Flash heating process for efficient meat preservation.

Maintaining food safety and quality is critical for public health and food security. Conventional food preservation methods, such as pasteurization and dehydration, often change the overall organoleptic quality of the food products. Herein, we demonstrate a method that affects only a thin surface layer of the food, using beef as a model. In this method, Joule heating is generated by applying high electric power to a carbon substrate in <1 s, which causes a transient increase of the substrate temperature to > ~2000 K. The beef surface in direct contact with the heating substrate is subjected to ultra-high temperature flash heating, leading to the formation of a microbe-inactivated, dehydrated layer of ~100 µm in thickness. Aerobic mesophilic bacteria, Enterobacteriaceae, yeast and mold on the treated samples are inactivated to a level below the detection limit and remained low during room temperature storage of 5 days. Meanwhile, the product quality, including visual appearance, texture, and nutrient level of the beef, remains mostly unchanged. In contrast, microorganisms grow rapidly on the untreated control samples, along with a rapid deterioration of the meat quality. This method might serve as a promising preservation technology for securing food safety and quality.

Highly stable, antiviral, antibacterial cotton textiles via molecular engineering.

Cotton textiles are ubiquitous in daily life and are also one of the primary mediums for transmitting viruses and bacteria. Conventional approaches to fabricating antiviral and antibacterial textiles generally load functional additives onto the surface of the fabric and/or their microfibres. However, such modifications are susceptible to deterioration after long-term use due to leaching of the additives. Here we show a different method to impregnate copper ions into the cellulose matrix to form a copper ion-textile (Cu-IT), in which the copper ions strongly coordinate with the oxygen-containing polar functional groups (for example, hydroxyl) of the cellulose chains. The Cu-IT displays high antiviral and antibacterial performance against tobacco mosaic virus and influenza A virus, and Escherichia coli, Salmonella typhimurium, Pseudomonas aeruginosa and Bacillus subtilis bacteria due to the antimicrobial properties of copper. Furthermore, the strong coordination bonding of copper ions with the hydroxyl functionalities endows the Cu-IT with excellent air/water retainability and superior mechanical stability, which can meet daily use and resist repeated washing. This method to fabricate Cu-IT is cost-effective, ecofriendly and highly scalable, and this textile appears very promising for use in household products, public facilities and medical settings.

A cellulose-derived supramolecule for fast ion transport.

Supramolecular frameworks have been widely synthesized for ion transport applications. However, conventional approaches of constructing ion transport pathways in supramolecular frameworks typically require complex processes and display poor scalability, high cost, and limited sustainability. Here, we report the scalable and cost-effective synthesis of an ion-conducting (e.g., Na+) cellulose-derived supramolecule (Na-CS) that features a three-dimensional, hierarchical, and crystalline structure composed of massively aligned, one-dimensional, and ångström-scale open channels. Using wood-based Na-CS as a model material, we achieve high ionic conductivities (e.g., 0.23 S/cm in 20 wt% NaOH at 25 °C) even with a highly dense microstructure, in stark contrast to conventional membranes that typically rely on large pores (e.g., submicrometers to a few micrometers) to obtain comparable ionic conductivities. This synthesis approach can be universally applied to a variety of cellulose materials beyond wood, including cotton textiles, fibers, paper, and ink, which suggests excellent potential for a number of applications such as ion-conductive membranes, ionic cables, and ionotronic devices.

A high-performance hydroxide exchange membrane enabled by Cu2+-crosslinked chitosan.

Ion exchange membranes are widely used to selectively transport ions in various electrochemical devices. Hydroxide exchange membranes (HEMs) are promising to couple with lower cost platinum-free electrocatalysts used in alkaline conditions, but are not stable enough in strong alkaline solutions. Herein, we present a Cu2+-crosslinked chitosan (chitosan-Cu) material as a stable and high-performance HEM. The Cu2+ ions are coordinated with the amino and hydroxyl groups of chitosan to crosslink the chitosan chains, forming hexagonal nanochannels (~1 nm in diameter) that can accommodate water diffusion and facilitate fast ion transport, with a high hydroxide conductivity of 67 mS cm-1 at room temperature. The Cu2+ coordination also enhances the mechanical strength of the membrane, reduces its permeability and, most importantly, improves its stability in alkaline solution (only 5% conductivity loss at 80 °C after 1,000 h). These advantages make chitosan-Cu an outstanding HEM, which we demonstrate in a direct methanol fuel cell that exhibits a high power density of 305 mW cm-2. The design principle of the chitosan-Cu HEM, in which ion transport channels are generated in the polymer through metal-crosslinking of polar functional groups, could inspire the synthesis of many ion exchange membranes for ion transport, ion sieving, ion filtration and more.

