Comparison of Multiple NIR Spectrometers for Detecting Low-Concentration Nitrogen-Based Adulteration in Protein Powders.

Protein adulteration is a common fraud in the food industry due to the high price of protein sources and their limited availability. Total nitrogen determination is the standard analytical technique for quality control, which is incapable of distinguishing between protein nitrogen and nitrogen from non-protein sources. Three benchtops and one handheld near-infrared spectrometer (NIRS) with different signal processing techniques (grating, Fourier transform, and MEM-micro-electro-mechanical system) were compared with detect adulteration in protein powders at low concentration levels. Whey, beef, and pea protein powders were mixed with a different combination and concentration of high nitrogen content compounds-namely melamine, urea, taurine, and glycine-resulting in a total of 819 samples. NIRS, combined with chemometric tools and various spectral preprocessing techniques, was used to predict adulterant concentrations, while the limit of detection (LOD) and limit of quantification (LOQ) were also assessed to further evaluate instrument performance. Out of all devices and measurement methods compared, the most accurate predictive models were built based on the dataset acquired with a grating benchtop spectrophotometer, reaching R2P values of 0.96 and proximating the 0.1% LOD for melamine and urea. Results imply the possibility of using NIRS combined with chemometrics as a generalized quality control tool for protein powders.

Near-infrared spectroscopy for rapid evaluation of winter cereals and Italian ryegrass forage mixtures.

Near-infrared (NIR) spectroscopy was employed to determine the differences between forage mixtures of winter cereals and Italian ryegrass and to evaluate fermentation characteristics of mixed silages. Forages were harvested on five phases (Cuts 1-5), with 1 week interval (n = 100). The yield of the last harvest (Cut 5) was ensiled and analyzed on four different days (D0, D7, D14, and D90) (n = 80). Principal component analysis based on the NIR data revealed differences according to the days of harvest, differences between winter cereals and Italian ryegrass forages, and differences in the fermentation stages of silages. The partial least square regression models for crude protein (CP), crude fiber (CF), and ash gave excellent determination coefficient in cross-validation (R2 CV > 0.9), while models for ether extract (EE) and total sugar content were weaker (R2 CV = 0.87 and 0.74, respectively). The values of root mean square error of cross-validation were 0.59, 0.76, 0.22, 0.31, and 2.36 %DM, for CP, CF, EE, ash, and total sugar, respectively. NIR proved to be an efficient tool in evaluating type and growth differences of the winter cereals and Italian ryegrass forage mixtures and the quality changes that occur during ensiling.

Trends in artificial aroma sensing by means of electronic nose technologies to advance dairy production - a review.

Controversies surrounding the name and how the electronics nose (e-nose) works have been at the center stage since the advent of the technology. Notwithstanding the controversies, the technology has gained popularity in the sensory analysis of dairy foods, because of its rapid results delivery on product aroma profile or pattern, which can be used to assess quality. This review critically evaluated the advances made in the application of the e-nose or artificial sensory system in the dairy industry, focusing on the evaluation of milk, yoghurt and cheese properties, and the trends and prospects of the technology. Most of the e-nose devices applied in the available scientific publications used sensors such as metal oxide semiconductor sensors (MOS), metal-oxide-semiconductor field-effect transistor (MOSFET), conducting polymers composites and quartz microbalance (QMB), and flame ionization detector FID, in a recent study. Though known for aroma sensing, the technology has been applied to evaluate the shelf life or microbial spoilage and to discriminate dairy products based on the volatile profile composition, as determined by the sensors. In most cases, the limitation of the technology is the inability of it to provide information on the nature of constituting compounds, except in gas chromatography and mass spectrometry-based e-nose systems.

Effect of omega-3 polyunsaturated fatty acid supplementation on oxidative stress parameters and sex hormone levels of modern genotype sows.

BACKGROUND: Sows are exposed to severe stress and hormonal challenges during their whole productive life. As polyunsaturated fatty acids play an important role in immune and reproductive functions, with a better understanding of their role in breeding sows' nutrition, improved performance and more sustainable pig production can be achieved. OBJECTIVES: In this study, we investigated the effects of omega-6 and omega-3 fatty acid supplementation on the antioxidant status and hormone levels of sows. METHODS: A total of 48 Danish Large white × Danish Landrace sows were supplemented either with sunflower oil (SO) as a control group or with fish oil (FO) as experimental group at the same dose of 10 g/kg feed. Blood samples were collected on day 14 of lactation, 5 days after weaning (insemination), and 30 days after insemination. To estimate antioxidant and reproductive effects, the amounts of reduced glutathione (GSH), thiobarbituric acid reactive substance, the activity of glutathione peroxidase (GPx), serum 17ß oestradiol (E2), progesterone (P4), and 6-keto prostaglandin F1α (6-keto PGF1α) levels were investigated. RESULTS: FO-based supplementation increased GPx activity on day 14 of lactation. Five days after weaning, the concentration of GSH in FO-fed sows was significantly higher than that in SO-fed sows. The E2 content of blood was significantly lower in the experimental group than in the control group for two of the three examined periods (day 14 of lactation and 30 days after insemination), whereas P4 levels were significantly higher in the experimental group 5 days after weaning. We found that 6-keto PGF1α levels were systematically lower in the experimental group throughout the trial. CONCLUSIONS: This study provides evidence of the major impact of omega-6 and -3 fatty acids on the tested hormone levels, which serve as precursors for the production of E2 and P4 but have an opposite effect on PGF2α production.

