Environment-Driven Variability in Absolute Band Edge Positions and Work Functions of Reduced Ceria.

The absolute band edge positions and work function (Φ) are the key electronic properties of metal oxides that determine their performance in electronic devices and photocatalysis. However, experimental measurements of these properties often show notable variations, and the mechanisms underlying these discrepancies remain inadequately understood. In this work, we focus on ceria (CeO2), a material renowned for its outstanding oxygen storage capacity, and combine theoretical and experimental techniques to demonstrate environmental modifications of its ionization potential (IP) and Φ. Under O-deficient conditions, reduced ceria exhibits a decreased IP and Φ with significant sensitivity to defect distributions. In contrast, the IP and Φ are elevated in O-rich conditions due to the formation of surface peroxide species. Surface adsorbates and impurities can further augment these variabilities under realistic conditions. We rationalize the shifts in energy levels by separating the individual contributions from bulk and surface factors, using hybrid quantum mechanical/molecular mechanical (QM/MM) embedded-cluster and periodic density functional theory (DFT) calculations supported by interatomic-potential-based electrostatic analyses. Our results highlight the critical role of on-site electrostatic potentials in determining the absolute energy levels in metal oxides, implying a dynamic evolution of band edges under catalytic conditions.

Visible-Light-Active Iodide-Doped BiOBr Coatings for Sustainable Infrastructure.

The search for efficient materials for sustainable infrastructure is an urgent challenge toward potential negative emission technologies and the global environmental crisis. Pleasant, efficient sunlight-activated coatings for applications in self-cleaning windows are sought in the glass industry, particularly those produced from scalable technologies. The current work presents visible-light-active iodide-doped BiOBr thin films fabricated using aerosol-assisted chemical vapor deposition. The impact of dopant concentration on the structural, morphological, and optical properties was studied systematically. The photocatalytic properties of the parent materials and as-deposited doped films were evaluated using the smart ink test. An optimized material was identified as containing 2.7 atom % iodide dopant. Insight into the photocatalytic behavior of these coatings was gathered from photoluminescence and photoelectrochemical studies. The optimum photocatalytic performance could be explained from a balance between photon absorption, charge generation, carrier separation, and charge transport properties under 450 nm irradiation. This optimized iodide-doped BiOBr coating is an excellent candidate for the photodegradation of volatile organic pollutants, with potential applications in self-cleaning windows and other surfaces.

Molecular dopant determines the structure of a physisorbed self-assembled molecular network.

A small percentage of an impurity was shown, via scanning tunneling microscopy, to drastically change the on-surface self-assembly behavior of an aromatic tetracarboxylic acid, by initiating the nucleation and growth of a different polymorph. Molecular modelling simulations were used to shed further light onto the dopant-controlled assembly behaviour.

Probing the chemical structure of monolayer covalent-organic frameworks grown via Schiff-base condensation reactions.

Two-dimensional covalent-organic frameworks (2D-COFs) on surfaces offer a facile route to new 2D materials. Schiff-base condensation reactions have proven to be an effective fabrication route for such materials. We present scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) studies of porphyrin 2D-COFs grown at a solid-vapour interface. XPS shows that covalent links between porphyrins consist of a mixture of imines and hemiaminals, a non-conjugated intermediate in the Schiff-base condensation reaction. These results demonstrate that environmental conditions during growth can have an important impact on the chemical composition of Schiff-base 2D-COFs.

Thymine functionalised porphyrins, synthesis and heteromolecular surface-based self-assembly.

