Lignin-Derived Lightweight Carbon Aerogels for Tunable Epsilon-Negative Response.

Electromagnetic (EM) metamaterials have garnered considerable attention due to their capacity to achieve negative parameters, significantly influencing the integration of natural materials with artificially structural media. The emergence of carbon aerogels (CAs) offers an opportunity to create lightweight EM metamaterials, notable for their promising EM shielding or absorption effects. This paper introduces an efficient, low-cost method for fabricating CAs without requiring stringent drying conditions. By finely tuning the ZnCl2/lignin ratio, the porosity is controlled in CAs. This control leads to an epsilon-negative response in the radio-frequency region, driven by the intrinsic plasmonic state of the 3D carbon network, as opposed to traditional periodic building blocks. This approach yields a tunable and weakly epsilon-negative response, reaching an order of magnitude of -103 under MHz frequencies. Equivalent circuit analysis highlights the inductive characteristics of CAs, correlating their significant dielectric loss at low frequencies. Additionally, EM simulations are performed to evaluate the distribution of the electric field vector in epsilon-negative CAs, showcasing their potential for effective EM shielding. The lignin-derived, lightweight CAs with their tunable epsilon-negative response hold promise for pioneering new directions in EM metamaterials and broadening their application in diverse extreme conditions.

Magnetic-stirring-enhanced mechanical amorphous dispersion extraction for the hydrophobic phytochemical constituents using an aqueous solution from a medicinal plant.

A method involving chitosan-assisted magnetic-stirring-enhanced mechanical amorphous dispersion extraction was developed and utilized to extract hydrophobic anthraquinones from Rhei Radix et Rhizoma prior to ultrahigh performance liquid chromatography analysis. Incorporating natural chitosan as a dispersant facilitated the extraction of hydrophobic anthraquinones using purified water, considerably enhancing the eco-friendliness of the extraction methodology. To optimize extraction efficiency, an extensive evaluation of the crucial parameters influencing rhubarb yield was conducted. Furthermore, a response surface methodology was applied to optimize the extraction conditions. Under these optimized conditions, the method exhibited linearity ranges of 0.1-100 µg/mL, with correlation coefficients between 0.9990 and 0.9998. The method's intraday (n = 6) and interday (n = 6) precision levels were maintained at ≤3.58%, which was considered to be within acceptable limits. The computed detection and quantification limits were 16.54-24.60 and 54.91-82.04 ng/mL, respectively. Consequently, this optimized method was effectively employed to extract five specific compounds (aloe-emodin, emodin, rhein, chrysophanol, and physcion) from Rhei Radix et Rhizoma, achieving recoveries ranging from 86.43% to 102.75%.

Potential gap in understanding cyanoHABs: Light-dependent morphological variations in colonial cyanobacterium Microcystis.

Colony formation is a crucial characteristic of Microcystis, a cyanobacterium known for causing cyanobacterial harmful algal blooms (cyanoHABs). It has been observed that as Microcystis colonies grow larger, they often become less densely packed, which correlates with a decrease in light penetration. The objective of this study was to investigate the effects of light limitation on the morphological variations in Microcystis, particularly in relation to the crowded cellular environment. The results indicated that when there was sufficient light (transmittance = 100 %) to support a growth rate of 0.11±0.01 day-1, a significant increase in colony size was found, from 466±15 µm to 1030±111 µm. However, under light limitation (transmittance = 50 % - 1 %) where the growth rate was lower than 0, there was no significant improvement in colony size. Microcystis in the light limitation groups exhibited a loose cell arrangement and even the presence of holes or pores within the colony, confirming the negative correlation between colony size and cell arrangement. This pattern is driven by regional differences in growth within the colony, as internal cells have a significantly lower frequency of division compared to peripheral cells, due to intra-colony self-shading (ICSS). The research demonstrates that Microcystis can adjust its cell arrangement to avoid excessive self-shading, which has implications for predicting and controlling cyanoHABs. These findings also contribute to the understanding of cyanobacterial variations and can potentially inform future research on the diverse phycosphere.

