Utility Analyses of AVITI Sequencing Chemistry.

BACKGROUND: DNA sequencing is a critical tool in modern biology. Over the last two decades, it has been revolutionized by the advent of massively parallel sequencing, leading to significant advances in the genome and transcriptome sequencing of various organisms. Nevertheless, challenges with accuracy, lack of competitive options and prohibitive costs associated with high throughput parallel short-read sequencing persist. RESULTS: Here, we conduct a comparative analysis using matched DNA and RNA short-reads assays between Element Biosciences AVITI chemistry and Illumina NextSeq 550. Similar comparisons were evaluated for synthetic long-read sequencing for RNA and targeted single-cell transcripts between the AVITI and Illumina NovaSeq 6000. For both DNA and RNA short-read applications, the study found that the AVITI produced significantly higher per sequence quality scores. For PCR-free DNA libraries, we observed up to a 10-fold lower experimentally determined error rate for using the AVITI chemistry compared to the NextSeq 550. For short-read RNA quantification, both AVITI and the NextSeq 550 demonstrated comparable accuracy. With regards to synthetic long-read mRNA and targeted synthetic long read single cell mRNA sequencing, both platforms respective chemistries performed comparably in quantification of genes and isoforms. The AVITI displayed a marginally lower error rate for long reads, with fewer chemistry-specific errors and a higher mutation detection rate. CONCLUSION: These results point to the potential of the AVITI platform as a competitive candidate in high-throughput short read sequencing analyses when juxtaposed with the Illumina NextSeq 550.

Long-read single-cell sequencing reveals expressions of hypermutation clusters of isoforms in human liver cancer cells.

The protein diversity of mammalian cells is determined by arrays of isoforms from genes. Genetic mutation is essential in species evolution and cancer development. Accurate long-read transcriptome sequencing at single-cell level is required to decipher the spectrum of protein expressions in mammalian organisms. In this report, we developed a synthetic long-read single-cell sequencing technology based on LOOPSeq technique. We applied this technology to analyze 447 transcriptomes of hepatocellular carcinoma (HCC) and benign liver from an individual. Through Uniform Manifold Approximation and Projection analysis, we identified a panel of mutation mRNA isoforms highly specific to HCC cells. The evolution pathways that led to the hyper-mutation clusters in single human leukocyte antigen molecules were identified. Novel fusion transcripts were detected. The combination of gene expressions, fusion gene transcripts, and mutation gene expressions significantly improved the classification of liver cancer cells versus benign hepatocytes. In conclusion, LOOPSeq single-cell technology may hold promise to provide a new level of precision analysis on the mammalian transcriptome.

Long-read single-cell sequencing reveals expressions of hypermutation clusters of isoforms in human liver cancer cells.

The protein diversity of mammalian cells is determined by arrays of isoforms from genes. Genetic mutation is essential in species evolution and cancer development. Accurate Long-read transcriptome sequencing at single-cell level is required to decipher the spectrum of protein expressions in mammalian organisms. In this report, we developed a synthetic long-read single-cell sequencing technology based on LOOPseq technique. We applied this technology to analyze 447 transcriptomes of hepatocellular carcinoma (HCC) and benign liver from an individual. Through Uniform Manifold Approximation and Projection (UMAP) analysis, we identified a panel of mutation mRNA isoforms highly specific to HCC cells. The evolution pathways that led to the hyper-mutation clusters in single human leukocyte antigen (HLA) molecules were identified. Novel fusion transcripts were detected. The combination of gene expressions, fusion gene transcripts, and mutation gene expressions significantly improved the classification of liver cancer cells versus benign hepatocytes. In conclusion, LOOPseq single-cell technology may hold promise to provide a new level of precision analysis on the mammalian transcriptome.

Targeted transcriptome analysis using synthetic long read sequencing uncovers isoform reprograming in the progression of colon cancer.

The characterization of human gene expression is limited by short read lengths, high error rates and large input requirements. Here, we used a synthetic long read (SLR) sequencing approach, LoopSeq, to generate accurate sequencing reads that span full length transcripts using standard short read data. LoopSeq identified isoforms from control samples with 99.4% accuracy and a 0.01% per-base error rate, exceeding the accuracy reported for other long-read technologies. Applied to targeted transcriptome sequencing from colon cancers and their metastatic counterparts, LoopSeq revealed large scale isoform redistributions from benign colon mucosa to primary colon cancer and metastatic cancer and identified several previously unknown fusion isoforms. Strikingly, single nucleotide variants (SNVs) occurred dominantly in specific isoforms and some SNVs underwent isoform switching in cancer progression. The ability to use short reads to generate accurate long-read data as the raw unit of information holds promise as a widely accessible approach in transcriptome sequencing.