The synthesis and surface-based self-assembly of thymine-functionalised porphyrins is described. Reaction of 1-formylphenyl-3-benzoyl-thymine with suitable pyrollic species leads to the formation of tetra-(phenylthymine)porphyrin (tetra-TP) or mono-thymine-tri-(3,5-di-tert-butylphenyl)porphyrin (mono-TP). Single crystal X-ray diffraction studies demonstrate the self-association of mono-TP in the solid state through thymine···thymine hydrogen-bonding interactions but in solution this interaction (Kd = 6.1 ± 3.0 M-1) is relatively weak in comparison to the heteromolecular interaction between mono-TP and 9-propyladenine (K = 91.8 ± 20.5 M-1). STM studies of the tetratopic hydrogen-bonding tecton, tetra-TP, deposited on an HOPG substrate reveal the formation of an almost perfectly square self-assembled lattice through thymine···thymine hydrogen-bonding. Co-deposition of tetra-TP with 9-propyladenine leads to the adoption of preferable thymine···adenine interactions leading to the formation of a heteromolecular tetra-TP···9-propyladenine hydrogen bonded array including both Watson-Crick thymine···adenine interactions and adenine···adenine hydrogen-bonding. The studies demonstrate a pathway for the self-assembly of tetratopic hydrogen-bonding tectons and the use of preferential heteromolecular thymine···adenine interactions for the disruption of the homomolecular tetra-TP array. Studies of the self-assembly of tetra-TP and 9-propyladenine demonstrate a strong dependence on overall concentration and molar ratio of components indicating the importance of kinetic effects in surface self-assembly processes.

Temperature-induced structural phase transitions in a two-dimensional self-assembled network.

Two-dimensional (2D) supramolecular self-assembly at liquid-solid interfaces is a thermodynamically complex process producing a variety of structures. The formation of multiple network morphologies from the same molecular building blocks is a common occurrence. We use scanning tunnelling microscopy (STM) to investigate a structural phase transition between a densely packed and a porous phase of an alkylated dehydrobenzo[12]annulene (DBA) derivative physisorbed at a solvent-graphite interface. The influence of temperature and concentration are studied and the results combined using a thermodynamic model to measure enthalpy and entropy changes associated with the transition. These experimental results are compared to corresponding values obtained from simulations and theoretical calculations. This comparison highlights the importance of considering the solvent when modeling porous self-assembled networks. The results also demonstrate the power of using structural phase transitions to study the thermodynamics of these systems and will have implications for the development of predictive models for 2D self-assembly.

Role of substrate in directing the self-assembly of multicomponent supramolecular networks at the liquid-solid interface.

The self-assembly of multicomponent networks at the liquid-solid interface between Au(111) or highly oriented pyrolytic graphite (HOPG) and organic solvents was investigated using scanning tunneling microscopy. Alkoxylated dehydrobenzo[12]annulene (DBA) derivatives form hexagonal nanoporous networks, which trap either single molecules of coronene (COR) or small clusters of COR and isophthalic acid to form multicomponent networks. The pattern of interdigitation between alkyl chains from DBA molecules produces hexagonal pores that are either chiral or achiral. On Au(111) substrates multicomponent networks display an ordered superlattice arrangement of chiral and achiral pores. In comparison, similar networks on HOPG display only chiral pores. The unique superlattice structure observed on Au(111) is related to a lower energetic preference for chiral pores than on HOPG and increased diffusion barriers for guest molecules. The increased diffusion barriers for guests allow them to act as nucleation sites for the formation of achiral pores. Following the initial nucleation of an achiral pore, restrictions imposed by the accommodation of guests within the porous network mean that subsequent growth naturally leads to the formation of the superlattice structure.

One building block, two different nanoporous self-assembled monolayers: a combined STM and Monte Carlo study.

With the use of a single building block, two nanoporous patterns with nearly equal packing density can be formed upon self-assembly at a liquid-solid interface. Moreover, the formation of both of these porous networks can be selectively and homogenously induced by changing external parameters like solvent, concentration, and temperature. Finally, their porous properties are exploited to host up to three different guest molecules in a spatially resolved way.

Control and induction of surface-confined homochiral porous molecular networks.

