RESUMEN
We report the synthesis of vertically aligned silicon nanowire (VA-SiNW) oligomer arrays coated with Au nanoparticle (NP) monolayers via a combination of colloidal lithography, metal-assisted chemical etching, and directed NP assembly. Arrays of SiNW monomers (i.e., isolated NWs), dimers, and tetramers are synthesized, decorated with AuNPs, and tested for their performance in surface-enhanced Raman spectroscopy. The â¼20 nm AuNPs easily enter within the ca. 40 nm gaps of the SiNW oligomers, thus reaching the hot spot region. At 785 nm excitation, the AuNPs@SiNW dimer arrays provide the highest Raman signal, in agreement with electromagnetic simulations showing a high electric field enhancement at the Au/Si interface within the dimer gap region.
RESUMEN
We report the use of thermal dewetting to structure gold-based catalytic etching masks for metal-assisted chemical etching (MACE). The approach involves low-temperature dewetting of metal films to generate metal holey meshes with tunable morphologies. Combined with MACE, dewetting-assisted patterning is a simple, benchtop route to synthesize Si nanotubes, Si nanowalls, and Si nanowires with defined dimensions and optical properties. The approach is compatible with the synthesis of both black and colored nanostructured silicon substrates. In particular, we report the lithography-free fabrication of silicon nanowires with diameters down to 40 nm that support leaky wave-guiding modes, giving rise to vibrant colors. Additionally, micrometer-sized areas with tunable film composition and thickness were patterned via shadow masking. After dewetting and MACE, such patterned metal films produced regions with distinct nanostructured silicon morphologies and colors. To-date, the fabrication of colored silicon has relied on complicated nanoscale patterning processes. Dewetting-assisted patterning provides a simpler alternative that eliminates this requirement. Finally, the simple transfer of resonant SiNWs into ethanolic solutions with well-defined light absorption properties is reported. Such solution-dispersible SiNWs could open new avenues for the fabrication of ultrathin optoelectronic devices with enhanced and tunable light absorption.
RESUMEN
The fate of photogenerated charges within ferroelectric metal oxides is key for photocatalytic applications. The authors study the contributions of i) tetragonal distortion, responsible for spontaneous polarization, and ii) point defects, on charge separation and recombination within BaTiO3 (BTO) nanocrystals of cubic and tetragonal structure. Electron paramagnetic resonance (EPR) in combination with O2 photoadsorption experiments show that BTO nanocrystals annealed at 600 °C have a charge separation yield enhanced by a factor > 10 compared to TiO2 anatase nanocrystals of similar geometries. This demonstrates for the first time the beneficial effect of the BTO perovskite nanocrystal lattice on charge separation. Strikingly, charge separation is considerably hindered within BTO nanoparticles annealed ≥ 600 °C, due to the formation of Ba-O divacancies that act as charge recombination centers. The opposing interplay between tetragonal distortion and annealing-induced defect formation inside the lattice highlights the importance of defect engineering within perovskite nanoparticles.
RESUMEN
Gold nanoparticle/silicon composites are canonical substrates for sensing applications because of their geometry-dependent physicochemical properties and high sensing activity via surface-enhanced Raman spectroscopy (SERS). The self-assembly of gold nanoparticles (AuNPs) synthesized via wet-chemistry on functionalized flat silicon (Si) and vertically aligned Si nanowire (VA-SiNW) arrays is a simple and cost-effective approach to prepare such substrates. Herein, we report on the critical parameters that influence nanoparticle coverage, aggregation, and assembly sites in two- and three-dimensions to prepare substrates with homogeneous optical properties and SERS activity. We show that the degree of AuNP aggregation on flat Si depends on the silane used for the Si functionalization, while the AuNP coverage can be adjusted by the incubation time in the AuNP solution, both of which directly affect the substrate properties. In particular, we report the reproducible synthesis of nearly touching AuNP chain monolayers where the AuNPs are separated by nanoscale gaps, likely to be formed due to the capillary forces generated during the drying process. Such substrates, when used for SERS sensing, produce a uniform and large enhancement of the Raman signal due to the high density of hot spots that they provide. We also report the controlled self-assembly of AuNPs on VA-SiNW arrays, which can provide even higher Raman signal enhancement. The directed assembly of the AuNPs in specific regions of the SiNWs with a control over NP density and monolayer morphology (i.e., isolated vs nearly touching NPs) is demonstrated, together with its influence on the resulting SERS activity.
