Water-assisted growth of uniform 100 mm diameter SWCNT arrays.

We report a simple method for growing high-quality single-walled carbon nanotube (SWCNT) arrays on 100 mm wafers via the addition of water vapor to highly purified gases during the CNT growth step. We show that adding a small amount of water during growth helps to create a uniform catalyst distribution and yields high-quality (Raman G/D of 26 ± 3), high-density (up to 6 × 10(11) cm(-2)) and uniform SWCNT arrays on 100 mm large wafers. We rationalize our finding by suggesting that the addition of water decreases catalyst mobility, preventing its coarsening at higher temperatures. We also report a new mechanism of catalyst inactivation in wafer-scale growth using ultrapurified gas sources by the formation of large, 5 ± 3 µm iron particles. We found such formations to be common for substrates with large temperature gradients, such as for wafers processed in a typical cold-wall chemical vapor deposition reactor.

Thermally switchable aligned nanopores by magnetic-field directed self-assembly of block copolymers.

A scalable approach for developing large area polymer films, with stimuli responsive vertically aligned nanopores is reported. Magnetic fields are used to create highly aligned hexagonally packed block copolymer cylindrical microdomains with order parameters exceeding 0.95. Selective etch removal of material yields nanoporous films which demonstrate reversible pore closure on heating.

Molecular Design of Liquid Crystalline Brush-Like Block Copolymers for Magnetic Field Directed Self-Assembly: A Platform for Functional Materials.

We report on the development of a liquid crystalline block copolymer with brush-type architecture as a platform for creating functional materials by magnetic-field-directed self-assembly. Ring-opening metathesis of n-alkyloxy cyanobiphenyl and polylactide (PLA) functionalized norbornene monomers provides efficient polymerization yielding low polydispersity block copolymers. The mesogenic species, spacer length, monomer functionality, brush-chain length, and overall molecular weight were chosen and optimized to produce hexagonally packed cylindrical PLA domains which self-assemble and align parallel to an applied magnetic field. The PLA domains can be selectively removed by hydrolytic degradation resulting in the production of nanoporous films. The polymers described here provide a versatile platform for scalable fabrication of aligned nanoporous materials and other functional materials based on such templates.

Slow unfolded-state structuring in Acyl-CoA binding protein folding revealed by simulation and experiment.

Protein folding is a fundamental process in biology, key to understanding many human diseases. Experimentally, proteins often appear to fold via simple two- or three-state mechanisms involving mainly native-state interactions, yet recent network models built from atomistic simulations of small proteins suggest the existence of many possible metastable states and folding pathways. We reconcile these two pictures in a combined experimental and simulation study of acyl-coenzyme A binding protein (ACBP), a two-state folder (folding time ~10 ms) exhibiting residual unfolded-state structure, and a putative early folding intermediate. Using single-molecule FRET in conjunction with side-chain mutagenesis, we first demonstrate that the denatured state of ACBP at near-zero denaturant is unusually compact and enriched in long-range structure that can be perturbed by discrete hydrophobic core mutations. We then employ ultrafast laminar-flow mixing experiments to study the folding kinetics of ACBP on the microsecond time scale. These studies, along with Trp-Cys quenching measurements of unfolded-state dynamics, suggest that unfolded-state structure forms on a surprisingly slow (~100 µs) time scale, and that sequence mutations strikingly perturb both time-resolved and equilibrium smFRET measurements in a similar way. A Markov state model (MSM) of the ACBP folding reaction, constructed from over 30 ms of molecular dynamics trajectory data, predicts a complex network of metastable stables, residual unfolded-state structure, and kinetics consistent with experiment but no well-defined intermediate preceding the main folding barrier. Taken together, these experimental and simulation results suggest that the previously characterized fast kinetic phase is not due to formation of a barrier-limited intermediate but rather to a more heterogeneous and slow acquisition of unfolded-state structure.

Microfluidic mixers for studying protein folding.

