Shedding light on the use of graphene oxide-thiosemicarbazone hybrids towards the rapid immobilisation of methylene blue and functional coumarins.

Coumarins, methylene blue derivatives, as well as related functional organic dyes have become prevalent tools in life sciences and biomedicine. Their intense blue fluorescence emission makes them ideal agents for a range of applications, yet an unwanted facet of the interesting biological properties of such probes presents a simultaneous environmental threat due to inherent toxicity and persistence in aqueous media. As such, significant research efforts now ought to focus on their removal from the environment, and the sustainable trapping onto widely available, water dispersible and processable adsorbent structures such as graphene oxides could be advantageous. Additionally, flat and aromatic bis(thiosemicarbazones) (BTSCs) have shown biocompatibility and chemotherapeutic potential, as well as intrinsic fluorescence, hence traceability in the environment and in living systems. A new palette of graphene oxide-based hierarchical supramolecular materials incorporating BTSCs were prepared, characterised, and reported hereby. We report on the supramolecular entrapping of several flat, aromatic fluorogenic molecules onto graphene oxide on basis of non-covalent interactions, by virtue of their structural features with potential to form aromatic stacks and H-bonds. The evaluations of the binding interactions in solution by between organic dyes (methylene blue and functional coumarins) and new graphene oxide-anchored Zn(ii) derivatised bis(thiosemicarbazones) nanohybrids were carried out by UV-Vis and fluorescence spectroscopies.

Functional Diversity in Radiolabeled Nanoceramics and Related Biomaterials for the Multimodal Imaging of Tumors.

Nanotechnology advances have the potential to assist toward the earlier detection of diseases, giving increased accuracy for diagnosis and helping to personalize treatments, especially in the case of noncommunicative diseases (NCDs) such as cancer. The main advantage of nanoparticles, the scaffolds underpinning nanomedicine, is their potential to present multifunctionality: synthetic nanoplatforms for nanomedicines can be tailored to support a range of biomedical imaging modalities of relevance for clinical practice, such as, for example, optical imaging, computed tomography (CT), magnetic resonance imaging (MRI), single photon emission computed tomography (SPECT), and positron emission tomography (PET). A single nanoparticle has the potential to incorporate myriads of contrast agent units or imaging tracers, encapsulate, and/or be conjugated to different combinations of imaging tags, thus providing the means for multimodality diagnostic methods. These arrangements have been shown to provide significant improvements to the signal-to-noise ratios that may be obtained by molecular imaging techniques, for example, in PET diagnostic imaging with nanomaterials versus the cases when molecular species are involved as radiotracers. We surveyed some of the main discoveries in the simultaneous incorporation of nanoparticulate materials and imaging agents within highly kinetically stable radio-nanomaterials as potential tracers with (pre)clinical potential. Diversity in function and new developments toward synthesis, radiolabeling, and microscopy investigations are explored, and preclinical applications in molecular imaging are highlighted. The emphasis is on the biocompatible materials at the forefront of the main preclinical developments, e.g., nanoceramics and liposome-based constructs, which have driven the evolution of diagnostic radio-nanomedicines over the past decade.

Corrigendum: Nano-Theranostics for the Sensing, Imaging and Therapy of Prostate Cancers.

[This corrects the article DOI: 10.3389/fchem.2022.830133.].

Nano-Theranostics for the Sensing, Imaging and Therapy of Prostate Cancers.