RESUMEN
Vertically aligned silicon nanowire (VA-SiNW) arrays can significantly enhance light absorption and reduce light reflection for efficient light trapping. VA-SiNW arrays thus have the potential to improve solar cell design by providing reduced front-face reflection while allowing the fabrication of thin, flexible, and efficient silicon-based solar cells by lowering the required amount of silicon. Because their interaction with light is highly dependent on the array geometry, the ability to control the array morphology, functionality, and dimension offers many opportunities. Herein, after a short discussion about the remarkable optical properties of SiNW arrays, we report on our recent progress in using chemical and electrochemical methods to structure and pattern SiNW arrays in three dimensions, providing substrates with spatially controlled optical properties. Our approach is based on metal-assisted chemical etching (MACE) and three-dimensional electrochemical axial lithography (3DEAL), which are both affordable and large-scale wet-chemical methods that can provide a spatial resolution all the way down to the sub-5 nm range.
RESUMEN
Thanks to their tunable and strong interaction with light, plasmonic nanostructures have been investigated for a wide range of applications. In most cases, controlling the electric field enhancement at the metal surface is crucial. This can be achieved by controlling the metal nanostructure size, shape, and location in three dimensions, which is synthetically challenging. Electrochemical methods can provide a reliable, simple, and cost-effective approach to nanostructure metals with a high degree of geometrical freedom. Herein, we review the use of electrochemistry to synthesize metal nanostructures in the context of plasmonics. Both template-free and templated electrochemical syntheses are presented, along with their strengths and limitations. While template-free techniques can be used for the mass production of low-cost but efficient plasmonic substrates, templated approaches offer an unprecedented synthetic control. Thus, a special emphasis is given to templated electrochemical lithographies, which can be used to synthesize complex metal architectures with defined dimensions and compositions in one, two and three dimensions. These techniques provide a spatial resolution down to the sub-10 nanometer range and are particularly successful at synthesizing well-defined metal nanoscale gaps that provide very large electric field enhancements, which are relevant for both fundamental and applied research in plasmonics.
RESUMEN
A variety of multisegmented nanorods (NRs) composed of dense Au and porous Rh and Ru segments with lengths controlled down to ca. 10 nm are synthesized within porous anodic aluminum oxide membranes. Despite the high Rh and Ru porosity (i.e., â¼40%), the porous metal segments are able to efficiently couple with the longitudinal localized surface plasmon resonance (LSPR) of Au NRs. Finite-difference time-domain simulations show that the LSPR wavelength can be precisely tuned by adjusting the Rh and Ru porosity. Additionally, light absorption inside Rh and Ru segments and the surface electric field (E-field) at Rh and Ru can be independently and selectively enhanced by varying the position of the Rh and Ru segment within the Au NR. The ability to selectively control and decouple the generation of high-energy, surface hot electrons and low-energy, bulk hot electrons within photocatalytic metals such as Rh and Ru makes these bimetallic structures great platforms for fundamental studies in plasmonics and hot-electron science.
RESUMEN
Developing simple, inexpensive, and environmentally benign approaches to integrate morphologically well-defined nanoscale building blocks into larger high surface area materials is a key challenge in materials design and processing. In this work, we investigate the fundamental surface phenomena between MgO and water (both adsorption and desorption) with particles prepared via a vapor-phase process (MgO nanocubes) and a modified aerogel process (MgO(111) nanosheets). Through these studies, we unravel a strategy to assemble individual MgO nanoparticles into extended faceted single-crystalline MgO nanosheets and nanorods with well-defined exposed surfaces and edges. This reorganization can be triggered by the presence of H2O vapor or bulk liquid water. Water adsorption and the progressive conversion of vapor-phase grown oxide particles into hydroxides give rise to either one-dimensional or two-dimensional (1D or 2D) structures of high dispersion and surface area. The resulting Mg(OH)2 lamella with a predominant (001) surface termination are well-suited precursor structures for their topotactic conversion into laterally extended and uniform MgO(111) grain surface configurations. To understand the potential of polar (111) surfaces for faceting and surface reconstruction effects associated with water desorption, we investigated the stability of MgO(111) nanosheets during vacuum annealing and electron beam exposure. The significant surface reconstruction of the MgO(111) surfaces observed shows that adsorbate-free (111)-terminated surfaces of unsupported MgO nanostructures reconstruct rather than remain as charged planes of either three-fold coordinated O2- ion or Mg2+ ions. Thus, here we demonstrate the role water can play in surface formation and reconstruction by bridging wet chemical and surface science inspired approaches.
