RESUMEN
We have developed a convenient protocol for synthesizing N-(2-pyridyl)-substituted 4-(amino)quinazolin-2(1H)-ones by reacting N,N-dimethyl-N'-pyridylureas with 2-aminobenzonitriles. The method relies on the ability of N,N-dimethyl-N'-pyridyl/quinolinyl ureas to act as masked isocyanates under thermal activation, followed by a Dimroth rearrangement of 4-imino-3-(hetaryl)-3,4-dihydroquinazolin-2(1H)-ones. Conducted at 120 °C, either in DMF or under solvent-free conditions, this approach has produced 28 derivatives of 4-aminoquinazolinones, featuring pyridine or quinoline substituents, with yields of up to 92%.
RESUMEN
The nucleophilic addition of 3-(4-cyanopyridin-2-yl)-1,1-dimethylurea (1) to cis-[Pt(CNXyl)2Cl2] (2) gave a new cyclometallated compound 3. It was characterized by NMR spectroscopy (1H, 13C, 195Pt) and high-resolution mass spectrometry, as well as crystallized to obtain two crystalline forms (3 and 3·2MeCN), whose structures were determined by X-ray diffraction. In the crystalline structure of 3, two conformers (3A and 3B) were identified, while the structure 3·2MeCN had only one conformer 3A. The conformers differed by orientation of the N,N-dimethylcarbamoyl moiety relative to the metallacycle plane. In both crystals 3 and 3·2MeCN, the molecules of the Pt(II) complex are associated into supramolecular dimers, either {3A}2 or {3B}2, via stacking interactions between the planes of two metal centers, which are additionally supported by hydrogen bonding. The theoretical consideration, utilizing a number of computational approaches, demonstrates that the C···dz2(Pt) interaction makes a significant contribution in the total stacking forces in the geometrically optimized dimer [3A]2 and reveals the dz2(Pt)âπ*(PyCN) charge transfer (CT). The presence of such CT process allowed for marking the C···Pt contact as a new example of a rare studied phenomenon, namely, tetrel bonding, in which the metal site acts as a Lewis base (an acceptor of noncovalent interaction).
Asunto(s)
Bases de Lewis , Platino (Metal) , Ligandos , Enlace de Hidrógeno , Polímeros , UreaRESUMEN
The cis- and trans-isomers of 6-(3-(3,4-dichlorophenyl)-1,2,4-oxadiazol-5-yl)cyclohex-3-ene-1-carboxylic acid (cis-A and trans-A) were obtained by the reaction of 3,4-dichloro-N'-hydroxybenzimidamide and cis-1,2,3,6-tetrahydrophthalic anhydride. Cocrystals of cis-A with appropriate solvents (cis-A⧽(1,2-DCE), cis-A⧽(1,2-DBE), and cis-A⧽C6H14) were grown from 1,2-dichloroethane (1,2-DCE), 1,2-dibromoethane (1,2-DBE), and a n-hexane/CHCl3 mixture and then characterized by X-ray crystallography. In their structures, cis-A is self-assembled to give a hybrid 2D supramolecular organic framework (SOF) formed by the cooperative action of O-Hâ¯O hydrogen bonding, Clâ¯O halogen bonding, and πâ¯π stacking. The self-assembled cis-A divides the space between the 2D SOF layers into infinite hollow tunnels incorporating solvent molecules. The energy contribution of each noncovalent interaction to the occurrence of the 2D SOF was verified by several theoretical approaches, including MEP and combined QTAIM and NCIplot analyses. The consideration of the theoretical data proved that hydrogen bonding (approx. -15.2 kcal/mol) is the most important interaction, followed by πâ¯π stacking (approx. -11.1 kcal/mol); meanwhile, the contribution of halogen bonding (approx. -3.6 kcal/mol) is the smallest among these interactions. The structure of the isomeric compound trans-A does not exhibit a 2D SOF architecture. It is assembled by the combined action of hydrogen bonding and πâ¯π stacking, without the involvement of halogen bonds. A comparison of the cis-A structures with that of trans-A indicated that halogen bonding, although it has the lowest energy in cis-A-based cocrystals, plays a significant role in the crystal design of the hybrid 2D SOF. The majority of the reported porous halogen-bonded organic frameworks were assembled via iodine and bromine-based contacts, while chlorine-based systems-which, in our case, are structure-directing-were unknown before this study.
