Comprehensive comparison of water quality risk and microbial ecology between new and old cast iron pipe distribution systems.

The effects of cast iron pipe corrosion on water quality risk and microbial ecology in drinking water distribution systems (DWDSs) were investigated. It was found that trihalomethane (THMs) concentration and antibiotic resistance genes (ARGs) increased sharply in the old DWDSs. Under the same residual chlorine concentration conditions, the adenosine triphosphate concentration in the effluent of old DWDSs (Eff-old) was significantly higher than that in the effluent of new DWDSs. Moreover, stronger bioflocculation ability and weaker hydrophobicity coexisted in the extracellular polymeric substances of Eff-old, meanwhile, iron particles could be well inserted into the structure of the biofilms to enhance the mechanical strength and stability of the biofilms, hence enhancing the formation of THMs. Old DWDSs significantly influenced the microbial community of bulk water and triggered stronger microbial antioxidant systems response, resulting in higher ARGs abundance. Corroded cast iron pipes induced a unique interaction system of biofilms, chlorine, and corrosion products. Therefore, as the age of cast iron pipes increases, the fluctuation of water quality and microbial ecology should be paid more attention to maintain the safety of tap water.

Perspective on inorganic electron donor-mediated biological denitrification process for low C/N wastewaters.

Nitrate is the most common water environmental pollutant in the world. Inorganic electron donor-mediated denitrification is a typical process with significant advantages in treating low carbon-nitrogen ratio water and wastewater and has attracted extensive research attention. This review summarizes the denitrification processes using inorganic substances, including hydrogen, reductive sulfur compounds, zero-valent iron, and iron oxides, ammonium nitrogen, and other reductive heavy metal ions as electron donors. Aspects on the functional microorganisms, critical metabolic pathways, limiting factors and mathematical modeling are outlined. Also, the typical inorganic electron donor-mediated denitrification processes and their mechanism, the available microorganisms, process enhancing approaches and the engineering potentials, are compared and discussed. Finally, the prospects of developing the next generation inorganic electron donor-mediated denitrification process is put forward.

[Synergistic Control of Nitrogenous Disinfection By-products and Opportunistic Pathogens in Drinking Water by Iron-Modified Quartz Sand Filtration].

The main function of quartz sand in drinking water treatment has been to remove turbidity, while the microbial effect of its solid-liquid interface has been ignored. In order to solve the limitations of control of the disinfection by-products (DBPs) and opportunistic pathogens (OPs) in common quartz sand, the common quartz sand was modified to iron sand. The maximum DBPs formation potential of typical nitrogenous disinfection by-products (N-DBPs) and carbonaceous disinfection by-products was determined using gas chromatography-ECD. Compared with those of sand, the inhibition effects of halonitromethanes, haloacetamides, and haloacetonitriles by the Fe-sand were increased by 51.51%, 43.66%, and 90.6%, respectively. In addition, the gene copy numbers of Hartmanella vermiformis, Legionella spp., Mycobacterium spp., M. avium, and Naegleria spp. were detected via quantitative qPCR, and the results indicated that the Fe-sand did have a similar significant inhibitory effect on OPs. The Fe-sand had limited ability to enhance the removal of NOM. However, the Fe-sand effectively inhibited the continuous contribution of biofilm to N-DBPs and opportunistic pathogens. The distribution of biofilms on the surface of the Fe-sand filter media was uniform, not likely to fall off, and more stable; however, the suspended biofilms in the effluent were more difficult to aggregate. In addition, the α-helix of the secondary structure in the extracellular protein disappeared in the effluent of the Fe-sand. Therefore, the whole suspended biofilm was easily penetrated by chlorine. The Fe-sand solid-liquid interface did significantly change the microbial community structure and suspended biofilm characteristics, which provides a new concept to ensure the safety of drinking water quality and plays a good theoretical supporting role in the improvement and transformation of the existing process in drinking water treatment plants.

Contribution of extracellular polymeric substances and microbial community on the safety of drinking water quality: By mean of Cu/activated carbon biofiltration.

