Microfluidic capillary electrophoresis - mass spectrometry for rapid charge-variant and glycoform assessment of monoclonal antibody biosimilar candidates.

Early-stage cell line screening is a vital step in developing biosimilars of therapeutic monoclonal antibodies (mAbs). While the quality of the manufactured antibodies is commonly assessed by charge-based separation methods employing UV absorbance detection, these methods lack the ability to identify resolved mAb variants. We evaluated the performance of microfluidic capillary electrophoresis coupled to mass spectrometry (MCE-MS) as a rapid tool for profiling mAb biosimilar candidates from clonal cell lines. A representative originator sample was used to develop the MCE-MS method. The addition of dimethylsulfoxide (DMSO) to the background electrolyte yielded up to 60-fold enhancement of the protein MS signal. The resulting electropherograms consistently provided resolution of mAb charge variants within 10 min. Deconvoluted mass spectra facilitated the identification of basic variants such as C-terminal lysine and proline amidation, while the acidic variants could be assigned to deamidated forms. The MCE-MS method also allowed the identification of 18 different glycoforms in biosimilar samples. To mimic early-stage cell line selection, samples from five clonal cell lines that all expressed the same biosimilar candidate mAb were compared to their originator mAb. Based on the similarity observed in charge variants and glycoform profiles acquired by MCE-MS, the most promising candidate could be selected. The MCE-MS method demonstrated good overall reproducibility, as confirmed by a transferability study involving two separate laboratories. This study highlights the efficacy of the MCE-MS method for rapid proteoform screening of clonal cell line samples, underscoring its potential significance as an analytical tool in biosimilar process development.

Implementation of a LC-MS based multi-attribute method (MAM) and intact multi-attribute method (iMAM) workflow for the characterisation of a GLP-Fc fusion protein.

Over the past few years, the implementation of mass spectrometry (MS) in QC laboratories has become a more common occurrence. The multi-attribute method (MAM), and emerging intact multi-attribute method (iMAM), are powerful analytical tools utilising liquid chromatography-mass spectrometry (LC-MS) methods that enable the monitoring of critical quality attributes (CQAs) in biotherapeutic proteins in compliant settings. Both MAM and iMAM are intended to replace or supplement several conventional assays with a single LC-MS method utilising MS data in combination with robust, semi-automated data processing workflows. MAM and iMAM workflows can also be implemented into current Good Manufacturing Practices environments due to the availability of CFR 11 compliant chromatography data system software. In this study, MAM and iMAM are employed for the analysis of 4 batches of a glucagon-like peptide-Fc fusion protein. MAM approach involved a first the discovery phase for the identification of CQAs and second, the target monitoring phase of the selected CQAs in other samples. New peak detection was performed on the data set to determine the appearance, absence or change of any peak. For native iMAM workflow both size exclusion and strong cation exchange chromatography were optimized for the identification and monitoring of CQAs at the intact level.

Quantitative Analysis of Poloxamer 188 in Biotherapeutic Process Streams Using Liquid Chromatography-Triple-Quadrupole Mass Spectrometry.

Poloxamer 188, also known as Pluronic F-68, is an excipient added to the biotherapeutic protein-manufacturing process. Poloxamer 188 (P188) is a nonionic triblock copolymer surfactant that can be used as a shear protective excipient in bioreactors. In the current study, a method for the process clearance monitoring of poloxamer 188 during downstream processing of biotherapeutics using liquid chromatography-triple-quadrupole mass spectrometry was developed and validated. Chromatographic separation of P188 was achieved using a Phenomenex, Luna 3 µm phenyl-hexyl, 150 × 2 mm column, and quantitation was achieved using a triple-quadrupole mass spectrometer operated in selected reaction monitoring mode. Linearity was assessed over a working range of 250-10,000 ng/mL. Precision and accuracy were within 15% of the theoretical spike levels assessed across the three different concentration levels. For this study, two different IgG1 antibodies were used for the method validation activities. Analyte specificity and selectivity were deemed acceptable based on no extraneous peaks present. System suitability was evaluated throughout this study in anticipation of the introduction of this method into the quality control environment. This method was successfully validated and used to monitor the clearance of poloxamer 188 in a tangential flow filtration purification step during biotherapeutic downstream processing. In addition, the capability of the method to successfully support poloxamer 188 mixing studies is presented in this work.