Synthesis and cell-free cloning of DNA libraries using programmable microfluidics.

Microfluidics may revolutionize our ability to write synthetic DNA by addressing several fundamental limitations associated with generating novel genetic constructs. Here we report the first de novo synthesis and cell-free cloning of custom DNA libraries in sub-microliter reaction droplets using programmable digital microfluidics. Specifically, we developed Programmable Order Polymerization (POP), Microfluidic Combinatorial Assembly of DNA (M-CAD) and Microfluidic In-vitro Cloning (MIC) and applied them to de novo synthesis, combinatorial assembly and cell-free cloning of genes, respectively. Proof-of-concept for these methods was demonstrated by programming an autonomous microfluidic system to construct and clone libraries of yeast ribosome binding sites and bacterial Azurine, which were then retrieved in individual droplets and validated. The ability to rapidly and robustly generate designer DNA molecules in an autonomous manner should have wide application in biological research and development.

Rationally designed, heterologous S. cerevisiae transcripts expose novel expression determinants.

Deducing generic causal relations between RNA transcript features and protein expression profiles from endogenous gene expression data remains a major unsolved problem in biology. The analysis of gene expression from heterologous genes contributes significantly to solving this problem, but has been heavily biased toward the study of the effect of 5' transcript regions and to prokaryotes. Here, we employ a synthetic biology driven approach that systematically differentiates the effect of different regions of the transcript on gene expression up to 240 nucleotides into the ORF. This enabled us to discover new causal effects between features in previously unexplored regions of transcripts, and gene expression in natural regimes. We rationally designed, constructed, and analyzed 383 gene variants of the viral HRSVgp04 gene ORF, with multiple synonymous mutations at key positions along the transcript in the eukaryote S. cerevisiae. Our results show that a few silent mutations at the 5'UTR can have a dramatic effect of up to 15 fold change on protein levels, and that even synonymous mutations in positions more than 120 nucleotides downstream from the ORF 5'end can modulate protein levels up to 160%-300%. We demonstrate that the correlation between protein levels and folding energy increases with the significance of the level of selection of the latter in endogenous genes, reinforcing the notion that selection for folding strength in different parts of the ORF is related to translation regulation. Our measured protein abundance correlates notably(correlation up to r = 0.62 (p=0.0013)) with mean relative codon decoding times, based on ribosomal densities (Ribo-Seq) in endogenous genes, supporting the conjecture that translation elongation and adaptation to the tRNA pool can modify protein levels in a causal/direct manner. This report provides an improved understanding of transcript evolution, design principles of gene expression regulation, and suggests simple rules for engineering synthetic gene expression in eukaryotes.

DNA-library assembly programmed by on-demand nano-liter droplets from a custom microfluidic chip.

Nanoscale synthetic biology can benefit from programmable nanoliter-scale processing of DNA in microfluidic chips if they are interfaced effectively to biochemical arrays such as microwell plates. Whereas active microvalve chips require complex fabrication and operation, we show here how a passive and readily fabricated microchip can be employed for customizable nanoliter scale pipetting and reaction control involving DNA. This recently developed passive microfluidic device, supporting nanoliter scale combinatorial droplet generation and mixing, is here used to generate a DNA test library with one member per droplet exported to addressed locations on microwell plates. Standard DNA assembly techniques, such as Gibson assembly, compatible with isothermal on-chip operation, are employed and checked using off-chip PCR and assembly PCR. The control of output droplet sequences and mixing performance was verified using dyes and fluorescently labeled DNA solutions, both on-chip and in external capillary channels. Gel electrophoresis of products and DNA sequencing were employed to further verify controlled combination and functional enzymatic assembly. The scalability of the results to larger DNA libraries is also addressed by combinatorial input expansion using sequential injection plugs from a multiwell plate. Hence, the paper establishes a proof of principle of the production of functional combinatorial mixtures at the nanoliter scale for one sequence per well DNA libraries.

Computational methods for the construction, editing, and error correction of DNA molecules and their libraries.

