RESUMEN
BACKGROUND: Bonding with self-etch primers (SEPs) is one of the most popular systems for attaching orthodontic brackets to the enamel surface. There are conflicting reports about the efficacy and success of these systems compared with acid-etch (AE) bonding. OBJECTIVE: This systematic review and meta-analysis was performed to compare SEP with conventional AE technique for bonding brackets in fixed orthodontics. SEARCH METHODS: Articles related to the subject of interest were searched in electronic databases, including PubMed, ISI Web of Science, Scopus, EMBASE, and Cochrane's CENTRAL, from inception to 2 June 2021. Search for grey literature, and hand search for relevant studies were also performed. SELECTION CRITERIA: Based on the PICO model, randomized clinical trials using full-arch bonded fixed orthodontic appliances comparing SEP and conventional AE systems were included in the review process. DATA COLLECTION AND ANALYSIS: After assessing the risk of bias, data from the included studies were extracted using custom piloted forms. Inverse-variance random-effects meta-analyses were performed to combine the results of bracket failure, adhesive remnant index (ARI), and bonding time. RESULTS: Nineteen randomized clinical trials were included in the systematic review and 17 randomized clinical trials [5 parallel-group (PG) and 12 split-mouth (SM) studies] were included in the meta-analysis. No significant difference in bracket failure at 6 months [risk ratio (RR) = 1.50, P = 0.26, 12 SM] and (RR = 0.68, P = 0.34, 2 PG), 12 months (RR = 1.6, 8 SM) and (RR = 1.17, P = 0.54, 2 PG), and ≥18 months (RR = 0.84, P = 0.31, 3 SM) and (RR = 1.20, P = 0.3, 3 PG) between SEP and AE groups could be found. Also, ARI score was similar between different bonding systems [mean difference (MD) = -0.44, P = 0.06, 4 SM]. The bonding time per tooth was faster in the SEP group (MD = -26.55, P < 0.001, 2 SM) and (MD = -24.00, P < 0.001, 2 PG). LIMITATIONS: inclusion of three studies with a high risk of bias and high amount of inconsistency between the results of individual studies were the biggest limitations of our review. CONCLUSIONS: The bracket bonding failure and ARI score were not significantly different between self-etch and conventional AE bonding systems. The bonding time was lower for the SEP, but some other requirements for SEPs like pumice prophylaxis could diminish this advantage. REGISTRATION: The protocol for this systematic review was registered at PROSPERO with the ID CRD42021248540.
Asunto(s)
Recubrimiento Dental Adhesivo , Soportes Ortodóncicos , Sesgo , Recubrimiento Dental Adhesivo/métodos , Humanos , Ensayo de Materiales , Cementos de Resina , Factores de TiempoRESUMEN
Background and aims: This study aimed to evaluate the efficacy of ibuprofen, bite wafer and low power red and infrared lasers in orthodontic pain management. Subjects and methods: One hundred subjects were randomly assigned to 5 groups of 20 each. The patients in each group received one of the following treatments after the placement of fixed orthodontic appliances: 1. placebo medication, 2. ibuprofen, 3. bite wafer, 4. irradiation from a low level red laser (LLRL; 660 nm, 200 mW, 1 J/point, 6 points), 5. irradiation from a low level infrared laser (LLIL; 810 nm, 200 mW, 1 J/point, 6 points). A Visual Analogue Scale (VAS) was used to record pain intensity while chewing, biting, fitting front teeth, and fitting back teeth at 2 hours, 6 hours, bedtime, 24 hours, 2 days, 3 days and 7 days following arch wire placement. Results: Significant between-group differences were found in pain at chewing, biting, fitting front teeth and fitting back teeth at all time points (p<0.001). Generally, VAS scores in the LLIL, ibuprofen and bite wafer groups were close to each other and significantly lower than those in the LLRL and control groups (p<0.05), which showed comparable pain level at most intervals. The infrared laser group (LLIL) showed significantly lower pain than all other groups at some points over the experiment (p<0.05). Conclusions: A single irradiation from a low level infrared laser proved to be the best strategy for orthodontic pain control. Alternatively, chewing on a bite wafer could be recommended. These methods should be considered as suitable alternatives for ibuprofen in orthodontic patients.
