Recommendations for the reference concentration of cadmium exposure based on a physiologically based toxicokinetic model integrated with a human respiratory tract model.

Cadmium (Cd) poses a significant threat to human health. However, chronic toxicity parameters for inhalation exposure are lacking, especially for noncritical systemic toxic effects. A physiologically based toxicokinetic (PBTK) model can be used to extrapolate toxicity parameters across various exposure routes. We combined a PBTK model with a human respiratory tract (HRT) model, which is applicable to the general population and capable of simulating the deposition and clearance processes of various airborne Cd compounds in the respiratory tract. Monte Carlo analysis was used to simulate the distribution of sensitive parameters to reflect individual variability. Validation based on datasets from general and occupational populations showed that the improved model had acceptable or better predictive performance, outperforming the original model with a 14.45 % decrease in the root mean square error (RMSE). Using this PBTK-HRT model, we extrapolated toxicity parameters from oral exposure to inhalation exposure for four systemic toxic effects with doseresponse relationships but no known inhalation toxicity parameters, and ultimately recommended reference concentrations (RfCs) for four diseases (chronic kidney disease: 0.01 µg/m3, osteoporosis: 0.01 µg/m3, stroke: 0.04 µg/m3, diabetes mellitus: 0.13 µg/m3), contributing to a comprehensive assessment of the health risks of Cd inhalation exposure. ENVIRONMENTAL IMPLICATION: Cadmium (Cd), a heavy metal, can cause lung cancer, chronic kidney disease, and osteoporosis and pose a significant threat to human health. We combined a physiologically based toxicokinetic (PBTK) model with a human respiratory tract (HRT) model to achieve better predictive performance and wider applicability; this model was subsequently employed for route-to-route extrapolation of toxicity parameters. Additionally, for the first time, we focused on multiple subchronic and chronic systemic toxic effects in addition to critical effects and derived their reference concentrations (RfCs), which can be used to assess the health risk of Cd inhalation exposure more comprehensively and accurately.

Massive traumatic epidural hematoma in a child with suprasellar arachnoid cyst and hydrocephalus.

We present a case of a child with a suprasellar arachnoid cyst and hydrocephalus who developed a massive traumatic epidural hematoma following a fall. This represents the first reported case of such a condition. The case is characterized by a progressive increase in hemorrhage leading to a massive hematoma, yet with relatively mild clinical symptoms. The hemorrhage originated from extensive blood seepage from the dura mater. Intraoperative hemostasis was challenging, and there was a large residual cavity of the epidural hematoma without repositioning of brain tissue after removal of the hematoma. Surgical measures such as extensive continuous compression hemostasis with Surgicel, the half-suspension technique, and continuous external drainage were employed to address these challenges. A second-stage surgery for the treatment of the suprasellar arachnoid cyst was performed 1.5 months after hematoma evacuation, utilizing neuroendoscopic ventriculocisternostomy (VCC). We recommend that for patients with traumatic brain injury and hydrocephalus, especially those with skull fractures or minimal intracranial hemorrhage, relying solely on clinical symptom observation and monitoring is insufficient. Timely and close monitoring with cranial CT is crucial for the early detection of progressive intracranial hemorrhage.

Tert-expressing cells contribute to salivary gland homeostasis and tissue regeneration after radiation therapy.

Salivary gland homeostasis and regeneration after radiotherapy depend significantly on progenitor cells. However, the lineage of submandibular gland (SMG) progenitor cells remains less defined compared with other normal organs. Here, using a mouse strain expressing regulated CreERT2 recombinase from the endogenous Tert locus, we identify a distinct telomerase-expressing (TertHigh) cell population located in the ductal region of the adult SMG. These TertHigh cells contribute to ductal cell generation during SMG homeostasis and to both ductal and acinar cell renewal 1 year after radiotherapy. TertHigh cells maintain self-renewal capacity during in vitro culture, exhibit resistance to radiation damage, and demonstrate enhanced proliferative activity after radiation exposure. Similarly, primary human SMG cells with high Tert expression display enhanced cell survival after radiotherapy, and CRISPR-activated Tert in human SMG spheres increases proliferation after radiation. RNA sequencing reveals upregulation of "cell cycling" and "oxidative stress response" pathways in TertHigh cells following radiation. Mechanistically, Tert appears to modulate cell survival through ROS levels in SMG spheres following radiation damage. Our findings highlight the significance of TertHigh cells in salivary gland biology, providing insights into their response to radiotherapy and into their use as a potential target for enhancing salivary gland regeneration after radiotherapy.