A Direct Comparison of rAAV5 Variants Derived from the Baculovirus Expression System Using LC-MS Workflows Demonstrates Key Differences in Overall Production Yield, Product Quality and Vector Efficiency.

Gene therapy holds great promise for the treatment of severe diseases, and adeno-associated virus (AAV) vectors have emerged as valuable tools in this field. However, challenges such as immunogenicity and high production costs complicate the commercial viability of AAV-based therapies. To overcome these barriers, improvements in production yield, driven through the availability of robust and sensitive characterization techniques that allow for the monitoring of critical quality attributes to deepen product and process understanding are crucial. Among the main attributes affecting viral production and performance, the ratio between empty and full capsids along with capsid protein stoichiometry are emerging as potential parameters affecting product quality and safety. This study focused on the production of AAV vectors using the baculovirus expression vector system (BEVS) in Sf9 cells and the complete characterization of AAV5 variants using novel liquid chromatography and mass spectrometry techniques (LC-MS) that, up to this point, had only been applied to reference commercially produced virions. When comparing virions produced using ATG, CTG or ACG start codons of the cap gene, we determined that although ACG was the most productive in terms of virus yield, it was also the least effective in transducing mammalian cells. This correlated with a low VP1/VP2 ratio and a higher percentage of empty capsids. Overall, this study provides insights into the impact of translational start codon modifications during rAAV5 production using the BEVS, the associated relationship with capsid packaging, capsid protein stoichiometry and potency. The developed characterization workflow using LC-MS offers a comprehensive and transferable analysis of AAV-based gene therapies, with the potential to aid in process optimization and facilitate the large-scale commercial manufacturing of these promising treatments.

Rapid characterization of adeno-associated virus (AAV) capsid proteins using microchip ZipChip CE-MS.

Adeno-associated viruses (AAVs) are viral vectors used as delivery systems for gene therapies. Intact protein characterization of AAV viral capsid proteins (VPs) and their post-translational modifications is critical to ensuring product quality. In this study, microchip-based ZipChip capillary electrophoresis-mass spectrometry (CE-MS) was applied for the rapid characterization of AAV intact VPs, specifically full and empty viral capsids of serotypes AAV6, AAV8 and AAV9, which was accomplished using 5 min of analysis time. Low levels of dimethyl sulfoxide (4%) in the background electrolyte (BGE) improved MS signal quality and component detection. A sensitivity evaluation revealed consistent detection of VP proteoforms when as little as 2.64 × 106 viral particles (≈26.4 picograms) were injected. Besides the traditional VP proteoforms used for serotype identification, multiple VP3 variants were detected, including truncated VP3 variants most likely generated by leaky scanning as well as unacetylated and un-cleaved VP3 proteoforms. Phosphorylation, known to impact AAV transduction efficiency, was also seen in all serotypes analysed. Additionally, low abundant fragments originating from either N- or C-terminus truncation were detected. As the aforementioned VP components can impact product quality and efficacy, the ZipChip's ability to rapidly characterize them illustrates its strength in monitoring product quality during AAV production.

Development of a Rapid Adeno-Associated Virus (AAV) Identity Testing Platform through Comprehensive Intact Mass Analysis of Full-Length AAV Capsid Proteins.