Coffee, tea, and cocoa in obesity prevention: Mechanisms of action and future prospects.

Obesity, a major public health problem, causes numerous complications that threaten human health and increase the socioeconomic burden. The pathophysiology of obesity is primarily attributed to lipid metabolism disorders. Conventional anti-obesity medications have a high abuse potential and frequently deliver insufficient efficacy and have negative side-effects. Hence, functional foods are regarded as effective alternatives to address obesity. Coffee, tea, and cocoa, three widely consumed beverages, have long been considered to have the potential to prevent obesity, and several studies have focused on their intrinsic molecular mechanisms in past few years. Therefore, in this review, we discuss the mechanisms by which the bioactive ingredients in these three beverages counteract obesity from the aspects of adipogenesis, lipolysis, and energy expenditure (thermogenesis). The future prospects and challenges for coffee, tea, and cocoa as functional products for the treatment of obesity are also discussed, which can be pursued for future drug development and prevention strategies against obesity.

Effects of Indocyanine Green (ICG) Imaging-Assisted Cholecystectomy on Intraoperative and Postoperative Complications: A meta-Analysis.

BACKGROUND: Accurate recognition of Calot's triangle during cholecystectomy is important in preventing intraoperative and postoperative complications. The use of indocyanine green (ICG) fluorescence imaging has become increasingly prevalent in cholecystectomy procedures. Our study aimed to evaluate the specific effects of ICG-assisted imaging in reducing complications. MATERIALS AND METHODS: A comprehensive search of databases including PubMed, Web of Science, Europe PMC, and WANFANGH DATA was conducted to identify relevant articles up to July 5, 2023. Review Manager 5.3 software was applied to statistical analysis. RESULTS: Our meta-analysis of 14 studies involving 3576 patients compared the ICG group (1351 patients) to the control group (2225 patients). The ICG group had a lower incidence of postoperative complications (4.78% vs 7.25%; RR .71; 95%CI: .54-.95; P = .02). Bile leakage was significantly reduced in the ICG group (.43% vs 2.02%; RR = .27; 95%CI: .12-.62; I2 = 0; P = .002), and they also had a lower bile duct drainage rate (24.8% vs 31.8% RR = .64, 95% CI: .44-.91, P = .01). Intraoperative complexes showed no statistically significant difference between the 2 groups (1.16% vs 9.24%; RR .17; 95%CI .03-1.02), but the incidence of intraoperative bleeding is lower in the ICG group. CONCLUSION: ICG fluorescence imaging-assisted cholecystectomy was associated with a range of benefits, including a lower incidence of postoperative complications, decreased rates of bile leakage, reduced bile duct drainage, fewer intraoperative complications, and reduced intraoperative bleeding.

Direct and rapid thermal shock for recycling spent graphite in lithium-ion batteries.

Due to the rapid increase in the number of spent lithium-ion batteries, there has been a growing interest in the recovery of degraded graphite. In this work, a rapid thermal shock (RTS) strategy is proposed to regenerate spent graphite for use in lithium-ion batteries. The results of structural and morphological characterization demonstrate that the graphite is well regenerated by the RTS process. Additionally, an amorphous carbon layer forms and coats onto the surface of the graphite, contributing to excellent rate performance. The regenerated graphite (RG-1000) displays excellent rate performance, with capacities of 413 mAh g-1 at 50 mA g-1 and 102.1 mAh g-1 at 1000 mA g-1, respectively. Furthermore, it demonstrates long-term cycle stability, maintaining a capacity of 80 mAh g-1 at 1000 mA g-1 with a capacity retention of 78.4 % after 600 cycles. This RTS method enables rapid and efficient regeneration of spent graphite anodes for lithium-ion batteries, providing a facile and environmentally friendly strategy for their direct regeneration.

Sex- and Age-Specific Prevalence of Osteopenia and Osteoporosis: Sampling Survey.