Asunto(s)
Halógenos , Yodo , Hidrógeno , Bromo , Cloro , SolventesRESUMEN
A new route for the synthesis of quinazolin-2,4(1H,3H)-diones and thieno [2,3-d]pyrimidine-2,4(1H,3H)-diones substituted by pyridyl/quinolinyl moiety in position 3 has been developed. The proposed method concluded in an annulation of substituted anthranilic esters or 2-aminothiophene-3-carboxylates with 1,1-dimethyl-3-(pyridin-2-yl) ureas. The process consists of the formation of N-aryl-N'-pyridyl ureas followed by their cyclocondensation into the corresponding fused heterocycles. The reaction does not require the use of metal catalysts and proceeds with moderate to good yields (up to 89%). The scope of the method is more than 30 examples, including compounds with both electron-withdrawing and electron-donating groups, as well as diverse functionalities. At the same time, strong electron-acceptor substituents in the pyridine ring of the starting ureas reduce the product yield or even prevent the cyclocondensation step. The reaction can be easily scaled to gram quantities.
Asunto(s)
Ácidos Carboxílicos , Ésteres , CatálisisRESUMEN
A platinum polymer catalyst (Pt-PDMS) was synthesized by immobilization of a platinum catalytic complex in a polysiloxane chain using an azide-alkyne CuAAC cycloaddition. Insoluble Pt-PDMS can be used as an effective heterogeneous macrocatalyst for Si-O dehydrocoupling. Pt-PDMS is easy to recover, purify, and reuse again for heterogeneous catalysis.
RESUMEN
Five new copper(I) complexesâcomposed of the paired dibenzohalolium and [CuL2]- (L = 1,2,4-oxadiazolate) counterions in which O,O-atoms of the anion are simultaneously linked to the halogen atomâwere generated and isolated as the solid via the three-component reaction between [Cu(MeCN)4](BF4), sodium 1,2,4-oxadiazolates, and dibenzohalolium triflates (or trifluoroacetates). This reaction is different from the previously reported CuI-catalyzed arylation of 1,2,4-oxadiazolones by diaryliodonium salts. Inspection of the solid-state X-ray structures of the complexes revealed the strong three-center X···O,O (X = Br, I) halogen bonding occurred between the oxadiazolate moieties and dibenzohalolium cation. According to performed theoretical calculations, this noncovalent interaction (or noncovalent chelation) was recognized as the main force in the stabilization of the copper(I) complexes. An explanation for the different behavior of complexes, which provide either chelate or nonchelate binding, is based on the occurrence of additional -CH3···π interactions, which were also quantified.
RESUMEN
1,2,4-Oxadiazole is an essential motif in drug discovery represented in many experimental, investigational, and marketed drugs. This review covers synthetic methods that allow the conversion of different types of organic compounds into 1,2,4-oxadiazole at ambient temperature and the practical application of the latter approaches for the preparation of pharmaceutically important molecules. The discussed methods are divided into three groups. The first combines two-stage protocols requiring the preliminary preparation of O-acylamidoximes followed by cyclization under the action of organic bases. The advantages of this route are its swiftness, high efficiency of the cyclization process, and uncomplicated work-up. However, it requires the preparation and isolation of O-acylamidoximes as a separate preliminary step. The second route is a one-pot synthesis of 1,2,4-oxadiazoles directly from amidoximes and various carboxyl derivatives or aldehydes in aprotic bipolar solvents (primarily DMSO) in the presence of inorganic bases. This recently proposed pathway proved to be highly efficient in the field of medicinal chemistry. The third group of methods consists of diverse oxidative cyclizations, and these reactions have found modest application in drug design thus far. It is noteworthy that the reviewed methods allow for obtaining 1,2,4-oxadiazoles with thermosensitive functions and expand the prospects of using the oxadiazole core as an amide- or ester-like linker in the design of bioactive compounds.