Adeno-associated viruses (AAVs) are commonly used as vectors for the delivery of gene therapy targets. Characterization of AAV capsid proteins (VPs) and their post-translational modifications (PTMs) have become a critical attribute monitored to evaluate product quality. Liquid chromatography-mass spectrometry (LC-MS) analysis of intact AAV VPs provides both quick and reliable serotype identification as well as proteoform information on each VP. Incorporating these analytical strategies into rapid good manufacturing practice (GMP)-compliant workflows containing robust, but simplified, data processing methods is necessary to ensure effective product quality control (QC) during production. Here, we present a GMP-compliant LC-MS workflow for the rapid identification and in-depth characterization of AAVs. Hydrophilic interaction liquid chromatography (HILIC) MS with difluoroacetic acid as a mobile phase modifier is utilized to achieve the intact separation and identification of AAV VPs and their potential proteoforms. Peptide mapping is performed to confirm PTMs identified during intact VP analysis and for in-depth PTM characterization. The intact separations platform is then incorporated into a data processing workflow developed using GMP-compliant software capable of rapid AAV serotype identification and, if desired, specific serotype PTM monitoring and characterization. Such a platform provides product QC capabilities that are easily accessible in a regulatory setting.

Multi-Attribute Method (MAM) Analytical Workflow for Biotherapeutic Protein Characterization from Process Development to QC.

The multi-attribute method (MAM) has emerged significantly in recent years to support biotherapeutic protein characterization from process development to the QC environment. MAM is a liquid chromatography mass spectrometry (LC-MS) based peptide mapping approach, which combines the benefits from liquid chromatography coupled to high resolution accurate mass mass spectrometry (LC-HRAM MS), enabling direct assessment of protein sequence and product quality attributes with site specificity. These product quality attributes may impact efficacy, safety, stability, and process robustness. MAM is intended to replace conventional analytical approaches as it offers a more streamlined strategy for parallel monitoring of multiple attributes in a single analysis with high sensitivity and confidence, and ultimately supports more robust Quality by Design (QbD) approaches and faster decision cycles for biotherapeutic development. MAM consists of three main stages. The first stage is sample digestion, which typically entails proteolytic digestion of the protein. The second stage is reversed-phase chromatographic separation of the generated peptides and detection by HRAM MS in two phases. During MAM Phase I (discovery phase), data-dependent acquisition (DDA) MS/MS is performed to enable confident identification of peaks and development of a peptide workbook. During MAM Phase II (monitoring phase), full MS acquisition is only carried out for the monitoring of predefined product quality attributes (PQAs). The third stage is data processing, which entails analysis and reporting for each of the two phases including evaluation of sequence coverage, assessment of PQAs and peptide workbook creation during phase I, and targeted monitoring of predefined product attributes and new peak detection (NPD) during phase II. The latter is a comparative analysis that uses a base peak alignment algorithm to determine any non-monitored differences between the LC-MS chromatograms of a test sample and a reference standard. © 2023 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: In-solution sample digestion Alternate Protocol: Automated sample digestion Basic Protocol 2: Reversed-phase chromatographic separation and detection by HRAM-MS (RPLC-HRAM MS) Basic Protocol 3: Data processing and reporting.

Automated Online-Sampling Multidimensional Liquid Chromatography with Feedback-Control Capability as a Framework for Real-Time Monitoring of mAb Critical Quality Attributes in Multiple Bioreactors.

Real-time monitoring of biopharmaceutical reactors is becoming increasingly important as the processes become more complex. During the continuous manufacturing of monoclonal antibodies (mAbs), the desired mAb product is continually created and collected over a 30 day process, where there can be changes in quality over that time. Liquid chromatography (LC) is the workhorse instrumentation capable of measuring mAb concentration as well as quality attributes such as aggregation, charge variants, oxidation, etc. However, traditional offline sampling is too infrequent to fully characterize bioprocesses, and the typical time from sample generation to data analysis and reporting can take weeks. To circumvent these limitations, an automated online sampling multidimensional workflow was developed to enable streamlined measurements of mAb concentration, aggregation, and charge variants. This analytical framework also facilitates automated data export for real-time analysis of up to six bioreactors, including feedback-controlling capability using readily available LC technology. This workflow increases the data points per bioreactor, improving the understanding of each experiment while also reducing the data turnaround time from weeks to hours. Examples of effective real-time analyses of mAb critical quality attributes are illustrated, showing substantial throughput improvements and accurate results while minimizing labor and manual intervention.

