RESUMEN
The electrical control and readout of molecular spin states are key for high-density storage. Expectations are that electrically-driven spin and vibrational excitations in a molecule should give rise to new conductance features in the presence of magnetic anisotropy, offering alternative routes to study and, ultimately, manipulate molecular magnetism. Here, we use inelastic electron tunneling spectroscopy to promote and detect the excited spin states of a prototypical molecule with magnetic anisotropy. We demonstrate the existence of a vibron-assisted spin excitation that can exceed in energy and in amplitude a simple excitation among spin states. This excitation, which can be quenched by structural changes in the magnetic molecule, is explained using first-principles calculations that include dynamical electronic correlations.
RESUMEN
Recent advances in scanning probe techniques rely on the chemical functionalization of the probe-tip termination by a single molecule. The success of this approach opens the prospect of introducing spin sensitivity through functionalization by a magnetic molecule. We used a nickelocene-terminated tip (Nc-tip), which offered the possibility of producing spin excitations on the tip apex of a scanning tunneling microscope (STM). When the Nc-tip was 100 picometers away from point contact with a surface-supported object, magnetic effects could be probed through changes in the spin excitation spectrum of nickelocene. We used this detection scheme to simultaneously determine the exchange field and the spin polarization of iron atoms and cobalt films on a copper surface with atomic-scale resolution.
RESUMEN
Vibronic excitations in molecules are key to the fundamental understanding of the interaction between vibrational and electronic degrees of freedom. In order to probe the genuine vibronic properties of a molecule even after its adsorption on a surface appropriate buffer layers are of paramount importance. Here, vibrational progression in both molecular frontier orbitals is observed with submolecular resolution on a graphene-covered metal surface using scanning tunnelling spectroscopy. Accompanying calculations demonstrate that the vibrational modes that cause the orbital replica in the progression share the same symmetry as the electronic states they couple to. In addition, the vibrational progression is more pronounced for separated molecules than for molecules embedded in molecular assemblies. The entire vibronic spectra of these molecular species are moreover rigidly shifted with respect to each other. This work unravels intramolecular changes in the vibronic and electronic structure owing to the efficient reduction of the molecule-metal hybridization by graphene.
RESUMEN
The active control of a molecular spin represents one of the main challenges in molecular spintronics. Up to now spin manipulation has been achieved through the modification of the molecular structure either by chemical doping or by external stimuli. However, the spin of a molecule adsorbed on a surface depends primarily on the interaction between its localized orbitals and the electronic states of the substrate. Here we change the effective spin of a single molecule by modifying the molecule/metal interface in a controlled way using a low-temperature scanning tunneling microscope. A nickelocene molecule reversibly switches from a spin 1 to 1/2 when varying the electrode-electrode distance from tunnel to contact regime. This switching is experimentally evidenced by inelastic and elastic spin-flip mechanisms observed in reproducible conductance measurements and understood using first principle calculations. Our work demonstrates the active control over the spin state of single molecule devices through interface manipulation.
RESUMEN
Inelastic electron tunneling spectroscopy (IETS) performed with the scanning tunneling microscope (STM) has been deemed as the ultimate tool for identifying chemicals at the atomic scale. However, direct IETS-based chemical analysis remains difficult due to the selection rules that await a definite understanding. We present IETS simulations of single formate and benzoate species adsorbed in the same upright bridge geometry on a (111)-cleaved Cu surface. In agreement with measurements on a related substrate, the simulated IET-spectra of formate/Cu(111) clearly resolve one intense C-H stretching mode whatever the tip position in the vicinity of the molecular fragment. At variance, benzoate/Cu(111) has no detectable IET signal. The dissimilar IETS responses of chemically related molecules--formate and benzoate adsorbates--permit us to unveil another factor that complements the selection rules, namely the degree of the vacuum extension of the tunneling active states perturbed by the vibrations. As a consequence, the lack of a topmost dangling bond orbital is entirely detrimental for STM-based inelastic spectroscopy but not for STM elastic imaging.
RESUMEN
Low sensitivity is a key problem in inelastic electron tunneling spectroscopy (IETS) with the scanning tunneling microscope. Using first-principles simulations, we predict different means to tune the IETS sensitivity of symmetrical functional aromatics on a Cu(111) surface. We show how the IET-spectra of phenyl-NO2 compounds can be greatly enhanced as compared to pristine phenyl. More precisely, the NO2 substituent qualifies as a sensitizer of low-frequency wagging modes, but also as a quencher of high-frequency stretching modes. At variance, the CO2 substituent is found to suppress the whole IET-activity. The head-up (non-anchoring) and head-down (anchoring) configurations of the functional group lead to minor changes in the signals, nevertheless allowing access to discriminate configurational features. It is shown how to disentangle the electronic and steric effects of the substituent in the STM junction.
RESUMEN
The epitaxial growth of graphene by chemical vapor deposition of ethylene on a Ru(0001) surface was monitored by high-temperature scanning tunneling microscopy. The in situ data show that at low pressures and high temperatures the metal surface facets into large terraces, leading to much better ordered graphene layers than resulting from the known growth mode. Density functional theory calculations show that the single terrace growth mode can be understood from the energetics of the graphene-metal interaction.