BACKGROUND: Osteopenia and osteoporosis are posing a long-term influence on the aging population's health contributing to a higher risk of mortality, loss of autonomy, hospitalization, and huge health system costs and social burden. Therefore, more pertinent data are needed to demonstrate the current state of osteoporosis. OBJECTIVE: This sampling survey seeks to assess the trends in the prevalence of osteopenia and osteoporosis in a Chinese Han population. METHODS: A community-based cross-sectional study involving 16,377 participants used a multistage sampling method. Bone mineral density was measured using the quantitative ultrasonic densitometry. Student t test and Mann-Whitney U test were used to test the difference between normally and nonnormally distributed quantitative variables between male and female participants. A chi-square (χ2) test was used to compare categorized variables. Stratified analysis was conducted to describe the prevalence rates of osteoporosis (T score ≤-2.5) and osteopenia (T score -2.5 to -1.0) across age, sex, calcium intake, and menopause. A direct standardization method was used to calculate the age-standardized prevalence rates of osteoporosis and osteopenia. T-score was further categorized into quartiles (T1-T4) by age- and sex-specified groups. RESULTS: The prevalence rates of osteopenia and osteoporosis were 40.5% (6633/16,377) and 7.93% (1299/16,377), respectively, and the age-standardized prevalence rates were 27.32% (287,877,129.4/1,053,861,940) and 3.51% (36,974,582.3/1,053,861,940), respectively. There was an increase in osteopenia and osteoporosis prevalence from 21.47% (120/559) to 56.23% (754/1341) and 0.89% (5/559) to 17.23% (231/1341), respectively, as age increased from 18 years to 75 years old. The prevalence rates of osteopenia and osteoporosis were significantly higher in female participants (4238/9645, 43.94% and 1130/9645, 11.72%) than in male participants (2395/6732, 35.58% and 169/6732, 2.51%; P<.001), and in postmenopausal female participants (3638/7493, 48.55% and 1053/7493, 14.05%) than in premenopausal female participants (538/2026, 26.55% and 53/2026, 2.62%; P<.001). In addition, female participants with a history of calcium intake had a lower osteoporosis prevalence rate than female participants without any history of calcium intake in all age groups (P=.004). From low quartile to high quartile of T-score, the prevalence of diabetes mellitus (752/4037, 18.63%; 779/4029, 19.33%; 769/3894, 19.75%; and 869/3879, 22.4%) and dyslipidemia (2228/4036, 55.2%; 2304/4027, 57.21%; 2306/3891, 59.26%; and 2379/3878, 61.35%) were linearly increased (P<.001), while the prevalence of cancer (112/4037, 2.77%; 110/4029, 2.73%; 103/3894, 2.65%; and 77/3879, 1.99%) was decreased (P=.03). CONCLUSIONS: Our data imply that as people age, osteopenia and osteoporosis are more common in females than in males, particularly in postmenopausal females than in premenopausal females, and bone mineral density significantly affects the prevalence of chronic diseases. These findings offer information that can be applied to intervention programs meant to prevent or lessen the burden of osteoporosis in China.

Etching of Ag nanoparticles triggered bidirectional regulation for electrochemiluminescence ratiometric immunoassay.

A highly efficient ratiometric electrochemiluminescence (ECL) immunoassay was explored by bidirectionally regulating the ECL intensity of two luminophors. The immunoassay was conducted in a split-type mode consisting of an ECL detection procedure and a sandwich immunoreaction. The ECL detection was executed using a dual-disk glassy carbon electrode modified with two potential-resolved luminophors (g-C3N4-Ag and Ru-MOF-Ag nanocomposites), and the sandwich immunoreaction using glucose oxidase (GOx)-modified SiO2 nanospheres as labels was carried out in a 96-well plate. The Ag nanoparticles (NPs) acted as bifunctional units both for triggering the resonance energy transfer (RET) with g-C3N4 and for accelerating the electron transfer rate of the Ru-MOF-Ag ECL reaction. When the H2O2 catalyzed by GOx in the 96-well plate was transferred to the dual-disk glass carbon electrode, the doped Ag NPs in the two luminophors could be etched, thus destroying the RET between C3N4 and the accelerated reaction to Ru-MOF, resulting in an opposite trend in the ECL signal outputted from the dual disks. Using the ratio of the two signals for quantification, the constructed immunosensor for a model target, i.e. myoglobin, exhibited a low detection limit of 4.7 × 10-14 g/mL. The ingenious combination of ECL ratiometry, bifunctional Ag NPs, and a split-type strategy effectively reduces environmental and human errors, offering a more precise and sensitive analysis for complex samples.