RESUMEN
PURPOSE: The purpose of this study was to evaluate the effect of platelet-released growth factor (PRGF) and immediate orthodontic forces on the removal torque of miniscrews. MATERIALS AND METHODS: This study was conducted on three male dogs aged 6 to 8 months with a body weight of 17.6 to 18.4 kg. Sixty miniscrews were inserted in the posterior aspect of the femur. There were four groups, including loaded miniscrews with application of PRGF, unloaded miniscrews without application of PRGF, unloaded miniscrews with PRGF, and loaded miniscrews without PRGF. Twenty miniscrews were inserted in the femoral bone of one foot of each dog, including all the aforementioned subgroups. After 12 weeks, the miniscrews were removed by a removal torque tester device and measured in newton centimeters. RESULTS: The mean removal torque values in four groups of immediately loaded screws with PRGF, unloaded screws with PRGF, immediately loaded screws without PRGF, and unloaded screws without PRGF were 19.68, 21.74, 13.65, and 15.46 Ncm, respectively. It was shown that the mean removal torque value for the group with PRGF was significantly higher than that in the other groups (P = .0001). Although there was a tendency toward a decrease in removal torque value with immediate loading, it was not statistically significant (P = .21). CONCLUSION: According to the results of this study, applying PRGF with miniscrews increased their stability, but the delivery of immediate force on miniscrews had no effect on the miniscrews' stability.
Asunto(s)
Plaquetas/fisiología , Tornillos Óseos , Fémur/cirugía , Péptidos y Proteínas de Señalización Intercelular/farmacología , Métodos de Anclaje en Ortodoncia/instrumentación , Activación Plaquetaria/fisiología , Animales , Fenómenos Biomecánicos , Aleaciones Dentales/química , Remoción de Dispositivos , Perros , Fémur/efectos de los fármacos , Masculino , Miniaturización , Níquel/química , Diseño de Aparato Ortodóncico , Alambres para Ortodoncia , Oseointegración/efectos de los fármacos , Oseointegración/fisiología , Estrés Mecánico , Titanio/química , TorqueRESUMEN
BACKGROUND: With the introduction of skeletal anchorage system, recently it is possible to successfully intrude molar teeth. On the other hand, there have been concerns about periodontal changes associated with intrusion and there are few studies on this topic, especially for posterior teeth. MATERIALS AND METHODS: Ten female patients were enrolled in this study. Maxillary molar intrusion was achieved by inserting two miniscrews and a 17 × 25 titanium molybdenum alloy spring. Crestal height changes were evaluated at three intervals including: Baseline (T0), end of active treatment (T1) and 6 months after retention (T2). Other variables including probing depth, gingival recession, attachment level and bleeding on probing were evaluated by clinical measurements in the three above mentioned intervals. One-sample Kolmogrov-Smirnov test ascertained the normality of the data. For all patients, the changes in tooth position and crestal height were evaluated using one-sample t-test. (P < 0.05). RESULTS: Supra-erupted molars were successfully intruded a mean of 2.1 ± 0.9 mm during active treatment (T0-T1). A mean bone resorption of 0.9 ± 0.9 mm in mesial crest and 1 ± 0.8 mm in distal crest had occurred in total treatment (T0-T2). A mean of 0.6 ± 1.4 mm bone was deposited on mesial crest during the retention period (T1-T2) following tooth relapse. On average, 0.8 ± 0.4 mm attachment gain was obtained. Gingival margin coronalized a mean of 0.8 ± 0.6 mm throughout the entire treatment. Probing depth showed no significant change during treatment. CONCLUSION: Within the limitations of this study, these results suggest that not only periodontal status was not negatively affected by intrusion, but also there were signs of periodontal improvement including attachment gain and shortening of clinical crown height.
RESUMEN
BACKGROUND: The purpose of this study was to evaluate the effect of light-curing time on the shear bond strength (SBS) of two orthodontic color-change adhesives (CCAs). MATERIALS AND METHODS: A total of 72 extracted premolars were randomly assigned into 6 groups of 12 teeth each. Subsequent to primer application, a metal bracket was bonded to the buccal surface using an orthodontic adhesive. Two CCAs (Greengloo and Transbond Plus) were tested and one conventional light-cured adhesive (Resilience) served as control. For each adhesive, the specimens were light-cured for two different times of 20 and 40 s. All the specimens underwent mechanical testing using a universal testing machine to measure the SBS. Adhesive remnant index (ARI) was used to assess the remnant adhesive material on the tooth surface. All statistical analyses were performed using SPSS software. The significance level for all statistical tests was set at P ≤ 0.05. RESULTS: The SBSs of the tested groups were in the range of 14.05-31.25 MPa. Greengloo adhesive showed the highest SBS values when light-cured for 40 s, and Transbond Plus adhesive showed the lowest values when light-cured for 20 s. ARI scores of Transbond Plus adhesive were significantly higher than those of controls, while other differences in ARI values were not significant. CONCLUSION: Within the limitations of his study, decreasing the light-curing time from 40 to 20 s decreased the SBS of the tested adhesives; however, this decline in SBS was statistically significant only in Transbond Plus adhesive.