Change in water quality was investigated with laboratory-scale ozone-biological activated carbon filters using copper-modified granular activated carbon (Cu/GAC) and unmodified granular activated carbon (GAC). In the first seven days of the experimental period, Cu/GAC removed organic matter more efficiently owing to its enhanced adsorption capacity. As the running time increased, the amount of disinfection by-products (DBPs), dissolved organic carbon, and extracellular polymeric substances (EPS) increased sharply in the effluent of the Cu/GAC filter (CCW). More importantly, the EPS suspended in the CCW exhibited weaker flocculating efficiency and hydrophobicity, causing more active chemical reactions between chlorine and EPS substances. The copper species significantly limited the microbial biomass (0.01 nmol/L adenosine triphosphate) but stimulated the secretion of significant amounts of EPS by microorganisms for self-protection. Furthermore, the microbial community in the bulk water was successfully shaped by Cu/GAC, resulting in a continuous supply of EPS-derived DBP precursors and a sharp rise in chlorine consumption in the downstream drinking water distribution. Therefore, use of modified GAC materials, similar to Cu/GAC, as carrier materials for biological activated carbon (BAC) treatment remains controversial, despite enhanced pollutant adsorption capacity. This is the first study to reveal the mechanism of BAC-modified materials for water quality stability. The study potentially contributes to a comprehensive understanding of the effects of biofilm transformation and microbial community succession on drinking water quality. These results showed that tap water safety risks could be reduced by improving BAC pretreatment in drinking water treatment plants.

Effects of cast iron pipe corrosion on nitrogenous disinfection by-products formation in drinking water distribution systems via interaction among iron particles, biofilms, and chlorine.

The effects of cast iron pipe corrosion on nitrogenous disinfection by-products formation (N-DBPs) in drinking water distribution systems (DWDSs) were investigated. The results verified that in the effluent of corroded DWDSs simulated by annular reactors with corroded cast iron coupons, typical N-DBPs, including haloacetamides, halonitromethanes, and haloacetonitriles, increased significantly compared with the influent of DWDSs. In addition, more dissolved organic carbon, adenosine triphosphate, and iron particles were simultaneously detected in the bulk water of corroded DWDSs, thereby indicating that abundant iron particles acted as a "protective umbrella" for microorganisms. Under the condition of corroded DWDSs, the extracellular polymeric substances gradually exhibited distinct characteristics, including a higher content and lower flocculation efficiency, thereby resulting in a large supply of N-DBPs precursors. Corroded cast iron pipes, equivalent to a unique microbial interface, induced completely distinct microbial community structures and metabolic functions in DWDSs, thereby enhancing the formation of N-DBPs. This is the first study to successfully reveal the interactions among iron particles, biofilms, and chlorine in DWDSs, which may help to fully understand the biofilm transformation and microbial community succession in DWDSs.

Destruction of microbial stability in drinking water distribution systems by trace phosphorus polluted water source.

The effects of trace phosphate concentrations (0, 0.3 and 0.6 mg/L) in water source were investigated on microbial stability of the drinking water distribution systems (DWDSs). Obviously, the results verified that in the effluent of DWDSs simulated by annular reactors (ARs), the total microbial biomass and the absolute concentration of opportunistic pathogens such as Legionella pneumophila, Mycobacterium avium, and Hartmanella vermiformis increased significantly with phosphate concentration increasing. Based on X-ray powder diffractometer and zeta potentials measurement, trace phosphate did change physicochemical properties of corrosion products, hence promoting microbes escape from corrosion products to bulk water to a certain extent. Stimulated by chlorine disinfectant and phosphate, the extracellular polymeric substances (EPS) from the suspended biofilms of AR-0.6 gradually exhibited superior characteristics including higher content, flocculating efficiency, hydrophobicity and tightness degree, contributing to formation of large-scale suspended biofilms with strong chlorine-resistance ability. However, the disinfection by-products concentration in DWDSs barely changed due to the balance of EPS precursors contribution and biodegradation effect, covering up the microbiological water quality risk. Therefore, more attention should be paid to the trace phosphorus polluted water source though its concentration was much lower than wastewater. This is the first study successfully revealing the influence mechanism of trace phosphate on microbial stability in DWDSs, which may help to fully understand the biofilms transformation and microbial community succession in DWDSs.