Rare earth elements induced electronic engineering in Rh cluster toward efficient alkaline hydrogen evolution reaction.

The unique electronic and crystal structures of rare earth metals (RE) offer promising opportunities for enhancing the hydrogen evolution reaction (HER) properties of materials. In this work, a series of RE (Sm, Nd, Pr and Ho)-doped Rh@NSPC (NSPC stands for N, S co-doped porous carbon nanosheets) with sizes less than 2 nm are prepared, utilizing a simple, rapid and solvent-free joule-heat pyrolysis method for the first time. The optimized Sm-Rh@NSPC achieves HER performance. The high-catalytic performance and stability of Sm-Rh@NSPC are attributed to the synergistic electronic interactions between Sm and Rh clusters, leading to an increase in the electron cloud density of Rh, which promotes the adsorption of H+, the dissociation of Rh-H bonds and the release of H2. Notably, the overpotential of the Sm-Rh@NSPC catalyst is a mere 18.1 mV at current density of 10 mAcm-2, with a Tafel slope of only 15.2 mV dec-1. Furthermore, it exhibits stable operation in a 1.0 M KOH electrolyte at 10 mA cm-2 for more than 100 h. This study provides new insights into the synthesis of composite RE hybrid cluster nanocatalysts and their RE-enhanced electrocatalytic performance. It also introduces fresh perspectives for the development of efficient electrocatalysts.

Transcranial Direct Current Stimulation for Anxiety During Laparoscopic Colorectal Cancer Surgery: A Randomized Clinical Trial.

Importance: Perioperative anxiety is prevalent among patients undergoing surgical treatment of cancer and often influences their prognosis. Transcranial direct current stimulation (tDCS) has shown potential in the treatment of various anxiety-related disorders, but data on the impact of tDCS on perioperative anxiety are limited. Objective: To evaluate the effect of tDCS in reducing perioperative anxiety among patients undergoing laparoscopic colorectal cancer (CRC) resection. Design, Setting, And Participants: This randomized clinical trial was conducted from March to August 2023 at the Affiliated Hospital of Xuzhou Medical University. Patients aged 18 years or older undergoing elective laparoscopic radical resection for CRC were randomly assigned to either the active tDCS group or the sham tDCS group. Intention-to-treat data analysis was performed in September 2023. Interventions: Patients were randomly assigned to receive 2 sessions of either active tDCS or sham tDCS over the left dorsolateral prefrontal cortex on the afternoon of the day before the operation and in the morning of the day of operation. Main Outcomes and Measures: The main outcome was the incidence of perioperative anxiety from the day of the operation up to 3 days after the procedure, as measured using the Hospital Anxiety and Depression Scale-Anxiety (HADS-A) subscale (range: 0-21, with higher scores indicating more anxiety). Secondary outcomes included postoperative delirium (assessed by the Confusion Assessment Method or Confusion Assessment Method intensive care unit scale); pain (assessed by the 10-point Numeric Rating Scale [NRS], with scores ranging from 0 [no pain] to 10 [worst pain]); frailty (assessed by the Fatigue, Resistance, Ambulation, Illness and Loss of Weight [FRAIL] Index, with scores ranging from 0 [most robust] to 5 [most frail]; and sleep quality (assessed by the Pittsburgh Sleep Quality Index [PSQI], with scores ranging from 0 to 21 and higher scores indicating worse sleep quality) after the 2 sessions of the tDCS intervention. Results: A total of 196 patients (mean [SD] age, 63.5 [11.0] years; 124 [63.3%] men) were recruited and randomly assigned to the active tDCS group (98 patients) or the sham tDCS group (98 patients). After the second tDCS intervention on the day of the operation, the incidence of perioperative anxiety was 38.8% in the active tDCS group and 70.4% in the sham tDCS group (relative risk, 0.55 [95% CI, 0.42-0.73]; P < .001). Patients in the active tDCS group vs the sham tDCS group were less likely to have postoperative delirium (8.2% vs 25.5%) and, at 3 days after the operation, had lower median (IQR) pain scores (NRS, 1.0 [1.0-1.0] vs 2.0 [2.0-2.0]), better median (IQR) sleep quality scores (PSQI, 10.5 [10.0-11.0] vs 12.0 [11.0-13.0]), and lower median (IQR) FRAIL Index (2.0 [1.0-2.0] vs 2.0 [2.0-3.0]). Conclusions and Relevance: Findings of this randomized clinical trial indicate that administration of 2 preoperative sessions of tDCS was associated with a decreased incidence of perioperative anxiety in patients undergoing elective CRC resection. Active tDCS was also associated with better anxiety scores, pain levels, and sleep quality as well as reduced postoperative delirium and frailty. The findings suggest that tDCS may be a novel strategy for improving perioperative anxiety in patients undergoing CRC resection. Trial Registration: Chinese Clinical Trial Register Identifier: ChiCTR2300068859.

