Tandem Protocol for Diversified Deuteration of Secondary Aliphatic Amines under Mild Conditions.

Deuteration of amine compounds has been widely of concern because of its practical role in organic reaction mechanisms and drug research; however, only limited deuteration label methods are accessible with D2O as a deuterium source. Herein, we propose a convenient deuteration protocol, including preparing D2 by the AlGa activation method, using PtRu nanowires as catalysts, and utilizing the elementary step in the couple reaction involving an imine unit, to realize the rapid preparation of a secondary amine with a diversified deuteration label. The self-coupling between nitriles not only provides a symmetric secondary amine with four α-D atoms but also produces high-valued ND3 in an atomic-economic way.

Photodimerization-Triggered Photopolymerization of Triene Coordination Polymers Enables Macroscopic Photomechanical Movements.

Controlling the packing of olefinic molecules in crystals is essential for triggering solid-state [2 + 2] photocycloaddition reactions and the synthesis of photocontrolled smart materials. Herein, we report the stepwise photodimerization-triggered photopolymerization of two triene coordination polymers (CPs), {[Zn(2-BBA)2(tpeb)]·0.5CH3CN}n (1, 2-HBBA = 2-bromobenzoic acid, tpeb = 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene) and {[Zn(3-BBA)2(tpeb)]·CH3CN)}n (2, 3-HBBA = 3-bromobenzoic acid). Upon irradiation with 420 nm light, each pair of closely packed and parallel olefinic bonds in 1 undergoes a [2 + 2] cycloaddition reaction, which connects two adjacent Z-shaped chains into a ladder-like coordination chain [Zn(2-BBA)2(bpbdpvpcb)0.5]n (1a, bpbdpvpcb = 1,3-bis(4-pyridyl)-2,4-bis(3,5-di(2-(4-pyridyl)vinyl)phenyl]cyclobutene) through single-crystal to single-crystal (SCSC) transformation. After photodimerization from 1 to 1a has occurred, the olefinic bonds that were initially distant are brought in close enough proximity to meet the requirements for a subsequent [2 + 2] cycloaddition reaction. Upon further light irradiation, the neighboring bpbdpvpcb ligands in 1a experience a SCSC photopolymerization based on [2 + 2] photocycloaddition and transform into poly-3b,4,5,5a,8b,9,10a-octahydro-4,5,9,10-tetrapyridyl-2,7-di(2-(4-pyridyl)vinyl)dicyclobuta[e,l]-pyren (poly-otpdpvdcbp). 2 showed similar structural changes under UV light illumination. Under light exposure, single crystals of 1 and 2 with different morphologies exhibit bending, cracking, and jumping photomechanical motions. The composite film (1-PVA) engineered by dispersing crystalline particles of 1 in poly(vinyl alcohol) (PVA) displays interesting light-wavelength-dependent photomechanical motions and can perform photodriven swimming on a liquid surface. This work provides a useful and promising approach to enable photodimerization of those photoinactive olefin pairs embedded in CPs and opens a new route to synthesize organic polymers by using olefinic CP platforms.

Liquid Gallium-Assisted Pyrolysis of MOF Affording CNT Non-Hollow Frameworks in High Yields for High-Performance Sodium-Ion Battery Anode.

Carbon materials have great potential for applications in energy, biology, and environment due to their excellent chemical and physical properties. Their preparation by carbonization methods encounters limitations and the carbon loss during pyrolysis in the form of gaseous molecules results in low yield of carbon materials. Herein a low-energy (600 °C) and high-yield (82 wt.%) carbonization strategy is developed using liquid gallium-assisted pyrolysis of metal-organic frameworks (MOFs) affording the N-doped carbon nanotube (CNT) non-hollow frameworks encapsulating Co nanoparticles. The liquid gallium layer offers protection against air, promotes heat transfer, and limits the escape of small carbonaceous gaseous molecules, which greatly improve the yields of the pyrolysis reaction. Experimental and theoretical results reveal that the synergistic interaction between CNTs and N/O-containing groups gives a non-hollow framework composed of N/O-enriched and open CNTs (NOCNTF-15, 15 denotes the 15 mm thickness of the liquid gallium layer during the pyrolysis) with high specific capacity (185 mAh g-1 at 10 A g-1) and ultra-stable cyclability (stable operation at 10 A g-1 and 50 °C for 20 000 cycles). This study provides a unique approach to carbonization that facilitates the practical application of low-cost CNTs and other MOFs-derived carbon materials in high-performance sodium-ion batteries (SIBs).

