Synthesis, Biological Properties, and Molecular Docking Study of Novel 1,2,3-Triazole-8-quinolinol Hybrids.

A new series of 1,2,3-triazole-8-quinolinol hybrids were synthesized in good yields using monosubstituted acetonitriles and 5-azidomethyl-8-quinolinol as the starting reagents via a one-step protocol. The structures of 1,2,3-triazole-8-quinolinol hybrids were characterized by nuclear magnetic resonance (1H and 13C NMR) spectroscopy and elemental analysis. Antibacterial activity in vitro of all the synthesized hybrids was investigated against Escherichia coli (E. coli), Xanthomonas fragariae (X. fragariae), Staphylococcus aureus (S. aureus), and Bacillus subtilis (B. subtilis) applying the methods of disk diffusion and minimal inhibition concentration (MIC). Hybrid 7 exhibited excellent antibacterial capacity, with an MIC value of 10 µg/mL against S. aureus and 20 µg/mL against B. subtilis, E. coli, and X. fragariae, which were comparable to those that of the standard antibiotic nitroxoline. A structure-activity relationship (SAR) study of 1,2,3-triazole-8-quinolinol hybrids showed that introducing electron-donating substituents in the 1,2,3-triazole ring at the 4-position is important for activity. Quantum chemical calculations have been undertaken to employ the Gaussian software in the B3LYP, HF, and M062X basis sets using 3-21g, 6-31g, and SDD levels to further explain linkages within the antibacterial findings. Furthermore, molecular docking investigations were also conducted to investigate the binding affinities as well as the interactions of some hybrids with the target proteins. An absorption, distribution, metabolism, excretion, and toxicity (ADME/T) investigation was carried out to scrutinize the viability of employing the 1,2,3-triazole-8-quinolinol hybrids as medicines.

Magnesium Bismuth Ferrite Nitrogen-Doped Carbon Nanomagnetic Perovskite: Synthesis and Characterization as a High-Performance Electrode in a Supercapacitor for Energy Storage.

Bismuth ferrite (BiFeO3) is regarded as an important ABO3 perovskite in the areas of energy storage and electronics. A high-performance novel MgBiFeO3-NC nanomagnetic composite (MBFO-NC) electrode was prepared using a perovskite ABO3-inspired method as a supercapacitor for energy storage. The electrochemical behavior of the perovskite BiFeO3 has been enhanced by magnesium ion doping in the basic aquatic electrolyte as the A-site. H2-TPR revealed that the doping of Mg2+ ions at the Bi3+ sites minimizes the oxygen vacancy content and improves the electrochemical characteristics of MgBiFeO3-NC. Various techniques were used to confirm the phase, structure, surface, and magnetic properties of the MBFO-NC electrode. The prepared sample showed an enhanced mantic performance and specific area with an average nanoparticle size of ∼15 nm. The electrochemical behavior of the three-electrode system was shown by cyclic voltammetry to have a significant specific capacity of 2079.44 F/g at 30 mV/s in 5 M KOH electrolyte. GCD analysis at a 5 A/g current density also showed an enhanced capacity improvement of 2159.88 F/g, which is 3.4× higher than that of pristine BiFeO3. At the power density of 5284.83 W/kg, the constructed MBFO-NC//MBFO-NC symmetric cell showed an exceptional energy density of 730.04 W h/kg. The MBFO-NC//MBFO-NC symmetric cell was employed as a direct practical application of the electrode material to entirely brighten the laboratory panel, which had 31 LEDs. This work proposes the utilization of duplicate cell electrodes made of MBFO-NC//MBFO-NC in portable devices for daily use.

Designing dibenzosilole core based, A2-π-A1-π-D-π-A1-π-A2 type donor molecules for promising photovoltaic parameters in organic photovoltaic cells.

