RESUMEN
The "cytokine storm" often induced in COVID-19 patients contributes to the onset of "acute respiratory distress syndrome" (ARDS) accompanied by lung infection and damage, multiorgan failure, and even death. This large increase in pro-inflammatory cytokines in blood may be related to severity. Rapid, on-demand cytokine analyses can thus be critical to inform treatment plans and improve survival rates. Here, we report a sensitive, low-cost, semiautomated 3D-printed microfluidic immunoarray to detect 2 cytokines and CRP simultaneously in a single 10 µL serum sample in 25 min. Accuracy was validated by analyzing 80 COVID-19 patient serum samples, with results well correlated to a commercial Meso Scale protein immunoassay. Capture antibodies immobilized in detection microwells in a flat well plate-type flow chamber facilitate the immunoassay, with a programmable syringe pump automatically delivering reagents. Chemiluminescence signals were captured in a dark box with a CCD camera integrated for 30 s. This system was optimized to detect inflammation biomarkers IL-6, IFN-γ, and CRP simultaneously in blood serum. Ultralow limits of detection (LODs) of 0.79 fg/mL for IL-6, 4.2 fg/mL for CRP, and 2.7 fg/mL for IFN-γ with dynamic ranges of up to 100 pg/mL were achieved. ROC statistical analyses showed a relatively good diagnostic value related to the samples assigned WHO COVID-19 scores for disease severity, with the best results for IL-6 and CRP. Monitoring these biomarkers for coronavirus severity may allow prediction of disease severity as a basis for critical treatment decisions and better survival rates.
RESUMEN
Microfluidic technology has revolutionized device fabrication by merging principles of fluid dynamics with technologies from chemistry, physics, biology, material science, and microelectronics. Microfluidic systems manipulate small volumes of fluids to perform automated tasks with applications ranging from chemical syntheses to biomedical diagnostics. The advent of low-cost 3D printers has revolutionized the development of microfluidic systems. For measuring molecules, 3D printing offers cost-effective, time, and ease-of-designing benefits. In this paper, we present a comprehensive tutorial for design, optimization, and validation for creating a 3D-printed microfluidic immunoarray for ultrasensitive detection of multiple protein biomarkers. The target is the development of a point of care array to determine five protein biomarkers for aggressive cancers. The design phase involves defining dimensions of microchannels, reagent chambers, detection wells, and optimizing parameters and detection methods. In this study, the physical design of the array underwent multiple iterations to optimize key features, such as developing open detection wells for uniform signal distribution and a flap for covering wells during the assay. Then, full signal optimization for sensitivity and limit of detection (LOD) was performed, and calibration plots were generated to assess linear dynamic ranges and LODs. Varying characteristics among biomarkers highlighted the need for tailored assay conditions. Spike-recovery studies confirmed the assay's accuracy. Overall, this paper showcases the methodology, rigor, and innovation involved in designing a 3D-printed microfluidic immunoarray. Optimized parameters, calibration equations, and sensitivity and accuracy data contribute valuable metrics for future applications in biomarker analyses.
RESUMEN
Detecting cancer at an early stage of disease progression promises better treatment outcomes and longer lifespans for cancer survivors. Research has been directed towards the development of accessible and highly sensitive cancer diagnostic tools, many of which rely on protein biomarkers and biomarker panels which are overexpressed in body fluids and associated with different types of cancer. Protein biomarker detection for point-of-care (POC) use requires the development of sensitive, noninvasive liquid biopsy cancer diagnostics that overcome the limitations and low sensitivities associated with current dependence upon imaging and invasive biopsies. Among many endeavors to produce user-friendly, semi-automated, and sensitive protein biomarker sensors, 3D printing is rapidly becoming an important contemporary tool for achieving these goals. Supported by the widely available selection of affordable desktop 3D printers and diverse printing options, 3D printing is becoming a standard tool for developing low-cost immunosensors that can also be used to make final commercial products. In the last few years, 3D printing platforms have been used to produce complex sensor devices with high resolution, tailored towards researchers' and clinicians' needs and limited only by their imagination. Unlike traditional subtractive manufacturing, 3D printing, also known as additive manufacturing, has drastically reduced the time of sensor and sensor array development while offering excellent sensitivity at a fraction of the cost of conventional technologies such as photolithography. In this review, we offer a comprehensive description of 3D printing techniques commonly used to develop immunosensors, arrays, and microfluidic arrays. In addition, recent applications utilizing 3D printing in immunosensors integrated with different signal transduction strategies are described. These applications include electrochemical, chemiluminescent (CL), and electrochemiluminescent (ECL) 3D-printed immunosensors. Finally, we discuss current challenges and limitations associated with available 3D printing technology and future directions of this field.