Zwitterionic Thiolate-Protected Ag22(0/I) and Ag20(I) Clusters: Assembly, Structural Characterization, and Antibacterial Activity.

Zwitterionic thiolate ligands have the potential to introduce novel assembly modes and functions for noble metal clusters. However, their utilization in the synthesis of silver clusters remains understudied, particularly for the clusters containing reductive Ag(0) species. In this article, we report the first synthesis of a mixed-valence silver(0/I) cluster protected by zwitterionic Tab as thiolate ligands (Tab = 4-(trimethylammonio)benzenethiolate), denoted as [Ag22(Tab)24](PF6)20·16CH3OH·6Et2O (Ag22·16CH3OH·6Et2O), alongside an Ag(I) cluster [Ag20(Tab)12(PhCOO)10(MeCN)2(H2O)](PF6)10·11MeCN (Ag20·11MeCN). Ag22 has a distinct hierarchical supratetrahedral structure with a central {Ag6} kernel surrounded by four [Ag4(Tab)6]4+ units. High-resolution electrospray ionization mass spectra demonstrate that Ag22 has two free electrons, indicating a superatomic core. Ag20 has a drum-like [Ag12(Tab)6(PhCOO)6(H2O)]6+ inner core capped by two tetrahedral-like [Ag4(Tab)3(PhCOO)2(MeCN)]2+ units. Ag20 can be transformed into Ag22 after its reaction with NaBH4 in solution. Antibacterial measurements reveal that Ag22 has a significantly lower minimum inhibitory concentration than that of the Ag20 cluster. This work not only extends the stabilization of silver(0/I) clusters to neutral thiol ligands but also offers new materials for the development of novel antibacterial materials.

New Pyridine Dicarbene Pincer Ligands with Ring Expanded NHCs and their Nickel and Chromium Complexes.

The pincer complexes [NiIIBr(CNC)]Br (4), [CrIIIBr3(CNC)] (5 a) and [CrIIIBr2.3Cl0.7(CNC)] (5 b), where CNC=3,3'-(pyridine-2,6-diyl)bis(1-mesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene), were obtained from the novel ligand CNC, generated in situ from the precursor (CHNCH)Br2 and [NiIIBr2(PPh3)2] or from [CrII{N(SiMe3)2}2(THF)2] and (CHNCH)Br2 by aminolysis, respectively. The tetrahedrally distorted square planar (τ4≅0.30) geometry and the singlet ground state of Ni in 4 were attributed to steric constraints of the CNC backbone. Computational methods highlighted the dependence of the coordination geometry and the singlet-triplet energy difference on the size of the N-substituent of the tetrahydropyrimidine wingtips and contrasted it to the situation in 5-membered imidazolin-2-ylidene pincer analogues. The octahedral CrIII metal center in 5 a and 5 b is presumably formed after one electron oxidation from CH2Cl2. 4/MAO and 5 a/MAO were catalysts of moderate activity for the oligomerization and polymerization of ethylene, respectively. The analogous (CH^N^CH)Br2 precursor, where (CH^N^CH)=3,3'-(pyridine-2,6-diylbis(methylene))bis(1-mesityl-3,4,5,6-tetrahydropyrimidin-1-ium), was also prepared, however its coordination chemistry was not studied due to the inherent instability of the resulting free C^N^C ligand.

Construction of olefinic coordination polymer single crystal platforms: precise organic synthesis, in situ exploration of reaction mechanisms and beyond.

Olefin [2+2] photocycloaddition reactions based on coordination-bond templates provide numerous advantages for the selective synthesis of cyclobutane compounds. This review outlines the recent advances in the design and construction of single crystal platforms of olefinic coordination polymers for precise organic synthesis, in situ exploration of reaction mechanisms, and possible developments as comprehensively as possible. Numerous examples are presented to illustrate how the arrangements of the olefin pairs influence the solid-state photoreactivity and examine the types of cyclobutane products. Furthermore, the photocycloaddition reaction mechanisms are investigated by combining advanced techniques such as single crystal X-ray diffraction, powder X-ray diffraction, nuclear magnetic resonance, infrared spectroscopy, fluorescence spectroscopy, laser scanning confocal microscopy and theoretical calculations. Finally, potential applications resulting from promising physicochemical properties before and after photoreactions are discussed, and existing challenges and possible solutions are also proposed.

Interfacial Electronic Interactions Between Ultrathin NiFe-MOF Nanosheets and Ir Nanoparticles Heterojunctions Leading to Efficient Overall Water Splitting.

