RESUMEN
Since Dr. Theodor Schwann posed the extension of Cell Theory to mammals in 1839, scientists have dreamt up ways to interface with and influence the cells. Recently, considerable ground in this area is gained, particularly in the scope of bioelectronics. New advances in this area have provided with a means to record electrical activity from cells, examining neural firing or epithelial barrier integrity, and stimulate cells through applied electrical fields. Many of these applications utilize invasive implantation systems to perform this interaction in close proximity to the cells in question. Traditionally, the body's immune system fights back against these systems through the foreign body response, limiting the efficacy of long-term interactions. New technologies in tissue engineering, biomaterials science, and bioelectronics offer the potential to circumvent the foreign body response and create stable long-term biological interfaces. Looking ahead, the next advancements in the biomedical sciences can truly integrate, interface, and interact with the human body.
Asunto(s)
Ingeniería de Tejidos , Animales , Humanos , Materiales Biocompatibles , Cuerpo Humano , Ingeniería de Tejidos/métodosRESUMEN
Cochlear implants are a life-changing technology for those with severe sensorineural hearing loss, partially restoring hearing through direct electrical stimulation of the auditory nerve. However, they are known to elicit an immune response resulting in fibrotic tissue formation in the cochlea that is linked to residual hearing loss and suboptimal outcomes. Intracochlear fibrosis is difficult to track without postmortem histology, and no specific electrical marker for fibrosis exists. In this study, a tissue-engineered model of cochlear fibrosis is developed following implant placement to examine the electrical characteristics associated with fibrotic tissue formation around electrodes. The model is characterized using electrochemical impedance spectroscopy and an increase in the resistance and a decrease in capacitance of the tissue using a representative circuit are found. This result informs a new marker of fibrosis progression over time that is extractable from voltage waveform responses, which can be directly measured in cochlear implant patients. This marker is tested in a small sample size of recently implanted cochlear implant patients, showing a significant increase over two postoperative timepoints. Using this system, complex impedance is demonstrated as a marker of fibrosis progression that is directly measurable from cochlear implants to enable real-time tracking of fibrosis formation in patients, creating opportunities for earlier treatment intervention to improve cochlear implant efficacy.
Asunto(s)
Implantación Coclear , Implantes Cocleares , Humanos , Impedancia Eléctrica , Cóclea/fisiología , Implantación Coclear/efectos adversos , FibrosisRESUMEN
Digestion is a fundamentally important process for an individual's life. However, the physical process of digestion is hidden inside the body, making it challenging to understand and a particularly difficult topic for students to learn in the classroom. Traditional approaches to teaching body processes include a mixture of textbook teaching and visual learning. However, digestion is not particularly visual. This activity is designed to engage students using a combination of visual, inquiry-based, and experiential learning approaches and introduces the scientific method to students in secondary school. The laboratory simulates digestion, creating a "stomach" inside of a clear vial. Students fill the vials with a protease solution and visually observe the digestion of food. By making predictions about the types of biomolecules that will be digested, students begin to learn and understand basic biochemistry in a relatable context, while simultaneously understanding anatomical and physiological concepts. We trialled this activity at two schools, where we received positive feedback from teachers and students, indicating that the practical enhanced student understanding of the digestion process. We see this lab as a valuable learning activity that can be extended broadly across multiple classrooms around the world.
RESUMEN
Bioelectronics hold the key for understanding and treating disease. However, achieving stable, long-term interfaces between electronics and the body remains a challenge. Implantation of a bioelectronic device typically initiates a foreign body response, which can limit long-term recording and stimulation efficacy. Techniques from regenerative medicine have shown a high propensity for promoting integration of implants with surrounding tissue, but these implants lack the capabilities for the sophisticated recording and actuation afforded by electronics. Combining these two fields can achieve the best of both worlds. Here, the construction of a hybrid implant system for creating long-term interfaces with tissue is shown. Implants are created by combining a microelectrode array with a bioresorbable and remodellable gel. These implants are shown to produce a minimal foreign body response when placed into musculature, allowing one to record long-term electromyographic signals with high spatial resolution. This device platform drives the possibility for a new generation of implantable electronics for long-term interfacing.