Comparison of the efficacy of the convex side short fusion combined with concave side single growing rod technique and the traditional bilateral growing rod technique in the treatment of early onset scoliosis.

OBJECTIVES: The application of a growing rod technique can retain the growth and development potential of the spine and thorax while controlling the progression of scoliosis deformity. Theoretically, convex side short fusion combined with a concave side single growing rod technique can significantly reduce the asymmetric growth of the spine in the vertex region in most patients. However, the final clinical outcome of various techniques is yet to be clearly determined and compared between studies. Therefore, we compared the efficacy of these two growing rod techniques in treating early onset scoliosis. METHODS: In a retrospective study of 152 EOS patients seen between 2013.1 and 2019.12, 36 cases of EOS patients were selected for inclusion. Among the 36 cases, 11 cases were treated with convex side short fusion combined with a concave side single growing rod technique, group (A) The remaining 25 cases were treated with traditional bilateral growing rod technique, group (B) Age, gender, etiology, follow-up time, Cobb angle of main curve, T1-S1 height, coronal trunk shift, sagittal vertical axis (SVA), Cobb angle of thoracic kyphosis at last follow-up, and Cobb angle at proximal junction kyphosis of the first and last post-operation follow-up were recorded. In addition, internal fixation related complications, infection, nervous system complications were recorded as well. RESULTS: There was no statistically significant difference between group A and group B in preoperative age, Cobb angle of main curve, coronal trunk shift, T1-S1 height, SVA, Cobb angle of thoracic kyphosis (p > 0.05). However, at the last follow-up (Group A, mean 4.4 ± 1.01 years; Group B, mean 3.6 ± 0.01 years) the Cobb angle of the main curve was less and T1-S1 height greater in group A compared with group B (p < 0.05). There was no statistically significant difference between group A and group B in the correction rate of the Cobb angle of the main curve or the growth rate of T1-S1 height (p > 0.05). There was no statistically significant difference in the coronal imbalance ratio, thoracic kyphosis abnormality ratio, or the occurrence PJK ratio between group A and group B at the last follow-up (p > 0.05), but the sagittal imbalance ratio and internal fixation abnormality ratio were higher in group A than in the group B (p < 0.05). CONCLUSIONS: During the treatment of EOS, both the convex side short fusion combined with concave side single growing rod technique and traditional bilateral growing rod technique can correct the Cobb angle of main curve with no significant hindering of the spinal growth observed. The traditional bilateral growing rod technique has advantages in control of the sagittal balance of the spine, and the complications associated with internal fixation were lower.

Rapamycin improves the survival of epilepsy model cells by blocking phosphorylation of mTOR base on computer simulations and cellular experiments.