Asunto(s)
Diseño de Fármacos , Oxadiazoles , Oxadiazoles/química , Temperatura , Descubrimiento de Drogas , CiclizaciónRESUMEN
We have developed a simple and convenient method for the synthesis of 3-aryl- and 3-hetaryl-1,2,4-oxadiazin-5-ones bearing an easily functionalizable (methoxycarbonyl)methyl group at position 6 via the reaction of aryl or hetaryl amidoximes with maleates or fumarates. The conditions for this reaction were optimized. Different products can be synthesized selectively in good yields depending on the base used and the ratio of reactants: substituted (1,2,4-oxadiazin-6-yl)acetic acids, corresponding methyl esters, or hybrid 3-(aryl)-6-((3-(aryl)-1,2,4-oxadiazol-5-yl)methyl)-4H-1,2,4-oxadiazin-5(6H)-ones. The reaction is tolerant to substituents' electronic and steric effects in amidoximes. As a result, a series of 2-(5-oxo-3-(p-tolyl)-5,6-dihydro-4H-1,2,4-oxadiazin-6-yl)acetic acids, their methyl esters, and 1,2,4-oxadiazoles based on them were prepared and characterized by HRMS, 1H, and 13C NMR spectroscopy. The structures of three of them were elucidated with X-ray diffraction.
Asunto(s)
Ésteres , Oxadiazoles , Oxadiazoles/química , Oximas , AcetatosRESUMEN
A concept of piezo-responsive hydrogen-bonded π-π-stacked organic frameworks made from Knoevenagel-condensed vanillin-barbiturate conjugates was proposed. Replacement of the substituent at the ether oxygen atom of the vanillin moiety from methyl (compound 3a) to ethyl (compound 3b) changed the appearance of the products from rigid rods to porous structures according to optical microscopy and scanning electron microscopy (SEM), and led to a decrease in the degree of crystallinity of corresponding powders according to X-ray diffractometry (XRD). Quantum chemical calculations of possible dimer models of vanillin-barbiturate conjugates using density functional theory (DFT) revealed that π-π stacking between aryl rings of the vanillin moiety stabilized the dimer to a greater extent than hydrogen bonding between carbonyl oxygen atoms and amide hydrogen atoms. According to piezoresponse force microscopy (PFM), there was a notable decrease in the vertical piezo-coefficient upon transition from rigid rods of compound 3a to irregular-shaped aggregates of compound 3b (average values of d33 coefficient corresponded to 2.74 ± 0.54 pm/V and 0.57 ± 0.11 pm/V), which is comparable to that of lithium niobate (d33 coefficient was 7 pm/V).
Asunto(s)
Barbitúricos , Oxígeno , Barbitúricos/química , Benzaldehídos , Hidrógeno , Enlace de Hidrógeno , Modelos MolecularesRESUMEN
Relying on a recently suggested protocol that furnishes convenient access to variously substituted 2-pyridyl ureas, twelve hitherto unknown Cu(II) complexes have been synthesized in the present work and their structures were evaluated by elemental analysis, HRMS, IR spectroscopy, and X-ray diffraction study. Two structural motifs ([Cu(L)2Cl]+[Cl]- or (Cu(L)2Cl2) depending on the substitution pattern on the 2-pyridine fragment were revealed. In addition, antiproliferative action of the obtained compounds have been investigated against lung cancer cell lines (A549, NCI-H460, NCI-H1975), and healthy WI-26 VA4 cells were used to monitor non-specific cytotoxicity. Two nitro-group substituted complexes Cu(U3)2Cl2 (IC50 = 39.6 ± 4.5 µM) and Cu(U11)2Cl2 (IC50 = 33.4 ± 3.8 µM) demonstrate enhanced activity against the drug resistant NCI-H1975 cells with moderate selectivity toward normal WI-26 VA4 cells. The antiproliferative mechanism of cell death underlying the growth inhibitory effect of the synthesized complexes was studied via additional experiments, including the cell cycle analysis and the apoptosis induction test. Reassuringly, certain 2-pyridyl urea-based Cu(II) complexes exerted cell line-specific antiproliferative effect which renders them valuable starting points for further unveiling the anticancer potential of this class of coordination compounds.
