RESUMEN
Hypothesis Atomistically-detailed models of surfactants provide quantitative information on the molecular interactions and spatial distributions at fluid interfaces. Hence, it should be possible to extract from this information, macroscopical thermophysical properties such as interfacial tension, critical micelle concentrations and the relationship between these properties and the bulk fluid surfactant concentrations. Simulations and Experiments Molecular-scale interfacial of systems containing n-dodecyl ß-glucoside (APG12) are simulated using classical molecular dynamics. The bulk phases and the corresponding interfacial regions are all explicitly detailed using an all-atom force field (PCFF+). During the simulation, the behaviour of the interface is analyzed geometrically to obtain an approximated value of the critical micelle concentration (CMC) in terms of the surfactant area number density and the interfacial tension is assessed through the analysis of the forces amongst molecules. New experimental determinations are reported for the surface tension of APG12 at the water/air and at the water/n-decane interfaces. Findings We showcase the application of a thermodynamic framework that inter-relates interfacial tensions, surface densities, CMCs and bulk surfactant concentrations, which allows the in silico quantitative prediction of interfacial tension isotherms.
RESUMEN
HYPOTHESIS: Amphiphilic diblock copolymers are known to increase the surfactant's efficiency to stabilize microemulsion, leading to higher structural order and monolayer rigidity. We thus seek to evaluate whether the addition of such polymers alters the shear behavior of bicontinuous microemulsions, in particular, their shear transformation towards lamellar structures. EXPERIMENTS: We examine the initial structure and shear response of bicontinuous /n-octane//PEP5-b-PEO5 microemulsions by coupling microfluidics with small-angle neutron scattering (SANS), attaining wall shear rates in excess of . The azimuthal analysis of the obtained 2D scattering patterns allows us to follow their structural transformation by means of the degree of anisotropy. FINDINGS: The amphiphilic diblock copolymer promotes the shear-induced transformation of bicontinuous microemulsions, resulting in up to â¼ higher degrees of anisotropy than for corresponding polymer-free microemulsions. The increased shear response observed with increasing polymer content is rationalized by combining the influence of domain size and viscosity with the stability limits of the bicontinuous microemulsion in the isothermal phase diagram. As a result, a consistent description of the degree of anisotropy is obtained, enabling the prediction of the shear-induced bicontinuous-to-lamellar transformation.
RESUMEN
HYPOTHESIS: The physical and mechanical properties of triacylglycerols (TAGs), or 'fats', depend on their composition and thermal history which, in turn, impact crystal structure and morphology. We examine whether thermal history can be mechanistically related to film removal by a surfactant solution. EXPERIMENTS: Model TAG mixtures, comprising triolein:tripalmitin:tristearin 0.5:0.3:0.2, were subjected to a range of cooling profiles from the melt (0.5-80°C/min, Newtonian and annealed), and the resulting solid films characterised by microscopy, X-ray diffraction, infrared spectroscopy, and contact angle measurements. Film removal from a model glass substrate by an aqueous surfactant solution of sodium dodecylsulphate and dodecyldimethylamine oxide at room temperature fixed at 25°C was examined under quiescent flow conditions. FINDINGS: Quantitative relations are established between TAG cooling profile, crystal structure and morphology, surface energy γSFE, and removal (or 'cleaning'). In general, films cooled slowly from the melt yield heterogeneous morphologies with predominantly ß1' phase, higher polar γSFE, and faster removal timescales. By contrast, rapid cooling results in homogeneous films, rich in ß2' phase, low polar γSFE, and long removal times. Our results elucidate the non-trivial impact of TAG thermal history, connecting the multiscale semi-crystalline structure to surface energy, and eventually to film delamination by micellar solutions.
