RESUMEN
Ammonia (NH3) is a key commodity chemical for the agricultural, textile and pharmaceutical industries, but its production via the Haber-Bosch process is carbon-intensive and centralized. Alternatively, an electrochemical method could enable decentralized, ambient NH3 production that can be paired with renewable energy. The first verified electrochemical method for NH3 synthesis was a process mediated by lithium (Li) in organic electrolytes. So far, however, elements other than Li remain unexplored in this process for potential benefits in efficiency, reaction rates, device design, abundance and stability. In our demonstration of a Li-free system, we found that calcium can mediate the reduction of nitrogen for NH3 synthesis. We verified the calcium-mediated process using a rigorous protocol and achieved an NH3 Faradaic efficiency of 40 ± 2% using calcium tetrakis(hexafluoroisopropyloxy)borate (Ca[B(hfip)4]2) as the electrolyte. Our results offer the possibility of using abundant materials for the electrochemical production of NH3, a critical chemical precursor and promising energy vector.
RESUMEN
In situ techniques are essential to understanding the behavior of electrocatalysts under operating conditions. When employed, in situ synchrotron grazing-incidence X-ray diffraction (GI-XRD) can provide time-resolved structural information of materials formed at the electrode surface. In situ cells, however, often require epoxy resins to secure electrodes, do not enable electrolyte flow, or exhibit limited chemical compatibility, hindering the study of non-aqueous electrochemical systems. Here, a versatile electrochemical cell for air-free in situ synchrotron GI-XRD during non-aqueous Li-mediated electrochemical N2 reduction (Li-N2R) has been designed. This cell not only fulfills the stringent material requirements necessary to study this system but is also readily extendable to other electrochemical systems. Under conditions relevant to non-aqueous Li-N2R, the formation of Li metal, LiOH and Li2O as well as a peak consistent with the α-phase of Li3N was observed, thus demonstrating the functionality of this cell toward developing a mechanistic understanding of complicated electrochemical systems.
RESUMEN
The quest of a nonlinear optical material that can be easily nanostructured over a large surface area is still ongoing. Here, we demonstrate a nanoimprinted nonlinear barium titanate 2D nanohole array that shows the optical properties of a 2D photonic crystal and a metasurface, depending on the direction of the optical axis. The challenge of nanostructuring the inert metal-oxide is resolved by direct soft nanoimprint lithography with sol-gel derived barium titanate enabling critical dimensions of 120 nm with aspect ratios of five. The nanohole array exhibits a photonic bandgap in the infrared range when probed along the slab axis, while lattice resonant states are observed in out-of-plane transmission configuration. The enhanced light-matter interaction from the resonant structure enables to increase in the second-harmonic generation in the near-ultraviolet by a factor of 18 illustrating the potential in the flexible fabrication technique for barium titanate photonic devices.
RESUMEN
Electrocatalysis offers great promise for water purification but is limited by low active area and high uncontrollability of electrocatalysts. To overcome these constraints, we propose hybrid bulk electrodes by synthesizing and binding a Pd nanocatalyst (nano-Pd) to the electrodes via amyloid fibrils (AFs). The AFs template is effective for controlling the nucleation, growth, and assembly of nano-Pd on the electrode. In addition, the three-dimensional hierarchically porous nanostructure of AFs is beneficial for loading high-density nano-Pd with a large active area. The novel hybrid cathodes exhibit superior electroreduction performance for the detoxification of hexavalent chromium (Cr6+ ), 4-chlorophenol, and trichloroacetic acid in wastewater and drinking water. This study provides a proof-of-concept design of an AFs-templated nano-Pd-based hybrid electrode, which constitutes a paradigm shift in electrocatalytic water purification, and broadens the horizon of its potential engineered applications.
Asunto(s)
Amiloide/química , Nanopartículas del Metal/química , Paladio/química , Contaminantes Químicos del Agua/aislamiento & purificación , Purificación del Agua , Catálisis , Clorofenoles/química , Clorofenoles/aislamiento & purificación , Cromo/química , Cromo/aislamiento & purificación , Electricidad , Electrodos , Ácido Tricloroacético/química , Ácido Tricloroacético/aislamiento & purificación , Contaminantes Químicos del Agua/químicaRESUMEN
Detailed understanding of charge diffusion processes in a lithium-ion battery is crucial to enable its systematic improvement. Experimental investigation of diffusion at the interface between active particles and the electrolyte is challenging but warrants investigation as it can introduce resistances that, for example, limit the charge and discharge rates. Here, we show an approach to study diffusion at interfaces using muon spin spectroscopy. By performing measurements on LiFePO4 platelets with different sizes, we determine how diffusion through the LiFePO4 (010) interface differs from that in the center of the particle (i.e., bulk diffusion). We perform ab initio calculations to aid the understanding of the results and show the relevance of our interfacial diffusion measurement to electrochemical performance through cyclic voltammetry measurements. These results indicate that surface engineering can be used to improve the performance of lithium-ion batteries.
RESUMEN
At the turn of the year 2018/19, a new ICD-10 code (E78.0A) will be introduced in Sweden for the hereditary blood lipid disorder familial hypercholesterolemia (FH). Patients with FH have a significantly increased risk of developing atherosclerotic disease, such as myocardial infarction before the age of 50. However, early diagnosis and start of treatment of FH can ameliorate the disease's negative long term effects. The Swedish National Board of Health and Welfare gave in its guidelines from 2015 a high priority to the work of identifying and diagnosing individuals with FH in the general population. The introduction of the ICD-10 code E78.0A for FH may, when properly used, be an effective tool in this work.