Homochirality is essential to many biological systems, and plays a pivotal role in various technological applications. The generation of homochirality and an understanding of its mechanism from the single-molecule to supramolecular level have received much attention. Two-dimensional chirality is a subject of intense interest due to the unique possibilities and consequences of confining molecular self-assembly to surfaces or interfaces. Here, we report the perfect generation of two-dimensional homochirality of porous molecular networks at the liquid-solid interface in two different ways: (i) by self-assembly of homochiral building blocks and (ii) by self-assembly of achiral building blocks in the presence of a chiral modifier via a hierarchical structural recognition process, as revealed by scanning tunnelling microscopy. The present results provide important impetus for the development of two-dimensional crystal engineering and may afford opportunities for the utilization of chiral nanowells in chiral recognition processes, as nanoreactors and as data storage systems.

Dimerization of tri(4-bromophenyl)benzene by aryl-aryl coupling from solution on a gold surface.

Monolayers of monomer 1,3,5-tri(4-bromophenyl)benzene (TBPB) and the dimerized product 3,3''',5,5'''-tetra(4-bromophenyl)quaterphenyl (TBPQ) on a gold surface have been studied using ambient scanning tunneling microscopy and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Molecular layers are prepared by allowing sessile drops of solution to dry on a gold substrate. For room-temperature deposition we observe ordered arrays of TBPB in three distinct packing arrangements. Deposition on a heated substrate leads to the formation of the dimerized product, TBPQ, through a surface-induced aryl-aryl coupling. Regions of TBPQ coexist with regions of disordered multiply linked molecules. The conversion of monomer TPBP to dimers is confirmed using ToF-SIMS. Our results demonstrate an alternative, solution-phase approach to the formation of large molecules and nanostructures by coupling reactions.

Vernier templating and synthesis of a 12-porphyrin nano-ring.

Templates are widely used to arrange molecular components so they can be covalently linked into complex molecules that are not readily accessible by classical synthetic methods. Nature uses sophisticated templates such as the ribosome, whereas chemists use simple ions or small molecules. But as we tackle the synthesis of larger targets, we require larger templates-which themselves become synthetically challenging. Here we show that Vernier complexes can solve this problem: if the number of binding sites on the template, n(T), is not a multiple of the number of binding sites on the molecular building blocks, n(B), then small templates can direct the assembly of relatively large Vernier complexes where the number of binding sites in the product, n(P), is the lowest common multiple of n(B) and n(T) (refs 8, 9). We illustrate the value of this concept for the covalent synthesis of challenging targets by using a simple six-site template to direct the synthesis of a 12-porphyrin nano-ring with a diameter of 4.7 nm, thus establishing Vernier templating as a powerful new strategy for the synthesis of large monodisperse macromolecules.

Guest-induced growth of a surface-based supramolecular bilayer.

Self-assembly of planar molecules on a surface can result in the formation of a wide variety of close-packed or porous structures. Two-dimensional porous arrays provide host sites for trapping guest species of suitable size. Here we show that a non-planar guest species (C(60)) can play a more complex role by promoting the growth of a second layer of host molecules (p-terphenyl-3,5,3″,5″-tetracarboxylic acid) above and parallel to the surface so that self-assembly is extended into the third dimension. The addition of guest molecules and the formation of the second layer are co-dependent. Adding a planar guest (coronene) can displace the C(60) and cause reversion to a monolayer arrangement. The system provides an example of a reversible transformation between a planar and a non-planar supramolecular network, an important step towards the controlled self-assembly of functional, three-dimensional, surface-based supramolecular architectures.

Broken symmetry and the variation of critical properties in the phase behaviour of supramolecular rhombus tilings.

The tiling of surfaces has long attracted the attention of scientists, not only because it is intriguing intrinsically, but also as a way to control the properties of surfaces. However, although random tiling networks are studied increasingly, their degree of randomness (or partial order) has remained notoriously difficult to control, in common with other supramolecular systems. Here we show that the random organization of a two-dimensional supramolecular array of isophthalate tetracarboxylic acids varies with subtle chemical changes in the system. We quantify this variation using an order parameter and reveal a phase behaviour that is consistent with long-standing theoretical studies on random tiling. The balance between order and randomness is driven by small differences in intermolecular interaction energies, which can be related by numerical simulations to the experimentally measured order parameter. Significant variations occur with very small energy differences, which highlights the delicate balance between entropic and energetic effects in complex self-assembly processes.

