Ionic liquids (ILs) are a promising class of lubricants that allow dynamic friction control at electrified interfaces. In the real world, surfaces inevitably exhibit some degree of roughness, which can influence lubrication. In this work, we deposited single-layer graphene onto 20 nm silica nanoparticle films to investigate the effect of surface curvature and electrostatic potential on both the lubricious behavior and interfacial layering structure of 1-ethyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide on graphene. Normal force and friction force measurements were conducted by atomic force microscopy using a sharp silicon tip. Our results reveal that the friction coefficient at the lubricated tip-graphene contacts significantly depends on surface curvature. Two friction coefficients are measured on graphene peaks and valleys with a higher coefficient measured at lower loads (pressures), whereas only one friction coefficient is measured on smooth graphene. Moreover, the electrotunability of the friction coefficient at low loads is observed to be significantly enhanced in peaks and valleys compared with smooth graphene. This is associated with the promoted overscreening of surface charge on convex interfaces and the steric hindrance at concave interfaces, which leads to more layers of ions (electrostatically) bound to the surface, i.e., thicker boundary films (electrical double layers). This work opens new avenues to control IL lubrication on the nanoscale by combining topographic features and an electric field.
Attaining controllable molecular motion at the nanoscale can be beneficial for multiple reasons, spanning from optoelectronics to catalysis. Here we study the movement of a two-legged molecular walker by modeling the migration of a phenyl aziridine ring on curved graphene. We find that directional ring migration can be attained on graphene in the cases of both 1D (wrinkled/rippled) and 2D (bubble-shaped) curvature. Using a descriptor approach based on graphene's frontier orbital orientation, we can understand the changes in binding energy of the ring as it translates across different sites with variable curvature and the kinetic barriers associated with ring migration. Additionally, we show that the extent of covalent bonding between graphene and the molecule at different sites directly controls the binding energy gradient, propelling molecular migration. Importantly, one can envision such walkers as carriers of charge and disruptors of local bonding. This study enables a new way to tune the electronic structure of two-dimensional materials for a range of applications.
The performance of electrochemical devices using ionic liquids (ILs) as electrolytes can be impaired by water uptake. This work investigates the influence of water on the behavior of hydrophilic and hydrophobic ILsâwith ethylsulfate and tris(perfluoroalkyl)trifluorophosphate or bis(trifluoromethyl sulfonyl)imide (TFSI) anions, respectivelyâon electrified graphene, a promising electrode material. The results show that water uptake slightly reduces the IL electrochemical stability and significantly influences graphene's potential of zero charge, which is justified by the extent of anion depletion from the surface. Experiments confirm the dominant contribution of graphene's quantum capacitance (CQ) to the total interfacial capacitance (Cint) near the PZC, as expected from theory. Combining theory and experiments reveals that the hydrophilic IL efficiently screens surface charge and exhibits the largest double layer capacitance (CIL â¼ 80 µF cm-2), so that CQ governs the charge stored. The hydrophobic ILs are less efficient in charge screening and thus exhibit a smaller capacitance (CIL â¼ 6-9 µF cm-2), which governs Cint already at small potentials. An increase in the total interfacial capacitance is observed at positive voltages for humid TFSI-ILs relative to dry ones, consistent with the presence of a satellite peak. Short-range surface forces reveal the change of the interfacial layering with potential and water uptake owing to reorientation of counterions, counterion binding, co-ion repulsion, and water enrichment. These results are consistent with the charge being mainly stored in a â¼2 nm-thick double layer, which implies that ILs behave as highly concentrated electrolytes. This knowledge will advance the design of IL-graphene-based electrochemical devices.
Microcrystal electron diffraction, grazing incidence wide-angle scattering, and UV-Vis spectroscopy were used to determine the unit cell structure and the relative composition of dimethylated diketopyrrolopyrrole (MeDPP) H- and J-polymorphs within thin films subjected to vapor solvent annealing (VSA) for different times. Electronic structure and excited state deactivation pathways of the different polymorphs were examined by transient absorption spectroscopy, conductive probe atomic force microscopy, and molecular modeling. We find VSA initially converts amorphous films into mixtures of H- and J-polymorphs and promotes further conversion from H to J with longer VSA times. Though both polymorphs exhibit efficient SF to form coupled triplets, free triplet yields are higher in J-polymorph films compared to mixed films because coupling in J-aggregates is lower, and, in turn, more favorable for triplet decoupling.