PURPOSE: Epilepsy is a chronic brain dysfunction characterized by recurrent epileptic seizures. Rapamycin is a naturally occurring macrolide from Streptomyces hygroscopicus, and rapamycin may provide a protective effect on the nervous system by affecting mTOR. Therefore, we investigated the pharmacologic mechanism of rapamycin treating epilepsy through bioinformatics analysis, cellular experiments and supercomputer simulation. METHODS: Bioinformatics analysis was used to analyze targets of rapamycin treating epilepsy. We established epilepsy cell model by HT22 cells. RT-qPCR, WB and IF were used to verify the effects of rapamycin on mTOR at gene level and protein level. Computer simulations were used to model and evaluate the stability of rapamycin binding to mTOR protein. RESULTS: Bioinformatics indicated mTOR played an essential role in signaling pathways of cell growth and cell metabolism. Cellular experiments showed that rapamycin could promote cell survival, and rapamycin did not have an effect on mRNA expression of mTOR. However, rapamycin was able to significantly inhibit the phosphorylation of mTOR at protein level. Computer simulations indicated that rapamycin was involved in the treatment of epilepsy through regulating phosphorylation of mTOR at protein level. CONCLUSION: We found that rapamycin was capable of promoting the survival of epilepsy cells by inhibiting the phosphorylation of mTOR at protein level, and rapamycin did not have an effect on mRNA expression of mTOR. In addition to the traditional study that rapamycin affects mTORC1 complex by acting on FKBP12, this study found rapamycin could also directly block the phosphorylation of mTOR, therefore affecting the assembly of mTORC1 complex and mTOR signaling pathway.

Metal coordination nanotheranostics mediated by nucleoside metabolic inhibitors potentiate STING pathway activation for cancer metalloimmunotherapy.

Activation of the cyclic GMP-AMP synthase-stimulator of interferon genes (cGAS-STING) pathway is an effective way to initiate an immune response against tumors, and the research on agonists targeting STING has become a new hotspot in the development of antitumor drugs. However, as a novel STING agonist, the limited bioavailability and activation routes of manganese ions (Mn2+) significantly hinder its antitumor effects. To address these challenges, we have designed a metal-coordinated nucleoside metabolic inhibitor (gemcitabine, Gem)-induced metal nanotheranostic (MGP) with PEGylation. This formulation synergistically enhanced the immune response against cancer cells by sensitizing the cGAS-STING pathway and promoting immunogenic cell death (ICD). Modified with PEG derivatives, MGP was efficiently delivered to the tumor site and was internalized by cancer cells. Upon internalization, the release of Mn2+ triggered the activation of the cGAS-STING pathway, while the release of Gem induced DNA damage. On the one hand, the damaged DNA caused by Gem leaked into the cytoplasm, synergistically amplified Mn2+-induced activation of the cGAS-STING pathway, and induced the production of the tumor cytotoxic factor IFN-ß. On the other hand, Mn2+-mediated chemodynamic therapy (CDT) exhibited an ICD effect, which further synergized with the activation of the cGAS-STING pathway to promote dendritic cells (DCs) maturation and antigen-specific T cells infiltration. Both in vitro and in vivo studies have demonstrated that MGP nanotheranostics could elicit a robust antitumor effect, especially when combined with anti-PD-1. This study provided a new paradigm for intensifying immune activation by constructing metal coordination nanotheranostics.

Inhibition of human UDP-glucuronosyltransferase enzyme by entrectinib: Implications for drug-drug interactions.

As a new type of oral tyrosine kinase inhibitor, entrectinib can act on multiple targets and exert efficacy and has been approved for the treatment of non-small cell lung cancer (NSCLC) and solid tumors. However, whether entrectinib affects the activities of recombinant human UDP-glucuronosyltransferases (UGTs) remains unclear. Herein, we aimed to investigate the inhibitory effects of entrectinib on human UGTs and to assess the potential risk of causing drug-drug interactions (DDIs) based on the inhibition against UGTs. High-performance liquid chromatography (HPLC) was used to evaluate the inhibitory effects of entrectinib on UGTs according to the product formation rate of UGT substrate with or without entrectinib, and the inhibition kinetics experiment was conducted to assess the inhibitory type of entrectinib on UGTs. Our results showed that entrectinib exhibited extensive inhibitory effects on most human UGTs, and especially inhibited the activities of UGT1A7, UGT1A8, and UGT2B15 with Ki (Inhibition constant) of lower than 5 µM (0.95-4.38 µM). Furthermore, the results from quantitative prediction research suggested that the combination of entrectinib at 600 mg/day with substrates primarily metabolized by hepatic UGT2B15 or intestinal UGT1A7 and UGT1A8 might cause clinical DDIs. Thus, special attention should be paid to avoid adverse reactions induced by DDIs when co-administration of entrectinib and drugs metabolized by UGTs.