Micro-Encapsulated Microalgae Oil Supplementation Has No Systematic Effect on the Odor of Vanilla Shake-Test of an Electronic Nose.

In this study, we aimed to carry out the efficient fortification of vanilla milkshakes with micro-encapsulated microalgae oil (brand: S17-P100) without distorting the product's odor. A 10-step oil-enrichment protocol was developed using an inclusion rate of 0.2 to 2 w/w%. Fatty acid (FA) profile analysis was performed using methyl esters with the GC-MS technique, and the recovery of docosahexaenoic acid (C22:6 n3, DHA) was robust (r = 0.97, p < 0.001). The enrichment process increased the DHA level to 412 mg/100 g. Based on this finding, a flash-GC-based electronic nose (e-nose) was used to describe the product's odor. Applying principal component (PC) analysis to the acquired sensor data revealed that for the first four PCs, only PC3 (6.5%) showed a difference between the control and the supplemented products. However, no systematic pattern of odor profiles corresponding to the percentages of supplementation was observed within the PC planes. Similarly, when discriminant factor analysis (DFA) was applied, though a classification of the control and supplemented products, we obtained a validation score of 98%, and the classification pattern of the odor profiles did not follow a systematic format. Again, when a more targeted approach such as the partial least square regression (PLSR) was used on the most dominant sensors, a weak relationship (R2 = 0.50) was observed, indicating that there was no linear combination of the qualitative sensors' signals that could accurately describe the supplemented concentration variation. It can therefore be inferred that no detectable off-odor was present as a side effect of the increase in the oil concentration. Some volatile compounds of importance in regard to the odor, such as ethylacetate, ethyl-isobutarate, pentanal and pentyl butanoate, were found in the supplemented product. Although the presence of yeasts and molds was excluded from the product, ethanol was detected in all samples, but with an intensity that was insufficient to cause an off-odor.

The recent advances of near-infrared spectroscopy in dairy production-a review.

One of the major issues confronting the dairy industry is the efficient evaluation of the quality of feed, milk and dairy products. Over the years, the use of rapid analytical methods in the dairy industry has become imperative. This is because of the documented evidence of adulteration, microbial contamination and the influence of feed on the quality of milk and dairy products. Because of the delays involved in the use of wet chemistry methods during the evaluation of these products, rapid analytical techniques such as near-infrared spectroscopy (NIRS) has gained prominence and proven to be an efficient tool, providing instant results. The technique is rapid, nondestructive, precise and cost-effective, compared with other laboratory techniques. Handheld NIRS devices are easily used on the farm to perform quality control measures on an incoming feed from suppliers, during feed preparation, milking and processing of cheese, butter and yoghurt. This ensures that quality feed, milk and other dairy products are obtained. This review considers research articles published in reputable journals which explored the possible application of NIRS in the dairy industry. Emphasis was on what quality parameters were easily measured with NIRS, and the limitations in some instances.

Water Spectral Patterns Reveals Similarities and Differences in Rice Germination and Induced Degenerated Callus Development.

In vivo monitoring of rice (Oryza sativa L.) seed germination and seedling growth under general conditions in closed Petri dishes containing agar base medium at room temperature (temperature = 24.5 ± 1 °C, relative humidity = 76 ± 7% (average ± standard deviation)), and induced degenerated callus formation with plant growth regulator, were performed using short-wavelength near-infrared spectroscopy and aquaphotomics over A period of 26 days. The results of spectral analysis suggest changes in water absorbances due to the production of common metabolites, as well as increases in biomass and the sizes of the samples. Quantitative models built to predict the day of the development provided better accuracy for rice seedlings growth compared to callus formation. Eight common water bands were identified as presenting prominent changes in the absorbance pattern. The water matrix of only rice seedlings showed three developmental stages: firstly expressing a predominantly weakly hydrogen-bonded state, then a more strongly hydrogen-bonded state, and then, again, a weakly hydrogen-bonded state at the end. In rice callus induction and proliferation, no similar change in water absorbance pattern was observed. The presented findings indicate the potential of aquaphotomics for the in vivo detection of degeneration in cell development.