Asunto(s)
Técnicas Biosensibles , Microfluídica , Neoplasias , Impresión Tridimensional , Neoplasias/diagnósticoRESUMEN
We report here the fabrication and validation of a novel 3D-printed, automated immunoarray to detect multiple proteins with ultralow detection limits. This low cost, miniature immunoarray employs electrochemiluminescent (ECL) detection measured with a CCD camera and employs touch-screen control of a micropump to facilitate automated use. The miniaturized array features prefilled reservoirs to deliver sample and reagents to a paper-thin pyrolytic graphite microwell detection chip to complete sandwich immunoassays. The detection chip achieves high sensitivity by using single-wall carbon nanotube-antibody conjugates in the microwells and employing massively labeled antibody-decorated RuBPY-silica nanoparticles to generate ECL. The total cost of an array is $0.65, and an eight-protein assay can be done in duplicate for $0.14 per protein with limits of detection (LOD) as low as 78-110 fg mL-1 in diluted serum. The electronic control system costs $210 in components. Utility of the automated immunoarray was demonstrated by detecting an eight-protein prostate cancer biomarker panel in human serum samples in 25 min. The system is well suited to future clinical and point-of-care diagnostic testing and could be used in resource-limited environments.
Asunto(s)
Automatización , Biomarcadores de Tumor/sangre , Técnicas Analíticas Microfluídicas , Nanoestructuras/química , Proteínas de Neoplasias/sangre , Impresión Tridimensional , Neoplasias de la Próstata/sangre , Línea Celular Tumoral , Humanos , Masculino , Técnicas Analíticas Microfluídicas/instrumentación , Impresión Tridimensional/instrumentación , Neoplasias de la Próstata/diagnósticoRESUMEN
Low cost, miniaturized assay platforms that work with small sample volumes, high sensitivity and rapid detection will have high value in future biomolecular diagnostics. Herein we report an automated, 3D printed electrochemiluminescent (ECL) immunoarray integrated with a nanostructured pyrolytic graphite sheet (PGS) microwell chip configured to detect 2 proteins simultaneously from complex liquid samples with high sensitivity and selectivity. Assays are done in 18 min at cost of < $1.00 using 1-2 microliters of sample. 3D printed microfluidic array design integrates reagent and sample chambers with rapid ECL detection. A commercial programmable syringe pump used with a preset program allows pump to pause and resume reagent delivery as required for completion of the sandwich immunoassays. Nanostructured surfaces feature antibody-decorated single wall carbon nanotube forests on PGS chip microwells, and sensitivity is amplified via massively labeled RuBPY-silica nanoparticles for detection. Prostate specific antigen (PSA) and prostate specific membrane antigen (PSMA) were measured simultaneously from human serum on the immunoarray with detection limits 150 fg mL-1 for PSA and 230 fg mL-1 for PSMA, with dynamic ranges up to 5 ng mL-1. Validation of the immunoarray by measuring these proteins in human serum showed good correlation with single protein ELISA. These 3D printed platforms can be easily adapted to multiple applications and configurable CAD files for the immunoarray can be downloaded from our lab's website.