The field of synthetic biology is fueled by steady advances in our ability to produce designer genetic material on demand. This relatively new technological capability stems from advancements in DNA construction biochemistry as well as supporting computational technologies such as tools for specifying large DNA libraries, as well as planning and optimizing their actual physical construction. In particular, the design, planning, and construction of user specified, combinatorial DNA libraries are of increasing interest. Here we present some of the computational tools we have built over the past decade to support the multidisciplinary task of constructing DNA molecules and their libraries. These technologies encompass computational methods for [1] planning and optimizing the construction of DNA molecules and libraries, [2] the utilization of existing natural or synthetic fragments, [3] identification of shared fragments, [4] planning primers and overlaps, [5] minimizing the number of assembly steps required, and (6) correcting erroneous constructs. Other computational technologies that are important in the overall process of DNA construction, such as [1] computational tools for efficient specification and intuitive visualization of large DNA libraries (which aid in debugging library design pre-construction) and [2] automated liquid handling robotic programming [Linshiz et al., Mol Syst Biol 4:191, 2008; Shabi et al., Syst Synth Biol 4:227-236, 2010], which aid in the construction process itself, have been omitted due to length limitations.

Accurate, model-based tuning of synthetic gene expression using introns in S. cerevisiae.

Introns are key regulators of eukaryotic gene expression and present a potentially powerful tool for the design of synthetic eukaryotic gene expression systems. However, intronic control over gene expression is governed by a multitude of complex, incompletely understood, regulatory mechanisms. Despite this lack of detailed mechanistic understanding, here we show how a relatively simple model enables accurate and predictable tuning of synthetic gene expression system in yeast using several predictive intron features such as transcript folding and sequence motifs. Using only natural Saccharomyces cerevisiae introns as regulators, we demonstrate fine and accurate control over gene expression spanning a 100 fold expression range. These results broaden the engineering toolbox of synthetic gene expression systems and provide a framework in which precise and robust tuning of gene expression is accomplished.

Heuristic for maximizing DNA reuse in synthetic DNA library assembly.

De novo DNA synthesis is in need of new ideas for increasing production rate and reducing cost. DNA reuse in combinatorial library construction is one such idea. Here, we describe an algorithm for planning multistage assembly of DNA libraries with shared intermediates that greedily attempts to maximize DNA reuse, and show both theoretically and empirically that it runs in linear time. We compare solution quality and algorithmic performance to the best results reported for computing DNA assembly graphs, finding that our algorithm achieves solutions of equivalent quality but with dramatically shorter running times and substantially improved scalability. We also show that the related computational problem bounded-depth min-cost string production (BDMSP), which captures DNA library assembly operations with a simplified cost model, is NP-hard and APX-hard by reduction from vertex cover. The algorithm presented here provides solutions of near-minimal stages and thanks to almost instantaneous planning of DNA libraries it can be used as a metric of "manufacturability" to guide DNA library design. Rapid planning remains applicable even for DNA library sizes vastly exceeding today's biochemical assembly methods, future-proofing our method.

A synthetic biology approach for evaluating the functional contribution of designer cellulosome components to deconstruction of cellulosic substrates.

BACKGROUND: Select cellulolytic bacteria produce multi-enzymatic cellulosome complexes that bind to the plant cell wall and catalyze its efficient degradation. The multi-modular interconnecting cellulosomal subunits comprise dockerin-containing enzymes that bind cohesively to cohesin-containing scaffoldins. The organization of the modules into functional polypeptides is achieved by intermodular linkers of different lengths and composition, which provide flexibility to the complex and determine its overall architecture. RESULTS: Using a synthetic biology approach, we systematically investigated the spatial organization of the scaffoldin subunit and its effect on cellulose hydrolysis by designing a combinatorial library of recombinant trivalent designer scaffoldins, which contain a carbohydrate-binding module (CBM) and 3 divergent cohesin modules. The positions of the individual modules were shuffled into 24 different arrangements of chimaeric scaffoldins. This basic set was further extended into three sub-sets for each arrangement with intermodular linkers ranging from zero (no linkers), 5 (short linkers) and native linkers of 27-35 amino acids (long linkers). Of the 72 possible scaffoldins, 56 were successfully cloned and 45 of them expressed, representing 14 full sets of chimaeric scaffoldins. The resultant 42-component scaffoldin library was used to assemble designer cellulosomes, comprising three model C. thermocellum cellulases. Activities were examined using Avicel as a pure microcrystalline cellulose substrate and pretreated cellulose-enriched wheat straw as a model substrate derived from a native source. All scaffoldin combinations yielded active trivalent designer cellulosome assemblies on both substrates that exceeded the levels of the free enzyme systems. A preferred modular arrangement for the trivalent designer scaffoldin was not observed for the three enzymes used in this study, indicating that they could be integrated at any position in the designer cellulosome without significant effect on cellulose-degrading activity. Designer cellulosomes assembled with the long-linker scaffoldins achieved higher levels of activity, compared to those assembled with short-and no-linker scaffoldins. CONCLUSIONS: The results demonstrate the robustness of the cellulosome system. Long intermodular scaffoldin linkers are preferable, thus leading to enhanced degradation of cellulosic substrates, presumably due to the increased flexibility and spatial positioning of the attached enzymes in the complex. These findings provide a general basis for improved designer cellulosome systems as a platform for bioethanol production.

