RESUMEN
Transforming CO2 to CO via reverse water-gas shift (RWGS) reaction is widely regarded as a promising technique for improving the efficiency and economics of CO2 utilization processes. Moreover, it is also considered as a pathway towards e-fuels. Cu-oxide catalysts are widely explored for low-temperature RWGS reactions; nevertheless, they tend to deactivate significantly under applied reaction conditions due to the agglomeration of copper particles at elevated temperatures. Herein, we have synthesized homogeneously distributed Cu metallic nanoparticles supported on Mo2C for the RWGS reaction by a unique approach of in situ carburization of metal-organic frameworks (MOFs) using a Cu-based MOF i.e. HKUST-1 encapsulating molybdenum-based polyoxometalates. The newly derived Na-Cu-Mo2C nanocomposite catalyst system exhibits excellent catalytic performance with a CO production rate of 3230.0 mmol gcat-1 h-1 with 100% CO selectivity. Even after 250 h of a stability test, the catalyst remained active with more than 80% of its initial activity.
RESUMEN
Herein, we report the synthesis of two-dimensional chiral ZnII Salen covalent organic frameworks (COFs) (2) via rapid microwave-promoted condensation of C3-symmetric 1,3,5-tris[(5-tert-butyl-3-formyl-4-hydroxyphenyl)ethynyl]benzene 1 with (1R,2R)-1,2-diaminocyclohexane in excellent yields. The synthesized chiral ZnII Salen COF (2) showed a 454 m2 g-1 BET surface area with excellent crystallinity and thermal stability. Further, the post-synthetic metal exchange reaction was performed for chiral ZnII Salen COFs (2) with Mn(OAc)2·4H2O to synthesize chiral MnIII Salen COFs (3) and utilized as an effective heterogeneous catalyst for the enantioselective epoxidation of styrenes and chromenes to afford chiral epoxides up to 72% ee. Chiral MnIII Salen COF (3) could easily be separated by centrifugation and reused up to four recycles with an observable loss in activity without impairing enantioselectivity.
RESUMEN
Sustainable chemistry research prioritizes reducing atmospheric carbon dioxide, and one logical solution is to develop adsorbents suitable for carbon capture and utilization. In this work, a new family of three-dimensional (3D) flower-like Mn-promoted MgO was synthesized by the coprecipitation method and used as an adsorbent for CO2 capture and a catalyst for CO2 utilization. The scanning electron microscopy (SEM) analysis of the samples shows a 3D architecture composed of thin nanosheets. The X-ray diffraction (XRD) analysis confirms the presence of the MgO with a cubic structure, while X-ray photoelectron spectroscopy (XPS) reveals the existence of Mn particles as a combination of Mn3+ and Mn4+ ions on MgO. N2 adsorption-desorption experiments highlight the beneficial contribution of Mn particles to surface area enhancement and reveal the existence of mesopores. Furthermore, the designed 3D Mn-doped MgO as an adsorbent demonstrates its capability to improve the ability of MgO to adsorb CO2 (from 0.28 mmol/g for pure MgO to 0.74 mmol/g) in ambient conditions and it is regenerable up to 9 cycles with a slight variation after the third cycle. Moreover, Mn-doped MgO shows good catalyst activity for the oxidation of ethylbenzene derivatives to carbonyl compounds in the presence of CO2 and O2. Mn-15/MgO shows excellent catalytic behavior with a conversion of 97.4 and 100% selectivity. Also, it is regenerable with an insignificant decrease in conversion (â¼11.63%) after seven cycles, while the selectivity of acetophenone remains stable. The analyses of the recycled sample suggest that the chemical compositions of Mn and Mg influence the catalytic activity of those Mn-promoted MgO materials. The role of CO2 gas in the aerobic oxidation of ethylbenzene to acetophenone has also been proved. Finally, the control experiments and EPR studies reveal that the reaction takes place through the formation of radicals.
RESUMEN
In this work, we have reported a noble metal free heterogeneous photocatalyst to carry out direct (het)arene C-H arylation and solvent-free CO2 capture via single-electron transfer processes at room temperature and under pressure. The catalytic system comprises a cobalt(III) complex grafted over the silica coated magnetic support for the efficient recovery of the photocatalytic moiety without hampering its light-harvesting capability. The novel Earth-abundant cobalt(III) based photocatalyst possesses various fascinating properties such as high surface area to volume ratios, large pore volume, crystalline behaviour, high metal loading, excellent stability and reusability. The general efficacy of the highly abundant and low-cost cobalt based heterogeneous nanocatalyst was checked for the selective conversion of aryldiazonium salts into synthetically and pharmaceutically significant biaryl motifs under ambient conditions upon irradiation with visible light. The highly efficient photocatalytic conversion of carbon dioxide (CO2) to a value-added chemical was accomplished under mild reaction conditions with high selectivity, showing the added benefit of operational simplicity.
