Effect of Graphene Oxide Addition on the Anticorrosion Properties of the Phosphate Coatings in Neutral and Acidic Aqueous Media.

Graphene oxide (GO) is an advanced additive improving the properties of various types of coatings and intensifying the deposition process. In this work, GO is used as an additive to the traditional phosphating solution of the widely used Russian low-carbon steel 08YU (DC04). The anticorrosion properties of the obtained phosphate coatings were investigated in neutral (0.5 M NaCl) and acidified (0.1 M Na2SO4 + 0.02 M H2SO4) aqueous solutions. Increasing the GO concentration in the phosphating solution to 0.3 g/L was found to improve the anticorrosion properties of the phosphate coatings in neutral NaCl solutions. At the same time, in acidified Na2SO4 solutions, the corrosion rate of 08YU steel with phosphate coatings increased as a function of the GO concentration. It is assumed that a possible reason for various corrosive behavior is the influence of the GO plates distributed in the coating on the rate of the oxygen or hydrogen reduction reactions.

Surface Charge at the Oxide/Electrolyte Interface: Toward Optimization of Electrolyte Composition for Treatment of Aluminum and Magnesium by Plasma Electrolytic Oxidation.

Controlling microdischarges in plasma electrolytic oxidation is of great importance in order to optimize coating quality. The present study highlights the relationship between the polarity at which breakdown occurs and the electrolyte pH as compared with the isoelectric point (IEP). It is found that working at a pH higher than the IEP of the grown oxide prevents the buildup of detrimental cathodic discharges. The addition of phosphates results in a shift in the IEP to a lower value and therefore promotes anodic discharges at the expense of cathodic ones.