Creating specific noble metal/metal-organic framework (MOF) heterojunction nanostructures represents an effective strategy to promote water electrolysis but remains rather challenging. Herein, a heterojunction electrocatalyst is developed by growing Ir nanoparticles on ultrathin NiFe-MOF nanosheets supported by nickel foam (NF) via a readily accessible solvothermal approach and subsequent redox strategy. Because of the electronic interactions between Ir nanoparticles and NiFe-MOF nanosheets, the optimized Ir@NiFe-MOF/NF catalyst exhibits exceptional bifunctional performance for the hydrogen evolution reaction (HER) (η10 = 15 mV, η denotes the overpotential) and oxygen evolution reaction (OER) (η10 = 213 mV) in 1.0 m KOH solution, superior to commercial and recently reported electrocatalysts. Density functional theory calculations are used to further investigate the electronic interactions between Ir nanoparticles and NiFe-MOF nanosheets, shedding light on the mechanisms behind the enhanced HER and OER performance. This work details a promising approach for the design and development of efficient electrocatalysts for overall water splitting.

Self-Assembly of Cluster-Mediated 3D Catenanes with Size-Specific Recognition Behavior.

Although interlocked three-dimensional molecules display unique properties associated with their spatial structures, their synthesis and study of their host-guest properties remain challenging. We report the formation of a novel [2]catenane, [Et4N]@[(Tp*WS3Cu3Cl)2(cis-bpype)3]2(OTf)5 ([Et4N][1](OTf)5), by self-assembly of the cluster node [Tp*WS3Cu3Cl]+ and the organic linker (Z)-1,2-diphenyl-1,2-bis(4-(pyridin-4-yl)phenyl)ethene (cis-bpype). Single-crystal X-ray and NMR analyses established that [1]4+ is formed by the interpenetration of two cluster-organic cages. Unique cation-in-cation host-guest complexes were observed with this catenane. The crystalline, empty catenane was formed by taking advantage of the electrostatic repulsion-induced weak binding of the host. Encapsulation experiments also reveal that the empty catenane can adaptively encapsulate cations such as [Et4N]+ and [Pr4N]+ in the cross cavity but is unable to encapsulate [Bu4N]+ and [Me4N]+, although the size of the latter is compatible with that of the cavity. Theoretical calculations and volume analysis allow to unravel the ingenious role of catenane structures and the interplay between electrostatic repulsion and attractive noncovalent interactions for size-specific recognition behavior in host-guest systems involving species with similar electric charges.

In situ observation of a stepwise [2 + 2] photocycloaddition process using fluorescence spectroscopy.

Using highly sensitive and selective in situ techniques to investigate the dynamics of intermediates formation is key to better understand reaction mechanisms. However, investigating the early stages of solid-state reactions/transformations is still challenging. Here we introduce in situ fluorescence spectroscopy to observe the evolution of intermediates during a two-step [2 + 2] photocycloaddition process in a coordination polymer platform. The structural changes and kinetics of each step under ultraviolet light irradiation versus time are accompanied by the gradual increase-decrease of intensity and blue-shift of the fluorescence spectra from the crystals. Monitoring the fluorescence behavior using a laser scanning confocal microscope can directly visualize the inhomogeneity of the photocycloaddition reaction in a single crystal. Theoretical calculations allow us to rationalize the fluorescence behavior of these compounds. We provide a convenient strategy for visualizing the solid-state photocycloaddition dynamics using fluorescence spectroscopy and open an avenue for kinetic studies of a variety of fast reactions.

Gold complexes with remote-substituted amino N-heterocyclic carbenes.

The 4-RN-1,3-Ar2-imidazolium salt, R = iPr, tBu, Ar = Mes, Dipp, Mes = mesityl, Dipp = 2,6-bis-diisopropyl-phenyl was metalated by AuI at the C2-, C5- and 4-RN positions depending on the reactants and conditions employed; a rare direct rearrangement of a AuI aminide to an abnormal imidazol-5-ylidene AuI complex was also observed and based on a DFT study it may involve TfO- facilitated H+ transfer.

A Cut-to-Link Strategy for Cubane-Based Heterometallic Sulfide Clusters with Giant Third-Order Nonlinear Optical Response.