In this research work, four new molecules from the π-A-π-D-π-A-π type reference molecule "DBS-2PP", were designed for their potential application in organic solar cells by adding peripheral A2 acceptors to the reference. Under density functional theory, a comprehensive theoretical investigation was conducted to examine the structural geometries, along with the optical and photovoltaic parameters; comprising frontier molecular orbitals, density of states, light-harvesting effectiveness, excitation, binding, and reorganizational energies, molar absorption coefficient, dipole moment, as well as transition density matrix of all the molecules under study. In addition, some photo-voltaic characteristics (open circuit photo-voltage and fill factor) were also studied for these molecules. Although all the developed compounds (D1-D4) surpassed the reference molecule in the attributes mentioned above, D4 proved to be the best. D4 possessed the narrowest band-gap, as well as the highest absorption maxima and dipole moment of all the molecules in both the evaluated phases. Moreover, with PC61BM as the acceptor, D4 showed the maximum V OC and FF values. Furthermore, while D3 had the greatest hole mobility owing to its lowest value of hole reorganization energy, D4 exhibited the maximum electron mobility due to its lowermost value of electron reorganization energy. Overall, all the chromophores proposed in this study showed outstanding structural, optical, and photovoltaic features. Considering this, organic solar cell fabrication can be improved by using these newly derived donors at the donor-acceptor interfaces.

Correction: Thiophene derivatives as corrosion inhibitors for 2024-T3 aluminum alloy in hydrochloric acid medium.

[This corrects the article DOI: 10.1039/D2RA00185C.].

Thiophene derivatives as corrosion inhibitors for 2024-T3 aluminum alloy in hydrochloric acid medium.

Thiophene derivatives, namely (E)-thiophene-2-carbaldehyde oxime (OXM) and (E)-5-(thiophen-2-yl)-1H-tetrazole (TET), were synthesized and characterized via 1H and 13C NMR. Furthermore, their inhibitory property for AA2024-T3 in 1 M HCl solution was investigated via electrochemical impedance spectroscopy and potentiodynamic polarization at 293 K, together with DFT/B3LYP-based calculations. Numerous global and local descriptors of reactivity such as EHOMO, ELUMO, energy gap, electronegativity (χ), hardness (η), and frontier molecular orbital repartitions were investigated to describe the reactivity of each molecule. Alternatively, Monte Carlo simulations were performed under the solvation condition on the Al (111) surface to understand the adsorption behavior of the as-studied inhibitors deeply. The inhibition efficiency increased with an increase in the inhibitor concentration, achieving maximum values of 94.0% and 96% at 10-3 M, respectively. The polarization curves showed that the examined compounds act as mixed-type inhibitors. In addition, the adsorption of these compounds obeyed the Al Awady, Flory-Huggins and Temkin isotherms. The surface characterization analysis via SEM/EDX confirmed the presence of a barrier layer covering the aluminum surface. The experimental inhibition efficiencies were correlated with global descriptors, which confirmed that this theoretical study is useful for the protection of aluminum alloy metal in an acidic medium.

One step synthesis of NiO nanoparticles via solid-state thermal decomposition at low-temperature of novel aqua(2,9-dimethyl-1,10-phenanthroline)NiCl2 complex.

[NiCl2(C14H12N2)(H2O)] complex has been synthesized from nickel chloride hexahydrate (NiCl2·6H2O) and 2,9-dimethyl-1,10-phenanthroline (dmphen) as N,N-bidentate ligand. The synthesized complex was characterized by elemental analysis, infrared (IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy and differential thermal/thermogravimetric analysis (TG/DTA). The complex was further confirmed by single crystal X-ray diffraction (XRD) as triclinic with space group P-1. The desired complex, subjected to thermal decomposition at low temperature of 400 °C in an open atmosphere, revealed a novel and facile synthesis of pure NiO nanoparticles with uniform spherical particle; the structure of the NiO nanoparticles product was elucidated on the basis of Fourier transform infrared (FT-IR), UV-vis spectroscopy, TG/DTA, XRD, scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDXS) and transmission electron microscopy (TEM).

Synthesis and characterization of hybrid materials consisting of n-octadecyltriethoxysilane by using n-hexadecylamine as surfactant and Q(0) and T(0) cross-linkers.