RESUMEN
In this study, a facile method for the synthesis of leach proof and earth-abundant non-noble Ni nanoparticles on N-doped carbon nanotubes is reported. The catalyst was synthesized by an impregnation-carbonization method, wherein a Ni-chitosan complex upon carbonization in a 5% H2/N2 atmosphere at 800 °C yielded Ni-containing N-doped CNTs. Chitosan served as a single source of carbon and nitrogen, and the nanotube growth was facilitated by the in situ formed Ni nanoparticles. The nanocatalyst was thoroughly characterized by several techniques; elemental mapping by SEM and TEM analysis confirmed the uniform distribution of Ni nanoparticles on the surface of N-doped CNTs with an average size in the range of 10-15 nm. The catalyst efficiently reduced a variety of nitroarenes (>99%) into their corresponding amines at a moderate pressure (5 bar) and a comparatively lower temperature (80 °C). Furthermore, the easy recovery of the catalyst using an external magnetic field along with high activity and easy recyclability makes the protocol eco-friendly.
Asunto(s)
Aminas/síntesis química , Quitosano/química , Complejos de Coordinación/química , Nanopartículas del Metal/química , Nanotubos de Carbono/química , Nitrobencenos/química , Aminas/química , Complejos de Coordinación/síntesis química , Hidrógeno/química , Hidrogenación , Estructura Molecular , Níquel/química , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
The gram-scale synthesis of important flavoring ketones via alkylation of acetoacetic ester on substituted benzylic carbon followed by decarboxylation using a heterogeneous, commercial, solid acid catalyst is reported. The flavoring ketones were synthesized by the alkylation of acetoacetic ester, which proceeds through an SN1-type reaction to generate an alkylated (ß-ketoester) intermediate at the benzylic carbon, which is decarboxylated under the acidic condition. Among the solid acid catalysts used, Amberlyst-15 was found to be the best catalyst under the solvent-free condition. This protocol was successfully employed for the synthesis of various flavoring ketones such as raspberry ketone and ginger ketone with almost complete conversion and 82% isolated yield. The para-donating groups on the benzylic alcohol showed a high rate of reaction. The catalyst was easily recovered and reused 6 times without losing its activity and selectivity. Moreover, this reaction was demonstrated at a 10 g scale, which implicated the potential applicability of the protocol in the industry.
RESUMEN
Herein, we report a simple route for the synthesis of phosphonate functionalized Brønsted solid acid carbon spheres as heterogeneous catalyst for the valorization of bio-derived α-pinene oxide. The Brønsted acidity was generated via two steps; hydrothermal carbonization of sugar to produce carbon microspheres followed by PCl3 treatment to form phosphonate functionalized carbon. The presence of phosphonate was confirmed by CP-MAS 31P and 13C NMR. In addition, the presence of the P-C, O-P-C and HO-P[double bond, length as m-dash]O bonds of the phosphonate group was confirmed by FT-IR, 31P NMR, and XPS. SEM-EDAX analysis revealed the presence of a phosphorus content of â¼1.71 wt% on the surface of the catalyst while elemental mapping showed a uniform dispersion of phosphorus over the carbon spheres. The as-synthesized Brønsted solid acid catalyst was used for the isomerization of α-pinene oxide which gave 100% conversion with 67% trans-carveol selectivity in highly polar basic solvent in 1 h reaction time. Also, the catalyst showed good recyclable activity even after five cycles.