Non-invasive smooth muscle electromyography (SMEMG) as a novel monitoring technology of the gastrointestinal tract of awake, free-moving pigs-A pilot study.

There are several mathematical models and measurements to determine the efficiency of the digestibility of different feedstuffs. However, there is lack of information regarding the direct methods or measurement techniques used to analyse the physical response of the different parts of the gastrointestinal tract (GIT) of growing pigs to different diets. Smooth muscle electromyography (SMEMG) is a non-invasive method for the measurement of gastrointestinal myoelectrical activity. In the present study, SMEMG methodology has been adapted from laboratory rats to pigs, and the effects of feedstuffs with control (CTR) or experimentally increased (EXP) amounts of fibre were investigated on gastrointestinal tract motility. Nine barrow pigs ((Danish Landrace × Danish Yorkshire) × Danish Duroc) were used (30 ± 3 kg), and their CTR and EXP feedstuffs contained 29 and 49 g/kg crude fibre (CF), respectively. Myoelectric activities of the stomach, ileum and caecum were detected in the awake pigs by a pair of electrodes. The recorded myoelectric signals were analysed with fast Fourier transformation (FFT), and the spectra were expressed in GIT section-specific cycles per minutes (cpm) values and the maximum power spectrum density (PsDmax). A significant increase (P < 0.001) was observed in the value of the PsDmax of the small intestine (20-25 cpm) as a consequence of the EXP diet. The PsDmax values of the stomach (3-5 cpm) and large intestine (1-3 cpm) did not show any significant change in pigs fed the EXP diet. As a direct and non-invasive method, SMEMG is suitable for the rapid evaluation of the effects of diets with different fibre contents on the GIT of non-anaesthetised, free-moving pigs.

Electronic Nose for Monitoring Odor Changes of Lactobacillus Species during Milk Fermentation and Rapid Selection of Probiotic Candidates.

Probiotic bacteria have been associated with a unique production of aroma compounds in fermented foods but rapid methods for discriminating between foods containing probiotic, moderately probiotic, or non-probiotic bacteria remain aloof. An electronic nose (e-nose) is a high-sensitivity instrument capable of non-invasive volatile measurements of foods. In our study, we applied the e-nose to differentiate probiotic, moderately probiotic, and non-probiotic Lactobacillus bacteria strains at different fermentation time points (0th, 4th, and 11th) of milk fermentation. The pH of the changing milk medium was monitored with their corresponding increase in microbial cell counts. An e-nose with two gas chromatographic columns was used to develop classification models for the different bacteria groups and time points and to monitor the formation of the aromatic compounds during the fermentation process. Results of the e-nose showed good classification accuracy of the different bacteria groups at the 0th (74.44% for column 1 and 82.78% for column 2), the 4th (89.44% for column 1 and 92.22% for column 2), and the 11th (81.67% for column 1 and 81.67% for column 2) hour of fermentation. The loading vectors of the classification models showed the importance of some specific aroma compounds formed during the fermentation. Results show that aroma monitoring of the fermentation process with the e-nose is a promising and reliable analytical method for the rapid classification of bacteria strains according to their probiotic activity and for the monitoring of aroma changes during the fermentation process.

Historical Evolution and Food Control Achievements of Near Infrared Spectroscopy, Electronic Nose, and Electronic Tongue-Critical Overview.

Amid today's stringent regulations and rising consumer awareness, failing to meet quality standards often results in health and financial compromises. In the lookout for solutions, the food industry has seen a surge in high-performing systems all along the production chain. By virtue of their wide-range designs, speed, and real-time data processing, the electronic tongue (E-tongue), electronic nose (E-nose), and near infrared (NIR) spectroscopy have been at the forefront of quality control technologies. The instruments have been used to fingerprint food properties and to control food production from farm-to-fork. Coupled with advanced chemometric tools, these high-throughput yet cost-effective tools have shifted the focus away from lengthy and laborious conventional methods. This special issue paper focuses on the historical overview of the instruments and their role in food quality measurements based on defined food matrices from the Codex General Standards. The instruments have been used to detect, classify, and predict adulteration of dairy products, sweeteners, beverages, fruits and vegetables, meat, and fish products. Multiple physico-chemical and sensory parameters of these foods have also been predicted with the instruments in combination with chemometrics. Their inherent potential for speedy, affordable, and reliable measurements makes them a perfect choice for food control. The high sensitivity of the instruments can sometimes be generally challenging due to the influence of environmental conditions, but mathematical correction techniques exist to combat these challenges.

A Novel Tool for Visualization of Water Molecular Structure and Its Changes, Expressed on the Scale of Temperature Influence.