Efficient production of oligomeric chitin with narrow distributions of degree of polymerization using sonication-assisted phosphoric acid hydrolysis.

A method of producing oligomeric chitin using sonication-assisted phosphoric acid hydrolysis was introduced. The processing was continuous and scalable. Oligomeric chitin fractions with narrow distributions of degree of polymerization were obtained by differential precipitation using ethanol as precipitating agent at different ethanol-to-phosphoric-acid-solution volume ratios. The yield of oligomeric chitin with degree of polymerization between 4 and 10 was ≈30% (mass fraction). The content of each fraction was characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI TOF MS). Changes in chemical composition of oligomeric chitin were negligible, as verified by MALDI TOF MS, Fourier-transform infrared, and nuclear magnetic resonance spectroscopy. This new method for producing oligomeric chitin molecules is rapid, cost-effective, and safe.

Copper-coordinated cellulose ion conductors for solid-state batteries.

Although solid-state lithium (Li)-metal batteries promise both high energy density and safety, existing solid ion conductors fail to satisfy the rigorous requirements of battery operations. Inorganic ion conductors allow fast ion transport, but their rigid and brittle nature prevents good interfacial contact with electrodes. Conversely, polymer ion conductors that are Li-metal-stable usually provide better interfacial compatibility and mechanical tolerance, but typically suffer from inferior ionic conductivity owing to the coupling of the ion transport with the motion of the polymer chains1-3. Here we report a general strategy for achieving high-performance solid polymer ion conductors by engineering of molecular channels. Through the coordination of copper ions (Cu2+) with one-dimensional cellulose nanofibrils, we show that the opening of molecular channels within the normally ion-insulating cellulose enables rapid transport of Li+ ions along the polymer chains. In addition to high Li+ conductivity (1.5 × 10-3 siemens per centimetre at room temperature along the molecular chain direction), the Cu2+-coordinated cellulose ion conductor also exhibits a high transference number (0.78, compared with 0.2-0.5 in other polymers2) and a wide window of electrochemical stability (0-4.5 volts) that can accommodate both the Li-metal anode and high-voltage cathodes. This one-dimensional ion conductor also allows ion percolation in thick LiFePO4 solid-state cathodes for application in batteries with a high energy density. Furthermore, we have verified the universality of this molecular-channel engineering approach with other polymers and cations, achieving similarly high conductivities, with implications that could go beyond safe, high-performance solid-state batteries.

Solvent-Assisted Fractionation of Oligomeric Cellulose and Reversible Transformation of Cellulose II and IV.

Oligomeric cellulose with an average degree of polymerization of 7.68 and a polydispersity of 1.04 has been fractionated using solution processes. Three fractions have been obtained through initial dissolution, subsequent crystallization, and solvent precipitation, respectively. The resulting oligocellulose fraction has an average degree of polymerization of 7.70 and a polydispersity of 1.01, respectively. Cellulose IV2 crystals form in the oligocellulose fraction, and reversibly transform to II and back to IV using simple solvents.

Effect of Carbon Chain Length, Ionic Strength, and pH on the In Vitro Release Kinetics of Cationic Drugs from Fatty-Acid-Loaded Contact Lenses.

This paper explores the use of fatty acids in silicone hydrogel contact lenses for extending the release duration of cationic drugs. Drug release kinetics was dependent on the carbon chain length of the fatty acid loaded in the lens, with 12-, 14- and 18-carbon chain length fatty acids increasing the uptake and the release duration of ketotifen fumarate (KTF) and tetracaine hydrochloride (THCL). Drug release kinetics from oleic acid-loaded lenses was evaluated in phosphate buffer saline (PBS) at different ionic strengths (I = 167, 500, 1665 mM); the release duration of KTF and THCL was decreased with increasing ionic strength of the release medium. Furthermore, the release of KTF and THCL in deionized water did not show a burst and was significantly slower compared to that in PBS. The release kinetics of KTF and THCL was significantly faster when the pH of the release medium was decreased from 7.4 towards 5.5 because of the decrease in the relative amounts of oleate anions in the lens mostly populated at the polymer-pore interfaces. The use of boundary charges at the polymer-pore interfaces of a contact lens to enhance drug partition and extend its release is further confirmed by loading cationic phytosphingosine in contact lenses to attract an anionic drug.