CAR Gene Delivery by T-cell Targeted Lentiviral Vectors is Enhanced by Rapamycin Induced Reduction of Antiviral Mechanisms.

Lentiviral vectors (LV) have become the dominant tool for stable gene transfer into lymphocytes including chimeric antigen receptor (CAR) gene delivery to T cells, a major breakthrough in cancer therapy. Yet, room for improvement remains, especially for the latest LV generations delivering genes selectively into T cell subtypes, a key requirement for in vivo CAR T cell generation. Toward improving gene transfer rates with these vectors, whole transcriptome analyses on human T lymphocytes are conducted after exposure to CAR-encoding conventional vectors (VSV-LV) and vectors targeted to CD8+ (CD8-LV) or CD4+ T cells (CD4-LV). Genes related to quiescence and antiviral restriction are found to be upregulated in CAR-negative cells exposed to all types of LVs. Down-modulation of various antiviral restriction factors, including the interferon-induced transmembrane proteins (IFITMs) is achieved with rapamycin as verified by mass spectrometry (LC-MS). Strikingly, rapamycin enhances transduction by up to 7-fold for CD8-LV and CD4-LV without compromising CAR T cell activities but does not improve VSV-LV. When administered to humanized mice, CD8-LV results in higher rates of green fluorescent protein (GFP) gene delivery. Also in vivo CAR T cell generation is improved in kinetics and tumor control, however to a moderate extent, leaving room for improvement by optimizing the rapamycin administration schedule. The data favor multi-omics approaches for improvements in gene delivery.

Mass spectrometry friendly pH-gradient anion exchange chromatography for the separation of full and empty adeno-associated virus (AAV) capsids.

The proportion of full and empty capsids represents a critical quality attribute of adeno-associated virus (AAV)-based therapeutics. In this study, pH-gradient anion exchange chromatography was utilized for the separation of full and empty capsid species. The developed method allowed for applicability to multiple AAV serotypes and facilitated subsequent mass spectrometric detection of intact AAVs. This is the first study demonstrating generic applicability as well as mass spectrometric compatibility, allowing for a more sophisticated analysis of AAV-based gene therapy and paving the way for future developments in the field.

Exploring Charge-Detection Mass Spectrometry on Chromatographic Time Scales.

Charge-detection mass spectrometry (CDMS) enables direct measurement of the charge of an ion alongside its mass-to-charge ratio. CDMS offers unique capabilities for the analysis of samples where isotopic resolution or the separation of charge states cannot be achieved, i.e., heterogeneous macromolecules or highly complex mixtures. CDMS is usually performed using static nano-electrospray ionization-based direct infusion with acquisition times in the range of several tens of minutes to hours. Whether CDMS analysis is also attainable on shorter time scales, e.g., comparable to chromatographic peak widths, has not yet been extensively investigated. In this contribution, we probed the compatibility of CDMS with online liquid chromatography interfacing. Size exclusion chromatography was coupled to CDMS for separation and mass determination of a mixture of transferrin and ß-galactosidase. Molecular masses obtained were compared to results from mass spectrometry based on ion ensembles. A relationship between the number of CDMS spectra acquired and the achievable mass accuracy was established. Both proteins were found to be confidently identified using CDMS spectra obtained from a single chromatographic run when peak widths in the range of 1.4-2.5 min, translating to 140-180 spectra per protein were achieved. After demonstration of the proof of concept, the approach was tested for the characterization of the highly complex glycoprotein α-1-acid glycoprotein and the Fc-fusion protein etanercept. With chromatographic peak widths of approximately 3 min, translating to ∼200 spectra, both proteins were successfully identified, demonstrating applicability for samples of high inherent molecular complexity.