RESUMEN
Metal-silicon nanowire array photoelectrodes provide a promising architecture for water-splitting because they can afford high catalyst loading and decouple charge separation from the light absorption process. To further improve and understand these hybrid nanowire photoelectrodes, control of the catalyst amount and location within the wire array is required. Such a level of control is currently synthetically challenging to achieve. Here, we report the synthesis of cm2-sized hybrid silicon nanowire arrays with electrocatalytically active Ni-Mo and Pt patches placed at defined vertical locations within the individual nanowires. Our method is based on a modified three-dimensional electrochemical axial lithography (3DEAL), which combines metal-assisted chemical etching (MACE) to produce Si nanowires with spatially defined SiO2 protection layers to selectively cover and uncover specific areas within the nanowire arrays. This spatioselective SiO2 passivation yields nanowire arrays with well-defined exposed Si surfaces, with feature sizes down to 100 nm in the axial direction. Subsequent electrodeposition directs the growth of the metal catalysts at the exposed silicon surfaces. As a proof of concept, we report photoelectrocatalytic activity of the deposited catalysts for the hydrogen evolution reaction on p-type Si nanowire photocathodes. This demonstrates the functionality of these hybrid metal/Si nanowire arrays patterned via 3DEAL, which paves the way for investigations of the influence of three-dimensional geometrical parameters on the conversion efficiency of nanostructured photoelectrodes interfaced with metal catalysts.
RESUMEN
The combination of metal-assisted chemical etching (MACE) with colloidal lithography has emerged as a simple and cost-effective approach to nanostructure silicon. It is especially efficient at synthesizing Si micro- and nanowire arrays using a catalytic metal mesh, which sinks into the silicon substrate during the etching process. The approach provides a precise control over the array geometry, without requiring expensive nanopatterning techniques. Although MACE is a high-throughput solution-based approach, achieving large-scale homogeneity can be challenging because of the instability of the metal catalyst when the experimental parameters are not set appropriately. Such instabilities can lead to metal film fracture, significantly damaging the substrate and thus compromising the nanowire array quality. Here, we report on the critical parameters that influence the stability of the metal catalyst layer for achieving large-scale homogeneous MACE: etchant composition, metal film thickness, adhesion layer thickness, nanowire diameter and pitch, metal film coverage, Si/Au/etchant interface length, and crystalline quality of the colloidal template (grain size and defects). Our results investigate the origin of the catalyst film fracture and reveal that MACE experiments should be optimized for each Si wire array geometry by keeping the etch rate below a certain threshold. We show that the Si/Au/etchant interface length also affects the etch rate and should thus be considered when optimizing the MACE experimental parameters. Finally, our results demonstrate that colloidal templates with small grain sizes (i.e., <100 µm2) can yield significant problems during the pattern transfer because of a high density of defects at the grain boundaries that negatively affects the metal film stability. As such, this work provides guidelines for the large-scale synthesis of Si micro- and nanowire arrays via MACE, relevant for both new and experienced researchers working with MACE.
RESUMEN
We report on a quick, simple, and cost-effective solution-phase approach to prepare centimeter-sized morphology-graded vertically aligned Si nanowire arrays. Gradients in the nanowire diameter and shape are encoded through the macroscale substrate via a "dip-etching" approach, where the substrate is removed from a KOH etching solution at a constant rate, while morphological control at the nanowire level is achieved via sequential metal-assisted chemical etching and KOH etching steps. This combined approach provides control over light absorption and reflection within the nanowire arrays at both the macroscale and nanoscale, as shown by UV-vis spectroscopy and numerical three-dimensional finite-difference time-domain simulations. Macroscale morphology gradients yield arrays with gradually changing optical properties. Nanoscale morphology control is demonstrated by synthesizing arrays of bisegmented nanowires, where the nanowires are composed of two distinct segments with independently controlled lengths and diameters. Such nanowires are important to tailor light-matter interactions in functional devices, especially by maximizing light absorption at specific wavelengths and locations within the nanowires.
RESUMEN
A templated electrochemical technique for patterning macroscopic arrays of single-crystalline Si micro- and nanowires with feature dimensions down to 5 nm is reported. This technique, termed three-dimensional electrochemical axial lithography (3DEAL), allows the design and parallel fabrication of hybrid silicon nanowire arrays decorated with complex metal nano-ring architectures in a flexible and modular approach. While conventional templated approaches are based on the direct replication of a template, our method can be used to perform high-resolution lithography on pre-existing nanostructures. This is made possible by the synthesis of a porous template with tunable dimensions that guides the deposition of well-defined metallic shells around the Si wires. The synthesis of a variety of ring architectures composed of different metals (Au, Ag, Fe, and Ni) with controlled sequence, height, and position along the wire is demonstrated for both straight and kinked wires. We observe a strong enhancement of the Raman signal for arrays of Si nanowires decorated with multiple gold rings due to the plasmonic hot spots created in these tailored architectures. The uniformity of the fabrication method is evidenced by a homogeneous increase in the Raman signal throughout the macroscopic sample. This demonstrates the reliability of the method for engineering plasmonic fields in three dimensions within Si wire arrays.