We highlight hereby recent developments in the emerging field of theranostics, which encompasses the combination of therapeutics and diagnostics in a single entity aimed for an early-stage diagnosis, image-guided therapy as well as evaluation of therapeutic outcomes of relevance to prostate cancer (PCa). Prostate cancer is one of the most common malignancies in men and a frequent cause of male cancer death. As such, this overview is concerned with recent developments in imaging and sensing of relevance to prostate cancer diagnosis and therapeutic monitoring. A major advantage for the effective treatment of PCa is an early diagnosis that would provide information for an appropriate treatment. Several imaging techniques are being developed to diagnose and monitor different stages of cancer in general, and patient stratification is particularly relevant for PCa. Hybrid imaging techniques applicable for diagnosis combine complementary structural and morphological information to enhance resolution and sensitivity of imaging. The focus of this review is to sum up some of the most recent advances in the nanotechnological approaches to the sensing and treatment of prostate cancer (PCa). Targeted imaging using nanoparticles, radiotracers and biomarkers could result to a more specialised and personalised diagnosis and treatment of PCa. A myriad of reports has been published literature proposing methods to detect and treat PCa using nanoparticles but the number of techniques approved for clinical use is relatively small. Another facet of this report is on reviewing aspects of the role of functional nanoparticles in multimodality imaging therapy considering recent developments in simultaneous PET-MRI (Positron Emission Tomography-Magnetic Resonance Imaging) coupled with optical imaging in vitro and in vivo, whilst highlighting feasible case studies that hold promise for the next generation of dual modality medical imaging of PCa. It is envisaged that progress in the field of imaging and sensing domains, taken together, could benefit from the biomedical implementation of new synthetic platforms such as metal complexes and functional materials supported on organic molecular species, which can be conjugated to targeting biomolecules and encompass adaptable and versatile molecular architectures. Furthermore, we include hereby an overview of aspects of biosensing methods aimed to tackle PCa: prostate biomarkers such as Prostate Specific Antigen (PSA) have been incorporated into synthetic platforms and explored in the context of sensing and imaging applications in preclinical investigations for the early detection of PCa. Finally, some of the societal concerns around nanotechnology being used for the detection of PCa are considered and addressed together with the concerns about the toxicity of nanoparticles-these were aspects of recent lively debates that currently hamper the clinical advancements of nano-theranostics. The publications survey conducted for this review includes, to the best of our knowledge, some of the most recent relevant literature examples from the state-of-the-art. Highlighting these advances would be of interest to the biomedical research community aiming to advance the application of theranostics particularly in PCa diagnosis and treatment, but also to those interested in the development of new probes and methodologies for the simultaneous imaging and therapy monitoring employed for PCa targeting.

Biocompatible Probes Based on Rare-Earth Doped Strontium Aluminates with Long-Lasting Phosphorescent Properties for In Vitro Optical IMAGING.

In recent decades, the demand for biomedical imaging tools has grown very rapidly as a key feature for biomedical research and diagnostic applications. Particularly, fluorescence imaging has gained increased attention as a non-invasive, inexpensive technique that allows real-time imaging. However, tissue auto-fluorescence under external illumination, together with a weak tissue penetration of low wavelength excitation light, largely restricts the application of the technique. Accordingly, new types of fluorescent labels are currently being investigated and, in this search, phosphorescent nanoparticles promise great potential, as they combine the interesting size-dependent properties of nanoscale materials with a long-lasting phosphorescence-type emission that allows optical imaging well after excitation (so avoiding autofluorescence). In this work, core-shell structures consisting of SrAlO:Eu,Dy luminescent cores encapsulated within a biocompatible silica shell were prepared, showing a green persistent phosphorescence with an afterglow time of more than 1000 s. A high-energy ball milling procedure was used to reduce the size of the starting phosphors to a size suitable for cellular uptake, while the silica coating was produced by a reverse micelle methodology that eventually allows the excitation and emission light to pass efficiently through the shell. Confocal fluorescence microscopy using HeLa cancer cells confirmed the potential of the all-ceramic composites produced as feasible labels for in vitro optical imaging.

Ultrafast Macroscopic Assembly of High-Strength Graphene Oxide Membranes by Implanting an Interlaminar Superhydrophilic Aisle.

A macroscopic-assembled graphene oxide (GO) membrane with sustainable high strength presents a bright future for its applications in ionic and molecular filtration for water purification or fast force response for sensors. Traditionally, the bottom-up macroscopic assembly of GO sheets is optimized by widening the interlaminar space for expediting water passage, frequently leading to a compromise in strength, assembly time, and ensemble thickness. Herein, we rationalize this strategy by implanting a superhydrophilic bridge of cobalt-based metal-organic framework nanosheets (NMOF-Co) as an additional water "aisle" into the interlaminar space of GO sheets (GO/NMOF-Co), resulting in a high-strength macroscopic membrane ensemble with tunable thickness from the nanometer scale to the centimeter scale. The GO/NMOF-Co membrane assembly time is only 18 s, 30800 times faster than that of pure GO (154 h). More importantly, the obtained membrane attains a strength of 124.4 MPa, which is more than 3 times higher than that of the GO membrane prepared through filtration. The effect of hydrophilicity on membrane assembly is also investigated by introducing different intercalants, suggesting that, except for the interlamellar spacing, the interlayered hydrophilicity plays a more decisive role in the macroscopic assembly of GO membranes. Our results give a fundamental implication for fast macroscopic assembly of high-strength 2D materials.