RESUMEN
PURPOSE: Success of orthodontic miniscrews in providing stable anchorage is dependent on their stability. The purpose of this study was to assess the effect of insertion method and postinsertion time interval on the removal torque of miniscrews as an indicator of their stability. MATERIALS AND METHODS: Seventy-two miniscrews (Jeil Medical) were inserted into the femoral bones of three male German Shepherd dogs and assigned to nine groups of eight miniscrews. Three insertion methods, including hand-driven, motor-driven with 5.0-Ncm insertion torque, and motor-driven with 20.0-Ncm insertion torque, were tested. Three time intervals of 0, 2, and 6 weeks between miniscrew insertion and removal were tested as well. Removal torque values were measured in newton centimeters by a removal torque tester (IMADA). Data were analyzed by one-way analysis of variance (ANOVA) followed by the Bonferroni post hoc test at a .05 level of significance. RESULTS: A miniscrew survival rate of 93% was observed in this study. The highest mean value of removal torque among the three postinsertion intervals (2.4 ± 0.59 Ncm) was obtained immediately after miniscrew insertion with a statistically significant difference from the other two time intervals (P < .001). Insertion were observed in this regard (P = .46). CONCLUSION: The stability of miniscrews was not affected by the insertion method. However, of the postinsertion time intervals, the highest removal torque values were obtained immediately after insertion.
Asunto(s)
Tornillos Óseos , Retención de Prótesis Dentales/normas , Remoción de Dispositivos/métodos , Métodos de Anclaje en Ortodoncia/métodos , Torque , Análisis de Varianza , Animales , Modelos Animales de Enfermedad , Perros , Fémur/cirugía , Masculino , Miniaturización , Factores de TiempoRESUMEN
A 12-year-old girl was referred to the orthodontic department of Kerman dental school with a chief complaint of two unerupted upper left & right front teeth. Patient had no significant medical & Dental history. Intra oral and radiographic examination revealed missing of two maxillary permanent central incisors. Orthodontic treatment involved two phases: Phase 1 Impacted maxillary central incisors: surgical exposure and force eruption with removable appliance. Phase 2: whip appliance is used to correct rotation of right permanent maxillary incisor.
Asunto(s)
Incisivo/patología , Maloclusión/terapia , Aparatos Ortodóncicos Removibles , Extrusión Ortodóncica , Diente Impactado/terapia , Niño , Femenino , Humanos , Maloclusión/complicaciones , Aparatos Ortodóncicos Funcionales , Extrusión Ortodóncica/instrumentación , Rotación , Diente Impactado/complicaciones , Diente Impactado/cirugía , TorqueRESUMEN
The following case report represents one of the applications of Fiber Reinforced Composites (FRC) in adjunctive orthodontics. In the case, a severely rotated centeral incisor was derotated using FRC as a mean for posterior anchorage control.