A novel trans-occipital catheter placement guide for ventriculoperitoneal shunts.

We have designed a novel device that facilitates the accurate placement of occipital ventricular catheters in ventriculoperitoneal shunt procedures. After 7 years of clinical use, this device has consistently demonstrated its simplicity, user-friendliness, and effectiveness. It enables both experienced surgeons and novices to confidently and accurately position the ventricular catheter to a satisfactory location.

Classification of the relationship between suprasellar arachnoid cyst and hydrocephalus based on treatment modalities: shunting versus neuroendoscopic approaches.

PURPOSE: Children diagnosed with suprasellar arachnoid cysts often concurrently have hydrocephalus. This study aims to classify the relationship between suprasellar arachnoid cysts and hydrocephalus, discussing surgical strategies-shunting or neuroendoscopic approaches-and their sequence, based on this classification. METHODS: A retrospective analysis was conducted on 14 patients diagnosed with suprasellar arachnoid cysts and hydrocephalus, treated surgically by the first author between January 2016 and December 2020. Clinical features, radiological findings, surgical strategies, and outcomes were reviewed. The classification of the relationship between the suprasellar arachnoid cysts and hydrocephalus was developed and illustrated with specific cases. Recommendations for future surgical management based on this classification are provided. RESULTS: We classified the relationship between suprasellar arachnoid cysts and hydrocephalus into three categories. SACH-R1, the direct type, represents cases where the cysts cause obstructive hydrocephalus. Here, neuroendoscopic ventriculocystocisternostomy (VCC) effectively treats both conditions. SACH-R2, the juxtaposed type, involves concurrent occurrences of cysts and hydrocephalus without a causative link. This is further subdivided into SACH-R2a, where acute progressive communicating hydrocephalus coexists with the cyst, initially managed with a ventriculoperitoneal shunt, followed by VCC upon stabilization of hydrocephalus; and SACH-R2b, where the cyst coexists with chronic stable communicating hydrocephalus, first addressed with VCC, followed by monitoring and potential secondary shunting if needed. Key factors differentiating SACH-R2a from SACH-R2b include the patient's age, imaging signs of fourth ventricle and cisterna magna enlargement, and the rapid progression or chronic stability and severity of hydrocephalus symptoms. SACH-R3, the reverse type, describes scenarios where shunting for hydrocephalus leads to the development or enlargement of the cyst, managed via neuroendoscopic VCC with precautions to prevent infections in existing shunt systems. CONCLUSION: The simultaneous presence of suprasellar arachnoid cysts and hydrocephalus requires a nuanced understanding of their complex relationship for optimal surgical intervention. The analysis and classification of their relationship are crucial for determining appropriate surgical approaches, including the choice and sequence of shunting and neuroendoscopic techniques. Treatment should be tailored to the specific type identified, rather than blindly opting for neuroendoscopy. Particularly for SACH-R2a cases, we recommend initial ventriculoperitoneal shunting.

Synergetic Manipulation Mechanism of Single-Atom M-N4 and M-OH (M = Mn, Fe, Co, Ni) Sites for Ozone Activation: Theoretical Prediction and Experimental Verification.

Carbon-based single-atom catalysts (SACs) have been gradually introduced in heterogeneous catalytic ozonation (HCO), but the interface mechanism of O3 activation on the catalyst surface is still ambiguous, especially the effect of a surface hydroxyl group (M-OH) at metal sites. Herein, we combined theoretical calculations with experimental verifications to comprehensively investigate the O3 activation mechanisms on a series of conventional SAC structures with N-doped nanocarbon substrates (MN4-NCs, where M = Mn, Fe, Co, Ni). The synergetic manipulation effect of the metal atom and M-OH on O3 activation pathways was paid particular attention. O3 tends to directly interact with the metal atom on MnN4-NC, FeN4-NC, and NiN4-NC catalysts, among which MnN4-NC has the best catalytic activity for its relatively lower activation energy barrier of O3 (0.62 eV) and more active surface-adsorbed oxygen species (Oads). On the CoN4-NC catalyst, direct interaction of O3 with the metal site is energetically infeasible, but O3 can be activated to generate Oads or HO2 species from direct or indirect participation of M-OH sites. The experimental results showed that 90.7 and 82.3% of total organic carbon (TOC) was removed within 40 min during catalytic ozonation of p-hydroxybenzoic acid with MnN4-NC and CoN4-NC catalysts, respectively. Phosphate quenching, catalyst characterization, and EPR measurement further supported the theoretical prediction. This contribution provides fundamental insights into the O3 activation mechanism on SACs, and the methods and ideals could be helpful for future studies of environmental catalysis.