Asunto(s)
Monoterpenos Bicíclicos/química , Carbono/química , Monoterpenos Ciclohexánicos/síntesis química , Organofosfonatos/química , Catálisis , Monoterpenos Ciclohexánicos/química , Microesferas , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Global warming challenges are fueling the demand to develop an efficient catalytic system for the reduction of CO2 , which would contribute significantly to the control of climate change. Herein, as-synthesized bismuthoxide-decorated graphene oxide (Bi2 O3 @GO) was used as an electro/thermal catalyst for CO2 reduction. Bi2 O3 @GO is found to be distributed uniformly, as confirmed by scanning electron and transmission electron microscopic analysis. The X-ray diffraction (XRD) pattern shows that the Bi2 O3 has a ß-phase with 23.4â m2 g-1 BET surface area. Significantly, the D and G bands from Raman spectroscopic analysis and their intensity ratio (ID /IG ) reveal the increment in defective sites on GO after surface decoration. X-ray photoelectron spectroscopic (XPS) analysis shows clear signals for Bi, C, and O, along with their oxidation states. An ultra-low onset potential (-0.534â V vs. RHE) for the reduction of CO2 on Bi2 O3 @GO is achieved. Furthermore, potential-dependent (-0.534, -0.734, and -0.934 vs. RHE) bulk electrolysis of CO2 to formate provides Faradaic efficiencies (FE) of approximately 39.72, 61.48, and 83.00 %, respectively. Additionally, in time-dependent electrolysis at a potential of -0.934 versus RHE for 3 and 5â h, the observed FEs are around 84.20 % and 87.17 % respectively. This catalyst is also used for the thermal reduction of CO2 to formate. It is shown that the thermal reduction provides a path for industrial applications, as this catalyst converts a large amount of CO2 to formate (10â mm).
RESUMEN
Development of novel and greener methods for the selective oxidation of various organic compounds is a challenging task. Herein, a novel protocol for the selective oxidation of aromatic amines to nitroaromatics at room temperature is developed. The oxidation reaction was carried out using a mixture of formic acid and aqueous hydrogen peroxide, which resulted in the in situ formation of performic acid. Further, improvement of selectivity was studied using different surfactants, of which cetyltrimethylammonium bromide (CTAB) gave the highest selectivity (85%) toward nitrobenzene. The role of CTAB in achieving higher selectivity is discussed. Under optimized reaction conditions, various substituted amines were successfully oxidized to corresponding nitro compounds. It is worth mentioning that this is the first report on oxidation of amines to nitro compounds in an aqueous medium with high selectivity.
RESUMEN
One of the most vital supports to sustain human life on the planet earth is the agriculture system that has been constantly challenged in terms of yield. Crop losses due to insect pest attack even after excessive use of chemical pesticides, are major concerns for humanity and environment protection. By the virtue of unique properties possessed by micro and nano-structures, their implementation in Agri-biotechnology is largely anticipated. Hence, traditional pest management strategies are now forestalling the potential of micro and nanotechnology as an effective and viable approach to alleviate problems pertaining to pest control. These technological innovations hold promise to contribute enhanced productivity by providing novel agrochemical agents and delivery systems. Application of these systems engages to achieve: i) control release of agrochemicals, ii) site-targeted delivery of active ingredients to manage specific pests, iii) reduced pesticide use, iv) detection of chemical residues, v) pesticide degradation, vi) nucleic acid delivery and vii) to mitigate post-harvest damage. Applications of micro and nano-technology are still marginal owing to the perception of low economic returns, stringent regulatory issues involving safety assessment and public awareness over their uses. In this review, we highlight the potential application of micro and nano-materials with a major focus on effective pest management strategies including safe handling of pesticides.
Asunto(s)
Agricultura , Control de Plagas/tendencias , Plaguicidas/química , Animales , Composición de Medicamentos , Humanos , Insectos , NanotecnologíaRESUMEN
Core-shell nanoparticles (CSNs) are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors. By rationally tuning the cores as well as the shells of such materials, a range of core-shell nanoparticles can be produced with tailorable properties that can play important roles in various catalytic processes and offer sustainable solutions to current energy problems. Various synthetic methods for preparing different classes of CSNs, including the Stöber method, solvothermal method, one-pot synthetic method involving surfactants, etc., are briefly mentioned here. The roles of various classes of CSNs are exemplified for both catalytic and electrocatalytic applications, including oxidation, reduction, coupling reactions, etc.