RESUMEN
A series of organometallic complexes containing an alkynylphosphinegold(I) fragment and a phenylene-terpyridine moiety connected together by flexible linker have been prepared using the specially designed terpyridine ligands. The compounds were studied crystallographically to reveal that all of them contain a linearly coordinated Au(I) atom and a free terpyridine moiety. The different orientations of the molecules relative to each other in the solid state determine the multiple noncovalent interactions such as antiparallel ππ stacking, CH-π, and CH-Au, but no aurophilic interactions are realized. The organometallic Au(I) complexes obtained show fluorescence in the solution and dual singlet-triplet emission in the solid state. This means that their photophysical behavior is determined by both intermolecular lattice-defined interactions and Au(I) atom introduction. Density functional theory computational analysis supported the assignment of emission to intraligand electronic transitions only inside the phenylene-terpyridine part with no Au(I) involved. In addition, a study of the nature of the excited states for the "dimer" with an antiparallel orientation of the terpyridine fragment showed that this orientation leads to the generation of abstracted singlet and triplet states, lowering their energy in comparison with the monomer complex. Thus, the complexes obtained can be qualified as examples of Au(I)-containing organometallic aggregation-induced-emission luminogens.
RESUMEN
C,N-Chelate deprotonated diaminocarbene platinum(II) complexes were synthesized by coupling coordinated isocyanides and azinyl-substituted ureas. The complexes act as catalysts of α,ω-divinylpolydimethylsiloxane and poly(dimethylsiloxane-co-methylhydrosiloxane) hydrosilylation cross-linking. Silicone rubbers obtained with (aminoisoquinoline)-containing complex 3d exhibit temperature-responsive luminescence. Their emission changes irreversibly when heated from 80-100 °C (green radiation) to 120 °C or more (blue radiation).
RESUMEN
A series of N-pyridyl ureas bearing 1,2,4- (1a, 2a, and 3a) and 1,3,4-oxadiazole moiety (1b, 2b, 3b) was prepared and characterized by HRMS, 1H and 13C NMR spectroscopy, as well as X-ray diffraction. The inspection of the crystal structures of (1-3)a,b and the Hirshfeld surface analysis made possible the recognition of the (oxadiazole)···(pyridine) and (oxadiazole)···(oxadiazole) interactions. The presence of these interactions was confirmed theoretically by DFT calculations, including NCI analysis for experimentally determined crystal structures as well as QTAIM analysis for optimized equilibrium structures. The preformed database survey allowed the verification of additional examples of relevant (oxadiazole)···π interactions both in Cambridge Structural Database and in Protein Data Bank, including the cocrystal of commercial anti-HIV drug Raltegravir.
Asunto(s)
Oxadiazoles , Cristalografía por Rayos X , Bases de Datos Factuales , Enlace de Hidrógeno , Modelos MolecularesRESUMEN
A novel catalyst-free synthesis of N-pyridin-2-yl, N-quinolin-2-yl, and N-isoquinolin-1-yl carbamates utilizes easily accessible N-hetaryl ureas and alcohols. The proposed environmentally friendly technique is suitable for the good-to-high yielding synthesis of a wide range of N-pyridin-2-yl or N-quinolin-2-yl substituted carbamates featuring electron-donating and electron-withdrawing groups in the azine rings and containing various primary, secondary, and even tertiary alkyl substituents at the oxygen atom (48-94%; 31 examples). The DFT calculation and experimental study showed that the reaction proceeds through the intermediate formation of hetaryl isocyanates. The method can be applied to obtain N-isoquinolin-1-yl carbamates, although in lower yields, and ethyl benzo[h]quinolin-2-yl carbamate has also been successfully synthesized (68%).
RESUMEN
Predominantly, carbon atoms of various species function as acceptors of noncovalent interactions when they are part of a π-system. Here, we report on the discovery of a halogen bond involving the isocyano carbon lone pair. The co-crystallization or mechanochemical liquid-assisted grinding of model mesityl isocyanide with four iodoperfluorobenezenes leads to a series of halogen-bonded adducts with isocyanides. The obtained adducts were characterized by single-crystal and powder X-ray diffraction, solid-state IR and 13C NMR spectroscopies, and also by thermogravimetric analysis. The formation of the halogen bond with the isocyano group leads to a strong reduction of the isocyanide odor (3- to 46-fold gas phase concentration decrease). This manipulation makes isocyanides more suitable for laboratory storage and usage while preserving their reactivity, which is found to be similar between the adducts and the parent isocyanide in some common transformations, such as ligation to metal centers and the multi-component Ugi reaction.