Aquaphotomics utilizes water-light interaction for in-depth exploration of water, its structure and role in aqueous and biologic systems. The aquagram, a major analytical tool of aquaphotomics, allows comparison of water molecular structures of different samples by comparing their respective absorbance spectral patterns. Temperature is the strongest perturbation of water changing almost all water species. To better interpret and understand spectral patterns, the objective of this work was to develop a novel, temperature-scaled aquagram that provides standardized information about changes in water molecular structure caused by solutes, with its effects translated to those which would have been caused by respective temperature changes. NIR spectra of Milli-Q water in the temperature range of 20-70 °C and aqueous solutions of potassium chloride in concentration range of 1 to 1000 mM were recorded to demonstrate the applicability of the proposed novel tool. The obtained results presented the influence of salt on the water molecular structure expressed as the equivalent effect of temperature in degrees of Celsius. The temperature-based aquagrams showed the well-known structure breaking and structure making effects of salts on water spectral pattern, for the first time presented in the terms of temperature influence on pure water. This new method enables comparison of spectral patterns providing a universal tool for evaluation of various bio-aqueous systems which can provide better insight into the system's functionality.

Emerging trends of advanced sensor based instruments for meat, poultry and fish quality- a review.

Meat and fish chemical composition and sensory attributes are markers of quality that require innovative assessment methods as existing ones are rather technical, laborious, and expensive. Emerging trends of advanced technology instruments have been lauded in the pharmaceutical, cosmetic and food industries for their high sensitivity, customizability, rapidness and affordability. Common among these, are the electronic tongue (e-tongue) and electronic nose (e-nose) but their use for meat and fish quality, remains scanty and scattered. This paper aims to systematically discuss the developing trends, principles and the recent use of e-tongue and e-nose for quality measurements in fish and meat. From over 90 research papers, it was observed that an arsenal of chemometric tools have been pivotal in applying these instruments for rapid quantitative, qualitative and predictive analysis of some physical properties, chemical properties, storability and the authentication of meat and fish. Both instruments require no reagent (waste free analytical procedure) and have been lauded for precision and*accuracy but e-nose may be better suited for meat and fish assessments. Unlike the e-tongue, e-nose requires no liquid sample preparation and portable versions are promising for rapid remote analysis of meat and fish samples that can save cost on transferring carcass to laboratories.

Multicomponent blood lipid analysis by means of near infrared spectroscopy, in geese.

This study provides accurate near infrared (NIR) spectroscopic models on some laboratory determined clinicochemical parameters (i.e. total lipid (5.57±1.95 g/l), triglyceride (2.59±1.36 mmol/l), total cholesterol (3.81±0.68 mmol/l), high density lipoprotein (HDL) cholesterol (2.45±0.58 mmol/l)) of blood serum samples of fattened geese. To increase the performance of multivariate chemometrics, samples significantly deviating from the regression models implying laboratory error were excluded from the final calibration datasets. Reference data of excluded samples having outlier spectra in principal component analysis were not marked as false. Samples deviating from the regression models but having non outlier spectra in PCA were identified as having false reference constituent values. Based on the NIR selection methods, 5% of the reference measurement data were rated as doubtful. The achieved models reached R(2) of 0.864, 0.966, 0.850, 0.793, and RMSE of 0.639 g/l, 0.232 mmol/l, 0.210 mmol/l, 0.241 mmol/l for total lipid, triglyceride, total cholesterol and HDL cholesterol, respectively, during independent validation. Classical analytical techniques focus on single constituents and often require chemicals, time-consuming measurements, and experienced technicians. NIR technique provides a quick, cost effective, non-hazardous alternative method for analysis of several constituents based on one single spectrum of each sample, and it also offers the possibility for looking at the laboratory reference data critically. Evaluation of reference data to identify and exclude falsely analyzed samples can provide warning feedback to the reference laboratory, especially in the case of analyses where laboratory methods are not perfectly suited to the subjected material and there is an increased chance of laboratory error.

Evaluating Spectral Signals to Identify Spectral Error.

Since the precision and accuracy level of a chemometric model is highly influenced by the quality of the raw spectral data, it is very important to evaluate the recorded spectra and describe the erroneous regions before qualitative and quantitative analyses or detailed band assignment. This paper provides a collection of basic spectral analytical procedures and demonstrates their applicability in detecting errors of near infrared data. Evaluation methods based on standard deviation, coefficient of variation, mean centering and smoothing techniques are presented. Applications of derivatives with various gap sizes, even below the bandpass of the spectrometer, are shown to evaluate the level of spectral errors and find their origin. The possibility for prudent measurement of the third overtone region of water is also highlighted by evaluation of a complex data recorded with various spectrometers.