RESUMEN
In recent years, the use of electroencephalography (EEG) has grown as a tool for diagnostic and brain function monitoring, being a simple and non-invasive method compared with other procedures like histological sampling. Typically, in order to extract functional brain responses from EEG signals, prolonged and repeated stimuli are needed because of the artifacts generated in recordings which adversely impact the stimulus-response analysis. To mitigate the artifact effect, correlation analysis (CA) methods are applied in the literature, where the predominant approaches focus on enhancing stimulus-response correlations through the use of linear analysis methods like canonical correlation analysis (CCA). This paper introduces a novel CA framework based on a neural network with a loss function specifically designed to maximize correlation between EEG and speech stimuli. Compared with other deep learning CA approaches (DCCAs) in the literature, this framework introduces a single multilayer perceptron (MLP) network instead of two networks for each stimulus. To validate the proposed approach, a comparison with linear CCA (LCCA) and DCCA was performed, using a dataset containing the EEG traces of subjects listening to speech stimuli. The experimental results show that the proposed method improves the overall Pearson correlation by 10.56% compared with the state-of-the-art DCCA method.
Asunto(s)
Aprendizaje Profundo , Habla , Humanos , Electroencefalografía/métodos , Encéfalo/fisiología , Redes Neurales de la Computación , Artefactos , AlgoritmosRESUMEN
Reliable point-of-care (POC) rapid tests are crucial to detect infection and contain the spread of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The emergence of several variants of concern (VOC) can reduce binding affinity to diagnostic antibodies, limiting the efficacy of the currently adopted tests, while showing unaltered or increased affinity for the host receptor, angiotensin converting enzyme 2 (ACE2). We present a graphene field-effect transistor (gFET) biosensor design, which exploits the Spike-ACE2 interaction, the crucial step for SARS-CoV-2 infection. Extensive computational analyses show that a chimeric ACE2-Fragment crystallizable (ACE2-Fc) construct mimics the native receptor dimeric conformation. ACE2-Fc functionalized gFET allows in vitro detection of the trimeric Spike protein, outperforming functionalization with a diagnostic antibody or with the soluble ACE2 portion, resulting in a sensitivity of 20 pg/mL. Our miniaturized POC biosensor successfully detects B.1.610 (pre-VOC), Alpha, Beta, Gamma, Delta, Omicron (i.e., BA.1, BA.2, BA.4, BA.5, BA.2.75 and BQ.1) variants in isolated viruses and patient's clinical nasopharyngeal swabs. The biosensor reached a Limit Of Detection (LOD) of 65 cps/mL in swab specimens of Omicron BA.5. Our approach paves the way for a new and reusable class of highly sensitive, rapid and variant-robust SARS-CoV-2 detection systems.
RESUMEN
The use of electroencephalography (EEG) has recently grown as a means to diagnose neurodegenerative pathologies such as Alzheimer's disease (AD). AD recognition can benefit from machine learning methods that, compared with traditional manual diagnosis methods, have higher reliability and improved recognition accuracy, being able to manage large amounts of data. Nevertheless, machine learning methods may exhibit lower accuracies when faced with incomplete, corrupted, or otherwise missing data, so it is important do develop robust pre-processing techniques do deal with incomplete data. The aim of this paper is to develop an automatic classification method that can still work well with EEG data affected by artifacts, as can arise during the collection with, e.g., a wireless system that can lose packets. We show that a recurrent neural network (RNN) can operate successfully even in the case of significantly corrupted data, when it is pre-filtered by the robust principal component analysis (RPCA) algorithm. RPCA was selected because of its stated ability to remove outliers from the signal. To demonstrate this idea, we first develop an RNN which operates on EEG data, properly processed through traditional PCA; then, we use corrupted data as input and process them with RPCA to filter outlier components, showing that even with data corruption causing up to 20% erasures, the RPCA was able to increase the detection accuracy by about 5% with respect to the baseline PCA.
Asunto(s)
Enfermedad de Alzheimer , Algoritmos , Enfermedad de Alzheimer/diagnóstico , Electroencefalografía/métodos , Humanos , Redes Neurales de la Computación , Reproducibilidad de los ResultadosRESUMEN
Electromyography (EMG) sensors produce a stream of data at rates that can easily saturate a low-energy wireless link such as Bluetooth Low Energy (BLE), especially if more than a few EMG channels are being transmitted simultaneously. Compressing data can thus be seen as a nice feature that could allow both longer battery life and more simultaneous channels at the same time. A lot of research has been done in lossy compression algorithms for EMG data, but being lossy, artifacts are inevitably introduced in the signal. Some artifacts can usually be tolerable for current applications. Nevertheless, for some research purposes and to enable future research on the collected data, that might need to exploit various and currently unforseen features that had been discarded by lossy algorithms, lossless compression of data may be very important, as it guarantees no extra artifacts are introduced on the digitized signal. The present paper aims at demonstrating the effectiveness of such approaches, investigating the performance of several algorithms and their implementation on a real EMG BLE wireless sensor node. It is demonstrated that the required bandwidth can be more than halved, even reduced to 1/4 on an average case, and if the complexity of the compressor is kept low, it also ensures significant power savings.