Self-Assembled Materials Incorporating Functional Porphyrins and Carbon Nanoplatforms as Building Blocks for Photovoltaic Energy Applications.

As a primary goal, this review highlights the role of supramolecular interactions in the assembly of new sustainable materials incorporating functional porphyrins and carbon nanoplatforms as building blocks for photovoltaics advancements.

Hybrid Hierarchical Heterostructures of Nanoceramic Phosphors as Imaging Agents for Multiplexing and Living Cancer Cells Translocation.

Existing fluorescent labels used in life sciences are based on organic compounds with limited lifetime or on quantum dots which are either expensive or toxic and have low kinetic stability in biological environments. To address these challenges, luminescent nanomaterials have been conceived as hierarchical, core-shell structures with spherical morphology and highly controlled dimensions. These tailor-made nanophosphors incorporate Ln:YVO4 nanoparticles (Ln = Eu(III) and Er(III)) as 50 nm cores and display intense and narrow emission maxima centered at ∼565 nm. These cores can be encapsulated in silica shells with highly controlled dimensions as well as functionalized with chitosan or PEG5000 to reduce nonspecific interactions with biomolecules in living cells. Confocal fluorescence microscopy in living prostate cancer cells confirmed the potential of these platforms to overcome the disadvantages of commercial fluorophores and their feasibility as labels for multiplexing, biosensing, and imaging in life science assays.

Shedding Light Onto the Nature of Iron Decorated Graphene and Graphite Oxide Nanohybrids for CO2 Conversion at Atmospheric Pressure.

We report on the design and testing of new graphite and graphene oxide-based extended π-conjugated synthetic scaffolds for applications in sustainable chemistry transformations. Nanoparticle-functionalised carbonaceous catalysts for new Fischer Tropsch and Reverse GasWater Shift (RGWS) transformations were prepared: functional graphene oxides emerged from graphite powders via an adapted Hummer's method and subsequently impregnated with uniform-sized nanoparticles. Then the resulting nanomaterials were imaged by TEM, SEM, EDX, AFM and characterised by IR, XPS and Raman spectroscopies prior to incorporation of Pd(II) promoters and further microscopic and spectroscopic analysis. Newly synthesised 2D and 3D layered nanostructures incorporating carbon-supported iron oxide nanoparticulate pre-catalysts were tested, upon hydrogen reduction in situ, for the conversion of CO2 to CO as well as for the selective formation of CH4 and longer chain hydrocarbons. The reduction reaction was also carried out and the catalytic species isolated and fully characterised. The catalytic activity of a graphene oxide-supported iron oxide pre-catalyst converted CO2 into hydrocarbons at different temperatures (305, 335, 370 and 405 °C), and its activity compared well with that of the analogues supported on graphite oxide, the 3-dimensional material precursor to the graphene oxide. Investigation into the use of graphene oxide as a framework for catalysis showed that it has promising activity with respect to reverse gas water shift (RWGS) reaction of CO2 to CO, even at the low levels of catalyst used and under the rather mild conditions employed at atmospheric pressure. Whilst the γ-Fe2O3 decorated graphene oxide-based pre-catalyst displays fairly constant activity up to 405 °C, it was found by GC-MS analysis to be unstable with respect to decomposition at higher temperatures. The addition of palladium as a promoter increased the activity of the iron functionalised graphite oxide in the RWGS. The activity of graphene oxide supported catalysts was found to be enhanced with respect to that of iron-functionalised graphite oxide with, or without palladium as a promoter, and comparable to that of Fe@carbon nanotube-based systems tested under analogous conditions. These results display a significant step forward for the catalytic activity estimations for the iron functionalised and rapidly processable and scalable graphene oxide. The hereby investigated phenomena are of particular relevance for the understanding of the intimate surface morphologies and the potential role of non-covalent interactions in the iron oxide-graphene oxide networks, which could inform the design of nano-materials with performance in future sustainable catalysis applications.

Tailoring the visible light photoactivity of un-doped defective TiO2 anatase nanoparticles through a simple two-step solvothermal process.