RESUMEN
Surface-enhanced Raman scattering (SERS) is a versatile spectroscopic technique that suffers from reproducibility issues and usually requires complex substrate fabrication processes. In this article, we report the use of a simple mass production technology based on Blu-ray disc manufacturing technology to prepare large area SERS substrates (â¼40 mm2) with a high degree of homogeneity (±7% variation in Raman signal) and enhancement factor of â¼6 × 106. An industrial high throughput injection molding process was used to generate periodic microstructured polymer substrates coated with a thin Ag film. A short chemical etching step produces a highly dense layer of Ag nanoparticles at the polymer surface, which leads to a large and reproducible Raman signal. Finite difference time domain simulations and cathodoluminescence mapping experiments suggest that the sample microstructure is responsible for the generation of SERS active nanostructures around the microwells. Comparison with commercial SERS substrates demonstrates the validity of our method to prepare cost-efficient, reliable, and sensitive SERS substrates.
RESUMEN
BACKGROUND: Activity retention upon enzyme adsorption on inorganic nanostructures depends on different system parameters such as structure and composition of the support, composition of the medium as well as enzyme loading. Qualitative and quantitative characterization work, which aims at an elucidation of the microscopic details governing enzymatic activity, requires well-defined model systems. RESULTS: Vapor phase-grown and thermally processed anatase TiO2 nanoparticle powders were transformed into aqueous particle dispersions and characterized by dynamic light scattering and laser Doppler electrophoresis. Addition of ß-galactosidase (ß-gal) to these dispersions leads to complete enzyme adsorption and the generation of ß-gal/TiO2 heteroaggregates. For low enzyme loadings (~4% of the theoretical monolayer coverage) we observed a dramatic activity loss in enzymatic activity by a factor of 60-100 in comparison to that of the free enzyme in solution. Parallel ATR-IR-spectroscopic characterization of ß-gal/TiO2 heteroaggregates reveals an adsorption-induced decrease of the ß-sheet content and the formation of random structures leading to the deterioration of the active site. CONCLUSIONS: The study underlines that robust qualitative and quantitative statements about enzyme adsorption and activity retention require the use of model systems such as anatase TiO2 nanoparticle agglomerates featuring well-defined structural and compositional properties.
Asunto(s)
Nanopartículas/química , Titanio/química , beta-Galactosidasa/química , Adsorción , Activación Enzimática , Concentración de Iones de Hidrógeno , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Porosidad , Propiedades de Superficie , AguaRESUMEN
We report the isotropic etching of 2D and 3D polystyrene (PS) nanosphere hcp arrays using a benchtop O2 radio frequency plasma cleaner. Unexpectedly, this slow isotropic etching allows tuning of both particle diameter and shape. Due to a suppressed etching rate at the point of contact between the PS particles originating from their arrangement in 2D and 3D crystals, the spherical PS templates are converted into polyhedral structures with well-defined hexagonal cross sections in directions parallel and normal to the crystal c-axis. Additionally, we found that particles located at the edge (surface) of the hcp 2D (3D) crystals showed increased etch rates compared to those of the particles within the crystals. This indicates that 2D and 3D order affect how nanostructures chemically interact with their surroundings. This work also shows that the morphology of nanostructures periodically arranged in 2D and 3D supercrystals can be modified via gas-phase etching and programmed by the superlattice symmetry. To show the potential applications of this approach, we demonstrate the lithographic transfer of the PS template hexagonal cross section into Si substrates to generate Si nanowires with well-defined hexagonal cross sections using a combination of nanosphere lithography and metal-assisted chemical etching.
RESUMEN
Water vapor is ubiquitous under ambient conditions and may alter the shape of nanoparticles. How to utilize water adsorption for nanomaterial functionality and structure formation, however, is a yet unexplored field. Herein, we report the use of water vapor to induce the self-organization of MgO nanocubes into regularly staggered one-dimensional structures. This transformation evolves via an initial alignment of the MgO cubes, the formation of intermediate elongated Mg(OH)2 structures, and their reconversion into MgO cubes arranged in staggered structures. Abâ initio DFT modelling identifies surface-energy changes associated with the cube surface hydration and hydroxylation to promote the uncommon staggered stacked assembly of the cubes. This first observation of metal oxide nanoparticle self-organization occurring outside a bulk solution may pave novel routes for inducing texture in ceramics and represents a great test-bed for new surface-science concepts.
