Potential-induced electronic structure changes in supercapacitor electrodes observed by in operando soft X-ray spectroscopy.

The dynamic physiochemical response of a functioning graphene-based aerogel supercapacitor is monitored in operando by soft X-ray spectroscopy and interpreted through ab initio atomistic simulations. Unanticipated changes in the electronic structure of the electrode as a function of applied voltage bias indicate structural modifications across multiple length scales via independent pseudocapacitive and electric double layer charge storage channels.

Photothermal laser microsintering of nanoporous gold.

Photothermal processing of nanoporous gold using a microfocused continuous-wave laser at a wavelength of 532 nm and a 1/e(2) spot diameter of 2.9 µm has been studied. In addition, complementary experiments have been carried out via conventional annealing. Scanning electron microscopy has been used for characterization. Local laser irradiation at distinct laser powers and pulse lengths results in coarsening of the porous gold structures. During laser processing the pore size of the native nanoporous gold increases to maximum values in the range of 0.25-3 µm. The affected areas exhibit lateral dimensions in the range of 2-10 µm. Overall two regions are distinguished. An inner region, where large pores and ligaments are formed and an outer region, where the pore size and ligament size gradually change and approach the feature sizes of the native material. A qualitative thermokinetic model allows one to reproduce the experimentally observed dependence of the laser-induced morphologies on the laser parameters. On the basis of this model the underlying processes are attributed to sintering and melting of the gold structures. The presented results demonstrate the prospects of photothermal laser processing in engineering porous gold with spatially varying porosities on micrometer to nanometer length scales.

Nanoporous gold: a new gold catalyst with tunable properties.

Nanoporous gold (np-Au) represents a novel nanostructured bulk material with very interesting perspectives in heterogeneous catalysis. Its monolithic porous structure and the absence of a support or other stabilizing agents opens up unprecedented possibilities to tune structure and surface chemistry in order to adapt the material to specific catalytic applications. We investigated three of these tuning options in more detail: change of the porosity by annealing, increase of activity by the deposition of oxides and change of activity and selectivity by bimetallic effects. As an example for the latter case, the effect of Ag impurities will be discussed. The presence and concentration of Ag can be correlated to the availability of active oxygen. While for the oxidation of CO the activity of the catalyst can be significantly enhanced when increasing the content of Ag, we show for the oxidation of methanol that the selectivity is shifted from partial to total oxidation. In a second set of experiments, two different metal-oxides were deposited on np-Au, praseodymia and titania. In both cases, the surface chemistry changed significantly. The activity of the catalyst for oxidation of CO was increased by up to one order of magnitude after modification. Finally, we used adsorbate controlled coarsening to tune the structure of np-Au. In this way, even gradients in the pore- and ligament size could be induced, taking advantage of mass transport phenomena.

Nanoporous gold: a new material for catalytic and sensor applications.

Nanostructured materials are governed by their surface chemical properties. This is strikingly reflected by np-Au. This material can be generated by corrosion of bulk Ag-Au alloys. Based on a self-organisation process, a 3 dimensional sponge like gold structure evolves with ligaments in the range of only a few tens of nanometers. Due to its continuous porosity, the material can be penetrated by gases which then adsorb and interact with the surface. In this perspective we will review potential applications of np-Au resulting from this effect, namely heterogeneous gas phase catalysis, surface chemistry driven actuation, and adsorbate controlled stability of the nanostructure. We will summarize the current knowledge about the low temperature oxidation of CO as well as the highly selective oxidation of methanol. Furthermore, we will address the question how surface chemistry can influence the material properties itself. In particular, we will deal with (a) the actuation of np-Au by the reversible oxidation of its surface using ozone and (b) the adsorbate controlled coarsening of ligaments, using annealing experiments under ozone or inert gas atmosphere.

Electrocapillary maximum and potential of zero charge of carbon aerogel.

We present an electrochemical study of carbon aerogel (CA) in aqueous sodium fluoride solutions, focusing on the comparison of two quantities that are related to the potential of zero charge (pzc): the capacitance minimum and the 'electrocapillary maximum' of the surface forces. Capacitance minima are well resolved in our samples. Their potential emerges reproducibly as around 90 mV (vs. Ag/AgCl in KCl), similar to the value, 70 mV, of bulk glassy carbon which we use for comparison, and similar to previous reported pzc values for carbon materials. Significantly, no electrocapillary maximum is found in this potential range. This demonstrates that the pzc does not necessarily coincide with the potential of the maximum of surface stress. We also determined the area-specific capacitances, c(a) = 2.8 microF cm(-2), which agrees well with reports for the basal-plane of graphite single crystals. Our experiments yield large reversible strain amplitudes, up to 0.45%.

On the microstructure of nanoporous gold: an X-ray diffraction study.

The evolution of the grain structure, internal strain, and the lattice misorientations of nanoporous gold during dealloying of bulk (3D) Ag-Au alloy samples was studied by various in situ and ex situ X-ray diffraction techniques including powder and Laue diffraction. The experiments reveal that the dealloying process preserves the original crystallographic structure but leads to a small spread in orientations within individual grains. Initially, most grains develop in-plane tensile stresses, which are partly released during further dealloying. Simultaneously, the feature size of the developing nanoporous structure increases with increasing dealloying time. Finally, microdiffraction experiments on dealloyed micron-sized nanoporous pillars reveal significant surface damage introduced by focused ion beam milling.

Synthesis of TiO2 nanoparticles on the Au(111) surface.

The growth of titanium oxide nanoparticles on reconstructed Au(111) was investigated by scanning tunneling microscopy and x-ray photoelectron spectroscopy. Ti was deposited by physical-vapor deposition at 300 K. Regular arrays of titanium nanoparticles form by preferential nucleation of Ti at the elbow sites of the herringbone reconstruction. The titanium oxide nanoclusters were synthesized by subsequent exposure to O(2) at 300 K. Two-and three-dimensional titanium oxide nanocrystallites form during annealing in the temperature range from 600 to 900 K. At the same time, the Au(111) surface assumes a serrated 110-oriented step-edge morphology suggesting step-edge pinning by titanium oxide nanoparticles. The oxidation state of the titanium oxide nanoparticles varies with annealing temperature. Specifically, annealing to 900 K results in the formation of stoichiometric TiO(2) nanocrystals as judged by the Ti(2p) binding energies measured in the x-ray photoelectron data. The nanodispersed TiO(2) on Au(111) is an ideal system to test the various models proposed for the enhanced catalytic reactivity of supported Au nanoparticles.