Anatase TiO2 has become a material of great interest for photocatalytic production of hydrogen, environmental purification and solar energy conversion. Among the key parameters boosting the photocatalytic efficiency of the anatase nanoparticles, an increased light absorption to expand its optical response to the visible region, together with an improved charge separation of the photo-generated electrons and holes, can be enumerated. In this work, yellow-coloured, single-phase anatase nanoparticles have been obtained using a simple two-step solvothermal routine which requires no external addition of dopants, nor the use of a harassing/aggressive synthesis atmosphere. The obtained powders display a lowered bandgap (<3.0 eV) and significantly reduce the recombination processes, eventually leading to an improved photocatalytic performance under visible light, as exemplified by an enhanced degradation of phenol. This exceptional response is linked to the presence of intrinsic defects in the yellowish particles and, hence, the specific conditions of the proposed methodology become crucial to produce a propitious TiO2-defective nanomaterial capable of photo-degrade the phenol molecule, in contrast with the lack of photocatalytic activity currently exhibited by commercial photocatalysts under visible light.

Proteomic investigation on bio-corona of Au, Ag and Fe nanoparticles for the discovery of triple negative breast cancer serum protein biomarkers.

Nowadays, there are no targeted therapeutic modalities for triple negative breast cancer (TNBC). This disease is associated with poor prognosis and worst clinical outcome because of the aggressive nature of the tumor, delayed diagnosis, and non-specific symptoms in the early stages. Therefore, identification of novel specific TNBC serum biomarkers for screening and therapeutic purposes remains an urgent clinical requirement. New user-friendly and cheap methods for biomarker identification are needed, and nanotechnology offers new opportunities. When dispersed in blood, nanoparticles (NPs) are covered by a protein shell termed "protein corona" (PC). While alterations in protein patterns are challeging to detect by conventional blood analyses, PC acts as a "nano-concentrator" of serum proteins with affinity for NPs' surface. So, the characterization of PC could allow the detection of otherwise undetectable changes in protein concentration at an early stage of the disease or after chemotherapy or surgery. To explore this research idea, serum samples from 8 triple negative breast cancer (TNBC) patients and 8 patients without malignancy were allowed to interact with gold nanoparticles (AuNPs: 10.02 ±â€¯0.91 nm), silver nanoparticles (AgNPs: 9.73 ±â€¯1.70 nm) and magnetic nanoparticles (MNPs: (9.30 ±â€¯0.67 nm). Here, in order to identify biomarker candidates in serum of TNBC patients, these nanomaterials were combined with electrophoretic separation (SDS-PAGE) to performed qualitative and quantitative comparisons of the serum proteomes of TNBC patients (n = 8) and healthy controls (n = 8) by liquid chromatography tandem-mass spectrometry (LC-MS/MS) analysis. The results were validated through a sequential window acquisition of all theoretical mass spectra (SWATH) analysis, performed in total serum samples (patients and controls) using this approach as a multiple reaction monitoring (MRM) analysis. SIGNIFICANCE: It is well known that several proteins presented in human serum are important biomarkers for the diagnosis or prognosis of different diseases, as triple negative breast cancer (TNBC). Determining how nanomaterials as gold nanoparticles (AuNPs: 10.02 ±â€¯0.91 nm), silver nanoparticles (AgNPs: 9.73 ±â€¯1.70 nm) and magnetic nanoparticles (MNPs: (9.30 ±â€¯0.67 nm) interact with human serum will assist not only in understanding their effects on the biological system (biocompability and toxicity), but also to obtain information for developing novel nanomaterials with high specificity and selectivity towards proteins with an important biological function (prognostic and diagnostic protein biomarkers).

Directed Molecular Stacking for Engineered Fluorescent Three-Dimensional Reduced Graphene Oxide and Coronene Frameworks.