Asunto(s)
Electrónica , Cuerpos Extraños , Humanos , Prótesis e Implantes , Microelectrodos , Medicina RegenerativaRESUMEN
Addressing the mechanical mismatch between biological tissue and traditional electronic materials remains a major challenge in bioelectronics. While rigidity of such materials limits biocompatibility, supramolecular polymer networks can harmoniously interface with biological tissues as they are soft, wet, and stretchable. Here, an electrically conductive supramolecular polymer network that simultaneously exhibits both electronic and ionic conductivity while maintaining tissue-mimetic mechanical properties, providing an ideal electronic interface with the human body, is introduced. Rational design of an ultrahigh affinity host-guest ternary complex led to binding affinities (>1013 M-2 ) of over an order of magnitude greater than previous reports. Embedding these complexes as dynamic cross-links, coupled with in situ synthesis of a conducting polymer, resulted in electrically conductive supramolecular polymer networks with tissue-mimetic Young's moduli (<5 kPa), high stretchability (>500%), rapid self-recovery and high water content (>84%). Achieving such properties enabled fabrication of intrinsically-stretchable stand-alone bioelectrodes, capable of accurately monitoring electromyography signals, free from any rigid materials.
Asunto(s)
Electrónica , Polímeros , Humanos , Polímeros/química , Módulo de Elasticidad , Conductividad Eléctrica , Hidrogeles/químicaRESUMEN
3D cell models have made strides in the past decades in response to failures of 2D cultures to translate targets during the drug discovery process. Here, we report on a novel multiwell plate bioelectronic platform, namely, the e-transmembrane, capable of supporting and monitoring complex 3D cell architectures. Scaffolds made of PEDOT:PSS [poly(3,4-ethylenedioxythiophene):polystyrene sulfonate] are microengineered to function as separating membranes for compartmentalized cell cultures, as well as electronic components for real-time in situ recordings of cell growth and function. Owing to the high surface area-to-volume ratio, the e-transmembrane allows generation of deep, stratified tissues within the porous bulk and cell polarization at the apico-basal domains. Impedance spectroscopy measurements carried out throughout the tissue growth identified signatures from different cellular systems and allowed extraction of critical functional parameters. This platform has the potential to become a universal tool for biologists for the next generation of high-throughput drug screening assays.
RESUMEN
Bioelectronics have made strides in improving clinical diagnostics and precision medicine. The potential of bioelectronics for bidirectional interfacing with biology through continuous, label-free monitoring on one side and precise control of biological activity on the other has extended their application scope to in vitro systems. The advent of microfluidics and the considerable advances in reliability and complexity of in vitro models promise to eventually significantly reduce or replace animal studies, currently the gold standard in drug discovery and toxicology testing. Bioelectronics are anticipated to play a major role in this transition offering a much needed technology to push forward the drug discovery paradigm. Organic electronic materials, notably conjugated polymers, having demonstrated technological maturity in fields such as solar cells and light emitting diodes given their outstanding characteristics and versatility in processing, are the obvious route forward for bioelectronics due to their biomimetic nature, among other merits. This review highlights the advances in conjugated polymers for interfacing with biological tissue in vitro, aiming ultimately to develop next generation in vitro systems. We showcase in vitro interfacing across multiple length scales, involving biological models of varying complexity, from cell components to complex 3D cell cultures. The state of the art, the possibilities, and the challenges of conjugated polymers toward clinical translation of in vitro systems are also discussed throughout.
Asunto(s)
Electrónica , Polímeros , Animales , Reproducibilidad de los ResultadosRESUMEN
Articular cartilage is a collagen-rich tissue that provides a smooth, lubricated surface for joints and is also responsible for load bearing during movements. The major components of cartilage are water, collagen, and proteoglycans. Osteoarthritis is a degenerative disease of articular cartilage, in which an early-stage indicator is the loss of proteoglycans from the collagen matrix. In this study, confocal Raman microspectroscopy was applied to study the degradation of articular cartilage, specifically focused on spatially mapping the loss of glycosaminoglycans (GAGs). Trypsin digestion was used as a model for cartilage degradation. Two different scanning geometries for confocal Raman mapping, cross-sectional and depth scans, were applied. The chondroitin sulfate coefficient maps derived from Raman spectra provide spatial distributions similar to histological staining for glycosaminoglycans. The depth scans, during which subsurface data were collected without sectioning the samples, can also generate spectra and GAG distributions consistent with Raman scans of the surface-to-bone cross sections. In native tissue, both scanning geometries demonstrated higher GAG content at the deeper zone beneath the articular surface and negligible GAG content after trypsin degradation. On partially digested samples, both scanning geometries detected an â¼100 µm layer of GAG depletion. Overall, this research provides a technique with high spatial resolution (25 µm pixel size) to measure cartilage degradation without tissue sections using confocal Raman microspectroscopy, laying a foundation for potential in vivo measurements and osteoarthritis diagnosis.