RESUMEN
Recombinant expression of Capsicum annuum proteinase inhibitors (CanPI-13) and its application via synthetic carrier for the crop protection is the prime objective of our study. Herein, we explored proteinase inhibitor peptide immobilization on silica based nanospheres and rods followed by its pH mediated release in vitro and in vivo. Initial studies suggested silica nanospheres to be a suitable candidate for peptide immobilization. Furthermore, the interactions were characterized biophysically to ascertain their conformational stability and biological activity. Interestingly, bioactive peptide loading at acidic pH on nanospheres was found to be 62% and showed 56% of peptide release at pH 10, simulating gut milieu of the target pest Helicoverpa armigera. Additionally, in vivo study demonstrated significant reduction in insect body mass (158 mg) as compared to the control insects (265 mg) on 8th day after feeding with CanPI-13 based silica nanospheres. The study confirms that peptide immobilized silica nanosphere is capable of affecting overall growth and development of the feeding insects, which is known to hamper fecundity and fertility of the insects. Our study illustrates the utility and development of peptide-nanocarrier based platform in delivering diverse biologically active complexes specific to gut pH of H. armigera.
Asunto(s)
Sistemas de Liberación de Medicamentos/métodos , Glicoproteínas/administración & dosificación , Nanosferas/química , Proteínas de Plantas/administración & dosificación , Dióxido de Silicio/química , Secuencia de Aminoácidos , Animales , Fenómenos Biofísicos , Sistema Digestivo/metabolismo , Glicoproteínas/química , Glicoproteínas/metabolismo , Concentración de Iones de Hidrógeno , Proteínas Inmovilizadas/administración & dosificación , Proteínas Inmovilizadas/química , Proteínas Inmovilizadas/metabolismo , Cinética , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Datos de Secuencia Molecular , Mariposas Nocturnas/metabolismo , Nanosferas/ultraestructura , Proteínas de Plantas/química , Proteínas de Plantas/metabolismo , Homología de Secuencia de AminoácidoRESUMEN
We report the synthesis of a trifunctional catalyst containing amine, sulphonic acid and Pd nanoparticle catalytic groups anchored on the pore walls of SBA-15. The catalyst efficiently catalyzes one-pot three-step cascade reactions comprising deacetylation, Henry reaction and hydrogenation, giving up to â¼100% conversion and 92% selectivity to the final product.
Asunto(s)
Aminas/química , Nanopartículas del Metal/química , Paladio/química , Dióxido de Silicio/química , Ácidos Sulfónicos/química , Catálisis , Hidrogenación , Nanopartículas del Metal/ultraestructura , Microscopía Electrónica de Transmisión , PorosidadRESUMEN
We report calcium phosphate (CaP) nanocapsule crowned multiwalled carbon nanotubes (CNT-GSH-G4-CaP) as a novel platform for intracellular delivery of an anticancer drug. As a proof-of-concept, CNT-GSH-G4-CaP demonstrates release of anticancer drug doxorubicin hydrochloride (DOX) within intracellular lysosomes from the interior cavity of CNT upon pH triggered CaP dissolution. Importantly, we found that the CNT with a CaP nanolid can efficiently prevent untimely drug release at physiological pH but promotes DOX release at increased acidic milieu as observed in subcellular compartments such as lysosomes (â¼5.0). This "zero premature release" characteristic is of clinical significance in delivering cytotoxic drugs, by reducing systemic toxicity and thus beneficial for the effective anticancer treatment. We envision that this pH triggered CaP crowned CNT nanosystem would lead to a new generation of self-regulated platforms for intracellular delivery of a variety of anticancer drugs.
RESUMEN
In vivo and in vitro systems were employed to investigate the biocompatibility of two forms of calcined mesoporous silica microparticles, MCM41-cal and SBA15-cal, with ventricular myocytes. These particles have potential clinical use in delivering bioactive compounds to the heart. Ventricular myocytes were isolated from 6 to 8 week male Wistar rats. The distribution of the particles in ventricular myocytes was investigated by transmission electron microscopy and scanning electron microscopy. The distribution of particles was also examined in cardiac muscle 10 min after intravenous injection of 2.0 mg/mL MCM41-cal. Myocyte shortening and the Ca(2+) transient were determined following exposure to 200 µg/mL MCM41-cal or SBA15-cal for 10 min. Within 10 min of incubation at 25 °C, both MCM41-cal and SBA15-cal were found attached to the plasma membrane, and some particles were observed inside ventricular myocytes. MCM41-cal was more abundant inside the myocytes than SBA15-cal. The particles had a notable affinity to mitochondrial membranes, where they eventually settled. Within 10 min of intravenous injection (2.0 mg/mL), MCM41-cal traversed the perivascular space, and some particles entered ventricular myocytes and localized around the mitochondrial membranes. The amplitude of shortening was slightly reduced in myocytes superperfused with MCM41-cal or SBA15-cal. The amplitude of the Ca(2+) transient was significantly reduced in myocytes superperfused with MCM41-cal but was only slightly reduced with SBA15-cal. Overall, the results show reasonable bioavailability and biocompatibility of MCM41-cal and SBA15-cal with ventricular myocytes.