Asunto(s)
Compresión de Datos , Algoritmos , Artefactos , Electromiografía , Humanos , Fenómenos Físicos , Procesamiento de Señales Asistido por ComputadorRESUMEN
This paper deals with the electrochemical characterization and the equivalent circuit modeling of screen-printed electrodes, modified by an epoxy composite and loaded with carbon nanotubes (CNTs), pristine and functionalized NH2, and graphene nanoplates (GNPs). The fabrication method is optimized in order to obtain a good dispersion even at high concentration, up to 10%, to increase the range of investigation. Due to the rising presence of filler on the surface, the cyclic voltammetric analysis shows an increasing of (i) electrochemical response and (ii) filler concentration as observed by the scanning electron microscopy (SEM). Epoxy/CNTs-NH2 and epoxy/GNPs, at 10% of concentration, show the best electrochemical behavior. Furthermore, epoxy/CNTs-NH2 show a lower percolation threshold than epoxy/CNT, probably due to the direct bond created by amino groups. Furthermore, the electrochemical impedance spectroscopy (EIS) is used to obtain an electrical equivalent circuit (EEC). The EEC model is a remarkable evolution of previous circuits present in the literature, by inserting an accurate description of the capacitive/inductive/resistive characteristics, thus leading to an enhanced knowledge of phenomena that occur during electrochemical processes.
RESUMEN
We introduce a dataset to provide insights about the photoplethysmography (PPG) signal captured from the wrist in presence of motion artifacts and the accelerometer signal, simultaneously acquired from the same wrist. The data presented were collected by the electronics research team of the Department of Information Engineering, Polytechnic University of Marche, Ancona, Italy. This article describes data recorded from 7 subjects and includes 105 PPG signals (15 for each subject) and the corresponding 105 tri-axial accelerometer signals measured with a sampling frequency of 400 Hz. These data can be reused for testing machine learning algorithms for human activity recognition.
RESUMEN
We introduce a dataset to provide insights into the relationship between the diaphragm surface electromyographic (sEMG) signal and the respiratory air flow. The data presented had been originally collected for a research project jointly developed by the Department of Information Engineering and the Department of Industrial Enginering and Mathematical Sciences, Polytechnic University of Marche, Ancona, Italy. This article describes data recorded from 8 subjects, and includes 8 air flow and 8 surface electromyographic (sEMG) signals for diaphragmatic respiratory activity monitoring, measured with a sampling frequency of 2 kHz.
RESUMEN
BACKGROUND: The human activity monitoring technology is one of the most important technologies for ambient assisted living, surveillance-based security, sport and fitness activities, healthcare of elderly people. The activity monitoring is performed in two steps: the acquisition of body signals and the classification of activities being performed. This paper presents a low-cost wearable wireless system specifically designed to acquire surface electromyography (sEMG) and accelerometer signals for monitoring the human activity when performing sport and fitness activities, as well as in healthcare applications. RESULTS: The proposed system consists of several ultralight wireless sensing nodes that are able to acquire, process and efficiently transmit the motion-related (biological and accelerometer) body signals to one or more base stations through a 2.4 GHz radio link using an ad-hoc communication protocol designed on top of the IEEE 802.15.4 physical layer. A user interface software for viewing, recording, and analysing the data was implemented on a control personal computer that is connected through a USB link to the base stations. To demonstrate the capability of the system of detecting the user's activity, data recorded from a few subjects were used to train and test an automatic classifier for recognizing the type of exercise being performed. The system was tested on four different exercises performed by three people, the automatic classifier achieved an overall accuracy of 85.7% combining the features extracted from acceleration and sEMG signals. CONCLUSIONS: A low cost wireless system for the acquisition of sEMG and accelerometer signals has been presented for healthcare and fitness applications. The system consists of wearable sensing nodes that wirelessly transmit the biological and accelerometer signals to one or more base stations. The signals so acquired will be combined and processed in order to detect, monitor and recognize human activities.
Asunto(s)
Electromiografía/instrumentación , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , Aceleración , Acelerometría , Arritmias Cardíacas , Gráficos por Computador , Computadores , Electromiografía/métodos , Diseño de Equipo , Ejercicio Físico , Actividades Humanas , Humanos , Procesamiento de Señales Asistido por Computador , Programas Informáticos , Interfaz Usuario-Computador , Dispositivos Electrónicos Vestibles , Tecnología Inalámbrica/instrumentaciónRESUMEN
The human activity diarization using wearable technologies is one of the most important supporting techniques for ambient assisted living, sport and fitness activities, healthcare of elderly people. The activity diarization is performed in two steps: the acquisition of body signals and the classification of activities being performed. This paper presents a technique for data fusion at classifier level of accelerometer and sEMG signals acquired by using a low-cost wearable wireless system for monitoring the human activity when performing sport and fitness activities, as well as in healthcare applications. To demonstrate the capability of the system of diarizing the user's activities, data recorded from a few subjects were used to train and test the automatic classifier for recognizing the type of exercise being performed.