The process by which a protein folds into its native conformation is highly relevant to biology and human health yet still poorly understood. One reason for this is that folding takes place over a wide range of timescales, from nanoseconds to seconds or longer, depending on the protein. Conventional stopped-flow mixers have allowed measurement of folding kinetics starting at about 1 ms. We have recently developed a microfluidic mixer that dilutes denaturant ~100-fold in ~8 µs. Unlike a stopped-flow mixer, this mixer operates in the laminar flow regime in which turbulence does not occur. The absence of turbulence allows precise numeric simulation of all flows within the mixer with excellent agreement to experiment. Laminar flow is achieved for Reynolds numbers Re ≤100. For aqueous solutions, this requires micron scale geometries. We use a hard substrate, such as silicon or fused silica, to make channels 5-10 µm wide and 10 µm deep (See Figure 1). The smallest dimensions, at the entrance to the mixing region, are on the order of 1 µm in size. The chip is sealed with a thin glass or fused silica coverslip for optical access. Typical total linear flow rates are ~1 m/s, yielding Re~10, but the protein consumption is only ~0.5 nL/s or 1.8 µL/hr. Protein concentration depends on the detection method: For tryptophan fluorescence the typical concentration is 100 µM (for 1 Trp/protein) and for FRET the typical concentration is ~100 nM. The folding process is initiated by rapid dilution of denaturant from 6 M to 0.06 M guanidine hydrochloride. The protein in high denaturant flows down a central channel and is met on either side at the mixing region by buffer without denaturant moving ~100 times faster (see Figure 2). This geometry causes rapid constriction of the protein flow into a narrow jet ~100 nm wide. Diffusion of the light denaturant molecules is very rapid, while diffusion of the heavy protein molecules is much slower, diffusing less than 1 µm in 1 ms. The difference in diffusion constant of the denaturant and the protein results in rapid dilution of the denaturant from the protein stream, reducing the effective concentration of the denaturant around the protein. The protein jet flows at a constant rate down the observation channel and fluorescence of the protein during folding can be observed using a scanning confocal microscope.

Evidence of multiple folding pathways for the villin headpiece subdomain.

The defining property of two-state models of protein folding is that the measured relaxation rates are independent of the starting conditions and only depend on the final conditions. In this work we compare the kinetics of the very fast folding villin subdomain measured after a large change in denaturant concentration using an ultrarapid microfluidic mixer with the kinetics measured after a small temperature change in a laser T-jump experiment and find a significant difference in the observed folding kinetics. The final conditions of temperature and denaturant concentration and the use of tryptophan fluorescence as a probe are the same in both experiments, while the initial conditions are very different. The slower mixing kinetics show no evidence of the faster phase in T-jump experiments, which would support models of on- or off-pathway intermediates. Rather we interpret the combined mixer and T-jump experiments as evidence of an ensemble of unfolded states, some of which are traps. The ensemble after dilution from high denaturant is more expanded than the ensemble after an increase in temperature and, on average, takes longer to reach the native state.

pH-tunable ion selectivity in carbon nanotube pores.

The selectivity of ion transport in nanochannels is of primary importance for a number of physical, chemical, and biological processes ranging from fluid separation to ion-channel-regulated cellular processes. Fundamental understanding of these phenomena requires model nanochannels with well-defined and controllable structural properties. Carbon nanotubes provide an ideal choice for nanofluidic studies because of their simple chemistry and structure, the atomic scale smoothness and chemical inertness of the graphitic walls, and the tunability of their diameter and length. Here, we investigate the selectivity of single and, for the first time, binary salt mixtures transport through narrow carbon nanotubes that act as the only pores in a silicon nitride membrane. We demonstrate that negatively charged carboxylic groups are responsible for the ion rejection performance of carbon nanotube pores and that ion permeation of small salts can be tuned by varying solution pH. Investigation of the effect of solution composition and ion valences for binary electrolytes with common cation in a pressure-driven flow reveals that the addition of slower diffusing multivalent anions to a solution of faster diffusing monovalent anions favors permeation of the monovalent anion. Larger fractions and valences of the added multivalent anions lower the rejection of the monovalent anion. In some cases, we observe negative rejection at low monovalent ion content.