Enhancing inhibition of disinfection byproducts formation and opportunistic pathogens growth during drinking water distribution by Fe2O3/Coconut shell activated carbon.

The effects of biological activated carbon treatment using Fe2O3 modified coconut shell-based activated carbon (Fe/CAC) were investigated on the occurrence of opportunistic pathogens (OPs) and formation of disinfection by-products (DBPs) in simulated drinking water distribution systems (DWDSs) with unmodified CAC as a reference. In the effluent of annular reactor (AR) with Fe/CAC, the OPs growth and DBPs formation were inhibited greatly. Based on the differential pulse voltammetry and dehydrogenase activity tests, it was verified that extracellular electron transfer was enhanced in the attached biofilms of Fe/CAC, hence improving the microbial metabolic activity and biological removal of organic matter especially DBPs precursors. Meanwhile, the extracellular polymeric substances (EPS) on the surface of Fe/CAC exhibited stronger viscosity, higher flocculating efficiency and better mechanical stability, avoiding bacteria or small-scale biofilms falling off into the water. Consequently, the microbial biomass and EPS substances amount decreased markedly in the effluent of Fe/CAC filter. More importantly, Fe/CAC did significantly enhance the shaping role on microbial community of downstream DWDSs, continuously excluding OPs advantage and inhibiting EPS production. The weakening of EPS in DWDSs resulted in decrease of microbial chlorine-resistance ability and EPS-derived DBPs precursors supply. Therefore, the deterioration of water quality in DWDSs was inhibited greatly, sustainably maintaining the safety of tap water. Our findings indicated that optimizing biological activated carbon treatment by interface modification is a promising method for improving water quality in DWDSs.

Efficient removal of disinfection by-products precursors and inhibition of bacterial detachment by strong interaction of EPS with coconut shell activated carbon in ozone/biofiltration.

The change of water quality was investigated in pilot-scale ozone-biological activated carbon (O3-BAC) filters using an emerging coconut shell-based granular activated carbon (CAC) or traditional granular activated carbon (GAC), respectively. More dissolved organic carbon (DOC) and disinfection by-products (DBPs) precursors were removed, meanwhile, less microbes, less metabolites and smaller microbial clusters were detected in the effluent of CAC compared with GAC. Sequentially, lower DBPs formation and higher disinfection efficiency were achieved in drinking water distribution systems (DWDSs). Furthermore, it was observed that extracellular electron transfer was enhanced in the attached biofilms of CAC, hence improving the microbial metabolic activity and biological removal of DOC. The results were attributed to the strong interaction of extracellular polymeric substances (EPS) with highly graphitized CAC. In addition, CAC resulted in totally different EPS in attached biofilms with superior characteristics including stronger viscosity, higher flocculating efficiency, mechanical stability and numerous binding sites for bacterial cells. Consequently, a wide range of compact interconnected biofilms formed on the surface of CAC and exhibited certain binding effect for microbial flocs and metabolites. Therefore, CAC resulted in higher microbial metabolic activity and lower release of microbes and metabolites, which was beneficial to maintain water quality safety in downstream DWDSs.

Fast Disassembly of Lignocellulosic Biomass to Lignin and Sugars by Molten Salt Hydrate at Low Temperature for Overall Biorefinery.

Lignocellulose is a complex of cellulose, hemicellulose, and lignin, whose overall conversion is still a challenge, especially by a fast and efficient method. Here, a very simple method has been developed using acidic molten salt of zinc chloride hydrate as the solvent and catalyst for complete disassembly of lignocellulose at 95 °C and atmospheric pressure in 12 min. The major products are lignin and monosaccharides, such as glucose and xylose. It was found that high-purity lignin in yield of about 20 wt % can be obtained with various biomass, and the maximum yield of glucose from bamboo is 40.56 wt % and that of xylose from wheat straw is 16.82 wt %. Importantly, zinc chloride can be recovered through precipitation by ammonia and reused for next cycles. It provides a simple route to separate and efficiently convert lignocellulose, especially high-grade feedstock for biorefinery.