Asunto(s)
Acelerometría/métodos , Electromiografía/métodos , Ejercicio Físico/fisiología , Aptitud Física/fisiología , Humanos , Dispositivos Electrónicos VestiblesRESUMEN
This paper presents a technique for parametric model estimation of the motor unit action potential (MUAP) from the surface electromyography (sEMG) signal by using homomorphic deconvolution. The cepstrum-based deconvolution removes the effect of the stochastic impulse train, which originates the sEMG signal, from the power spectrum of sEMG signal itself. In this way, only information on MUAP shape and amplitude were maintained, and then, used to estimate the parameters of a time-domain model of the MUAP itself. In order to validate the effectiveness of this technique, sEMG signals recorded during several biceps curl exercises have been used for MUAP amplitude and time scale estimation. The parameters so extracted as functions of time were used to evaluate muscle fatigue showing a good agreement with previously published results.
Asunto(s)
Electromiografía/métodos , Músculo Esquelético/fisiología , Procesamiento de Señales Asistido por Computador , Adulto , Algoritmos , Humanos , Masculino , Persona de Mediana Edad , Fatiga Muscular/fisiología , Reproducibilidad de los ResultadosRESUMEN
Speaker identification plays a crucial role in biometric person identification as systems based on human speech are increasingly used for the recognition of people. Mel frequency cepstral coefficients (MFCCs) have been widely adopted for decades in speech processing to capture the speech-specific characteristics with a reduced dimensionality. However, although their ability to decorrelate the vocal source and the vocal tract filter make them suitable for speech recognition, they greatly mitigate the speaker variability, a specific characteristic that distinguishes different speakers. This paper presents a theoretical framework and an experimental evaluation showing that reducing the dimension of features by applying the discrete Karhunen-Loève transform (DKLT) to the log-spectrum of the speech signal guarantees better performance compared to conventional MFCC features. In particular with short sequences of speech frames, with typical duration of less than 2 s, the performance of truncated DKLT representation achieved for the identification of five speakers are always better than those achieved with the MFCCs for the experiments we performed. Additionally, the framework was tested on up to 100 TIMIT speakers with sequences of less than 3.5 s showing very good recognition capabilities.
RESUMEN
Sport, fitness, as well as rehabilitation activities, often require the accomplishment of repetitive movements. The correctness of the exercises is often related to the capability of maintaining the required cadence and muscular force. Failure to maintain the required force, also known as muscle fatigue, is accompanied by a shift in the spectral content of the surface electromyography (EMG) signal toward lower frequencies. This paper presents a novel approach for simultaneously obtaining exercise repetition frequency and evaluating muscular fatigue, as functions of time, by only using the EMG signal. The mean frequency of the amplitude spectrum (MFA) of the EMG signal, considered as a function of time, is directly related to the dynamics of the movement performed and to the fatigue of the involved muscles. If the movement is cyclic, MFA will display the same pattern and its average will tend to decrease. These two effects have been simultaneously modeled by a two-component AM-FM model based on the Hilbert transform. The method was tested on signals recorded using a wireless system applied to healthy subjects performing dumbbell biceps curls, dumbbell lateral rises, and bodyweight squats. Experimental results show the excellent performance of the proposed technique.
Asunto(s)
Electromiografía/métodos , Fatiga Muscular/fisiología , Procesamiento de Señales Asistido por Computador , Adulto , Humanos , Persona de Mediana Edad , Músculo Esquelético/fisiologíaRESUMEN
The learning capability of neural networks is equivalent to modeling physical events that occur in the real environment. Several early works have demonstrated that neural networks belonging to some classes are universal approximators of input-output deterministic functions. Recent works extend the ability of neural networks in approximating random functions using a class of networks named stochastic neural networks (SNN). In the language of system theory, the approximation of both deterministic and stochastic functions falls within the identification of nonlinear no-memory systems. However, all the results presented so far are restricted to the case of Gaussian stochastic processes (SPs) only, or to linear transformations that guarantee this property. This paper aims at investigating the ability of stochastic neural networks to approximate nonlinear input-output random transformations, thus widening the range of applicability of these networks to nonlinear systems with memory. In particular, this study shows that networks belonging to a class named non-Gaussian stochastic approximate identity neural networks (SAINNs) are capable of approximating the solutions of large classes of nonlinear random ordinary differential transformations. The effectiveness of this approach is demonstrated and discussed by some application examples.