Graphene has unique mechanical, electronic, and optical properties that make it of interest for an array of applications. These properties can be modulated by controlling the architecture of graphene and its interactions with surfaces. Self-assembled monolayers (SAMs) can tailor graphene-surface interactions; however, spatially controlling these interactions remains a challenge. Here, we blend colloidal lithography with varying SAM chemistries to create patterned architectures that modify the properties of graphene based on its chemical interactions with the substrate and to study how these interactions are spatially arrayed. The patterned systems and their resulting structural, nanomechanical, and optical properties have been characterized using atomic force microscopy, Raman and infrared spectroscopies, scattering-type scanning near-field optical microscopy, and X-ray photoelectron spectroscopy.
Heterojunctions of semiconductors and metals are the fundamental building blocks of modern electronics. Coherent heterostructures between dissimilar materials can be achieved by composition, doping, or heteroepitaxy of chemically different elements. Here, we report the formation of coherent single-layer 1H-1T MoS2 heterostructures by mechanical exfoliation on Au(111), which are chemically homogeneous with matched lattices but show electronically distinct semiconducting (1H phase) and metallic (1T phase) character, with the formation of these heterojunctions attributed to a combination of lattice strain and charge transfer. The exfoliation approach employed is free of tape residues usually found in many exfoliation methods and yields single-layer MoS2 with millimeter (mm) size on the Au surface. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), scanning tunneling microscopy (STM), and scanning tunneling spectroscopy (STS) have collectively been employed to elucidate the structural and electronic properties of MoS2 monolayers on Au substrates. Bubbles in the MoS2 formed by the trapping of ambient adsorbates beneath the single layer during deposition, have also been observed and characterized. Our work here provides a basis to produce two-dimensional heterostructures which represent potential candidates for future electronic devices.
The genomic DNA of eukaryotic cells exists in the form of chromatin, the structure of which controls the biochemical accessibility of the underlying DNA to effector proteins. In order to gain an in depth molecular understanding of how chromatin structure regulates DNA repair, detailed in vitro biochemical and biophysical studies are required. However, because of challenges associated with reconstituting nucleosome arrays containing site-specifically positioned DNA modifications, such studies have been limited to the use of mono- and dinucleosomes as model in vitro substrates, which are incapable of folding into native chromatin structures. To address this issue, we developed a straightforward and general approach for assembling chemically defined oligonucleosome arrays (i.e., designer chromatin) containing site-specifically modified DNA. Our method takes advantage of nicking endonucleases to excise short fragments of unmodified DNA, which are subsequently replaced with synthetic oligonucleotides containing the desired modification. Using this approach, we prepared several oligonucleosome substrates containing precisely positioned 2'-deoxyuridine (dU) residues and examined the efficiency of base excision repair (BER) within several distinct chromatin architectures. We show that, depending on the translational position of the lesion, the combined catalytic activities of uracil DNA glycosylase (UDG) and apurinic/apyrimidinic endonuclease 1 (APE1) can be either inhibited by as much as 20-fold or accelerated by more than 5-fold within compact chromatin (i.e., the 30 nm fiber) relative to naked DNA. Moreover, we demonstrate that digestion of dU by UDG/APE1 proceeds much more rapidly in mononucleosomes than in compacted nucleosome arrays, thereby providing the first direct evidence that internucleosome interactions play an important role in regulating BER within higher-order chromatin structures. Overall, this work highlights the value of performing detailed biochemical studies on precisely modified chromatin substrates in vitro and provides a robust platform for investigating DNA modifications in chromatin biology.
Chromatin/chemistry , DNA/chemistry , Chromatin/metabolism , DNA/metabolism , Models, Molecular
Molybdenum disulfide (MoS2) is a semiconducting transition metal dichalcogenide that is known to be a catalyst for both the hydrogen evolution reaction (HER) as well as for hydro-desulfurization (HDS) of sulfur-rich hydrocarbon fuels. Specifically, the edges of MoS2 nanostructures are known to be far more catalytically active as compared to unmodified basal planes. However, in the absence of the precise details of the geometric and electronic structure of the active catalytic sites, a rational means of modulating edge reactivity remain to be developed. Here we demonstrate using first-principles calculations, X-ray absorption spectroscopy, as well as scanning transmission X-ray microscopy (STXM) imaging that edge corrugations yield distinctive spectroscopic signatures corresponding to increased localization of hybrid Mo 4d states. Independent spectroscopic signatures of such edge states are identified at both the S L2,3 and S K-edges with distinctive spatial localization of such states observed in S L2,3-edge STXM imaging. The presence of such low-energy hybrid states at the edge of the conduction band is seen to correlate with substantially enhanced electrocatalytic activity in terms of a lower Tafel slope and higher exchange current density. These results elucidate the nature of the edge electronic structure and provide a clear framework for its rational manipulation to enhance catalytic activity.