Asunto(s)
Resinas Compuestas , Métodos de Anclaje en Ortodoncia , Ortodoncia Correctiva/métodos , Adolescente , Análisis del Estrés Dental , Recubrimientos Dentinarios , Humanos , Incisivo/fisiopatología , Masculino , Maloclusión/terapia , Maxilar , Métodos de Anclaje en Ortodoncia/instrumentación , Alambres para OrtodonciaRESUMEN
INTRODUCTION: Conventional orthodontic techniques do not intrude posterior teeth effectively, and almost all methods result in anterior extrusion rather than posterior intrusion. New absolute anchorages (miniscrews and miniplates) are said to make posterior tooth intrusion possible. The aim of this study was to evaluate the clinical success of a new method for molar intrusion with miniscrews and its probable accompanying side effects. MATERIAL AND METHODS: Ten women with overerupted upper first molars participated in this study. Upper molar bands with brackets were cemented. Two miniscrews were placed, 1 in the mesiopalatal and another in the mesiobuccal aspect of the upper first molars; a spring made of 0.017 × 0.25-in titanium-molybdenum alloy (TMA) wire was used to apply 100 g of force through the attachments (50 g each side). Molar intrusion and external apical root resorption were evaluated by comparing parallel periapical radiographs with bite blocks at 3 intervals: beginning of treatment (T0), at the end of active treatment (T1), and 6 months after treatment completion (T2). RESULTS: The mean value of intrusion was 2.1 mm after completion of active treatment. On average, 0.4 ± 0.2 mm relapse had occurred during 6 months of retention, and the mean residual intrusion was 1.7 mm, which was statistically significant. Mean root resorption of 0.3 ± 0.2 mm for palatal root and 0.4 mm for mesiobuccal and distobuccal root was measured. CONCLUSIONS: Statistically significant intrusion (2.1 ± 0.9 mm) was obtained during active treatment. The mean value of relapse was 0.4 ± 0.2 mm, and the mean value for residual intrusion was 1.7 ± 0.6 mm. Minor apical root resorption occurred during treatment.
Asunto(s)
Oclusión Dental Traumática/terapia , Diente Molar/fisiopatología , Métodos de Anclaje en Ortodoncia/instrumentación , Técnicas de Movimiento Dental/instrumentación , Adulto , Tornillos Óseos , Oclusión Dental Traumática/diagnóstico por imagen , Análisis del Estrés Dental , Femenino , Humanos , Maxilar , Persona de Mediana Edad , Radiografía , Resorción Radicular/etiología , Estadísticas no Paramétricas , Erupción Dental , Técnicas de Movimiento Dental/efectos adversosRESUMEN
The following case report presents an appliance named Whip device used for the correction of severe rotations of anterior teeth in pre-adolescent patient. A 9-year-old boy with a severe 90 degrees rotation of upper left central incisor was treated with a Whip appliance. After 3 months of treatment, the position of the upper left central incisor was orthodontically corrected.
Asunto(s)
Incisivo/patología , Maloclusión/terapia , Diseño de Aparato Ortodóncico , Técnicas de Movimiento Dental/instrumentación , Niño , Recubrimiento Dental Adhesivo , Estudios de Seguimiento , Humanos , Masculino , Maxilar , Aparatos Ortodóncicos Removibles , Soportes Ortodóncicos , Alambres para OrtodonciaRESUMEN
BACKGROUND: Selection of the appropriate curing time and light direction may enable the appropriate shear bond strength to be obtained and avoid enamel fracture during debonding. AIMS: To determine the effects of different curing times and light directions on the shear bond strengths of ceramic and stainless steel brackets. METHOD: Ninety-two recently extracted, upper premolars were randomly assigned to six groups. Either stainless steel or ceramic brackets were bonded to the buccal surfaces of the teeth. Group I, stainless steel brackets cured for 40 seconds from buccal surface; Group II, stainless steel brackets cured for 40 seconds from palatal surface; Group III, stainless steel brackets cured for 80 seconds from palatal surface; Group IV, ceramic brackets cured for 40 seconds from the buccal surface; Group V, ceramic brackets cured for 40 seconds from the palatal surface; Group VI, ceramic brackets cured for 80 seconds from the palatal surface. The shear bond strength was measured with a universal testing machine and the resin remaining after debonding scored with the Adhesive Remnant Index (ARI). The data were analysed with the oneway ANOVA, Tukey's HSD test and the Kruskal-Wallis test. Associations between the ARI and shear bond strength were determined with Pearson's correlation coefficient. RESULTS: Group IV (ceramic brackets cured for 40 seconds from buccal surface) had the highest shear bond strength (21.26 MPa) and Group II (metal brackets cured for 40 seconds from palatal surface) had the lowest shear bond strength (6.95 MPa).There was no significant difference in ARI scores among the groups. The association between the ARI scores and bond strength values was not statistically significant. CONCLUSIONS: Curing from the buccal surface for 40 seconds gave unacceptably high shear bond strength values for both stainless steel and ceramic brackets. Lower shear bond strengths occurred when the light was directed from the palatal surface, but a shorter curing time is more likely to be preferred by clinicians. Future studies should investigate the possibility of reducing the curing time for both brackets.