RESUMEN
Recapitulating the collagen fiber structure of native menisci is one of the major challenges in the development of tissue-engineered menisci. Native collagen fibers are developed by the complex interplay of biochemical and biomechanical signals. In this study, we optimized glucose and transforming growth factor-ß1 (TGF-ß1) concentrations in combination with mechanical anchoring to balance contributions of proteoglycan synthesis and contractile behavior in collagen fiber assembly. Glucose had a profound effect on the final dimensions of collagen-based constructs. TGF-ß1 influenced construct contraction rate and glycosaminoglycan (GAG) production with two half-maximal effective concentration (EC50) ranges, which are 0.23 to 0.28 and 0.53 to 1.71 ng/mL, respectively. At concentrations less than the EC50, for the GAG production and contraction rate, TGF-ß1 treatment resulted in less organized collagen fibers. At concentrations greater than the EC50, TGF-ß1 led to dense, disorganized collagen fibers. Between the two EC50 values, collagen fiber diameter and length increased. The effects of TGF-ß1 on fiber development were enhanced by mechanical anchoring, leading to peaks in fiber diameter, length, and alignment index. Fiber diameter and length increased from 7.9 ± 1.4 and 148.7 ± 16.4 to 17.5 ± 2.1 and 262.0 ± 13.0 µm, respectively. The alignment index reached 1.31, comparable to that of native tissue, 1.40. These enhancements in fiber architecture resulted in significant increases in tensile modulus and ultimate tensile stress (UTS) by 1.6- and 1.4-fold. Correlation analysis showed that tensile modulus and UTS strongly correlated with collagen fiber length, diameter, and alignment, while compressive modulus correlated with GAG content. These outcomes highlight the need for optimization of both biochemical and biomechanical cues in the culture environment for enhancing fiber development within tissue-engineered constructs.
Asunto(s)
Menisco , Factor de Crecimiento Transformador beta1 , Colágeno , Glicosaminoglicanos , Ingeniería de TejidosRESUMEN
Achieving lateral integration of articular cartilage repair tissue with surrounding native cartilage remains a clinical challenge. Histological and bulk mechanical studies have identified extracellular matrix components that correlate with superior failure strength, but it is unclear how local changes in geometry and composition at the repair interface affect tissue strains under physiologic loading. Here, we investigated the effects of local compositional and interface geometry on lateral cartilage repair integration by coupling microscale Raman spectroscopy and confocal elastography to measure tissue strains under compressive and shear loading. Histological integration assessments did not have significant relationships with interface strains under compressive loading (p > 0.083) and only the perimeter attachment score was trending towards statistical significance with the |Exy| strain tensor under shear loading (p = 0.050). Interface slope had a stronger correlation with local tissue strains under compressive and shear loading compared to compositional measures of GAG, collagen, or proteins (compressive loading |Eyy| tensor: R2 = 0.400 (interface slope), 0.005 (GAG), 0.024 (collagen), and 0.012 (protein); shear loading |Exy| tensor: R2 = 0.457 (interface slope), 0.003 (GAG), 0.006 (collagen), and 0.000 (total protein)). These data support surgical publications detailing the need for vertical walls when debriding chondral defects. Current histological integration assessments and local compositional measures were insufficient for identifying the variation in interface strains under compressive and shear loading. Thus, our data points to the importance of controlling interface geometry at the time of surgery, which has implications for cartilage repair integration and long-term healing.