Three-dimensional fluorescent graphene frameworks with controlled porous morphologies are of significant importance for practical applications reliant on controlled structural and electronic properties, such as organic electronics and photochemistry. Here we report a synthetically accessible approach concerning directed aromatic stacking interactions to give rise to new fluorogenic 3D frameworks with tuneable porosities achieved through molecular variations. The binding interactions between the graphene-like domains present in the in situ-formed reduced graphene oxide (rGO) with functional porphyrin molecules lead to new hybrids via an unprecedented solvothermal reaction. Functional free-base porphyrins featuring perfluorinated aryl groups or hexyl chains at their meso- and ß-positions were employed in turn to act as directing entities for the assembly of new graphene-based and foam-like frameworks and of their corresponding coronene-based hybrids. Investigations in the dispersed phase and in thin-film by XPS, SEM and FLIM shed light onto the nature of the aromatic stacking within functional rGO frameworks (denoted rGOFs) which was then modelled semi-empirically and by DFT calculations. The pore sizes of the new emerging reduced graphene oxide hybrids are tuneable at the molecular level and mediated by the bonding forces with the functional porphyrins acting as the "molecular glue". Single crystal X-ray crystallography described the stacking of a perfluorinated porphyrin with coronene, which can be employed as a molecular model for understanding the local aromatic stacking order and charge transfer interactions within these rGOFs for the first time. This opens up a new route to controllable 3D framework morphologies and pore size from the Ångstrom to the micrometre scale. Theoretical modelling showed that the porosity of these materials is mainly due to the controlled inter-planar distance between the rGO, coronene or graphene sheets. The host-guest chemistry involves the porphyrins acting as guests held through π-π stacking, as demonstrated by XPS. The objective of this study is also to shed light into the fundamental localised electronic and energy transfer properties in these new molecularly engineered porous and fluorogenic architectures, aiming in turn to understand how functional porphyrins may exert stacking control over the notoriously disordered local structure present in porous reduced graphene oxide fragments. By tuning the porosity and the distance between the graphene sheets using aromatic stacking with porphyrins, it is also possible to tune the electronic structure of the final nanohybrid material, as indicated by FLIM experiments on thin films. Such nanohybrids with highly controlled pores dimensions and morphologies open the way to new design and assembly of storage devices and applications incorporating π-conjugated molecules and materials and their π-stacks may be relevant towards selective separation membranes, water purification and biosensing applications.

Synthesis, Radiolabelling and In Vitro Imaging of Multifunctional Nanoceramics.

Molecular imaging has become a powerful technique in preclinical and clinical research aiming towards the diagnosis of many diseases. In this work, we address the synthetic challenges in achieving lab-scale, batch-to-batch reproducible copper-64- and gallium-68-radiolabelled metal nanoparticles (MNPs) for cellular imaging purposes. Composite NPs incorporating magnetic iron oxide cores with luminescent quantum dots were simultaneously encapsulated within a thin silica shell, yielding water-dispersible, biocompatible and luminescent NPs. Scalable surface modification protocols to attach the radioisotopes 64Cu (t1/2=12.7 h) and 68Ga (t1/2=68 min) in high yields are reported, and are compatible with the time frame of radiolabelling. Confocal and fluorescence lifetime imaging studies confirm the uptake of the encapsulated imaging agents and their cytoplasmic localisation in prostate cancer (PC-3) cells. Cellular viability assays show that the biocompatibility of the system is improved when the fluorophores are encapsulated within a silica shell. The functional and biocompatible SiO2 matrix represents an ideal platform for the incorporation of 64Cu and 68Ga radioisotopes with high radiolabelling incorporation.

Encapsulation of Cadmium Selenide Nanocrystals in Biocompatible Nanotubes: DFT Calculations, X-ray Diffraction Investigations, and Confocal Fluorescence Imaging.

The encapsulation of CdSe nanocrystals within single-walled carbon nanotube (SWNT) cavities of varying dimensions at elevated temperatures under strictly air-tight conditions is described for the first time. The structures of CdSe nanocrystals under confinement inside SWNTs was established in a comprehensive study, combining both experimental and DFT theoretical investigations. The calculated binding energies show that all considered polymorphs [(3:3), (4:4), and (4:2)] may be obtained experimentally. The most thermodynamically stable structure (3:3) is directly compared to the experimentally observed CdSe structures inside carbon nanotubes. The gas-phase DFT-calculated energy difference between "free" 3:3 and 4:2 structures (whereby 3:3 models a novel tubular structure in which both Cd and Se form three coordination, as observed experimentally for HgTe inside SWNT, and 4:2 is a motif derived from the hexagonal CuI bulk structure in which both Cd and Se form 4 or 2 coordination) is surprisingly small, only 0.06 eV per formula unit. X-ray powder diffraction, Raman spectroscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray analyses led to the full characterization of the SWNTs filled with the CdSe nanocrystals, shedding light on the composition, structure, and electronic interactions of the new nanohybrid materials on an atomic level. A new emerging hybrid nanomaterial, simultaneously filled and beta-d-glucan coated, was obtained by using pristine nanotubes and bulk CdSe powder as starting materials. This displayed fluorescence in water dispersions and unexpected biocompatibility was found to be mediated by beta-d-glucan (a biopolymer extracted from barley) with respect to that of the individual inorganic material components. For the first time, such supramolecular nanostructures are investigated by life-science techniques applied to functional nanomaterial characterization, opening the door for future nano-biotechnological applications.