Degradation of polysorbate investigated by a high-performance liquid chromatography multi-detector system with charged aerosol and mass detection.

Polysorbate 80 is widely used as a formulation component in biopharmaceutical drug products. Recent studies have shown that polysorbate 80 is readily degraded either through direct or indirect means. The degradation of polysorbate 80 causes a concern for the long-term stability of biopharmaceutical drug product, as the breakdown products of polysorbate 80 have been shown to cause adverse effects, such as formation of sub-visible and visible particles and mAb aggregation. Understanding the path and extent of degradation is of a paramount importance for the formulator during formulation development. A multi-detector HPLC system using charged aerosol and mass detection was developed and optimized for the characterization of polysorbate 80 standards. The system included a post-column make-up flow, i.e. an inverse gradient, that enabled constant eluent composition at the detectors. The inverse gradient eliminated the main source of variability for the charged aerosol detector response, thereby enabling the calculation of the mass balance between polysorbate components with different degrees of esterification. Extracted ion chromatograms of the mass detector combined with their respective retention times were used to qualitatively characterize the polysorbate samples down to the individual components. The system was applied to study the degradation of several polysorbate standards which occurred by enzymatic digestion or long-term storage. The system provided detailed information on the mechanism of degradation without the need for additional orthogonal analytical techniques.

SP3-based host cell protein monitoring in AAV-based gene therapy products using LC-MS/MS.

Residual host cell proteins (HCPs) represent a critical quality attribute of biotherapeutic drug products. Workflows enabling reliable HCP detection in monoclonal antibodies and recombinant proteins have been developed, which facilitated process optimization to improve product stability and safety, and allowed setting of acceptance limits for HCP content. However, the detection of HCPs in gene therapy products such as adeno-associated viral (AAV) vectors has been limited. Here, the use of SP3 sample preparation followed by liquid chromatography-mass spectrometry (LC-MS) analysis for HCP profiling in various AAV samples is reported. Suitability of the workflow is demonstrated and provided data constitutes an important reference for future work aiming towards a knowledge-driven improvement of manufacturing conditions and characterization of AAV vector products.

Multi-Attribute Method (MAM): An Emerging Analytical Workflow for Biopharmaceutical Characterization, Batch Release and cGMP Purity Testing at the Peptide and Intact Protein Level.

The rapid growth of biotherapeutic industry, with more and more complex molecules entering the market, forces the need for advanced analytical platforms that can quickly and accurately identify and quantify product quality attributes. Mass spectrometry has the potential to provide more detailed information about the quality attributes of complex products, and MS methods are more sensitive than UV methods for detection of impurities. The multi-attribute method (MAM), a liquid chromatography-mass spectrometry based analytical approach is an emerging platform which supports biotherapeutic characterization and cGMP testing. The main advantage lies in the ability to monitor multiple quality attributes in a single assay, both at the peptide and the intact level, facilitating streamlined biopharmaceutical production, from research and development to the QC environment. This review highlights the current landscape of the MAM approach with special attention given to increased analytical throughput, general requirements for QC in terms of instrumentation and software, regulatory requirements, and industry acceptance of the MAM platform.

Cation exchange chromatography on a monodisperse 3 µm particle enables extensive analytical similarity assessment of biosimilars.