RESUMEN
We investigate the structure and interactions of a model anionic/amphoteric mixed surfactant micellar system, namely, sodium dodecyl sulfate (SDS) and N,N-dimethyldodecylamine N-oxide (DDAO), employing SANS, FTIR, DLS, and pH measurements, in the range 0.1-100 mM total surfactant concentration and 0-100% DDAO. Increasing surfactant concentration is found to elongate the prolate ellipsoid micelles (RPolar â¼ 25-40 Å), accompanied by up to a 6-fold increase in micellar charge. The surfactant synergy, in terms of micellar charge and size, diffusion coefficient, solution pH, and headgroup interactions, was found to vary with concentration. At lower concentrations (≤50 mM), the SDS-DDAO ratio of maximum synergy is found to be asymmetric (at 65-85% DDAO), which is rationalized using regular solution theory, suggesting an equilibrium between Na+ dissociation, DDAO protonation, and counterion concentration. At higher concentrations, maximum synergy shifts toward the equimolar ratio. Overall, our study expands and unifies previous reports, providing a comprehensive understanding for this model, synergetic mixed micellar system.
RESUMEN
We investigate the drying of isolated polymer solution droplets, employing acoustic levitation, and demonstrate the spontaneous generation of breath figures (BF) on the resulting polymer particles and capsules (â¼5-1000 µm) with controlled surface pore arrays (<1-20 µm). By contrast with supported polymer thin films, the evaporative cooling experienced by suspended droplets suffices to yield ubiquitous BF formation, owing to their thermal insulation and the synchronous condensation and self-assembly of water microdroplets, accompanied by capsule skin formation and kinetic arrest. A simple model describes simultaneously the radius and temperature evolution along the droplet-to-particle transformation, and the scaling of surface pore dimensions, with environmental parameters. The generality of the approach is demonstrated with a range of model polymers, and the coupled roles of solution thermodynamics and droplet environment are shown to permit the facile design of capsules with tunable transport and dissolution kinetics.
RESUMEN
We investigate the solution structures of model sodium dodecyl sulfate/octanol/brine ternary mixtures across the lamellar (Lα), vesicle (L4) and micellar (L1) phases employing small angle neutron scattering (SANS), optical microscopy and nuclear magnetic resonance (NMR). Specifically, we examine the effect of co-surfactant octanol (0.2-9.48 w/v%) and temperature (25-65 °C) along dilution lines at fixed octanol : SDS ratios (0.08-1.21). A transition from Lα to sponge phase (L3) above 35 °C is found along the octanol : SDS = 1.21 isopleth, with phase coexistence above Ï ≈ 0.14 weight fraction of surfactant and co-surfactant. The lamellar bilayers swell upon dilution, with an approximately linear increase of d-spacing, accompanied by a decrease of the Caillé parameter, indicative of greater membrane rigidity. At a lower octanol : SDS ratio of 0.62, coexistence of oblate micelles and vesicles is observed with preferential formation of vesicles at low concentrations. Dilution of the L1 phase, along octanol : SDS = 0.08, results in elongated micelles, as the NaCl : SDS ratio increases, while higher temperatures favour the formation of less elongated micelles. Our results provide a detailed map of the equilibrium structures found in the Lα vicinity of this extensively investigated flow-responsive surfactant system.
RESUMEN
We investigate the thermodynamics of a highly interacting blend of poly(cyclohexyl methacrylate)/deuterated poly(styrene) (PCHMA/dPS) with small-angle neutron scattering (SANS). This system is experimentally challenging due to the proximity of the blend phase boundary (>200 °C) and degradation temperatures. To achieve the large wavenumber q-range and flux required for kinetic experiments, we employ a SANS diffractometer in time-of-flight (TOF) mode at a reactor source and ancillary microscopy, calorimetry, and thermal gravimetric analysis. Isothermal SANS data are well described by random-phase approximation (RPA), yielding the second derivative of the free energy of mixing (Gâ³), the effective interaction (χÌ ) parameter, and extrapolated spinodal temperatures. Instead of the Cahn-Hilliard-Cook (CHC) framework, temperature (T)-jump experiments within the one-phase region are found to be well described by the RPA at all temperatures away from the glass transition temperature, providing effectively near-equilibrium results. We employ CHC theory to estimate the blend mobility and Gâ³(T) conditions where such an approximation holds. TOF-SANS is then used to precisely resolve Gâ³(T) and χÌ (T) during T-jumps in intervals of a few seconds and overall timescales of a few minutes. PCHMA/dPS emerges as a highly interacting partially miscible blend, with a steep dependence of Gâ³(T) [mol/cm3] = -0.00228 + 1.1821/T [K], which we benchmark against previously reported highly interacting lower critical solution temperature (LCST) polymer blends.