Fluorescence detection and removal of copper from water using a biobased and biodegradable 2D soft material.

We have developed a green and robust fluorogenic (λex = 410 nm, λem = 510 nm) cellulose membrane using graphene oxide (GO) as a construct for simultaneous copper ion recognition and filtration at environmentally relevant levels. The detection limit and removal limit of Cu2+ are 7.3 × 10-7 M and 1000 ppm, respectively. The simplicity and scalability achieved for the detection and removal of metal ions in waste water is particularly noteworthy given the significant problems associated with metal ion pollution of drinking water.

Fluorescence-Lifetime Imaging and Super-Resolution Microscopies Shed Light on the Directed- and Self-Assembly of Functional Porphyrins onto Carbon Nanotubes and Flat Surfaces.

Functional porphyrins have attracted intense attention due to their remarkably high extinction coefficients in the visible region and potential for optical and energy-related applications. Two new routes to functionalised SWNTs have been established using a bulky ZnII -porphyrin featuring thiolate groups at the periphery. We probed the optical properties of this zinc(II)-substituted, bulky aryl porphyrin and those of the corresponding new nano-composites with single walled carbon nanotube (SWNTs) and coronene, as a model for graphene. We report hereby on: i) the supramolecular interactions between the pristine SWNTs and ZnII -porphyrin by virtue of π-π stacking, and ii) a novel covalent binding strategy based on the Bingel reaction. The functional porphyrins used acted as dispersing agent for the SWNTs and the resulting nanohybrids showed improved dispersibility in common organic solvents. The synthesized hybrid materials were probed by various characterisation techniques, leading to the prediction that supramolecular polymerisation and host-guest functionalities control the fluorescence emission intensity and fluorescence lifetime properties. For the first time, XPS studies highlighted the differences in covalent versus non-covalent attachments of functional metalloporphyrins to SWNTs. Gas-phase DFT calculations indicated that the ZnII -porphyrin interacts non-covalently with SWNTs to form a donor-acceptor complex. The covalent attachment of the porphyrin chromophore to the surface of SWNTs affects the absorption and emission properties of the hybrid system to a greater extent than in the case of the supramolecular functionalisation of the SWNTs. This represents a synthetic challenge as well as an opportunity in the design of functional nanohybrids for future sensing and optoelectronic applications.

Applications of "Hot" and "Cold" Bis(thiosemicarbazonato) Metal Complexes in Multimodal Imaging.

The applications of coordination chemistry to molecular imaging has become a matter of intense research over the past 10 years. In particular, the applications of bis(thiosemicarbazonato) metal complexes in molecular imaging have mainly been focused on compounds with aliphatic backbones due to the in vivo imaging success of hypoxic tumors with PET (positron emission tomography) using (64) CuATSM [copper (diacetyl-bis(N4-methylthiosemicarbazone))]. This compound entered clinical trials in the US and the UK during the first decade of the 21(st) century for imaging hypoxia in head and neck tumors. The replacement of the ligand backbone to aromatic groups, coupled with the exocyclic N's functionalization during the synthesis of bis(thiosemicarbazones) opens the possibility to use the corresponding metal complexes as multimodal imaging agents of use, both in vitro for optical detection, and in vivo when radiolabeled with several different metallic species. The greater kinetic stability of acenaphthenequinone bis(thiosemicarbazonato) metal complexes, with respect to that of the corresponding aliphatic ATSM complexes, allows the stabilization of a number of imaging probes, with special interest in "cold" and "hot" Cu(II) and Ga(III) derivatives for PET applications and (111) In(III) derivatives for SPECT (single-photon emission computed tomography) applications, whilst Zn(II) derivatives display optical imaging properties in cells, with enhanced fluorescence emission and lifetime with respect to the free ligands. Preliminary studies have shown that gallium-based acenaphthenequinone bis(thiosemicarbazonato) complexes are also hypoxia selective in vitro, thus increasing the interest in them as new generation imaging agents for in vitro and in vivo applications.