Although the synthesis of low-dimensional metal sulfides by assembling cluster-based units is expected to promote the development of optical materials and models of enzyme active centers such as dinitrogenase, it is faced with limited assembly methodology. Herein we present a cut-to-link strategy to generate high-nuclearity assemblies, inspired by the formation of a Z-type dimer of the W-S-Cu analogues of PN cluster through in situ release of active linkers. Four new compounds with structures based on the same {Tp*WS3Cu3} incomplete cubane-like units were obtained using varied combinations of mild reagents. Open-aperture Z-scan measurements demonstrated the highest-nuclearity complex has the largest nonlinear optical absorption coefficient among discrete cluster-based materials reported to date. This approach enables building high-nuclearity metal sulfide clusters through cluster-based building blocks and opens a way to the design and exploration of materials based on well-identified building blocks.

Photopolymerization-Driven Macroscopic Mechanical Motions of a Composite Film Containing a Vinyl Coordination Polymer.

We report a unique vinyl coordination polymer (CP), [Zn(4-Fb)2 (tkpvb)]n (1, 4-HFb=4-fluorobenzoic acid, tkpvb=1,2,4,5-tetrakis(4-pyridylvinyl)benzene) that undergoes a rare photopolymerization reaction to form a two-dimensional CP integrated with a one-dimensional linear organic polymer. Upon light irradiation at different wavelengths, 1 exhibits an unprecedented phenomenon of photoinduced nonlinear lattice expansion. 1 can be uniformly dispersed in polyvinyl alcohol (PVA) to form the composite film of 1-PVA. When this film is exposed to UV light, internal minute stresses within crystallites are released by lattice expansion, resulting in a variety of photopolymerization-driven macroscopic mechanical motions. The findings provide new insights into the conversion of small lattice expansions of CPs into macroscopic mechanical motions based on photopolymerization reactions, which can promote the development of CPs-based smart photoactuators in the burgeoning field of microrobotics.

Carbonylmetallates as Versatile 2-, 4- or 6-Electron Donor Metalloligands in Transition-Metal Complexes and Clusters: A Global Approach.

Carbonylmetallates [m]- , such as [MoCp(CO)3 ]- , [Mn(CO)5 ]- , [Co(CO)4 ]- , have long been successfully used in the preparation of hundreds of metal-metal bonded carbonyl complexes and clusters, in particular of the heterometallic type. We focus here on situations where [m]- can be viewed as a terminal, doubly or even triply bridging metalloligand, developing metal-metal interactions with one, two or three metal centers M, respectively. With metals M from the Groups 10-12, it is not straightforward or even impossible to rationalize the structure of the resulting clusters by applying the well-known Wade-Mingos rules. A very simple but global approach is presented to rationalize structures not obeying usual electron-counting rules by considering the anionic building blocks [m]- as metalloligands behaving formally as potential 2-, 4- or 6-electron donors, similarly to what is typically encountered with for example halido ligands. Qualitative and theoretical arguments by using DFT calculations highlight similarities between seemingly unrelated metal complexes and clusters and also entail a predicting power with high synthetic potential.

Dual-ligand and hard-soft-acid-base strategies to optimize metal-organic framework nanocrystals for stable electrochemical cycling performance.

Most metal-organic frameworks (MOFs) hardly maintain their physical and chemical properties after exposure to acidic, neutral, or alkaline aqueous solutions, resulting in insufficient stability, therefore limiting their applications. Thus, the design and synthesis of stable size/morphology-controlled MOF nanocrystals is critical but challenging. In this study, dual-ligand and hard-soft-acid-base strategies were used to fabricate a variety of 3D pillared-layer [Ni(thiophene-2,5-dicarboxylate)(4,4'-bipyridine)]n MOF nanocrystals (1D nanofibers, 2D nanosheets and 3D aggregates) with controllable morphology by varying the concentration of 4,4'-bipyridine and thus controlling the crystal growth direction. Owing to the shorter ion diffusion length, enhanced electron/ion transfer and strong interactions between thiophene-2,5-dicarboxylate and 4,4'-bipyridine, the 2D nanosheets showed much larger specific capacitance than 1D nanofibers and 3D aggregates. A single device with an output voltage as high as 3.0 V and exceptional cycling performance (95% of retention after 5000 cycles at 3 mA cm-2) was realized by configuring two aqueous asymmetric supercapacitive devices in series. The excellent cycling property and charge-discharge mechanism are consistent with the hard-soft-acid-base theory.

Surface deposition of 2D covalent organic frameworks for minimizing nanocatalyst sintering during hydrogenation.

A strategy of in situ depositing 2D COFs on heterogeneous catalysts was reported for the first time to suppress the agglomeration and sintering of the supported metal nanoparticles during hydrogenation processes. The COF-decorated nanocatalysts exhibited excellent stability in various hydrogenation reactions including the reduction of dimethyl oxalate (DMO), furfural, and other chemicals.