The facile assembly of metal nanostructured arrays is a fundamental step in the design of plasmon enhanced chemical sensing and solar cell architectures. Here we have investigated methods of creating controlled formations of two-dimensional periodic arrays comprised of 20 nm Au nanoparticles (NPs) on a hydrophilic polymer surface using particle lithography. To direct the assembly process, capillary force and NP concentration both play critical roles on the resulting nanostructured arrays. As such, tuning these experimental parameters can directly be used to modify the nature of the nanostructures formed. To explore this, two different concentrations of Au NP solutions (â¼7 × 1011 or 4 × 1012 NPs/mL) were used in conjunction with a fixed concentration of polystyrene microspheres (PS MS, â¼6 × 109 PS MS/mL). Assembly at a relative humidity (RH) of 45% with the higher concentration resulted in the formation of well-defined Au nanorings of ca. 23 nm in height and 881 nm in diameter with a pitch of 2.5 µm. Assembly at 65% RH with the lower concentration of NPs resulted in Au nanodonut arrays comprised of isolated single Au NPs. To explore the extent of coupling in the well-defined structures, dark field scattering spectra were collected and showed a broad localized surface plasmon resonance (LSPR) peak with a shoulder, which full-wave electrodynamics modeling (finite-difference time domain (FDTD) method) attributed to be a result of pronounced particle-particle coupling along the circumference of the nanoring array.
Self-assembled monolayers of thiol terminated conjugated diacetylenes can be cross-linked using ultraviolet light to form highly conjugated polydiacetylenic conductive monolayers1; however, the reported syntheses of the diacetylene monomers present numerous problems that prevent the wide spread application of these in functional materials. We report a redesigned four-step synthesis that proceeds in 75-80 % overall yields and allows gram scale production of an array of thiol terminated conjugated diacetylenes, thereby allowing examination and application of these low-dimensional conductive materials.
Because of the absence of native dangling bonds on the surface of the layered transition metal dichalcogenides (TMDCs), the surface of colloidal quantum dots (QDs) of TMDCs is exposed directly to the solvent environment. Therefore, the optical and electronic properties of TMDCS QDs are expected to have stronger influence from the solvent than usual surface-passivated QDs due to more direct solvent-QD interaction. Study of such solvent effect has been difficult in colloidal QDs of TMDC due to the large spectroscopic heterogeneity resulting from the heterogeneity of the lateral size or (and) thickness in ensemble. Here, we developed a new synthesis procedure producing the highly uniform colloidal monolayer WS2 QDs exhibiting well-defined photoluminescence (PL) spectrum free from ensemble heterogeneity. Using these newly synthesized monolayer WS2 QDs, we observed the strong influence of the aromatic solvents on the PL energy and intensity of monolayer WS2 QD beyond the simple dielectric screening effect, which is considered to result from the direct electronic interaction between the valence band of the QDs and molecular orbital of the solvent. We also observed the large effect of stacking/separation equilibrium on the PL spectrum dictated by the balance between inter QD and QD-solvent interactions. The new capability to probe the effect of the solvent molecules on the optical properties of colloidal TMDC QDs will be valuable for their applications in various liquid surrounding environments.