Asunto(s)
Cartílago Articular , Condrocitos , Colágeno , PresiónRESUMEN
Hollow organs and tissue systems drive various functions in the body. Many of these hollow or tubular systems, such as vasculature, the intestines, and the trachea, are common targets for tissue engineering, given their relevance to numerous diseases and body functions. As the field of tissue engineering has developed, numerous benchtop models have been produced as platforms for basic science and drug testing. Production of tubular scaffolds for different tissue engineering applications possesses many commonalities, such as the necessity for producing an intact tubular opening and for formation of semi-permeable epithelia or endothelia. As such, the field has converged on a series of manufacturing techniques for producing these structures. In this review, we discuss some of the most common tissue engineered applications within the context of tubular tissues and the methods by which these structures can be produced. We provide an overview of the general structure and anatomy for these tissue systems along with a series of general design criteria for tubular tissue engineering. We categorize methods for manufacturing tubular scaffolds as follows: casting, electrospinning, rolling, 3D printing, and decellularization. We discuss state-of-the-art models within the context of vascular, intestinal, and tracheal tissue engineering. Finally, we conclude with a discussion of the future for these fields.
RESUMEN
Interfaces between soft tissue and bone are characterized by transitional gradients in composition and structure that mediate substantial changes in mechanical properties. For interfacial tissue engineering, scaffolds with mineral gradients have shown promise in controlling osteogenic behavior of seeded bone marrow stromal cells (bMSCs). Previously, we have demonstrated a 'top-down' method for creating monolithic bone-derived scaffolds with patterned mineral distributions similar to native tissue. In the present work, we evaluated the ability of these scaffolds to pattern osteogenic behavior in bMSCs in basic, osteogenic, and chondrogenic biochemical environments. Immunohistochemical (IHC) and histological stains were used to characterize cellular behavior as a function of local mineral content. Alkaline phosphatase, an early marker of osteogenesis, and osteocalcin, a late marker of osteogenesis, were positively correlated with mineral content in basic, osteogenic, and chondrogenic media. The difference in bMSC behavior between the mineralized and demineralized regions was most pronounced in an basic biochemical environment. In the mineralized regions of the scaffold, osteogenic markers were clearly present as early as 4 days in culture. In osteogenic media, osteogenic behavior was observed across the entire scaffold, whereas in chondrogenic media, there was an overall reduction in osteogenic biomarkers. Overall, these results indicate local mineral content of the scaffold plays a key role in spatially patterning bMSC behavior. Our results can be utilized for the development of interfacial tissue engineered scaffolds and understanding the role of local environment in determining bMSC behavior. STATEMENT OF SIGNIFICANCE: Soft tissue-to-bone interfaces, such as tendon-bone, ligament-bone, and cartilage-bone, are ubiquitous in mammalian musculoskeletal systems. These interfacial tissues have distinct, hierarchically-structured gradients of cellular, biochemical, and materials components. Given the complexity of the biological structures, interfacial tissues present unique challenges for tissue engineering. Here, we demonstrate that material-derived cues can spatially pattern osteogenic behavior in bone marrow stromal cells (bMSCs). Specifically, we observed that when the bMSCs are cultured on bone-derived scaffolds with mineral gradients, cells in contact with higher mineral content display osteogenic behavior at earlier times than those on the unmineralized substrate. The ability to pattern the cellular complexity found in native interfaces while maintaining biologically relevant structures is a key step towards creating engineered tissue interfaces.
Asunto(s)
Células Madre Mesenquimatosas , Animales , Células de la Médula Ósea , Huesos , Diferenciación Celular , Células Cultivadas , Minerales , Osteogénesis , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Recently, the scientific community has shown considerable interest in engineering tissues with organized compositional and structural gradients to mimic hard-to-soft tissue interfaces. This effort is hindered by an incomplete understanding of the construction of native tissue interfaces. In this work, we combined Raman microscopy and confocal elastography to map compositional, structural, and mechanical features across the stiff-to-compliant interface of the attachments of the meniscus in the knee. This study provides new insight into the methods by which biology mediates multiple orders of magnitude changes in stiffness over tens of microns. We identified how the nano- to mesoscale architecture mediates complex microscale transitional regions across the interface: two regions defined by chemical composition, five distinguished by structural features, and three mechanically distinct regions. We identified three major components that lead to a robust interface between a soft tissue and bone: mobile collagen fiber units, a continuous interfacial region, and a local stiffness gradient. This tissue architecture allows for large displacements of collagen fibers in the attachments, enabling meniscal movement without localizing strains to the soft tissue-to-bone interface. The interplay of these regions reveals a method relying on hierarchical structuring across multiple length scales to minimize stress concentrators between highly dissimilar materials. These insights inspire new design strategies for synthetic soft tissue-to-bone attachments and biomimetic material interfaces.