RESUMEN
We study the electronic mechanisms underlying the induction and propagation of chirality in achiral molecules deposited on surfaces. Combined scanning tunneling microscopy and ab initio electronic structure calculations of Cu-phthalocyanines adsorbed on Ag(100) reveal the formation of chiral molecular orbitals in structurally undistorted molecules. This effect shows that chirality can be manifest exclusively at the electronic level due to asymmetric charge transfer between molecules and substrate. Single molecule chirality correlates with attractive van der Waals interactions, leading to the propagation of chirality at the supramolecular level. Ostwald ripening provides an efficient pathway for complete symmetry breaking and self-assembly of homochiral supramolecular layers.
Asunto(s)
Metales/química , Adsorción , Transporte de Electrón , Indoles/química , Modelos Moleculares , Conformación Molecular , Compuestos Organometálicos/química , Teoría Cuántica , Plata/química , Estereoisomerismo , Propiedades de SuperficieRESUMEN
The structure of the commensurate (23x23) phase of graphene on Ru(0001) has been analyzed by quantitative low-energy electron diffraction (LEED)-I(V) analysis and density-functional theory calculations. The I(V) analysis uses Fourier components as fitting parameters to determine the vertical corrugation and the lateral relaxation of graphene and the top Ru layers. Graphene is shown to be strongly corrugated by 1.5 A with a minimum C-Ru distance of 2.1 A. Additionally, lateral displacements of C atoms and a significant buckling in the underlying Ru layers are observed, indicative for strong local C-Ru interactions.
RESUMEN
Graphene on Ru(0001) is contacted with Au tips of a cryogenic scanning tunneling microscope. The formation and conductance of single-atom contacts vary within the moiré unit cell. Density functional calculations reveal that elastic distortions of the graphene lattice occur at contact due to a selectively enhanced chemical reactivity of C atoms at hollow sites of Ru(0001). Concomitant quantum transport calculations indicate that the graphene-Ru distance determines the conductance variations.
RESUMEN
The future use of single-molecule magnets in applications will require the ability to control and manipulate the spin state and magnetization of the magnets by external means. There are different approaches to this control, one being the modification of the magnets by adsorption of small ligand molecules. In this paper we use iron phthalocyanine supported by an Au(111) surface as a model compound and demonstrate, using x-ray photoelectron spectroscopy and density functional theory, that the spin state of the molecule can be tuned to different values (S â¼ 0, [Formula: see text], 1) by adsorption of ammonia, pyridine, carbon monoxide or nitric oxide on the iron ion. The interaction also leads to electronic decoupling of the iron phthalocyanine from the Au(111) support.
Asunto(s)
Compuestos Ferrosos/química , Indoles/química , Modelos Químicos , Absorción , Simulación por Computador , Ligandos , Ensayo de Materiales , Marcadores de SpinRESUMEN
We study kinetic factors governing the diffusion and desorption of covalently grafted phenyl and dichlorocarbene radicals on graphene and carbon nanotubes. Our ab initio calculations of reaction rates show that isolated phenyls can easily desorb and diffuse at room temperature. On the contrary, paired phenyls are expected to remain grafted to the surface up to a few hundred degrees Celsius. In the case of dichlorocarbene, no clustering is observed; at room temperature, the isolated radicals remain covalently attached to small-diameter nanotubes but desorb easily from graphene. Our results on the thermal behavior of side moieties on graphitic surfaces could be used to optimize the tradeoff between reactivity and conductance of nanotubes in the process of covalent functionalization.
Asunto(s)
Grafito/química , Nanotecnología/métodos , Nanotubos de Carbono/química , Diseño de Equipo , Hidrocarburos Clorados/química , Cinética , Modelos Químicos , Nanopartículas/química , Nanotubos/química , Propiedades de Superficie , Temperatura , TermodinámicaRESUMEN
Epitaxial graphene on Ru(0001) was studied by means of large-scale density functional theory (DFT) calculations. The results agree well with scanning tunneling microscopy experiments. In contrast to the current understanding, we show that the measured corrugation originates mainly from a geometric buckling of the graphene sheet, induced by alternating weak and strong chemical interactions with the Ru support. In the strong contact regions, charge transfer is evidenced and the opening of a considerable band gap in the graphene is found.
RESUMEN
Inelastic electron tunneling spectroscopy (IETS) performed with the scanning tunneling microscope (STM) has been deemed as the ultimate tool for identifying chemicals on the atomic scale. However, IETS-based chemical analysis is error-prone due to the numerous degrees of freedom of chemisorbed molecular systems. First-principles simulations of IETS are presented that, by quantitative comparison with the experimental spectra, permit one to determine the final products of an STM-induced reaction on chemisorbed benzene. Our simulations reveal that IETS possesses an enhanced sensitivity to atomic structure as compared to topographic imaging due to both its energy and space resolution.
RESUMEN
Scanning tunneling microscopy (STM) images of water submonolayers on Pd(111) reveal quasiperiodic and isolated adclusters with internal structure that would ordinarily be ascribed to icelike puckered hexagonal units. However, density functional theory and STM simulations contradict this conventional picture, showing instead that the water adlayers are composed mainly of flat-lying molecules arranged in planar water hexagons. A new rule for two dimensional (2D) water growth is offered that generates the structures observed experimentally from planar hexamer units.