Templating molecular adsorption using a covalent organic framework.

A two-dimensional nanoporous covalent organic framework can be prepared on a Au(111) substrate with near complete surface coverage and can be used to control the organisation of a sublimed layer of C(60).

Entropically stabilized growth of a two-dimensional random tiling.

The assembly of molecular networks into structures such as random tilings and glasses has recently been demonstrated for a number of two-dimensional systems. These structures are dynamically arrested on experimental time scales, so the critical regime in their formation is that of initial growth. Here, we identify a transition from energetic to entropic stabilization in the nucleation and growth of a molecular rhombus tiling. Calculations based on a lattice-gas model show that clustering of topological defects and the formation of faceted boundaries followed by a slow relaxation to equilibrium occur under conditions of energetic stabilization. We also identify an entropically stabilized regime in which the system grows directly into an equilibrium configuration without the need for further relaxation. Our results provide a methodology for identifying equilibrium and nonequilibrium randomness in the growth of molecular tilings, and we demonstrate that equilibrium spatial statistics are compatible with exponentially slow dynamical behavior.

Solubilized derivatives of perylenetetracarboxylic dianhydride (PTCDA) adsorbed on highly oriented pyrolytic graphite.

The effect on 2D molecular crystallization caused by the addition of propylthioether side groups to the 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) molecule is investigated using scanning tunneling microscopy (STM). The molecule was deposited from 1-phenyloctane onto highly oriented pyrolytic graphite (HOPG) and imaged at the liquid-solid interface. We observe a different structure to previously reported arrangements of PTCDA due to the presence of the propylthioether side groups which inhibits the formation of the herringbone phase. A model, supported by calculations based on density functional theory, is proposed in which molecules form rows stabilized by hydrogen bonding.

Molecular random tilings as glasses.

We have recently shown that p-terphenyl-3,5,3',5'-tetracarboxylic acid adsorbed on graphite self-assembles into a two-dimensional rhombus random tiling. This tiling is close to ideal, displaying long-range correlations punctuated by sparse localized tiling defects. In this article we explore the analogy between dynamic arrest in this type of random tilings and that of structural glasses. We show that the structural relaxation of these systems is via the propagation-reaction of tiling defects, giving rise to dynamic heterogeneity. We study the scaling properties of the dynamics and discuss connections with kinetically constrained models of glasses.

Random tiling and topological defects in a two-dimensional molecular network.

A molecular network that exhibits critical correlations in the spatial order that is characteristic of a random, entropically stabilized, rhombus tiling is described. Specifically, we report a random tiling formed in a two-dimensional molecular network of p-terphenyl-3,5,3',5'-tetracarboxylic acid adsorbed on graphite. The network is stabilized by hexagonal junctions of three, four, five, or six molecules and may be mapped onto a rhombus tiling in which an ordered array of vertices is embedded within a nonperiodic framework with spatial fluctuations in a local order characteristic of an entropically stabilized phase. We identified a topological defect that can propagate through the network, giving rise to a local reordering of molecular tiles and thus to transitions between quasi-degenerate local minima of a complex energy landscape. We draw parallels between the molecular tiling and dynamically arrested systems, such as glasses.

Controlling pattern formation in nanoparticle assemblies via directed solvent dewetting.

We have achieved highly localized control of pattern formation in two-dimensional nanoparticle assemblies by direct modification of solvent dewetting dynamics. A striking dependence of nanoparticle organization on the size of atomic force microscope-generated surface heterogeneities is observed and reproduced in numerical simulations. Nanoscale features induce a rupture of the solvent-nanoparticle film, causing the local flow of solvent to carry nanoparticles into confinement. Microscale heterogeneities instead slow the evaporation of the solvent, producing a remarkably abrupt interface between different nanoparticle patterns.