Unlocking high-performance HCl adsorption at elevated temperatures: the synthesis and characterization of robust Ca-Mg-Al mixed oxides.

The presence of HCl and SO2 gas imposes limitations on syngas utilization obtained from household waste in a wide range of applications. The hydrotalcite-like compounds (HTLs) have been proved that could remove HCl efficiency. However, the research on impact of synthesis conditions of HTLs and SO2 on HCl removal was limited. In this study, a range of Ca-Mg-Al mixed oxide sorbents was synthesized by calcining HTLs, with variations in crystallization temperature, solution pH, and the Ca/Mg molar ratio. These sorbents were examined for their effectiveness in removing HCl at medium-high temperatures under diverse conditions. The adsorption performance of selected sorbents for the removal of HCl, SO2, and HCl-SO2 mixed gas at temperature of 350 °C, 450 °C, and 550 °C, respectively, was evaluated using thermogravimetric analysis (TGA). It was observed that the HTL synthesis parameters significantly influenced the HCl adsorption capacity of Ca-Mg-Al mixed oxides. Notably, HTLs synthesized at 60 °C, a solution pH of 10-11, and a Ca/Mg ratio of 4 exhibited superior crystallinity and optimal adsorption characteristics. For individual HCl and SO2 removal, temperature had a minor effect on HCl adsorption but significantly impacted SO2 adsorption rates. At temperatures above 550 °C, SO2 removal efficiency substantially decreased. When exposed to a mixed gas, the Ca-Mg-Al mixed oxides could efficiently remove both HCl and SO2 at temperatures below 550 °C, with HCl dominating the adsorption process at higher temperatures. This dual-action capability is attributed to several mechanisms through which HTL sorbents interacted with HCl, including pore filling, ion exchange, and cation exchange. Initially, HCl absorbed onto specific sites created by water and CO2 removal due to the surface's polarity. Subsequently, HCl reacted with CaCO3 and CaO formed during HTL decomposition.

Mining the sustainability of takeaway businesses in online food delivery service supply chain.

The online food delivery service supply chain constitutes a crucial element in achieving sustainable development goals. With its prosperity, an increasing number of takeaway businesses are drawn to this sector. As their numbers rise, issues such as profitability resilience, environmental friendliness, and fulfillment of social responsibility emerge, posing potential disruptions to the service supply chain. Against this backdrop, our endeavor is to mine the sustainability of takeaway businesses using the triple bottom line. We propose a two-stage approach involving the Bayesian best-worst method and a data mining technique to derive the weights of sustainability criteria and the clusters of takeaway businesses. Subsequently, a case study is conducted focusing on takeaway businesses on the Ele.me platform in China. The results highlight economic sustainability as the most valued criterion, followed by social and environmental sustainability. Clustering outcomes reveal four distinct levels of sustainability, with a stronger performance in social sustainability compared to environmental and economic dimensions. Further discussions explore the relationship between sustainability levels, cuisine categories, and business size. Consequently, this study suggests an effective approach for advancing sustainability initiatives within the online food delivery service supply chain.

A new approach to explore and assess the sustainable remediation of chromium-contaminated wastewater by biochar based on 3E model.