RESUMEN
Coupling microfluidics and small-angle neutron scattering (SANS), we investigate the influence of shear flow on a model bicontinuous microemulsion of D2O/n-octane/C10E4, examining the role of membrane volume fraction in the transformation towards a lamellar structure. We employ a contraction-expansion geometry with flow velocities in excess of 10 m s-1 and spatially map the microfluidic field using a small SANS beam, illuminating down to 10 nL sample volumes. The shear-induced, progressive, bicontinuous-to-lamellar transition is found to be promoted by additional extensional flow (>103 s-1), while fast relaxation kinetics (<2 ms) return the scattering pattern to isotropic shortly after the constriction. Further, increasing the domain size of the bicontinuous structure (determined by the membrane volume fraction) appears to amplify its response to shear. Hence, the structural changes within the dilute bicontinuous microemulsions simply scale with the volume fraction of the membrane. By contrast, the stronger response of the microemulsion with the smallest domain size, located near the bicontinuous/lamellar coexistence, indicates an influence of an already more ordered structure with fewer passages. Our findings provide insight into the high shear behaviour of microemulsions of both academic and industrial relevance.
RESUMEN
We report the coupling of dynamic light scattering (DLS) in microfluidics, using a contact-free fibre-optic system, enabling the under-flow characterisation of a range of solutions, dispersions, and structured fluids. The system is evaluated and validated with model systems, specifically micellar and (dilute) polymer solutions, and colloidal dispersions of different radii (â¼1-100 nm). A systematic method of flow-DLS analysis is examined as a function of flow velocity (0-16 cm s-1), and considerations of the relative contribution of 'transit' and 'Brownian' terms enable the identification of regions where (i) a quiescent approximation suffices, (ii) the flow-DLS framework holds, as well as (iii) where deviations are found, until eventually (iv) the convection dominates. We investigate practically relevant, robust setups, namely that of a capillary connected to microdevice, as well as direct measurement on a glass microdevice, examining the role of capillary dimensions and challenges of optical alignment. We conclude with a demonstration of a continuous flow measurement of a binary surfactant/salt solution, whose micellar dimensions vary with composition, characterised with hundreds of data points (every â¼5 s) and adequate statistics, within a few minutes.
RESUMEN
We investigate the combined effects of surface diffraction and total internal reflection (TIR) in the design of 3-dimensional materials exhibiting distinct structural colour on various facets. We employ mechanical wrinkling to introduce surface diffraction gratings (from the nano to the micron scales) on one face of an elastomeric rectangular parallelepiped-shaped slab and explore the roles, in the perceived colours, of wrinkling pattern, wavelength, the directionality of incident light and observation angles. We propose a simple model that satisfactorily accounts for all experimental observations. Employing polydimethylsiloxane (PDMS), which readily swells in the presence of various liquids and gases, we demonstrate that such multifaceted colours can respond to their environment. By coupling a right angle triangular prism with a surface grating, we demonstrate the straightforward fabrication of a so-called GRISM (GRating + prISM). Finally, using a range of examples, we outline possibilities for a predictive material design using multi-axial wrinkling patterns and more complex polyhedra.