Asunto(s)
Calcio/metabolismo , Ventrículos Cardíacos/citología , Miocitos Cardíacos/fisiología , Nanopartículas/química , Dióxido de Silicio/química , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/metabolismo , Materiales Biocompatibles/toxicidad , Calcio/química , Supervivencia Celular/efectos de los fármacos , Estimulación Eléctrica , Colorantes Fluorescentes/química , Colorantes Fluorescentes/metabolismo , Masculino , Miocitos Cardíacos/citología , Miocitos Cardíacos/efectos de los fármacos , Nanopartículas/toxicidad , Nanopartículas/ultraestructura , Porosidad , Ratas , Ratas Wistar , Dióxido de Silicio/metabolismo , Dióxido de Silicio/toxicidadRESUMEN
BACKGROUND: The biocompatibility of two forms of calcined mesoporous silica particles, labeled as MCM41-cal and SBA15-cal, with fetal blood mononuclear cells was assessed in vitro. METHODS AND RESULTS: Fetal mononuclear cells were isolated from umbilical cord blood and exposed to 0.5 mg/mL of MCM41-cal or SBA15-cal for several hours. Transmission electron micrographs confirmed the presence of particles in the cytosol of macrophages, neutrophils, and lymphocytes without noticeable damage to the cellular organelles. The particles (especially MCM41-cal) were in close proximity to plasma, and nuclear and mitochondrial membranes. Biocompatibility was assessed by a functional assay that measured cellular respiration, ie, mitochondrial O(2) consumption. The rate of respiration (k(c), in µM O(2) per minute per 10(7) cells) for untreated cells was 0.42 ± 0.16 (n = 10), for cells treated with MCM41-cal was 0.39 ± 0.22 (n = 5, P > 0.966) and for cells treated with SBA15-cal was 0.44 ± 0.13 (n = 5, P > 0.981). CONCLUSION: The results show reasonable biocompatibility of MCM41-cal and SBA15-cal in fetal blood mononuclear cells. Future studies are needed to determine the potential of collecting fetal cells from a fetus or neonate, loading the cells in vitro with therapeutic MCM41-cal or SBA15-cal, and reinfusing them into the fetus or neonate.
Asunto(s)
Respiración de la Célula/efectos de los fármacos , Sangre Fetal/efectos de los fármacos , Nanopartículas/química , Dióxido de Silicio/farmacología , Sangre Fetal/citología , Humanos , Leucocitos Mononucleares/efectos de los fármacos , Leucocitos Mononucleares/metabolismo , Macrófagos/efectos de los fármacos , Macrófagos/metabolismo , Macrófagos/patología , Ensayo de Materiales , Oxígeno/metabolismo , PorosidadRESUMEN
Current interest in natural photosynthesis as a blueprint for solar energy conversion has led to the development of a biohybrid photovoltaic cell in which bacterial photosynthetic membrane vesicles (chromatophores) have been adsorbed to a gold electrode surface in conjunction with biological electrolytes (quinone [Q] and cytochrome c; Magis et al. [2010] Biochim. Biophys. Acta 1798, 637-645). Since light-driven current generation was dependent on an open circuit potential, we have tested whether this external potential could be replaced in an appropriately designed dye-sensitized solar cell (DSSC). Herein, we show that a DSSC system in which the organic light-harvesting dye is replaced by robust chromatophores from Rhodospirillum rubrum, together with Q and cytochrome c as electrolytes, provides band energies between consecutive interfaces that facilitate a unidirectional flow of electrons. Solar I-V testing revealed a relatively high I(sc) (short-circuit current) of 25 µA cm(-2) and the cell was capable of generating a current utilizing abundant near-IR photons (maximum at ca 880 nm) with greater than eight-fold higher energy conversion efficiency than white light. These studies represent a powerful demonstration of the photoexcitation properties of a biological system in a closed solid-state device and its successful implementation in a functioning solar cell.