RESUMEN
Particle/particle interfaces play a crucial role in the functionality and performance of nanocrystalline materials such as mesoporous metal oxide electrodes. Defects at these interfaces are known to impede charge separation via slow-down of transport and increase of charge recombination, but can be passivated via electrochemical doping (i.e., incorporation of electron/proton pairs), leading to transient but large enhancement of photoelectrode performance. Although this process is technologically very relevant, it is still poorly understood. Here we report on the electrochemical characterization and the theoretical modeling of electron traps in nanocrystalline rutile TiO2 films. Significant changes in the electrochemical response of porous films consisting of a random network of TiO2 particles are observed upon the electrochemical accumulation of electron/proton pairs. The reversible shift of a capacitive peak in the voltammetric profile of the electrode is assigned to an energetic modification of trap states at particle/particle interfaces. This hypothesis is supported by first-principles theoretical calculations on a TiO2 grain boundary, providing a simple model for particle/particle interfaces. In particular, it is shown how protons readily segregate to the grain boundary (being up to 0.6 eV more stable than in the TiO2 bulk), modifying its structure and electron-trapping properties. The presence of hydrogen at the grain boundary increases the average depth of traps while at the same time reducing their number compared to the undoped situation. This provides an explanation for the transient enhancement of the photoelectrocatalytic activity toward methanol photooxidation which is observed following electrochemical hydrogen doping of rutile TiO2 nanoparticle electrodes.
RESUMEN
Physisorbed water originating from exposure to the ambient can have a strong impact on the structure and chemistry of oxide nanomaterials. The effect can be particularly pronounced when these oxides are in physical contact with a solid substrate such as the ones used for immobilization to perform electron or ion microscopy imaging. We used helium ion microscopy (HIM) and investigated morphological changes of vapor-phase-grown MgO cubes after vacuum annealing and pressing into foils of soft and high purity indium. The indium foils were either used as obtained or, for reference, subjected to vacuum drying. After four days of storage in the vacuum chamber of the microscope and at a base pressure of p < 10(-7) mbar, we observed on these cubic particles the attack of residual physisorbed water molecules from the indium substrate. As a result, thin magnesium hydroxide layers spontaneously grew, giving rise to characteristic volume expansion effects, which depended on the size of the particles. Rounding of the originally sharp cube edges leads to a significant loss of the morphological definition specific to the MgO cubes. Comparison of different regions within one sample before and after exposure to liquid water reveals different transformation processes, such as the formation of Mg(OH)2 shells that act as diffusion barriers for MgO dissolution or the evolution of brucite nanosheets organized in characteristic flower-like microstructures. The findings underline the significant metastability of nanomaterials under both ambient and high-vacuum conditions and show the dramatic effect of ubiquitous water films during storage and characterization of oxide nanomaterials.
RESUMEN
We report a template-based technique for the preparation of solution-dispersible nanorings composed of Au, Ag, Pt, Ni, and Pd with control over outer diameter (60-400 nm), inner diameter (25-230 nm), and height (40 nm to a few microns). Systematic and independent control of these parameters enables fine-tuning of the three characteristic localized surface plasmon resonance modes of Au nanorings and the resulting solution-based extinction spectra from the visible to the near-infrared. This synthetic approach provides a new pathway for solution-based investigations of surfaces with negative curvature.
RESUMEN
The optical and electrical properties of heterogeneous nanowires are profoundly related to their composition and nanoscale architecture. However, the intrinsic constraints of conventional synthetic and lithographic techniques have limited the types of multi-compositional nanowire that can be created and studied in the laboratory. Here, we report a high-throughput technique that can be used to prepare coaxial nanowires with sub-10â nm control over the architectural parameters in both axial and radial dimensions. The method, termed coaxial lithography (COAL), relies on templated electrochemical synthesis and can create coaxial nanowires composed of combinations of metals, metal oxides, metal chalcogenides and conjugated polymers. To illustrate the possibilities of the technique, a core/shell semiconductor nanowire with an embedded plasmonic nanoring was synthesized--a structure that cannot be prepared by any previously known method--and its plasmon-excitation-dependent optoelectronic properties were characterized.