Metallic nanoparticles as synthetic building blocks for cancer diagnostics: from materials design to molecular imaging applications.

Metallic nanoparticles have been a matter of intense exploration within the last decade due to their potential to change the face of the medical world through their role as 'nanotheranostics'. Their envisaged capacity to act as synthetic platforms for a multimodal imaging approach to diagnosis and treatment of degenerative diseases, including cancer, remains a matter of lively debate. Certain synthetic metal-based nanomaterials, e.g. gold and iron oxide nanoparticles, are already in clinical use or under advanced preclinical investigations following in vitro and in vivo preclinical imaging success. We surveyed the recent publications landscape including those reported metallic nanoparticles having established applications in vivo, as well as some of the new metallic nanoparticles which, despite their potential as cancer nanodiagnostics, are currently awaiting in vivo evaluation. The objective of this review is to highlight the current metallic nanoparticles and/or alloys as well as their derivatives with multimodal imaging potential, focusing on their chemistry as a springboard to discussing their role in the future of nanomedicines design. We also highlight here some of the fundamentals of molecular and nano-imaging techniques of relevance to the metal-based colloids, alloys and metallic nanoparticles discerning their future prospects as cancer nanodiagnostics. The current approaches for metallic and alloy surface derivatisation, aiming to achieve functional and biocompatible materials for multimodal bioimaging applications, are discussed in order to bring about some new perspectives on the efficiency of metallic nanoparticles as synthetic scaffolds for imaging probe design and forecast their future use in medical imaging techniques (optical, CT, PET, SPECT and MRI).

Microwave-induced fast crystallization of amorphous hierarchical anatase microspheres.

The fabrication of hierarchical anatase microspheres with potential photocatalytic properties eventually comprises a consolidation step in which a high degree of crystalline order is typically achieved through conventional electric heating treatments. This however entails a substantial reduction in the specific surface area and porosity of the powders, with the consequent deterioration in their photocatalytic response. Here, we have tested the employ of microwave heating as an alternative energy-saving sintering method to promote fast crystallization. The results obtained suggest that under the microwave radiation, the TiO2 hierarchical structures can effectively crystallize in a drastically reduced heating time, allowing the specific surface area and the porosity to be kept in the high values required for an improved photocatalytic performance.

Diphenyllead(IV) chloride complexes with benzilthiosemicarbazones. The first bis(thiosemicarbazone) derivatives.

Reactions of diphenyllead(IV) chloride with benzil bis(thiosemicarbazone) (L1H6) and benzil bis(4-methyl-3-thiosemicarbazone) (L1Me2H4) afforded the first complexes containing the diphenyllead(IV) moiety with bis(thiosemicarbazone) ligands. The new complexes show diverse structural characteristics depending on the ligand and the working conditions. Complexes [PbPh2Cl(L1H5)].3H2O (1) and [PbPh2Cl(L1Me2H3)] (3) are mononuclear species in which the ligands are partially deprotonated and the lead atom has a C2N2S2Cl environment in a distorted pentagonal bipyramid coordination geometry. Complex [PbPh(L1Me2H2)](2).2H2O (4) was also obtained, which contains two lead atoms in a binuclear structure with a C2N2S3 coordination sphere for each lead atom, since both dideprotonated ligands act as N2S2 chelate and as sulfur bridge. Reaction from L1H6, in the same conditions in which complex 4 was prepared, gave a mixture of products: the lead (II) complex [Pb(L1H4)]2 (2) and [PbPh3Cl]n. Reactions with the cyclic molecules 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]-triazine-3-thione (L2H2OCH3) and 5-methoxy-4-methyl-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]-triazine-3-thione (L2MeHOCH3) were also explored. In all the complexes, the ligands are deprotonated. The complexes [PbPh2(L2)2] (5) and [PbPh2(L2MeOCH3)2] (7) present the same characteristics. The X-ray structure of 5 shows a distorted octahedral geometry around the lead atom, with the ligand molecules acting as NS chelates, but the nitrogen bonded to the metal is different; one of the triazines shows a novel behavior, since the nitrogen atom of the new imine group formed is the one that is bonded to the lead center, being a good example of linkage isomerism. The complex [PbPh2Cl(L2)] (6), which was also isolated, could not be crystallized. All the complexes were characterized by elemental analysis, mass spectrometry, IR and 1H, 13C, and 207Pb NMR spectroscopy and some of them by X-ray diffraction studies.