Extended delivery of cationic drugs from contact lenses loaded with unsaturated fatty acids.

This paper describes the use of surface-active anionic unsaturated fatty acids in commercial contact lenses to extend drug release duration and regulate delivery dosage. We studied the effect of oleic acid on the in vitro release kinetics of three cationic drugs, and two anionic drugs from silicone hydrogel contact lenses. The release duration of the cationic drugs: tetracaine hydrochloride, bupivacaine hydrochloride, and ketotifen fumarate was significantly extended from less than a day to more than a month because of the presence of oleic acid in the contact lenses. With a simple change in the fatty acid loading media, we could duplicate a similar efficacy by loading oleic acid in conventional non-silicone hydrogel contact lenses. The fitted effective diffusivity values of the three cationic drugs significantly decrease when the oleic acid weight % in the lenses is increased. By using two other unsaturated fatty acids, linoleic and α-linolenic acid, the release duration of ketotifen fumarate was also significantly extended in silicone hydrogel contact lenses. In contrast, the release of two anionic drugs, diclofenac sodium and flurbiprofen sodium, was accelerated for oleic acid modified lenses. These results show the dominating impact of coupling charge interactions between the drug and the fatty acid carrier molecules to precisely adjust delivery rate and dosage from a contact lens.

Decoupling Ionic and Electronic Pathways in Low-Dimensional Hybrid Conductors.

The construction of two-dimensional (2D) layered compounds for nanofluidic ion transport has recently attracted increasing interest due to the facile fabrication, tunable channel size, and high flux of these materials. Here we design a nacre-mimetic graphite-based nanofluidic structure in which the nanometer-thick graphite flakes are wrapped by negatively charged nanofibrillated cellulose (NFC) fibers to form multiple 2D confined spacings as nanochannels for rapid cation transport. At the same time, the graphite-NFC structure exhibits an ultralow electrical conductivity (σe ≤ 10-9 S/cm), even when the graphite concentration is up to 50 wt %, well above the percolation threshold (∼1 wt %). By tuning the hydration degree of graphite-NFC composites, the surface-charge-governed ion transport in the confined ∼1 nm spacings exhibits nearly 12 times higher ionic conductivity (1 × 10-3 S/cm) than that of a fully swollen structure (∼1.5 nm, 8.5 × 10-5 S/cm) at salt concentrations up to 0.1 M. The resulting charge selective conductor shows intriguing features of both high ionic conductivity and low electrical conductivity. Moreover, the inherent stability of the graphite and NFC components contributes to the strong functionality of the nanofluidic ion conductors in both acidic and basic environments. Our work demonstrates this 1D-2D material hybrid system as a suitable platform to study nanofluidic ion transport and provides a promising strategy to decouple ionic and electronic pathways, which is attractive for applications in new nanofluidic device designs.

Formation of Drug-Participating Catanionic Aggregates for Extended Delivery of Non-Steroidal Anti-Inflammatory Drugs from Contact Lenses.

This paper focuses on extending drug release duration from contact lenses by incorporating catanionic aggregates. The aggregates consist of a long-chain cationic surfactant, i.e., cetalkonium chloride (CKC), and an oppositely charged anti-inflammatory amphiphilic drug. We studied three non-steroidal anti-inflammatory (NSAID) drugs with different octanol-water partition coefficients; diclofenac sodium (DFNa), flurbiprofen sodium (FBNa), and naproxen sodium (NPNa). Confirmation of catanionic aggregate formation in solution was determined by steady and dynamic shear rheology measurements. We observed the increased viscosity, shear thinning, and viscoelastic behavior characteristic of wormlike micelles; the rheological data are reasonably well described using a Maxwellian fluid model with a single relaxation time. In vitro release experiments demonstrated that the extension in the drug release time is dependent on the ability of a drug to form viscoelastic catanionic aggregates. Such aggregates retard the diffusive transport of drug molecules from the contact lenses. Our study revealed that the release kinetics depends on the CKC concentration and the alkyl chain length of the cationic surfactant. We demonstrated that more hydrophobic drugs such as diclofenac sodium show a more extended release than less hydrophobic drugs such as naproxen sodium.

Molecular partitioning in ternary solutions of cellulose.