Extremely slow intramolecular diffusion in unfolded protein L.

A crucial parameter in many theories of protein folding is the rate of diffusion over the energy landscape. Using a microfluidic mixer we have observed the rate of intramolecular diffusion within the unfolded B1 domain of protein L before it folds. The diffusion-limited rate of intramolecular contact is about 20 times slower than the rate in 6 M GdnHCl, and because in these conditions the protein is also more compact, the intramolecular diffusion coefficient decreases 100-500 times. The dramatic slowdown in diffusion occurs within the 250 micros mixing time of the mixer, and there appears to be no further evolution of this rate before reaching the transition state of folding. We show that observed folding rates are well predicted by a Kramers model with a denaturant-dependent diffusion coefficient and speculate that this diffusion coefficient is a significant contribution to the observed rate of folding.

Direct observation of downhill folding of lambda-repressor in a microfluidic mixer.

The protein lambda(6-85) has been implicated in barrierless folding by observations of kinetic relaxation after nanosecond T-jump. In this work we observed folding of this protein after dilution of a high denaturant in an ultrarapid microfluidic mixer at temperatures far below the thermal midpoint. The observations of total intensity and spectral shift of tryptophan fluorescence yielded distinctly different kinetics and activation energies. These results may be explained as diffusion on a low-barrier, one-dimensional, free-energy surface, with different probes having different sensitivities along the reaction coordinate. Additionally, we observed an extremely fast phase within the mixing time that was not observed by T-jump, suggesting that the ensemble of unfolded states populated at high denaturant is distinct from those accessible at high temperature.

Mechanism and kinetics of growth termination in controlled chemical vapor deposition growth of multiwall carbon nanotube arrays.

We have investigated growth kinetics of multiwall carbon nanotube (MWCNT) arrays produced by catalytic thermal decomposition of ethylene gas in hydrogen, water, and argon mixture. The MWCNT growth rate exhibits a nonmonotonic dependence on total pressure and reaches a maximum at approximately 750 Torr of total pressure. Water concentrations in excess of 3000 ppm lead to the decrease in the observed growth rate. Optimal pressure and water concentration combination results in a reliable growth of well-aligned MWCNT arrays at a maximum growth rate of approximately 30 microm/min. These MWCNT arrays can reach heights of up to 1 mm with typical standard deviations for the array height of less than 8% over a large number of process runs spread over the time of 8 months. Nanotube growth rate in this optimal growth region remains essentially constant until growth reaches an abrupt and irreversible termination. We present a quantitative model that shows how accumulation of the amorphous carbon patches at the catalyst particle surface and the carbon diffusion to the growing nanotube perimeter causes this abrupt growth cessation. The influence of the partial pressures of ethylene and hydrogen on the ethylene decomposition driving force explains the nonlinear behavior of the growth rate as a function of total process pressure.

High-speed, temperature programmable gas chromatography utilizing a microfabricated chip with an improved carbon nanotube stationary phase.

A new growth recipe for producing carbon nanotubes (CNTs) combined with a new bonding technique was implemented in a microfabricated gas chromatography (micro-GC) chip. Specifically, the micro-GC chip contained a 30-cm (length) microfabricated channel with a 50 microm x 50 microm square cross-section. A CNT stationary phase "mat" was grown on the bottom of the separation channel prior to the chip bonding. Injections onto the micro-GC chip were made using a previously reported high-speed diaphragm valve technique. A FID was used for detection with a high-speed electrometer board. All together, the result was a highly efficiency, temperature programmable (via low thermal mass, rapid on-chip resistive heating) micro-GC chip. In general, the newly designed micro-GC chip can be operated at significantly lower temperature and pressure than our previously reported micro-GC chip, while producing excellent chemical separations. Scanning electron microscopy (SEM) images show a relatively thin and uniform mat of nanotubes with a thickness of approximately 800 nm inside the channel. The stationary phase was further characterized using Raman spectroscopy. The uniformity of the stationary phase resulted in better separation efficiency and peak symmetry (as compared to our previous report) in the separation of a mixture of five n-alkanes (n-hexane, n-octane, n-nonane, n-decane and n-undecane). The on-chip resistive heater employing a temperature programming rate of 26 degrees C/s produced a peak capacity of eight within a 1.5-s time window.

