the patient's death. A critical aspect related to an individual response to SARS-CoV-2 infection is the competence of the immune system, and it is well known that several trace elements are essential for an adequate immune response and have anti-inflammatory and antioxidant properties that are of particular importance in fighting infection. Thus, it is widely accepted that adequate trace element status can reduce the risk of SARS-CoV-2 infection and disease severity. In this study, we evaluated the serum levels of Cu, Zn, Se, Fe, I and Mg in patients (n = 210) with clinical conditions of different severity ("mild", "moderate", "severe" and "exitus letalis", i.e., patients who eventually died). The results showed significant differences between the four groups for Cu, Zn, Se and Fe, in particular a significant trend of Zn and Se serum levels to be decreased and Cu to be increased with the severity of symptoms. For Mg and I, no differences were observed, but I levels were shown to be increased in all groups.

Interceptive Treatment with Invisalign® First in Moderate and Severe Cases: A Case Series.

The increasing demand for more aesthetic/comfortable orthodontic alternatives fostered the utilization of clear aligners in recent years. However, the efficacy of clear aligners for treating complex malocclusions is often treated with scepticism. This case series aims to evaluate the predictability of the Invisalign® First system in moderate and severe cases requiring interceptive orthodontic treatments in mixed dentition. A total of 23 patients with 102 interceptive orthodontic malocclusion traits were selected for orthodontic treatment with Invisalign® First and were examined over 18 months (Phase 1). Clinical assessments included ClinCheck® predictions, cephalometric measurements, and measuring tools commonly used to quantify tooth movement. Measurements taken at the beginning and end of the treatment were compared. The complexity degree of each case was established based on the set of problems presented by each patient. All treatment objectives were achieved within 18 months, except for two Class II cases, with 69% of them solved with the first set of aligners. Additional aligners were used in the remaining cases. Even though these 23 cases suggest that the Invisalign® First (Phase 1) may be effective in most interceptive problems, controlled randomized clinical trials are required to evaluate movement predictability and how this relates to the problem complexity and additional aligners required.