Asunto(s)
Materiales Biomiméticos/uso terapéutico , Articulación de la Rodilla/fisiología , Menisco/fisiología , Tendones/fisiología , Huesos/fisiología , Matriz Extracelular/fisiología , Humanos , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Materials engineering can generally be divided into "bottom-up" and "top-down" approaches, where current state-of-the-art methodologies are bottom-up, relying on the advent of atomic-scale technologies. Applying bottom-up approaches to biological tissues is challenging due to the inherent complexity of these systems. Top-down methodologies provide many advantages over bottom-up approaches for biological tissues, given that some of the complexity is already built into the system. Here, we generate interfacial scaffolds by the spatially controlled removal of mineral content from trabecular bone using a chelating solution. We controlled the degree and location of the mineral interface, producing scaffolds that support cell growth, while maintaining the hierarchical structure of these tissues. We characterized the structural and compositional gradients across the scaffold using X-ray diffraction, microcomputed tomography (µCT), and Raman microscopy, revealing the presence of mineral gradients on the scale of 20 - 40 µm. Using these data, we generated a model showing the dependence of mineral removal as function of time in the chelating solution and initial bone morphology, specifically trabecular density. These scaffolds will be useful for interfacial tissue engineering, with application in the fields of orthopedics, developmental biology, and cancer metastasis to bone.
RESUMEN
Elementary and middle school science curriculums typically focus on generating an interest in science and engineering through the use of hands-on activities that demonstrate specific concepts. Laboratory activities designed in this manner often circumvent some of the main challenges that engineers and scientists face, namely balancing advantages and disadvantages for a variety of potential solutions to solve a specific problem. This activity was designed to show students that different solutions for a given problem can exist, and engineers must manage priorities when choosing the best solution. This laboratory involves cold casting ceramics slurries with varying viscosities into a mold. The resulting casts have a varying final density, controlled by the initial viscosity. Students are presented with different outcome measures regarding the objects they cast: ease of manufacturing, cost, aesthetics, and mechanical properties. Based on the laboratory design, no single cast will perform the best in any of these categories. The students are then asked to choose the best mold, and justify their answers based on the initial problem presented to them by balancing which outcome measures they consider to be important for solving this specific problem. This laboratory teaches basic science concepts like viscosity and density, while addressing common industrial manufacturing issues, such as cost and ease of manufacturing. Through a combination of these features, this laboratory introduces engineering and design concepts using the scientific method to students at an earlier age.
RESUMEN
Tissue-engineered menisci hold promise as an alternative to allograft procedures but require a means of robust fixation to the native bone. The insertion of the meniscus into bone is critical for meniscal function and inclusion of a soft tissue-to-bone interface in a tissue engineered implant can aid in the fixation process. The native insertion is characterized by gradients in composition, tissue architecture, and cellular phenotype, which are all difficult to replicate. In this study, a soft tissue-to-bone interface is tissue engineered with a cellular gradient of fibrochondrocytes and mesenchymal stem cells and subjected to a biochemical gradient through a custom media diffusion bioreactor. These constructs, consisting of interpenetrating collagen and boney regions, display improved mechanical performance and collagen organization compared to controls without a cellular or chemical gradient. Media gradient exposure produces morphological features in the constructs that appear similar to the native tissue. Collectively, these data show that cellular and biochemical gradients improve integration between collagen and bone in a tissue engineered soft tissue-to-bone construct.
Asunto(s)
Huesos/fisiología , Menisco/fisiología , Ingeniería de Tejidos , Animales , Bovinos , Colágeno/química , Colágeno Tipo I/metabolismo , Colágeno Tipo II/metabolismo , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Ratas , Resistencia a la Tracción , Andamios del Tejido/químicaRESUMEN
Soft tissue-to-bone interfaces are complex structures that consist of gradients of extracellular matrix materials, cell phenotypes, and biochemical signals. These interfaces, called entheses for ligaments, tendons, and the meniscus, are crucial to joint function, transferring mechanical loads and stabilizing orthopedic joints. When injuries occur to connected soft tissue, the enthesis must be re-established to restore function, but due to structural complexity, repair has proven challenging. Tissue engineering offers a promising solution for regenerating these tissues. This prospective review discusses methodologies for tissue engineering the enthesis, outlined in three key design inputs: materials processing methods, cellular contributions, and biochemical factors.