As a cost-effective material, biochar, known as 'black gold', has been widely used for environmental applications (EA), including chromium-contaminated wastewater remediation. However, limited reports focused on the multiple impacts of biochar, including energy consumption (EC) and environmental risk (ER). Hence, to recommend biochar as a green material for sustainable development, the three critical units were explored and quantitatively assessed based on an adapted 3E model (EA-EC-ER). The tested biochar was produced by limited-oxygen pyrolysis at 400-700 °C by using three typical biomasses (Ulva prolifera, phoenix tree, and municipal sludge), and the optimal operational modulus of the 3E model was identified using six key indicators. The findings revealed a significant positive correlation between EC and biochar yield (p < 0.05). The biochar produced by phoenix tree consumed more energy due to having higher content of unstable carbon fractions. Further, high-temperature and low-temperature biochar demonstrated different chromium removal mechanisms. Notably, the biochar produced at low temperature (400 °C) achieved better EA due to having high removal capacity and stability. Regarding ER, pyrolysis temperature of 500 °C could effectively stabilize the ecological risk in all biochar and the biochar produced by Ulva prolifera depicted the greatest reduction (37-fold). However, the increase in pyrolysis temperature would lead to an increase in global warming potential by nearly 22 times. Finally, the 3E model disclosed that the biochar produced by Ulva prolifera at 500 °C with low EC, high EA, and low ER had the most positive recommendation index (+78%). Importantly, a rapid assessment methodology was established by extracting parameters from the correlation. Based on this methodology, about eight percent of biochar can be the highest recommended from more than 100 collected peer-related data. Overall, the obtained findings highlighted that the multiple impacts of biochar should be considered to efficiently advance global sustainable development goals.

Monitoring of copper adsorption on biochar using spectral induced polarization method.

Copper contaminant generated from mining and industrial smelting poses potential risks to human health. Biochar, as a low-energy and cost-effective biomaterial, holds value in Cu remediation. Spectral Induced Polarization (SIP) technique is employed in this study to monitor the Cu remediation processes of by biochar in column experiments. Cation exchange at low Cu2+ concentrations and surface complexation at high Cu2+ concentrations are identified as the major mechanisms for copper retention on biochar. The normalized chargeability (mn) from SIP signals linearly decreased (R2 = 0.776) with copper retention under 60 mg/L Cu influent; while mn linearly increases (R2 = 0.907, 0.852) under high 300 and 700 mg/L Cu influents. The characteristic polarizing unit sizes (primarily the pores adsorbing Cu2+) calculated from Schwartz equation match well with experimental results by mercury intrusion porosimetry (MIP). It is revealed that Cu2+ was driven to small pores (∼3 µm) given high concentration gradient (influent Cu2+ concentration of 700 mg/L). Comparing to activated carbon, biochar is identified as an ideal adsorbent for Cu remediation, given its high adsorption capacity, cost-effectiveness, carbon-sink ability, and high sensitivity to SIP responses - the latter facilitates its performance assessment.

Construction of a novel S-type γ-Bi2O3/CeO2 heterojunction for highly efficient photocatalytic degradation of antibiotics.

Cubic nanoparticles of CeO2 were partly covered on the tetrahedron surface of γ-Bi2O3 through a hydrothermal reaction and then a calcination process to construct a novel S-type γ-Bi2O3/CeO2 heterojunction. The optimized sample removed 96% of lomefloxacin and 81% of tetracycline. During the cycling test, the photocatalytic efficiency of lomefloxacin and tetracycline was maintained above 87% and 80%, respectively, for five consecutive cycles. According to XRD and Raman spectra characterization, the sample after cycling held a stable crystal structure. Holes, OH-˙, O2˙, and electrons participated in the degradation of lomefloxacin, while tetracycline was removed via the effect of the former three active substances. Based on theoretical calculation and experimental tests, the excellent photocatalytic activity of γ-Bi2O3/CeO2 came from the fast transfer of charge carriers along the S-type path. Moreover, the CB electrons of γ-Bi2O3 and VB holes of CeO2 were preserved to generate free radicals for antibiotic degradation. The colony numbers of Escherichia coli were 1.50 × 10-6 CFU mL-1 and 1.39 × 10-6 CFU mL-1 in solutions after the degradation of the two pollutants, which represents the non-toxicity of the final products. The γ-Bi2O3/CeO2 sample has a potential application for antibiotic removal from modern sewage.