Treatment of Complex Central Talar Fractures with Lateral Plate Combination with Medial Screw Fixation.

OBJECTIVE: The treatment of talar neck and/or body fractures is known to be difficult and challenging, with significant impact on the long-term functional outcome for the patient. The optimal management, including the choice of surgical approaches and implants, are still under constant discussion. The purpose of the study was to investigate the clinical effects of lateral mini-plate combined with medial lag screws for the treatment of complicated central talar fractures. METHODS: The data of eight patients with complex central talus fractures treated between June 2019 and January 2021 were retrospectively analyzed. There were six males and two females, ranging in age from 15 to 66 years, with an average age of 37.4 years. There were three cases on the left and five cases on the right. All fractures were comminuted, including talar neck with talar body fracture in seven cases and talar body comminuted with subluxation of subtalar joint in one case. All patients were treated with the anteromedial combined anterolateral approach, lateral talar mini-plate fixation and medial lag screw fixation. Fracture reduction quality, union time, and complications were recorded, and functional outcomes were evaluated using the American Orthopedic Foot & Ankle Society (AOFAS) scoring system. RESULTS: The time from injury to surgery was 1-6 days, with an average of 3.38 days. The follow-up period was 34-53 months (mean 44.88 months). All fractures healed with a mean healing time of 16.75 weeks (13-23 weeks). Anatomical reduction was observed in six cases and near in two cases. After operation, there was no loosening or breakage of implant, loss of fracture reduction, and irritation of skin and soft tissue by internal fixation. The average AOFAS score was 87.38 (48-100), with excellent five cases, good two cases and poor one case, and the excellent and good rate was 87.5%. Superficial skin necrosis in one surgical incision healed after dressing exchange. No deep infection occurred. One case (1/8, 12.5%) developed avascular necrosis of the talus without collapse. Posttraumatic arthritis was found in four cases (4/8, 50%). CONCLUSION: The utilization of lateral mini-plates in combination with medial screws for treating complex central talar fractures results in satisfactory reduction and stable fixation, mitigating complications associated with poor reduction. However, due to the absence of an anatomical mini-plate, pre-contouring is necessary when applying the lateral plate. This demands a surgeon's thorough familiarity with the anatomical morphology of the talus and proficiency in surgical techniques. Posttraumatic arthritis is the most common complication of complex central talar fractures.

Bone flap binding and transposition: a method for bone reconstruction in cranial burst fractures and early-stage growing skull fractures.

PURPOSE: To introduce a method of cranial bone reconstruction for cranial burst fractures and early-stage growing skull fractures, named bone flap binding and transposition. METHODS: Cranial burst fractures, severe head injuries predominantly observed in infants, are characterized by widely diastatic skull fractures coupled with acute extracranial cerebral herniation beneath an intact scalp through ruptured dura mater. These injuries can develop into growing skull fractures. This study included two cases to illustrate the procedure, with a particular focus on the bone steps in managing these conditions. The medical history, clinical presentation, surgical procedures, and postoperative follow-up were retrospectively studied. The details of the surgical procedure were described. RESULTS: The method of bone reconstruction, named bone flap binding and transposition, was applied after the lacerated dural repair. Two bone pieces were combined to eliminate the diastatic bone defect and then fixed by an absorbable cranial fixation clip and bound by sutures. The combined bone flap was repositioned into the bone window, completely covering the area of the original dural laceration. Subsequently, the bone defect was transferred to the area of normal dura. The postoperative courses for the two infants were uneventful. Follow-up CT scans revealed new bone formation at the previous bone defect and no progressive growing skull fracture. The major cranial defects had disappeared, leaving only small residual defects at the corners of the skull bone window, which required further recovery and did not affect the solidity of the skull. CONCLUSION: Bone flap binding and transposition provide a straightforward, cost-effective, and reliable method for cranial bone reconstruction of cranial burst fractures and early-stage growing skull fractures. This method has taken full advantage of the small infant's dura osteogenic potential without the need for artificial or metallic bone repair materials. The effectiveness of the method needs further validation with more cases in the future.