Biosimilarity assessment requires extensive characterization and comparability exercises to investigate product quality attributes of an originator product and its potential biosimilar(s) and to highlight any differences between them. Performing a thorough comparison allows a shortened approval path, which also eliminates lengthy and expensive clinical trials, ensuring comparable product quality and efficacy but at lower drug prices. The wide variety of analytical methods available for biosimilar assessment ranges from biological to analytical assays, each providing orthogonal information to fully characterize biosimilar candidates. Intact native mass spectrometry (MS) has been shown to be an excellent tool for detection and monitoring of important quality attributes such as N-glycosylation, deamidation, sequence truncation and higher order structures. When combined with efficient upfront separation methods, simplification of the proteoform heterogeneity and associated complexity prior to MS analysis can be achieved. Native mass spectrometry can provide robust and accurate results within short analysis times and requires minimal sample preparation. In this study we report the use of a monodisperse strong cation exchange chromatography phase hyphenated with Orbitrap mass spectrometry (SCX-MS) to compare the best-selling biopharmaceutical product Humira® with 7 commercially approved biosimilar products. SCX-MS analysis allowed for the identification of previously described as well as so far unreported proteoforms and their relative quantitation across all samples, revealing differences in N-glycosylation and lysine truncation, as well as unique features for some products such as sialylation and N-terminal clipping. SCX-MS analysis, powered by a highly efficient separation column, enabled deep and efficient analytical comparison of biosimilar products.

Exploring proteoforms of the IgG2 monoclonal antibody panitumumab using microchip capillary electrophoresis-mass spectrometry.

The IgG2 type monoclonal antibody panitumumab is an anti-epidermal growth factor receptor (EGFR) drug used for the treatment of EGFR-expressing, chemotherapy resistant, metastatic colorectal carcinoma. In this study, panitumumab drug product was first analysed using size exclusion chromatography coupled to mass spectrometry for rapid identity testing. The experimental data led to the identification of two panitumumab isoforms with several prominent forms remaining unidentified, despite apparently low sample complexity. Microchip capillary electrophoresis-mass spectrometry (CE-MS) was subsequently utilised for a more detailed characterization. It was observed that panitumumab is subject to partial N-terminal pyroglutamate formation. Incomplete conversion is uncharacteristic for N-terminally exposed glutamines and in case of panitumumab gives rise to forms which show successive mass offsets of 17 Da, respectively. If not separated before mass spectrometric analysis, e.g. by capillary electrophoresis, such near isobaric species coalesce into single MS peaks, which subsequently hampers or prevents their assignment. With a total of 42 panitumumab isoforms assigned by CE-MS, these observations highlight a potential pitfall of commonly applied rapid identity testing workflows and demonstrate that even low complexity biopharmaceuticals can require separation strategies which offer high separation selectivity for species close in mass.

Multi-attribute method (MAM) to assess analytical comparability of adalimumab biosimilars.

Adalimumab drug product (Humira ®), the first fully human monoclonal antibody (mAb) approved by FDA in 2002, led the top ten list of best-selling mAbs in 2018 and has been the most profitable drug in the world. With the expiration of patent protection in Europe in 2018 and in United States by 2023, the landscape is changing as up to 10 adalimumab biosimilars are expected to enter the market in the US. Biosimilars offer the potential to lower costs on health care systems and increase patient accessibility. The analytical similarity of seven different adalimumab biosimilars was accomplished in the present study using the multi-attribute method (MAM), a LC-MS based peptide mapping technique that allows for primary sequence assessment and evaluation of multiple quality attributes including deamidation, oxidation, succinimide formation, N- and C- terminal composition and detailed N-glycosylation analysis. In the first step, characterization of the most relevant post-translational modifications of a reference product was attained during the discovery phase of MAM. During the second step, as part of the MAM targeted monitoring phase, adalimumab batch-to batch variability was evaluated to define statistical intervals for the establishment of similarity ranges. The third step describes biosimilarity evaluation of predefined quality attributes and new peak detection for the assessment of any new or modified peak compared to the reference product. This study highlights a new perspective of the MAM approach and its underlying power for biotherapeutic comparability exercises in addition to analytical characterization. MAM offers a streamlined comparability assessment workflow based on high-confidence quality attribute analysis using high-resolution accurate mass mass spectrometry (HRAM MS) and the capability to detect any new or modified peak compared to the reference product.