Here we report on the effect of local molecular organization or "tertiary structure" on the charge transport properties of thiol-tethered tetraphenylporphyrin (ZnTPPF4-SC5SH) nanoscale clusters of ca. 5 nm in lateral dimension embedded within a dodecanethiol (C12) monolayer on Au(111). The structure of the clusters in the mixed monolayers and their resulting transport properties were monitored by Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM) and Spectroscopy (STS). The mixed films were deposited on Au(111) for a period of one to five days, during which the lateral dimensions of the ZnTPPF4-SC5SH islands that were formed after one day reduced by nearly 35% on average by five days, accompanied by a noticeable depletion of the surrounding C12 monolayer. These subtle changes in mixed monolayer morphology were accompanied by drastic differences in conductance. The ZnTPPF4-SC5SH clusters assembled for one day exhibited highly reproducible I-V spectra with simple tunneling behavior. By three days, this evolved into bias-induced switching of conductance, with a â¼100-1000 fold increase. Furthermore, current fluctuations started to become significant, and then dominated transport across the ZnTPPF4-SC5SH clusters assembled over five days. Our data suggests that this evolution can be understood by slow surface diffusion, enabling the ZnTPPF4-SC5SH molecules to overcome initial steric hindrance in the early stages of island formation in the C12 monolayer (at day one), to reach a more energetically-favored, close-packed organization, as noted by the decrease in island size (by day three). However, when desorption of the supporting matrix of C12 became pronounced (by day five), the ZnTPPF4-SC5SH clusters began to lose stabilization, and stochastic switching was then observed to dominate transport in the clusters, illustrating the critical nature of the local organization on these transport properties.
Crystalline vanadium pentoxide (V2O5) has attracted significant interest as a potential cathode material for energy storage applications due to its high theoretical capacity. Unfortunately, the material suffers from low conductivity as well as slow lithium ion diffusion, both of which affect how fast the electrode can be charged/discharged and how many times it can be cycled. Colloidal crystal templating (CCT) provides a simple approach to create well-organized 3-D nanostructures of materials, resulting in a significant increase in surface area that can lead to marked improvements in electrochemical performance. Here, a single layer of open shell V2O5 architectures ca. 1 µm in height with ca. 100 nm wall thickness was fabricated using CCT, and the electrochemical properties of these assemblies were evaluated. A decrease in polarization effects, resulting from the higher surface area mesostructured features, was found to produce significantly enhanced electrochemical performance. The discharge capacity of an unpatterned thin film of V2O5 (â¼8.1 µAh/cm2) was found to increase to â¼10.2 µAh/cm2 when the material was patterned by CCT, affording enhanced charge storage capabilities as well as a decrease in the irreversible degradation during charge-discharge cycling. This work demonstrates the importance of creating mesoscale electrode surfaces for improving the performance of energy storage devices and provides fundamental understanding of the means to improve device performance.
Aramid nanofibers (ANFs), or nanoscale Kevlar fibers, are of interest for their high mechanical performance and functional nanostructure. The dispersible nature of ANFs opens up processing opportunities for creating mechanically robust and flexible nanocomposites, particularly for energy and power applications. The challenge is to manipulate ANFs into an electrode structure that balances mechanical and electrochemical performance to yield a robust and flexible electrode. Here, ANFs and graphene oxide (GO) sheets are blended using layer-by-layer (LbL) assembly to achieve mechanically flexible supercapacitor electrodes. After reduction, the resulting electrodes exhibit an ANF-rich structure where ANFs act as a polymer matrix that interfacially interacts with reduced graphene oxide sheets. It is shown that ANF/GO deposition proceeds by hydrogen bonding and π-π interactions, leading to linear growth (1.2 nm/layer pairs) and a composition of 75 wt % ANFs and 25 wt % GO sheets. Chemical reduction leads to a high areal capacitance of 221 µF/cm2, corresponding to 78 F/cm3. Nanomechanical testing shows that the electrodes have a modulus intermediate between those of the two native materials. No cracks or defects are observed upon flexing ANF/GO films 1000 times at a radius of 5 mm, whereas a GO control shows extensive cracking. These results demonstrate that electrodes containing ANFs and reduced GO sheets are promising for flexible, mechanically robust energy and power.
Driving and measuring chemical reactions at the nanoscale is crucial for developing safer, more efficient, and environment-friendly reactors and for surface engineering. Quantitative understanding of surface chemical reactions in real operating environments is challenging due to resolution and environmental limitations of existing techniques. Here we report an atomic force microscope technique that can measure reaction kinetics driven at the nanoscale by multiphysical stimuli in an ambient environment. We demonstrate the technique by measuring local reduction of graphene oxide as a function of both temperature and force at the sliding contact. Kinetic parameters measured with this technique reveal alternative reaction pathways of graphene oxide reduction previously unexplored with bulk processing techniques. This technique can be extended to understand and precisely tailor the nanoscale surface chemistry of any two-dimensional material in response to a wide range of external, multiphysical stimuli.