Neutron scattering measurements on the structure and dynamics of ternary solutions of microcrystalline cellulose (MC) in mixtures of an ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate and a polar organic solvent dimethylformamide (DMF) have shown that MC can be fully dissolved in solvent mixtures. Data also show the molecular partitioning of IL into coexisting states. The structure partitioning is manifested as IL adsorbed to cellulose molecules with additional IL self-assembled to form clusters in solution, while the dynamics partitioning shows dynamical heterogeneities of the IL with slow dynamics resembling neat IL and fast dynamics being coupled with the solvent. The composition dependence of the molecular partitioning results in a solubility gap in dilute cellulose solutions and a phase boundary criterion of the molar ratio of IL / MC ∼ 3 in more concentrated regimes. The two characteristics together define the main features of the dissolution phase diagram of ternary cellulose mixtures of MC / IL / DMF at the room temperature.

Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting.

Converting low-grade heat into useful electricity requires a technology that is efficient and cost effective. Here, we demonstrate a cellulosic membrane that relies on sub-nanoscale confinement of ions in oxidized and aligned cellulose molecular chains to enhance selective diffusion under a thermal gradient. After infiltrating electrolyte into the cellulosic membrane and applying an axial temperature gradient, the ionic conductor exhibits a thermal gradient ratio (analogous to the Seebeck coefficient in thermoelectrics) of 24 mV K-1-more than twice the highest value reported until now. We attribute the enhanced thermally generated voltage to effective sodium ion insertion into the charged molecular chains of the cellulosic membrane, which consists of type II cellulose, while this process does not occur in natural wood or type I cellulose. With this material, we demonstrate a flexible and biocompatible heat-to-electricity conversion device via nanoscale engineering based on sustainable materials that can enable large-scale manufacture.

A nanofluidic ion regulation membrane with aligned cellulose nanofibers.

The advancement of nanofluidic applications will require the identification of materials with high-conductivity nanoscale channels that can be readily obtained at massive scale. Inspired by the transpiration in mesostructured trees, we report a nanofluidic membrane consisting of densely packed cellulose nanofibers directly derived from wood. Numerous nanochannels are produced among an expansive array of one-dimensional cellulose nanofibers. The abundant functional groups of cellulose enable facile tuning of the surface charge density via chemical modification. The nanofiber-nanofiber spacing can also be tuned from ~2 to ~20 nm by structural engineering. The surface-charge-governed ionic transport region shows a high ionic conductivity plateau of ~2 mS cm-1 (up to 10 mM). The nanofluidic membrane also exhibits excellent mechanical flexibility, demonstrating stable performance even when the membrane is folded 150°. Combining the inherent advantages of cellulose, this novel class of membrane offers an environmentally responsible strategy for flexible and printable nanofluidic applications.

Phase Separation and Stack Alignment in Aqueous Cellulose Nanocrystal Suspension under Weak Magnetic Field.

Isotropic-nematic (I-N) transitions in cellulose nanocrystal (CNC) suspension and self-assembled structures in the isotropic and nematic phases were investigated using scattering and microscopy methods. A CNC suspension with a mass fraction of 7.4% spontaneously phase separated into an isotropic phase of 6.9% in the top layer and a nematic phase of 7.9% in the bottom layer. In both the phases, the CNC particles formed stacks with an interparticle distance being of ≈37 nm. One-dimensional small-angle neutron scattering (SANS) profiles due to both phases could be fitted using a stacking model considering finite particle sizes. SANS and atomic force microscopy studies indicate that the nematic phase in the bottom layer contains more populations of larger particles. A weak magnetic field of ≈0.5 T was able to induce a preferred orientation of CNC stacks in the nematic phase, with the stack normals being aligned with the field (perpendicular to the long axis of CNC particles). The Hermans orientation parameter, ⟨ P2⟩, was ≈0.5 for the nematic phase; it remained unchanged during the relaxation process of ≈10 h. The fraction of oriented CNC populations decreased during the relaxation; dramatic decrease occurred in the first 3 h. The top layer remained isotropic in the weak field. Polarized microscopy studies revealed that the nematic phase was chiral. Adjacent particles in a stack form a twisting angle of ≈0.6 °, resulting in a helix pitch distance of ≈22 µm.

Spray-Processed Composites with High Conductivity and Elasticity.