Asunto(s)
Gases , ElasticidadRESUMEN
HYPOTHESIS: Shear flow applied to bicontinuous microemulsions is expected to induce a transition to lamellae via the suppression of surfactant monolayer fluctuations. Compared to the topologically analogous L3 (sponge) phase, composed of surfactant bilayers, this transition is likely to occur at much higher shear rates. EXPERIMENTS: We examine the flow response of a model bicontinuous microemulsion, D2O/n-octane/C10E4 by coupling microfluidics with small-angle neutron scattering (SANS), attaining wall shear rates in excess of 105 s-1. The reduction of probed sample volumes down to â¼10 nL allows the spatial mapping of the structural and orientation changes within the microchannel, as a function of the flow field components. FINDINGS: With increasing flow rate, we observe a gradual increase in scattering anisotropy, accompanied by a decrease of the microemulsion domain size along the main flow orientation. A consistent description of the degree of anisotropy was obtained when considering the velocity gradient along the scattering plane perpendicular to the flow. We discuss the flow dependence of the effective bending rigidity, rationalizing a strong influence of shear on thermal membrane fluctuations. Assuming a similar shear dependence for the saddle splay modulus, the bicontinuous-to-lamellar transition can be attributed to the gradual disappearance of inter-lamellar passages.
RESUMEN
We investigate the phase behavior of model ternary triacylglycerol blends, comprising triolein (C57H104O6, OOO), tripalmitin (C51H98O6, PPP) and tristearin (C57H110O6, SSS), building upon extensive characterisation of single and binary mixtures, in order to rigorously map the thermal transitions of model natural 'fats'. A combination of calorimetry, X-ray diffraction, and FTIR spectroscopy is employed to determine crystallisation and melting temperatures and identify the corresponding phases in the complex ternary system. We recover the eutectic behaviour of SSS-PPP blends and the invariability of OOO neat transitions, and resolve the complex ß' + ß ternary surface, reflecting the roles of unsaturation and polymorphism of its constituents. Our results provide a representation of the OOO:PPP:SSS:temperature phase behaviour into a triangular prism, consistent with binary pair-wise data, which can inform a range of food science, cosmetic, pharmaceutical and cleaning applications that depend strongly on the physical-chemistry of such multicomponent 'triglycerides'.
Asunto(s)
Trioleína , Trioleína/química , Triglicéridos/química , Cristalización , Difracción de Rayos XRESUMEN
Membrane remodeling occurs constantly at the plasma membrane and within cellular organelles. To fully dissect the role of the environment (ionic conditions, protein and lipid compositions, membrane curvature) and the different partners associated with specific membrane reshaping processes, we undertake in vitro bottom-up approaches. In recent years, there has been keen interest in revealing the role of septin proteins associated with major diseases. Septins are essential and ubiquitous cytoskeletal proteins that interact with the plasma membrane. They are implicated in cell division, cell motility, neuro-morphogenesis, and spermiogenesis, among other functions. It is, therefore, important to understand how septins interact and organize at membranes to subsequently induce membrane deformations and how they can be sensitive to specific membrane curvatures. This article aims to decipher the interplay between the ultra-structure of septins at a molecular level and the membrane remodeling occurring at a micron scale. To this end, budding yeast, and mammalian septin complexes were recombinantly expressed and purified. A combination of in vitro assays was then used to analyze the self-assembly of septins at the membrane. Supported lipid bilayers (SLBs), giant unilamellar vesicles (GUVs), large unilamellar vesicles (LUVs), and wavy substrates were used to study the interplay between septin self-assembly, membrane reshaping, and membrane curvature.