Porphyrinoids are robust heterocyclic dyes studied extensively for their applications in medicine and as photonic materials because of their tunable photophysical properties, diverse means of modifying the periphery, and the ability to chelate most transition metals. Commercial applications include their use as phthalocyanine dyes in optical discs, porphyrins in photodynamic therapy, and as oxygen sensors. Most applications of these dyes require exocyclic moieties to improve solubility, target diseases, modulate photophysical properties, or direct the self-organization into architectures with desired photonic properties. The synthesis of the porphyrinoid depends on the desired application, but the de novo synthesis often involves several steps, is time consuming, and results in low isolated yields. Thus, the application of core porphyrinoid platforms that can be rapidly and efficiently modified to evaluate new molecular architectures allows researchers to focus on the design concepts rather than the synthesis methods, and opens porphyrinoid chemistry to a broader scientific community. We have focused on several widely available, commercially viable porphyrinoids as platforms: meso-perfluorophenylporphyrin, perfluorophthalocyanine, and meso-perfluorophenylcorrole. The perfluorophenylporphyrin is readily converted to the chlorin, bacteriochlorin, and isobacteriochlorin. Derivatives of all six of these core platforms can be efficiently and controllably made via mild nucleophilic aromatic substitution reactions using primary S, N, and O nucleophiles bearing a wide variety of functional groups. The remaining fluoro groups enhance the photo and oxidative stability of the dyes and can serve as spectroscopic signatures to characterize the compounds or in imaging applications using (19)F NMR. This review provides an overview of the chemistry of fluorinated porphyrinoids that are being used as a platform to create libraries of photo-active compounds for applications in medicine and materials.
Halogenation , Photons , Photosensitizing Agents/chemistry , Photosensitizing Agents/therapeutic use , Porphyrins/chemistry , Porphyrins/therapeutic use , Animals , Humans , Photochemotherapy , Photosensitizing Agents/chemical synthesis , Porphyrins/chemical synthesis
Nanoscale carbon lubricants such as graphene, have garnered increased interest as protective surface coatings for devices, but its tribological properties have been shown to depend on its interactions with the underlying substrate surface and its degree of surface conformity. This conformity is especially of interest as real interfaces exhibit roughness on the order of â¼10 nm that can dramatically impact the contact area between the graphene film and the substrate. To examine the combined effects of surface interaction strength and roughness on the frictional properties of graphene, a combination of Atomic Force Microscopy (AFM) and Raman microspectroscopy has been used to explore substrate interactions and the frictional properties of single and few-layer graphene as a coating on silica nanoparticle films, which yield surfaces that mimic the nanoscaled asperities found in realistic devices. The interactions between the graphene and the substrate have been controlled by comparing their binding to hydrophilic (silanol terminated) and hydrophobic (octadecyltrichlorosilane modified) silica surfaces. AFM measurements revealed that graphene only partially conforms to the rough surfaces, with decreasing conformity, as the number of layers increase. Under higher mechanical loading the graphene conformity could be reversibly increased, allowing for a local estimation of the out-of-plane bending modulus of the film. The frictional properties were also found to depend on the number of layers, with the largest friction observed on single layers, ultimately decreasing to that of bulk graphite. This trend however, was found to disappear, depending on the tip-sample contact area and interfacial shear strain of the graphene associated with its adhesion to the substrate.
Two different nickel precursors (NiCl2 or Ni(CH3COCH2COCH3)2) in the presence of 1-dodecanethiol and a mixture of oleylamine and oleic acid were used for a one-pot colloidal synthesis to produce high purity Ni3S4 nanoparticles with controlled shapes in high yields and narrow size distributions. By simply changing the nickel precursors, the shape of Ni3S4 nanocrystals can be readily tuned from triangular nanoprisms to tetrahedra (nanopyramids). The produced nanocrystals were characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray powder diffraction, selected area electron diffraction, ultraviolet-visible spectroscopy and superconducting quantum interference device (SQUID). TEM tomography (3D-TEM) was employed to determine details of the particle shapes. SQUID measurements confirmed that particle shape and domain size could dramatically impact their magnetic properties, where tetrahedral nanopyramids of Ni3S4 nanoparticles showed ferromagnetic properties while the Ni3S4 nanoprisms showed random antiferromagnetic interactions between magnetic centers.