Selective Recovery of Cathode Materials from Spent Lithium-Ion Battery Material with a Near-Room-Temperature Separation.

Effective separation of cathode materials from the current collector is a critical step in recycling a spent lithium-ion battery (LIB). This typically necessitates the decomposition or dissolution of the organic binder, poly(vinylidene fluoride) (PVDF), to achieve efficient recovery of cathode materials. However, this process requires a high decomposition temperature, typically between 400 and 600 °C, and can lead to side reactions, such as current collector oxidation/brittleness, decomposition of cathode materials, and formation of metal fluorides. In this study, we propose that non-thermal plasma (NTP) treatment can be used to achieve an extremely high separation of cathode materials and aluminum current collector at near room temperature. Instead of relying on PVDF decomposition, which requires high temperatures, PVDF can be deactivated by partially breaking down long molecular chains with appropriate NTP conditions. With a total treatment time of around 2000 s and an environmental temperature of approximately 80 °C, minor side reactions can be avoided. The separation rate can reach up to 95.69%, and high-quality cathode materials can be obtained with only 0.02 wt % aluminum impurity content. This research could potentially offer a new approach toward minimizing recycling steps and reducing energy consumption in the recycling of spent LIBs. It could also be extended to the recovery of a broader range of electronic wastes.

Control priority based on source-specific DALYs of PM2.5-bound heavy metals by PMF-PSCF-IsoSource model in urban and suburban Beijing.

To determine the priority control sources, an approach was proposed to evaluate the source-specific contribution to health risks from inhaling PM2.5-bound heavy metals (PBHMs). A total of 482 daily PM2.5 samples were collected from urban and suburban areas of Beijing, China, between 2018 and 2019. In addition to the PMF-PSCF model, a Pb isotopic IsoSource model was built for more reliable source apportionment. By using the comprehensive indicator of disability-adjusted life years (DALYs), carcinogenic and noncarcinogenic health risks could be compared on a unified scale. The study found that the annual average concentrations of the total PBHMs were significantly higher in suburban areas than in urban areas, with significantly higher concentrations during the heating season than during the nonheating season. Comprehensive dust accounted for the largest contribution to the concentration of PBHMs, while coal combustion contributed the most to the DALYs associated with PBHMs. These results suggest that prioritizing the control of coal combustion could effectively reduce the disease burden associated with PBHMs, leading to notable public health benefits.

AS-NeSt: A Novel 3D Deep Learning Model for Radiation Therapy Dose Distribution Prediction in Esophageal Cancer Treatment With Multiple Prescriptions.

PURPOSE: Implementing artificial intelligence technologies allows for the accurate prediction of radiation therapy dose distributions, enhancing treatment planning efficiency. However, esophageal cancers present unique challenges because of tumor complexity and diverse prescription types. Additionally, limited data availability hampers the effectiveness of existing artificial intelligence models. This study developed a deep learning model, trained on a diverse data set of esophageal cancer prescriptions, to improve dose prediction accuracy. METHODS AND MATERIALS: We retrospectively collected data from 530 patients with esophageal cancer, including single-target and simultaneous integrated boost prescriptions, for model building. The proposed Asymmetric ResNeSt (AS-NeSt) model features novel 3-dimensional (3D) ResNeSt blocks and an asymmetrical architecture. We constructed a loss function targeting global and local doses and validated the model's performance against existing alternatives. Model-assisted experiments were used to validate its clinical benefits. RESULTS: The AS-NeSt model maintained an absolute prediction error below 5% for each dosimetric metric. The average Dice similarity coefficient for isodose volumes was 0.93. The model achieved an average relative prediction error of 2.02%, statistically lower than Hierarchically Densely Connected U-net (4.17%), DoseNet (2.35%), and Densely Connected Network (3.65%). It also demonstrated significantly fewer parameters and shorter prediction times. Clinically, the AS-NeSt model raised physicians' ability to accurately preassess appropriate treatment methods before planning from 95.24% to 100%, reduced planning time by over 61% for junior dosimetrists and 52% for senior dosimetrists, and decreased both inter- and intra-dosimetrist discrepancies by more than 50%. CONCLUSIONS: The AS-NeSt model, developed with innovative 3D ResNeSt blocks and an asymmetrical encoder-decoder structure, has been validated using clinical esophageal cancer patient data. It accurately predicts 3D dose distributions for various prescriptions, including simultaneous integrated boost, showing potential to improve the management of esophageal cancer treatment in a clinical setting.