Highly conductive elastic composites were constructed using multistep solution-based fabrication methods that included the deposition of a nonwoven polymer fiber mat through solution blow spinning and nanoparticle nucleation. High nanoparticle loading was achieved by introducing silver nanoparticles into the fiber spinning solution. The presence of the silver nanoparticles facilitates improved uptake of silver nanoparticle precursor in subsequent processing steps. The precursor is used to generate a second nanoparticle population, leading to high loading and conductivity. Establishing high nanoparticle loading in a microfibrous block copolymer network generated deformable composites that can sustain electrical conductivities reaching 9000 S/cm under 100% tensile strain. These conductive elastic fabrics can retain at least 70% of their initial electrical conductivity after being stretched to 100% strain and released for 500 cycles. This composite material system has the potential to be implemented in wearable electronics and robotic systems.

Neutron scattering in the biological sciences: progress and prospects.

The scattering of neutrons can be used to provide information on the structure and dynamics of biological systems on multiple length and time scales. Pursuant to a National Science Foundation-funded workshop in February 2018, recent developments in this field are reviewed here, as well as future prospects that can be expected given recent advances in sources, instrumentation and computational power and methods. Crystallography, solution scattering, dynamics, membranes, labeling and imaging are examined. For the extraction of maximum information, the incorporation of judicious specific deuterium labeling, the integration of several types of experiment, and interpretation using high-performance computer simulation models are often found to be particularly powerful.

Entropic stabilization of folded RNA in crowded solutions measured by SAXS.

Non-coding RNAs must fold into specific structures that are stabilized by metal ions and other co-solutes in the cell's interior. Large crowder molecules such as PEG stabilize a bacterial group I ribozyme so that the RNA folds in low Mg2+ concentrations typical of the cell's interior. To understand the thermodynamic origins of stabilization by crowder molecules, small angle X-ray scattering was used to measure the folding and helix assembly of a bacterial group I ribozyme at different temperatures and in different MgCl2 and polyethylene glycol (PEG) concentrations. The resulting phase diagrams show that perturbations to folding by each variable do not overlap. A favorable enthalpy change drives the formation of compact, native-like structures, but requires Mg2+ ions at all temperatures studied (5-55°C). PEG reduces the entropic cost of helix assembly and increases correlations between RNA segments at all temperatures. The phase diagrams also revealed a semi-compact intermediate between the unfolded and folded ensemble that is locally more flexible than the unfolded state, as judged by SHAPE modification. These results suggest that environmental variables such as temperature and solute density will favor different types of RNA structures.

Molecular crowding overcomes the destabilizing effects of mutations in a bacterial ribozyme.

The native structure of the Azoarcus group I ribozyme is stabilized by the cooperative formation of tertiary interactions between double helical domains. Thus, even single mutations that break this network of tertiary interactions reduce ribozyme activity in physiological Mg(2+) concentrations. Here, we report that molecular crowding comparable to that in the cell compensates for destabilizing mutations in the Azoarcus ribozyme. Small angle X-ray scattering, native polyacrylamide gel electrophoresis and activity assays were used to compare folding free energies in dilute and crowded solutions containing 18% PEG1000. Crowder molecules allowed the wild-type and mutant ribozymes to fold at similarly low Mg(2+) concentrations and stabilized the active structure of the mutant ribozymes under physiological conditions. This compensation helps explains why ribozyme mutations are often less deleterious in the cell than in the test tube. Nevertheless, crowding did not rescue the high fraction of folded but less active structures formed by double and triple mutants. We conclude that crowding broadens the fitness landscape by stabilizing compact RNA structures without improving the specificity of self-assembly.

NMR Water Self-Diffusion and Relaxation Studies on Sodium Polyacrylate Solutions and Gels in Physiologic Ionic Solutions.

Water self-diffusion coefficients and longitudinal relaxation rates in sodium polyacrylate solutions and gels were measured by NMR, as a function of polymer content and structure in a physiological concentration range of monovalent and divalent cations, Ca2+ and Na+. Several physical models describing the self-diffusion of the solvent were applied and compared. A free-volume model was found to be in good agreement with the experimental results over a wide range of polymer concentrations. The longitudinal relaxation rate exhibited linear dependence on polymer concentration below a critical concentration and showed non-linear behavior at higher concentrations. Both the water self-diffusion and relaxation were less influenced by the polymer in the gel state than in the uncrosslinked polymer solutions. The effect of Na+ on the mobility of water molecules was practically undetectable. By contrast, addition of Ca2+ strongly increased the longitudinal relaxation rate while its effect on the self-diffusion coefficient was much less pronounced.