Asunto(s)
Cromatóforos Bacterianos/química , Luz , Fotosíntesis/fisiología , Rhodospirillum rubrum/citología , Energía Solar , Técnicas Bacteriológicas , Membrana Celular , Microscopía Electrónica de Rastreo , Procesos Fotoquímicos , TitanioRESUMEN
A new layered MOF material [Co(Hoba)(2)·2H(2)O] (1) (H(2)oba = 4,4'-oxybis(benzoic acid)) has been synthesized and used as a highly recyclable heterogeneous catalyst for olefin epoxidation reactions. Both high conversion (96%) and high selectivity of epoxide products (96%) are achieved.
RESUMEN
We report the synthesis and catalytic activities of highly stable, hollow nanoreactors, called SiO(2)/Pd/h-ZrO(2), which consist of silica microsphere (SiO(2))-supported Pd nanoparticle multicores (Pd) that are encapsulated with a hollow and nanoporous ZrO(2) shell (h-ZrO(2)). The SiO(2)/Pd/h-ZrO(2) nanoreactors are fabricated by first synthesizing SiO(2)/Pd/SiO(2)/ZrO(2) microspheres, and then etching the inner SiO(2) shell with dilute NaOH solution. The hollow and nanoporous ZrO(2) shell of the nanoreactors serves two important functions: 1) it provides reactants direct access to the Pd nanoparticle multicores inside the SiO(2)/Pd/h-ZrO(2) nanoreactors during catalysis, and 2) it stabilizes the Pd nanoparticles or protects them from aggregation/sintering. The fabrication of such structures capable of protecting the Pd nanoparticles from aggregation/sintering is of particular interest considering the fact that Pd nanoparticles generally have a high tendency to aggregate because of their high surface energies. Furthermore, the structures are interesting because the Pd nanoparticles are designed and synthesized here to have 'naked' surfaces or no organic surface-passivating ligands-that are often necessary to stabilize metallic nanoparticles-in order to increase their catalytic efficiency. The resulting SiO(2)/Pd/h-ZrO(2) nanoreactors show excellent catalytic activity, as shown in the hydrogenation of olefins and nitro groups, even at room temperature under moderate hydrogen pressure. This stems from the SiO(2)/Pd/h-ZrO(2) microspheres' high surface area and their small, stable, and bare Pd nanoparticles. Furthermore, the SiO(2)/Pd/h-ZrO(2) nanoreactor catalysts remain fairly stable after reaction and can be recycled multiple times without losing their high catalytic activities.
Asunto(s)
Nanopartículas del Metal/química , Nanotecnología/métodos , Paladio/química , Circonio/química , Catálisis , Microesferas , Porosidad , Dióxido de Silicio/químicaRESUMEN
We report the synthesis, characterization, and catalytic properties of novel monodisperse SiO(2)@Pd-PAMAM core-shell microspheres containing SiO(2) microsphere cores and PAMAM dendrimer-encapsulated Pd nanoparticle (Pd-PAMAM) shells. First, SiO(2) microspheres, which were prepared by the Stöber method, were functionalized with vinyl groups by grafting their surfaces with vinyltriethoxysilane (VTS). The vinyl groups were then converted into epoxides by using m-chloroperoxybenzoic acid. Upon treatment with amine-terminated G4 poly(amidoamine) (PAMAM) dendrimers, the SiO(2)-supported epoxides underwent ring-opening and gave SiO(2)@PAMAM core-shell microspheres. Pd nanoparticles within the cores of the SiO(2)-supported PAMAM dendrimers were synthesized by letting Pd(II) ions complex with the amine groups in the cores of the dendrimers and then reducing them into Pd(0) with NaBH(4). This produced the SiO(2)@Pd-PAMAM core-shell microspheres. The presence of the different functional groups on the materials was monitored by following the changes in FTIR spectra, elemental analyses, and weight losses on thermogravimetric traces. Transmission electron microscopy (TEM) images showed the presence of Pd nanoparticles with average size of 1.56 ± 0.67 nm on the surface of the monodisperse SiO(2)@Pd-PAMAM core-shell microspheres. The SiO(2)@Pd-PAMAM core-shell microspheres were successfully used as an easily recyclable catalyst for hydrogenation of various olefins, alkynes, keto, and nitro groups, giving ~100% conversion and high turnover numbers (TONs) under 10 bar H(2) pressure, at room temperature and in times ranging from 10 min to 3 h. In addition, the SiO(2)@Pd-PAMAM core-shell microspheres were proven to be recyclable catalysts up to five times with barely any leaching of palladium into the reaction mixture.