RESUMEN
Inspection of the X-ray structures of the newly prepared trans-[MII (CNXyl)2 (DAPT)2 ]Cl(BF4 ) (M=Pd, Pt; Xyl=2,6-Me2 C6 H3 ; DAPT=4,6-diaminopyrimidine-2(1H)-thione) complexes and the appropriate Hirshfeld molecular surface analysis allowed the recognition of the previously unknown π-holeâ â â metal interactions between a ligated isocyano group (acting as a π-hole donor) and the positively charged d8 -PtII and d8 -PdII metal centers (acting as nucleophiles); this is the first identification of π-holeâ â â metal interactions with triple-bond species. Results of DFT calculations followed by the topological analysis of the electron density distribution within the framework of Bader's theory (quantum theory of atoms in molecules, QTAIM) confirmed the presence of these contacts. The electrostatic surface potential calculations indicated that π-holeâ â â metal contacts are formed upon interaction between the electrophilic isocyano C atom (π-hole donor) and the nucleophilic d z 2 orbital of the metal centers, which act as π-hole acceptors. Available CCDC data were processed from the perspective of the π-holeâ â â metal interactions with isocyanide ligands, and their analysis disclosed the role of metal nucleophilicity in the corresponding π-hole acceptor ability.
RESUMEN
The reaction of cis-[PdCl2(CNXyl)2] (Xyl = 2,6-Me2C6H3) with the aminoazoles [1 H-imidazol-2-amine (1), 4 H-1,2,4-triazol-3-amine (2), 1 H-tetrazol-5-amine (3), 1 H-benzimidazol-2-amine (4), 1-alkyl-1 H-benzimidazol-2-amines, where alkyl = Me (5), Et (6)] in a 2:1 ratio in the presence of a base in CHCl3 at RT proceeds regioselectively and leads to the binuclear diaminocarbene complexes [(ClPdCNXyl)2{µ-C(N-azolyl)N(Xyl)CâNXyl}] (7-12; 73-91%). Compounds 7-12 were characterized by C, H, N elemental analyses, high-resolution ESI+-MS, Fourier transform infrared spectroscopy, 1D (1H, 13C) and 2D (1H,1H-COSY, 1H,1H-NOESY, 1H,13C-HSQC, 1H,13C-HMBC) NMR spectroscopies, and X-ray diffraction (XRDn). Inspection of the XRDn data and results of the Hirshfeld surface analysis suggest the presence in all six structures of intramolecular π-holeisocyanide···πarene interactions between the electrophilic C atom of the isocyanide moiety and the neighboring arene ring. These interactions also result in distortion of the Pd-C≡N-Xyl fragment from the linearity. Results of density functional theory calculations [M06/MWB28 (Pd) and 6-31G* (other atoms) level of theory] for model structures of 7-9 followed by the topological analysis of the electron density distribution within the framework of Bader's theory (QTAIM method) reveal the presence of these weak interactions also in a CHCl3 solution, and their calculated strength is 1.9-2.2 kcal/mol. The natural bond orbital analysis of 7-9 revealed that π(C-C)Xyl â π*(C-N)isocyanide charge transfer (CT) takes place along with the intramolecular π-holeisocyanide···πarene interactions. The observed π(C-C)Xyl â π*(C-N)isocyanide CT is due to ligation of the isocyanide to the metal center, whereas in the cases of the uncomplexed p-CNC6H4NC and CNXyl species, the effects of CT are negligible. Available CCDC data were processed from the perspective of isocyanide-involving π-hole···π interactions, disclosed the role of metal coordination in the π-hole donor ability of isocyanides, and verified the π-holeisocyanide···πarene interaction effect on the stabilization of the in-conformation in metal-bound acyclic diaminocarbenes.