Mapping the translation initiation landscape of an S. cerevisiae gene using fluorescent proteins.

Accurate and efficient gene expression requires that protein translation initiates from mRNA transcripts with high fidelity. At the same time, indiscriminate initiation of translation from multiple ATG start-sites per transcript has been demonstrated, raising fundamental questions regarding the rate and rationale governing alternative translation initiation. We devised a sensitive fluorescent reporter assay for monitoring alternative translation initiation. To demonstrate it, we map the translation initiation landscape of a Saccharomyces cerevisiae gene (RMD1) with a typical ATG sequence context profile. We found that up to 3%-5% of translation initiation events occur from alternative out-of-frame start codons downstream of the main ATG. Initiation from these codons follows the ribosome scanning model: initiation rates from different start sites are determined by ATG order, rather than their context strength. Genomic analysis of S. cerevisiae further supports the scanning model: ATG codons downstream rather than upstream of the main ATG tend to have higher context scores.

Programmable in vivo selection of arbitrary DNA sequences.

The extraordinary fidelity, sensory and regulatory capacity of natural intracellular machinery is generally confined to their endogenous environment. Nevertheless, synthetic bio-molecular components have been engineered to interface with the cellular transcription, splicing and translation machinery in vivo by embedding functional features such as promoters, introns and ribosome binding sites, respectively, into their design. Tapping and directing the power of intracellular molecular processing towards synthetic bio-molecular inputs is potentially a powerful approach, albeit limited by our ability to streamline the interface of synthetic components with the intracellular machinery in vivo. Here we show how a library of synthetic DNA devices, each bearing an input DNA sequence and a logical selection module, can be designed to direct its own probing and processing by interfacing with the bacterial DNA mismatch repair (MMR) system in vivo and selecting for the most abundant variant, regardless of its function. The device provides proof of concept for programmable, function-independent DNA selection in vivo and provides a unique example of a logical-functional interface of an engineered synthetic component with a complex endogenous cellular system. Further research into the design, construction and operation of synthetic devices in vivo may lead to other functional devices that interface with other complex cellular processes for both research and applied purposes.

Computer-aided high-throughput cloning of bacteria in liquid medium.

Bacterial cloning was first introduced over a century ago and has since become one of the most useful procedures in biological research, perhaps paralleled in its ubiquity only by PCR and DNA sequencing. However, unlike PCR and sequencing, cloning has generally remained a manual, labor-intensive, low-throughput procedure. Here we address this issue by developing an automated, computer-aided bacterial cloning method using liquid medium that is based on the principles of (i) limiting dilution of bacteria, (ii) inference of colony forming units (CFUs) based on optical density (OD) readings, and (iii) verification of monoclonality using a mixture of differently colored fluorescently labeled bacteria for transformation. We demonstrate the high-throughput utility of this method by employing it as a cloning platform for a DNA synthesis process.

De novo DNA synthesis using single molecule PCR.

The throughput of DNA reading (sequencing) has dramatically increased recently due to the incorporation of in vitro clonal amplification. The throughput of DNA writing (synthesis) is trailing behind, with cloning and sequencing constituting the main bottleneck. To overcome this bottleneck, an in vitro alternative for in vivo DNA cloning must be integrated into DNA synthesis methods. Here we show how a new single molecule PCR (smPCR)-based procedure can be employed as a general substitute to in vivo cloning thereby allowing for the first time in vitro DNA synthesis. We integrated this rapid and high fidelity in vitro procedure into our earlier recursive DNA synthesis and error correction procedure and used it to efficiently construct and error-correct a 1.8-kb DNA molecule from synthetic unpurified oligos completely in vitro. Although we demonstrate incorporating smPCR in a particular method, the approach is general and can be used in principle in conjunction with other DNA synthesis methods as well.