Microfluidic mixers for the investigation of rapid protein folding kinetics using synchrotron radiation circular dichroism spectroscopy.

We have developed a microfluidic mixer optimized for rapid measurements of protein folding kinetics using synchrotron radiation circular dichroism (SRCD) spectroscopy. The combination of fabrication in fused silica and synchrotron radiation allows measurements at wavelengths below 220 nm, the typical limit of commercial instrumentation. At these wavelengths, the discrimination between the different types of protein secondary structure increases sharply. The device was optimized for rapid mixing at moderate sample consumption by employing a serpentine channel design, resulting in a dead time of less than 200 micros. Here, we discuss the design and fabrication of the mixer and quantify the mixing efficiency using wide-field and confocal epi-fluorescence microscopy. We demonstrate the performance of the device in SRCD measurements of the folding kinetics of cytochrome c, a small, fast-folding protein. Our results show that the combination of SRCD with microfluidic mixing opens new possibilities for investigating rapid conformational changes in biological macromolecules that have previously been inaccessible.

Ion exclusion by sub-2-nm carbon nanotube pores.

Biological pores regulate the cellular traffic of a large variety of solutes, often with high selectivity and fast flow rates. These pores share several common structural features: the inner surface of the pore is frequently lined with hydrophobic residues, and the selectivity filter regions often contain charged functional groups. Hydrophobic, narrow-diameter carbon nanotubes can provide a simplified model of membrane channels by reproducing these critical features in a simpler and more robust platform. Previous studies demonstrated that carbon nanotube pores can support a water flux comparable to natural aquaporin channels. Here, we investigate ion transport through these pores using a sub-2-nm, aligned carbon nanotube membrane nanofluidic platform. To mimic the charged groups at the selectivity region, we introduce negatively charged groups at the opening of the carbon nanotubes by plasma treatment. Pressure-driven filtration experiments, coupled with capillary electrophoresis analysis of the permeate and feed, are used to quantify ion exclusion in these membranes as a function of solution ionic strength, pH, and ion valence. We show that carbon nanotube membranes exhibit significant ion exclusion that can be as high as 98% under certain conditions. Our results strongly support a Donnan-type rejection mechanism, dominated by electrostatic interactions between fixed membrane charges and mobile ions, whereas steric and hydrodynamic effects appear to be less important.

Ruggedness in the folding landscape of protein L.

By exploring the folding pathways of the B1 domain of protein L with a series of equilibrium and rapid kinetic experiments, we have found its unfolded state to be more complex than suggested by two-state folding models. Using an ultrarapid mixer to initiate protein folding within approximately 2-4 microseconds, we observe folding kinetics by intrinsic tryptophan fluorescence and fluorescence resonance energy transfer. We detect at least two processes faster than 100 mus that would be hidden within the burst phase of a stopped-flow instrument measuring tryptophan fluorescence. Previously reported measurements of slow intramolecular diffusion are commensurate with the slower of the two observed fast phases. These results suggest that a multidimensional energy landscape is necessary to describe the folding of protein L, and that the dynamics of the unfolded state is dominated by multiple small energy barriers.

Biofunctional subwavelength optical waveguides for biodetection.

We report a versatile biofunctional subwavelength photonic device platform for real-time detection of biological molecules. Our devices contain lipid bilayer membranes fused onto metal oxide nanowire waveguides stretched across polymeric flow channels. The lipid bilayers incorporating target receptors are submersed in the propagating evanescent field of the optical cavity. We show that the lipid bilayers in our devices are continuous, have very high mobile fraction, and are resistant to fouling. We also demonstrate that our platform allows rapid membrane exchange. Finally, we use this device to detect the hybridization of specific DNA target sequences in solution to complementary probe DNA strands anchored to the lipid bilayer. This evanescent wave sensing architecture holds great potential for portable, all-optical detection systems.