Comparison of different internal fixation implants in the treatment of talar neck fractures: A finite element analysis.

OBJECTIVES: This study aimed to analyze the biomechanics of cannulated screws (CS) with or without a lateral locking plate (LLP) in talar neck fractures through a finite element analysis. PATIENTS AND METHODS: The computed tomography image of the talus from a healthy volunteer (adult male) was used to reconstruct a three-dimensional talar model. The method for fixing talar neck fractures with CS and an LLP was planned using computer-aided design software. Afterward, the three-dimensional models of comminuted talar neck fractures were used to simulate fixation with anteroposterior parallel dual CS, single CS+LLP, and dual CS+LLP. Finally, finite element analysis was carried out to compare the outcomes of dual CS+LLP to those of single CS+LLP and to those of using dual CS alone. The displacement and von Mises stress values of the three groups with different internal fixation were analyzed. RESULTS: For a simple talar neck fracture, the lowest amount of displacement was obtained with CS+LLP (0.407 mm), while dual CS (0.459 mm) showed the highest amount of total displacement; the lowest amount of peak stresses was obtained with CS+LLP (5.38 MPa), while dual CS (8.749 MPa) showed the highest amount of total peak stresses. For a comminuted talar neck fracture, the lowest amount of displacement was obtained with CS+LLP (0.398 mm), while dual CS (0.408 mm) showed the highest amount of total displacement; the lowest amount of peak stresses was obtained with CS+LLP (129.9 MPa), while dual CS (205.9 MPa) showed the highest amount of peak stresses. CONCLUSION: Compared to the other two groups, the dual CS+LLP group had better biomechanics properties in the displacement and stress peak of the talus and implant. Thus, the use of dual CS+LLP fixation is recommended for the surgical treatment of comminuted talar neck fractures.

Estimating the geographical patterns and health risks associated with PM2.5-bound heavy metals to guide PM2.5 control targets in China based on machine-learning algorithms.

PM2.5 is the main component of haze, and PM2.5-bound heavy metals (PBHMs) can induce various toxic effects via inhalation. However, comprehensive macroanalyses on large scales are still lacking. In this study, we compiled a substantial dataset consisting of the concentrations of eight PBHMs, including As, Cd, Cr, Cu, Mn, Ni, Pb and Zn, across different cities in China. To improve prediction accuracy, we enhanced the traditional land-use regression (LUR) model by incorporating emission source-related variables and employing the best-fitted machine-learning algorithm, which was applied to predict PBHM concentrations, analyze geographical patterns and assess the health risks associated with metals under different PM2.5 control targets. Our model exhibited excellent performance in predicting the concentrations of PBHMs, with predicted values closely matching measured values. Noncarcinogenic risks exist in 99.4% of the estimated regions, and the carcinogenic risks in all studied regions of the country are within an acceptable range (1 × 10-5-1 × 10-6). In densely populated areas such as Henan, Shandong, and Sichuan, it is imperative to control the concentration of PBHMs to reduce the number of patients with cancer. Controlling PM2.5 effectively decreases both carcinogenic and noncarcinogenic health risks associated with PBHMs, but still exceed acceptable risk level, suggesting that other important emission sources should be given attention.

Unexpectedly Enhanced Organics Removal in Persulfate Oxidation with High Concentration of Sulfate: The Origin and the Selectivity.