RESUMEN
The reaction of cis-[PdCl2(CNCy)2] (1) with thiazol-2-amines (2-10) leads to the C,N-chelated diaminocarbene-like complexes [PdCl{ C(N(H)4,5-R2-thiazol-2-yl)NHCy}(CNCy)] (11-14; 82-91%) in the case of 4,5-R2-thiazol-2-amines (R, R = H, H (2), Me, Me (3), -(CH2)4- (4)) and benzothiazol-2-amine (5) or gives the diaminocarbene species cis-[PdCl2{C(N(H)Cy)N(H)4-R-thiazol-2-yl}(CNCy)] (15-19; 73-93%) for the reaction with 4-aryl-substituted thiazol-2-amines (R = Ph (6), 4-MeC6H4 (7), 4-FC6H4 (8), 4-ClC6H4 (9), 3,4-F2C6H3 (10)). Inspection of the single-crystal X-ray diffraction data for 15-17 and 19 suggests that the structures of all these species exhibit previously unrecognized bifurcated chalcogen-hydrogen bonding µ(S,N-H)Cl and also PdII···PdII metallophilic interactions. These noncovalent interactions collectively connect two symmetrically located molecules of 15-17 and 19, resulting in their solid-state dimerization. The existence of the µ(S,N-H)Cl system and its strength (6-9 kcal/mol) were additionally verified/estimated by a Hirshfeld surface analysis and DFT calculations combined with a topological analysis of the electron density distribution within the formalism of Bader's theory (AIM method) and NBO analysis. The observed noncovalent interactions are jointly responsible for the dimerization of 15-19 not only in the solid phase but also in CHCl3 solutions, as predicted theoretically by DFT calculations and confirmed experimentally by FTIR, HRESI-MS, 1H NMR, and diffusion coefficient NMR measurements. Available CCDC data were processed under the new moiety angle, and the observed µ(S,E-H)Cl systems were classified accordingly to E (E = N, O, C) type atoms.
RESUMEN
The reaction of cis-[PdCl2(CNXyl)2] (Xyl = 2,6-Me2C6H3) with various 1,3-thiazol- and 1,3,4-thiadiazol-2-amines in chloroform gives a mixture of two regioisomeric binuclear diaminocarbene complexes. For 1,3-thiazol-2-amines the isomeric ratio depends on the reaction conditions and kinetically (KRs) or thermodynamically (TRs) controlled regioisomers were obtained at room temperature and on heating, respectively. In CHCl3 solutions, the isomers are subject to reversible isomerization accompanied by the cleavage of Pd-N and C-N bonds in the carbene fragment XylNCN(R)Xyl. Results of DFT calculations followed by the topological analysis of the electron density distribution within the formalism of Bader's theory (AIM method) reveal that in CHCl3 solution the relative stability of the regioisomers (ΔGexp = 1.2 kcal/mol; ΔGcalcd = 3.2 kcal/mol) is determined by the energy difference between two types of the intramolecular chalcogen bonds, viz. S···Cl in KRs (2.8-3.0 kcal/mol) and S···N in TRs (4.6-5.3 kcal/mol). In the case of the 1,3,4-thiadiazol-2-amines, the regioisomers are formed in approximately equal amounts and, accordingly, the energy difference between these species is only 0.1 kcal/mol in terms of ΔGexp (ΔGcalcd = 2.1 kcal/mol). The regioisomers were characterized by elemental analyses (C, H, N), HRESI+-MS and FTIR, 1D (1H, 13C{1H}) and 2D (1H,1H-COSY, 1H,1H-NOESY, 1H,13C-HSQC, 1H,13C-HMBC) NMR spectroscopies, and structures of six complexes (three KRs and three TRs) were elucidated by single-crystal X-ray diffraction.
RESUMEN
This review is focused on the analysis of current data on new methods of alkenylation of arenes and heteroarenes with alkynes by transition metal catalyzed reactions, Bronsted/Lewis acid promoted transformations, and others. The synthetic potential, scope, limitations, and mechanistic problems of the alkenylation reactions are discussed. The insertion of an alkenyl group into aromatic and heteroaromatic rings by inter- or intramolecular ways provides a synthetic route to derivatives of styrene, stilbene, chalcone, cinnamic acid, various fused carbo- and heterocycles, etc.