Improvements in mixing time and mixing uniformity in devices designed for studies of protein folding kinetics.

Using a microfluidic laminar flow mixer designed for studies of protein folding kinetics, we demonstrate a mixing time of 1 +/- 1 micros with sample consumption on the order of femtomoles. We recognize two limitations of previously proposed designs: (1) size and shape of the mixing region, which limits mixing uniformity and (2) the formation of Dean vortices at high flow rates, which limits the mixing time. We address these limitations by using a narrow shape-optimized nozzle and by reducing the bend of the side channel streamlines. The final design, which combines both of these features, achieves the best performance. We quantified the mixing performance of the different designs by numerical simulation of coupled Navier-Stokes and convection-diffusion equations and experiments using fluorescence resonance energy-transfer (FRET)-labeled DNA.

Protein hydrophobic collapse and early folding steps observed in a microfluidic mixer.

We demonstrate that the sub-millisecond protein folding process referred to as "collapse" actually consists of at least two separate processes. We observe the UV fluorescence spectrum from naturally occurring tryptophans in three well-studied proteins, cytochrome c, apomyoglobin, and lysozyme, as a function of time in a microfluidic mixer with a dead time of approximately 20 mus. Single value decomposition of the time-dependent spectra reveal two separate processes: 1), a spectral shift which occurs within the mixing time; and 2), a fluorescence decay occurring between approximately 100 and 300 micros. We attribute the first process to hydrophobic collapse and the second process to the formation of the first native tertiary contacts.

Mapping protein collapse with single-molecule fluorescence and kinetic synchrotron radiation circular dichroism spectroscopy.

We have used the combination of single-molecule Förster resonance energy transfer and kinetic synchrotron radiation circular dichroism experiments to probe the conformational ensemble of the collapsed unfolded state of the small cold shock protein CspTm under near-native conditions. This regime is physiologically most relevant but difficult to access experimentally, because the equilibrium signal in ensemble experiments is dominated by folded molecules. Here, we avoid this problem in two ways. One is the use of single-molecule Förster resonance energy transfer, which allows the separation of folded and unfolded subpopulations at equilibrium and provides information on long-range intramolecular distance distributions. From experiments with donor and acceptor chromophores placed at different positions within the chain, we find that the distance distributions in unfolded CspTm agree surprisingly well with a Gaussian chain not only at high concentrations of denaturant, where the polypeptide chain is expanded, but also at low denaturant concentrations, where the chain is collapsed. The second, complementary approach is synchrotron radiation circular dichroism spectroscopy of collapsed unfolded molecules transiently populated with a microfluidic device that enables rapid mixing. The results indicate a beta-structure content of the collapsed unfolded state of approximately 20% compared with the folded protein. This suggests that collapse can induce secondary structure in an unfolded state without interfering with long-range distance distributions characteristic of a random coil, which were previously found only for highly expanded unfolded proteins.

Controlled electrostatic gating of carbon nanotube FET devices.

Carbon nanotube transistors are a promising platform for the next generation of nonoptical biosensors. However, the exact nature of the biomolecule interactions with nanotubes in these devices remains unknown, creating one of the major obstacles to their practical use. We assembled alternating layers of oppositely charged polyelectrolytes on the carbon nanotube transistors to mimic gating of these devices by charged molecules. The devices showed reproducible oscillations of the transistor threshold voltage depending on the polarity of the outer polymer layer in the multilayer film. This behavior shows excellent agreement with the predictions of a simple electrostatic model. Finally, we demonstrate that complex interactions of adsorbed species with the device substrate and the surrounding electrolyte can produce significant and sometimes unexpected effects on the device characteristics.