Massive anions in high saline wastewater are primary factors that restricted the efficiency of pollutant degradation in advanced oxidation processes (AOPs). Herein, we reported the influence laws of different anions at high concentration on the electron-transfer process in the activation of persulfate, and especially, the sulfate anion exhibited the excellent promotion effect. Depending on the ionic charge, polarizability, and size, the anions exerted diverse effects on the dispersed phase and zeta potential of carbonaceous catalysts, which further embodied in the removal of pollutants. Based on the differences of reaction rate constant in water solution and high saline solution, the order was ClO4- < NO3- < Cl- < SO42- < CO32-, obeying the Hofmeister series. The enhancement of the sulfate anion was widely confirmed with different carbonaceous catalysts and pollutants with various structures. It could be attributed to the higher oxidation capacity, the faster interfacial electron transfer, and the better catalyst dispersion in the high sulfate environment. On the other hand, the decrease of zeta potential of the catalyst induced by sulfate reinforced the electrostatic attraction or repulsion with pollutants, which caused the selectivity of the sulfate promotion effect. Overall, this study provides new insights into the mechanism of influence of anions on AOPs, which refreshed the cognition of the role of sulfate on pollutant degradation, and helps guide the treatment design of high salinity wastewater.

Degradation of Sulfamethoxazole by Manganese(IV) Oxide in the Presence of Humic Acid: Role of Stabilized Semiquinone Radicals.

In this work, we demonstrate for the first time the abatement of sulfamethoxazole (SMX) induced by stabilized ortho-semiquinone radicals (o-SQ•-) in the MnO2-mediated system in the presence of humic acid. To evaluate the performance of different MnO2/mediator systems, 16 mediators are examined for their effects on MnO2 reactions with SMX. The key role of the bidentate Mn(II)-o-SQ• complex and MnO2 surface in stabilizing SQ•- is revealed. To illustrate the formation of the Mn(II)-o-SQ• complex, electron spin resonance, cyclic voltammetry, and mass spectra were used. To demonstrate the presence of o-SQ• on the MnO2 surface, EDTA was used to quench Mn(II)-o-SQ•. The high stability of o-SQ•- on the MnO2 surface is attributed to the higher potential of o-SQ•- (0.9643 V) than the MnO2 surface (0.8598 V) at pH 7.0. The SMX removal rate constant by different stabilized o-SQ• at pH 7.0 ranges from 0.0098 to 0.2252 min-1. The favorable model is the rate constant ln (kobs, 7.0) = 6.002EHOMO(o-Qred) + 33.744(ELUMO(o-Q) - EHOMO(o-Qred)) - 32.800, whose parameters represent the generation and reactivity of o-SQ•, respectively. Moreover, aniline and cystine are competitive substrates for SMX in coupling o-SQ•-. Due to the abundance of humic constituents in aquatic environments, this finding sheds light on the low-oxidant-demand, low-carbon, and highly selective removal of sulfonamide antibiotics.

Galectin-1 Mediates Chronic STING Activation in Tumors to Promote Metastasis through MDSC Recruitment.

The immune system plays a crucial role in the regulation of metastasis. Tumor cells systemically change immune functions to facilitate metastatic progression. Through this study, we deciphered how tumoral galectin-1 (Gal1) expression shapes the systemic immune environment to promote metastasis in head and neck cancer (HNC). In multiple preclinical models of HNC and lung cancer in immunogenic mice, Gal1 fostered the establishment of a premetastatic niche through polymorphonuclear myeloid-derived suppressor cells (PMN-MDSC), which altered the local microenvironment to support metastatic spread. RNA sequencing of MDSCs from premetastatic lungs in these models demonstrated the role of PMN-MDSCs in collagen and extracellular matrix remodeling in the premetastatic compartment. Gal1 promoted MDSC accumulation in the premetastatic niche through the NF-κB signaling axis, triggering enhanced CXCL2-mediated MDSC migration. Mechanistically, Gal1 sustained NF-κB activation in tumor cells by enhancing stimulator of interferon gene (STING) protein stability, leading to prolonged inflammation-driven MDSC expansion. These findings suggest an unexpected protumoral role of STING activation in metastatic progression and establish Gal1 as an endogenous-positive regulator of STING in advanced-stage cancers. SIGNIFICANCE: Galectin-1 increases STING stability in cancer cells that activates NF-κB signaling and CXCL2 expression to promote MDSC trafficking, which stimulates the generation of a premetastatic niche and facilitates metastatic progression.

Correlating Rate-Dependent Transition Metal Dissolution between Structure Degradation in Li-Rich Layered Oxides.