Novel hybrid xerogel materials were synthesized by a sol-gel procedure. n-octadecyltriethoxysilane was co-condensed with and without different cross-linkers using Q(0) and T(0) mono-functionalized organosilanes in the presence of n-hexadecylamine with different hydroxyl silica functional groups at the surface. These polymer networks have shown new properties, for example, a high degree of cross-linking and hydrolysis. Two different synthesis steps were carried out: simple self-assembly followed by sol-gel transition and precipitation of homogenous sols. Due to the lack of solubility of these materials, the compositions of the new materials were determined by infrared spectroscopy, (13)C and (29)Si CP/MAS NMR spectroscopy and scanning electron microscopy.

(2,9-Dimethyl-1,10-phenanthroline-κN,N')diiodidocadmium.

In the title compound, [CdI(2)(C(14)H(12)N(2))], the mol-ecule sits on a crystallographic twofold axis. The coordination sphere of the Cd(II) atom is built of two symmetry-equivalent N atoms of one 2,9-dimethyl-1,10-phenanthroline (dmphen) ligand and two symmetry-equivalent I atoms, thus forming a distorted tetra-hedral geometry. Inversion-related mol-ecules inter-act along the c-axis direction by π-π stacking inter-actions between the phenanthroline ring systems, with centroid-centroid distances of 3.707 (9) and 3.597 (10) Å.

Dibromido(2,9-dimethyl-1,10-phenanthroline-κN,N')cadmium.

In the title complex, [CdBr(2)(C(14)H(12)N(2))], the Cd(II) ion is tetra-coordinated by two N atoms of the bidentate 2,9-dimethyl-1,10-phenanthroline ligand and two bromide ions in a substanti-ally distorted CdN(2)Br(2) tetra-hedral geometry. In the crystal, inversion dimers linked by pairs of weak C-H⋯Br bonds generate R(2) (2)(14) loops. Aromatic π-π stacking [shortest centroid-centroid separation = 3.633 (2) Å] inter-actions occur within, and also link, the dimers into chains propagating parallel to [100].

Synthesis and characterization of the trihalophosphine compounds of ruthenium [RuX2(eta(6)-cymene)(PY3)] (X = Cl, Br, Y = F, Cl, Br) and the related PF2(NMe2) and P(NMe2)3 compounds; multinuclear NMR spectroscopy and the X-ray single crystal structures of [RuBr2(eta(6)-cymene)(PF3)], [RuBr2(eta(6)-cymene)(PF2{NMe2})], and [RuI2(eta(6)-cymene)(P{NMe2}3)].

Treatment of the dimers [RuX2(eta(6)-cymene)]2 with PF3 in hot heptane produces the compounds [RuX2(eta(6)-cymene)(PF3)] (X = Cl, Br, I) in good yield. Difluoro(dimethylamino)phosphine and tris(dimethylamino)phosphine react similarly to produce the compounds [RuX2(eta(6)-cymene)(PF2{NMe2})] and [RuX2(eta(6)-cymene)(P{NMe2}3)]. Reaction of the dimers [RuX2(eta(6)-cymene)]2 with PCl3 and PBr3 proceeded with the production of mononuclear products which had undergone halogen exchange at ruthenium in some cases. (1)H, (13)C, (31)P, and (19)F NMR spectra have been obtained where appropriate together with ((1)H-(1)H) correlation spectroscopy (COSY) and ((13)C-(1)H)-HETCORR spectra of selected compounds. The variation of (1)J((31)P-(19)F) with the nature of the auxiliary ligand (X) in the PF3 and PF2(NMe2) complexes has been examined both experimentally and computationally using a natural localized molecular orbital-natural bond order approach. The single crystal X-ray structure of [RuBr2(eta(6)-cymene)(PF3)] has been determined at 223 K and those of [RuBr2(eta(6)-cymene)(PF2{NMe2})] and [RuI2(eta(6)-cymene)(P{NMe2}3)] at 294 K.