A cavity-shaped cis-chelating P,N ligand for highly selective nickel-catalysed ethylene dimerisation.

The presence of a permethylated α-cyclodextrin (α-CD) cavity in a chelating P,N ligand promotes exclusive formation of 1 : 1 ligand/metal complexes. In MX2 complexes, one of the two halido ligands is forced to reside inside the CD hollow while the second one is pointing outside. Unlike its cavity-free analogue, a Ni(II) complex of the CD ligand is a highly selective precatalyst for ethylene dimerisation (96% C4 selectivity with up to 95% of 1-butene within the C4 fraction).

Electrochemical activation-induced surface-reconstruction of NiOx microbelt superstructure of core-shell nanoparticles for superior durability electrocatalysis.

The tailoring of intrinsic electronic structures and extrinsic hierarchical morphologies is widely recognized as a promising strategy to enhance the oxygen evolution reaction (OER) performance of electrocatalysts. It is generally accepted that the surface of the transition metal-based electrocatalyst exposed to the alkaline electrolyte is highly oxidized and reconstructed, forming an amorphous layer during the electrochemical process. This amorphous active phase is favorable for OER due to its abundant dangling bonds, vacancies and defects, which is tricky to be rationally prepared by conventional methods. Herein, a facile access to crystalline / amorphous NiOx microbelt superstructure of core-shell nanoparticles is presented, which is assembled of crystalline NiO nanoparticles coated with amorphous Ni3+/Ni2+ oxide layer. Electrochemical activation induces the in-situ surface reconstruction of the NiOx microbelt superstructure, resulting in a thicker outer amorphous Ni3+/Ni2+ layer further facilitating OER. Owing to the optimization of the in-situ surface reconstruction, the NiOx microbelt superstructure with crystalline / amorphous dual phases exhibited both high electrocatalytic activity and superior durability for OER, with the original microbelt superstructure retained after 50000 s I-t test.

Controllable multiple-step configuration transformations in a thermal/photoinduced reaction.

Solid-state photochemical reactions of olefinic compounds have been demonstrated to represent powerful access to organic cyclic molecules with specific configurations. However, the precise control of the stereochemistry in these reactions remains challenging owing to complex and fleeting configuration transformations. Herein, we report a unique approach to control the regiospecific configurations of C = C groups and the intermediates by varying temperatures in multiple-step thermal/photoinduced reactions, thus successfully realizing reversible ring closing/opening changes using a single-crystal coordination polymer platform. All stereochemical transitions are observed by in situ single-crystal X-ray diffraction, powder X-ray diffraction and infrared spectroscopy. Density functional theory calculations allow us to rationalize the mechanism of the synergistic thermal/photoinduced transformations. This approach can be generalized to the analysis of the possible configuration transformations of functional groups and intermediates and unravel the detailed mechanism for any inorganic, organic and macromolecular reactions susceptible to incorporation into single-crystal coordination polymer platforms.

Experimental and Theoretical Study of NiII - and PdII -Promoted Double Geminal C(sp3 )-H Bond Activation Providing Facile Access to NHC Pincer Complexes: Isolated Intermediates and Mechanism.

We report the first examples of metal-promoted double geminal activation of C(sp3 )-H bonds of the N-CH2 -N moiety in an imidazole-type heterocycle, leading to nickel and palladium N-heterocyclic carbene complexes under mild conditions. Reaction of the new electron-rich diphosphine 1,3-bis((di-tert-butylphosphaneyl)methyl)-2,3-dihydro-1H-benzo[d]imidazole (1) with [PdCl2 (cod)] occurred in a stepwise fashion, first by single C-H bond activation yielding the alkyl pincer complex [PdCl(PC sp 3 H P)] (3) with two trans phosphane donors and a covalent Pd-C sp 3 bond. Activation of the C-H bond of the resulting α-methine C sp 3 H-M group occurred subsequently when 3 was treated with HCl to yield the NHC pincer complex [PdCl(PCNHC P)]Cl (2). Treatment of 1 with [NiBr2 (dme)] also afforded a NHC pincer complex, [NiBr(PCNHC P)]Br (6), but the reactions leading to the double geminal C-H bond activation of the N-CH2 -N group were too fast to allow identification or isolation of an intermediate analogous to 3. The determination of six crystal structures, the isolation of reaction intermediates and DFT calculations provided the basis for suggesting the mechanism of the stepwise transformation of a N-CH2 -N moiety in the N-CNHC -N unit of NHC pincer complexes and explain the key differences observed between the Pd and Ni chemistries.