Asunto(s)
Septinas , Liposomas Unilamelares , Animales , Membrana Celular/metabolismo , Citoesqueleto/metabolismo , Membrana Dobles de Lípidos/química , Mamíferos/metabolismo , Saccharomyces cerevisiae/metabolismo , Septinas/química , Septinas/genética , Septinas/metabolismo , Liposomas Unilamelares/metabolismoRESUMEN
We investigate the effect of added (NaCl) salt and varying flow rate on the phase behaviour and flow response of a model surfactant Lα phase, sodium dodecyl sulfate (SDS)/octanol/water, using small angle neutron scattering (SANS) and polarised optical microscopy in microfluidics, supported by NMR, viscosity, conductivity and zeta potential measurements. A long (â¼3 m) tubular microchannel device is employed to quantify the spatiotemporal structural evolution of the system towards multilamellar vesicles (MLV). The effect of salt is rationalised in terms of changes in membrane bending rigidity and phase stability. It is shown that â¼1.8 w/w% NaCl addition results in MLV formation within the shortest time (or equivalent lengthscale) and yields near-centrosymmetric scattering profiles characteristic of MLVs (at a reference 1 mL h-1 flow rate and ≃90 s-1 shear rate). Further salt addition yields biphasic systems that remain strongly aligned under flow, while lower salt content also increases scattering anisotropy, accompanied by higher membrane rigidity and solution viscosity. Increasing flow rate causes greater initial Lα alignment, and thus flow anisotropy, but also faster evolution towards isotropy and MLV formation.
RESUMEN
We investigate the effect of micrometer-scale surface wrinkling on the attachment and proliferation of model bacteria (Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli K12) and fungi (Candida albicans). Specifically, sinusoidal (1D), checkerboard (C), and herringbone (H) patterns were fabricated by mechanical wrinkling of plasma-oxidized polydimethylsiloxane (PDMS) bilayers and contrasted with flat (F) surfaces. Microbial deformation and orientation were found to correlate with the aspect ratio and commensurably with surface pattern dimensions and local pattern order. Significantly, the proliferation of P. aeruginosa could be described by a linear scaling between bacterial area coverage and available surface area, defined as a fraction of the line integral along each profile with negative curvature. However, in the early stages of proliferation (up to 6 h examined), that C and H patterns disrupt the spatial arrangement of bacteria, impeding proliferation for several hours and reducing it (by â¼50%) thereafter. Our findings suggest a simple framework to rationalize the impact of micrometer-scale topography on microbial action and demonstrate that multiaxial patterning order provides an effective strategy to delay and frustrate the early stages of bacterial proliferation.
Asunto(s)
Pseudomonas aeruginosa , Staphylococcus aureus , Bacterias , Candida albicans/fisiología , Pseudomonas aeruginosa/fisiología , Staphylococcus aureus/fisiologíaRESUMEN
HYPOTHESIS: Predicting the surface tension (SFT)-log(c) profiles of hydrocarbon surfactants in aqueous solution is computationally non-trivial, and empirically challenging due to the diverse and complex architecture and interactions of surfactant molecules. Machine learning (ML), combining a data-based and knowledge-based approach, can provide a powerful means to relate molecular descriptors to SFT profiles. EXPERIMENTS: A dataset of SFT for 154 model hydrocarbon surfactants at 20-30 °C is fitted to the Szyszkowski equation to extract three characteristic parameters (Γmax,KL and critical micelle concentration (CMC)) which are correlated to a series of 2D and 3D molecular descriptors. Key (â¼10) descriptors were selected by removing co-correlation, and employing a gradient-boosted regressor model to rank feature importance and carry out recursive feature elimination (RFE). The hyperparameters of each target-variable model were fine-tuned using a randomised cross-validated grid search, to improve predictive ability and reduce overfitting. FINDINGS: The ML models correlate favourably with test experimental data, with R2= 0.69-0.87, and the merits and limitations of the approach are discussed based on 'unseen' hydrocarbon surfactants. The incorporation of a knowledge-based framework provides an appropriate smoothing of the experimental data which simplifies the data-driven approach and enhances its generality. Open-source codes and a brief tutorial are provided.