Comprehensive multi-attribute method workflow for biotherapeutic characterization and current good manufacturing practices testing.

The multi-attribute method (MAM) is a liquid chromatography-mass spectrometry (LC-MS)-based method that is used to directly characterize and monitor numerous product quality attributes (PQAs) at the amino acid level of a biopharmaceutical product. MAM enables identity testing based on primary sequence verification, detection and quantitation of post-translational modifications and impurities. This ability to simultaneously and directly determine PQAs of therapeutic proteins makes MAM a more informative, streamlined and productive workflow than conventional chromatographic and electrophoretic assays. MAM relies on proteolytic digestion of the sample followed by reversed-phase chromatographic separation and high-resolution LC-MS analysis in two phases. First, a discovery study to determine quality attributes for monitoring is followed by the creation of a targeted library based on high-resolution retention time plus accurate mass analysis. The second aspect of MAM is the monitoring phase based on the target peptide library and new peak detection using differential analysis of the data to determine the presence, absence or change of any species that might affect the activity or stability of the biotherapeutic. The sample preparation process takes between 90 and 120 min, whereas the time spent on instrumental and data analyses might vary from one to several days for different sample sizes, depending on the complexity of the molecule, the number of attributes to be monitored and the information to be detailed in the final report. MAM is developed to be used throughout the product life cycle, from process development through upstream and downstream processes to quality control release or under current good manufacturing practices regulations enforced by regulatory agencies.

Intact multi-attribute method (iMAM): A flexible tool for the analysis of monoclonal antibodies.

The availability of rapid methods that can accurately define and quantify biopharmaceutical critical quality attributes has been the driving force for the implementation of mass spectrometry techniques throughout the development and production pipeline. While the multi-attribute method (MAM) has become widely adopted and developed, some critical information cannot be monitored through this workflow, such as correct chain assembly or the presence of fragments or aggregates. In this study, we combine intact protein mass spectrometry and the multi-attribute method to create an intact multi-attribute method - or iMAM. Using a CFR Part 11 compliant data system, we evaluated the proposed workflow using several intact analysis approaches under both denaturing and native conditions. As for the standard MAM approach, iMAM involves the generation of an intact protein target workbook which is created from the analysis of a reference sample, with ID confirmation obtained from deconvolution results and chromatographic retention times, while quantitation is obtained from the intensities of the m/z of most abundant charge states. The created processing method is then applied to the analysis of subsequent samples. New peak detection can also be performed, monitoring the number of components revealed after each analysis. The entire data process can be automated to generate a report within the chromatography data system software. Three case studies presented herein show the potential of iMAM for implementation at different stages of the production pipeline, from product development to stability testing and batch release.

Correlative N-glycan and charge variant analysis of cetuximab expressed in murine, chinese hamster and human expression systems.

A well-defined and controlled glycosylation pattern is important to maintain quality and safety of therapeutic proteins. Glycosylation is strongly dependent on the host cell line used for recombinant protein expression. Cetuximab, which is produced in mouse myeloma cells has been shown to harbour Fab glycans, which contain non-human like features and hence, can potentially cause an immunogenic response in patients. In light of the advent of biosimilar and biobetter development, we produced cetuximab variants in human embryonic kidney (HEK293) and Chinese hamster ovary (CHO) cells. A combination of orthogonal chromatographic modes such as hydrophilic interaction, size exclusion and strong cation exchange chromatography with various detection strategies was employed to characterise the three different cetuximab variants and to compare the in-house produced HEK and CHO variants with the reference drug product. While Fc galactosylation and sialic acid content of the drug product and the HEK variant were highly similar, the CHO product showed lower galactosylation on Fc glycans and a comparatively low sialic acid content in the Fab region. The elevated high-mannose content of CHO cetuximab also suggests potential rapid clearence from circulation. The combination of multiple chromatographic separation modes has proven powerful for the characterisation of expression system dependent protein quality attributes such as N-glycosylation.