Understanding the mechanism of the rate-dependent electrochemical performance degradation in cathodes is crucial to developing fast charging/discharging cathodes for Li-ion batteries. Here, taking Li-rich layered oxide Li1.2 Ni0.13 Co0.13 Mn0.54 O2 as the model cathode, the mechanisms of performance degradation at low and high rates are comparatively investigated from two aspects, the transition metal (TM) dissolution and the structure change. Quantitative analyses combining spatial-resolved synchrotron X-ray fluorescence (XRF) imaging, synchrotron X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques reveal that low-rate cycling leads to gradient TM dissolution and severe bulk structure degradation within the individual secondary particles, and especially the latter causes lots of microcracks within secondary particles, and becomes the main reason for the fast capacity and voltage decay. In contrast, high-rate cycling leads to more TM dissolution than low-rate cycling, which concentrates at the particle surface and directly induces the more severe surface structure degradation to the electrochemically inactive rock-salt phase, eventually causing a faster capacity and voltage decay than low-rate cycling. These findings highlight the protection of the surface structure for developing fast charging/discharging cathodes for Li-ion batteries.

[Source Apportionment and Pollution Assessment of Soil Heavy Metal Pollution Using PMF and RF Model: A Case Study of a Typical Industrial Park in Northwest China].

Based on the concentration data of seven heavy metal elements[As, Cd, Cu, Pb, Hg, Ni, and Cr(Ⅵ)] in the surface soil of a typical industrial park in northwest China, the characteristics of heavy metal pollution in the industrial park were analyzed, and the ecological risk and pollution were evaluated using the potential ecological risk index and the index of geo-accumulation. The positive matrix factorization (PMF) model and random forest (RF) model were used for quantitative source analysis, and the emission data of sampling enterprises and empirical data of the source emission component spectrum were combined to identify the characteristic elements and determine the emission source category. The results showed that the heavy metals at all sampling points in the park did not exceed the second-class screening value of construction land in the soil pollution risk control standard for construction land (GB 36600-2018). However, compared with the local soil background values, five elements, excluding As and Cr, were enriched in different degrees, presenting slight pollution and moderate ecological risk (RI=250.04). Cd and Hg were the main risk elements of the park. The results of source analysis showed that the five main sources of pollution were fossil fuel combustion and chemical production sources (33.73%, 9.71%, total source contribution rate of PMF and RF, respectively; the same below), natural sources and waste residue landfill (32.40%, 40.80%), traffic emissions (24.49%, 48.08%), coal burning and non-ferrous metal smelting (5.43%, 0.11%), and electroplating and ore smelting (3.95%, 1.30%). The simulation R2 of the total variable of the two models were above 0.96, indicating that the models could predict heavy metals well. However, considering the actual situation of the number of enterprises in the park and roading density, the main pollution sources of soil heavy metals in the park should be industrial sources, and the simulation results of the PMF model were closer to the actual situation in the park.

Comprehensive effect of water matrix on catalytic ozonation of chloride contained saline wastewater.

Chloride ion (Cl-) is one of the most common anions in wastewater and saline wastewater, but its elusive effects on organics degradation are not clear yet in many cases. In this paper, the effect of Cl- on organic compounds degradation is intensively studied in catalytic ozonation of different water matrix. It was found that the effect of Cl- is almost completely reflected by transforming ·OH to reactive chlorine species (RCS), which is simultaneously competitive with organics degradation. The competition between organics and Cl- for ·OH directly determines the ratio of their consumption rate of ·OH, which depends on their concentration and reactivity with ·OH. Especially, the concentration of organics and solution pH may change greatly during organics degradation process, which will correspondingly influence the transformation rate of ·OH to RCS. Therefore, the effect of Cl- on organics degradation is not immutable, and may dynamically change. As the reaction product between Cl- and ·OH, RCS was also expected to affect the degradation of organics. But we found that Cl· had no significant contribution to the degradation of organics in catalytic ozonation, which may due to its reaction with ozone. Catalytic ozonation of a series of benzoic acid (BA) with different substituents in chloride contained wastewater was also investigated, and the results showed that the electron-donating substituents can weaken the inhibition of Cl- on BAs degradation, because they increase the reactivity of organics with ·OH, O3 and RCS.