Asunto(s)
Micelas , Tensoactivos , Hidrocarburos , Aprendizaje Automático , Tensión Superficial , AguaRESUMEN
We examine the solution structures in a mixed surfactant system of sodium dodecyl sulfate (SDS) and N,N-dimethyldodecylamine N-oxide (DDAO) in water, on both sides of the two-phase boundary, employing dynamic light scattering, small-angle neutron scattering, and Fourier transform infrared spectroscopy. The precipitate phase boundary was accessed by lowering pH to 8, from its floating pH 9.5 value, and was experimentally approached from the monomeric and micellar regions in three ways: at fixed DDAO or SDS concentrations and at a fixed (70:30) SDS:DDAO molar ratio. We characterize the size, shape, and interactions of micelles, which elongate approaching the boundary, leading to the formation of disk-like aggregates within the biphasic region, coexisting with micelles and monomers. Our data, from both monomeric and micellar solutions, indicate that the two phase structures formed are largely pathway-independent, with dimensions influenced by both pH and mixed surfactant composition. Precipitation occurs at intermediate stoichiometries with a similar SDS:DDAO ratio, whereas asymmetric stoichiometries form a re-entrant transition, returning to the mixed micelle phase. Overall, our findings demonstrate the effect of stoichiometry and solution pH on the synergistic interaction of mixed surfactants and their impact on phase equilibrium and associated micellar and two-phase structures.
RESUMEN
While polyamide (PA) membranes are widespread in water purification and desalination by reverse osmosis, a molecular-level understanding of the dynamics of both confined water and polymer matrix remains elusive. Despite the dense hierarchical structure of PA membranes formed by interfacial polymerization, previous studies suggest that water diffusion remains largely unchanged with respect to bulk water. Here, we employ neutron spectroscopy to investigate PA membranes under precise hydration conditions, and a series of isotopic contrasts, to elucidate water transport and polymer relaxation, spanning ps-ns timescales, and Å-nm lengthscales. We experimentally resolve, for the first time, the multimodal diffusive nature of water in PA membranes: in addition to (slowed down) translational jump-diffusion, we observe a long-range and a localized mode, whose geometry and timescales we quantify. The PA matrix is also found to exhibit rotational relaxations commensurate with the nanoscale confinement observed in water diffusion. This comprehensive 'diffusion map' can anchor molecular and nanoscale simulations, and enable the predictive design of PA membranes with tuneable performance.
RESUMEN
We investigate the conformation of poly(2,6-diphenyl-p-phenylene oxide) (PPPO) in good and mixed solvents by small-angle neutron scattering (SANS) across its ternary phase diagram. Dichloromethane was selected as a "good" solvent and heptane as a "poor" solvent whose addition eventually induces demixing and polymer precipitation. Below the overlap concentration c*, the polymer conformation is found to be well described by the polymer-excluded volume model and above by the Ornstein-Zernike expression with a correlation length ξ which depends on the concentration and solvent/nonsolvent ratio. We quantify the decrease in polymer radius of gyration R g , increase in ξ, and effective χ parameter approaching the phase boundary. Upon flash nanoprecipitation, the characteristic particle radius (estimated by scanning electron microscopy, SEM) is found to scale with polymer concentration as well as with nonsolvent content. Significantly, the solution volume per precipitated particle remains nearly constant at all polymer concentrations. Overall, our findings correlate ternary solution structure with the fabrication of polymer nanoparticles by nonsolvent-induced phase separation and precipitation.
RESUMEN
We report the formation of "ripple" patterns by the sequential superposition of nonorthogonal surface waves excited by the spontaneous buckling of polymeric bilayers. Albeit of a different nature and micron scale compared to the familiar sedimentary ripples caused by gentle wave oscillations, we find commonalities in their topography, defects, and bifurcations. The patterns are rationalized in terms of a defect density that depends on the relative angle between generations, and a constant in-plane bending angle that depends on skin thickness. A minimal wave summation model enables the design of ripple and checkerboard surfaces by tuning material properties and fabrication process.