This work challenges the conventional approach of using NdIII 4F3/2 lifetime changes for evaluating the experimental NdIII â YbIII energy transfer rate and efficiency. Using near-infrared (NIR) emitting Nd:Yb mixed-metal coordination polymers (CPs), synthesized via solvent-free thermal grinding, we demonstrate that the NdIII [2H11/2 â 4I15/2] â YbIII [2F7/2 â 2F5/2] pathway, previously overlooked, dominates energy transfer due to superior energy resonance and J-level selection rule compatibility. This finding upends the conventional focus on the NdIII [4F3/2 â 4I11/2] â YbIII [2F7/2 â 2F5/2] transition pathway. We characterized Nd0.890Yb0.110(BTC)(H2O)6 as a promising cryogenic NIR thermometry system and employed our novel energy transfer understanding to perform simulations, yielding theoretical thermometric parameters and sensitivities for diverse Nd:Yb ratios. Strikingly, experimental thermometric data closely matched the theoretical predictions, validating our revised model. This novel perspective on NdIII â YbIII energy transfer holds general applicability for the NdIII/YbIII pair, unveiling an important spectroscopic feature with broad implications for energy transfer-driven materials design.
We report the synthesis and single-crystal X-ray diffraction, magnetic, and luminescence measurements of a novel family of luminescent cage-like tetranuclear silsesquioxanes (PhSiO1.5)8(LnO1.5)4(O)(C5H8O2)6(EtOH)2(CH3CN)2â 2CH3CN (where Ln = Tb, 1; Tb/Eu, 2; and Gd, 3), featuring seven-coordinated lanthanide ions arranged in a one-capped trigonal prism geometry. Compounds 1 and 2 exhibit characteristic Tb3+ and Tb3+/Eu3+-related emissions, respectively, sensitized by the chelating antenna acetylacetonate (acac) ligands upon excitation in the UV and visible spectral regions. Compound 3 is used to assess the energies of the triplet states of the acac ligand. For compound 1, theoretical calculations on the intramolecular energy transfer and multiphonon rates indicate a thermal balance between the 5D4 Stark components, while the mixed Tb3+/Eu3+ analog 2, with a Tb:Eu ratio of 3:1, showcases intra-cluster Tb3+-to-Eu3+ energy transfer, calculated theoretically as a function of temperature. By utilizing the intensity ratio between the 5D4â7F5 (Tb3+) and 5D0â7F2 (Eu3+) transitions in the range 11-373 K, we demonstrate the realization of a ratiometric luminescent thermometer with compound 2, operating in the range 11-373 K with a maximum relative sensitivity of 2.0% K-1 at 373 K. These findings highlight the potential of cage-like silsesquioxanes as versatile materials for optical sensing-enabled applications.
Correction for 'Carbon dots on LAPONITE® hybrid nanocomposites: solid-state emission and inter-aggregate energy transfer' by Bruno S. D. Onishi et al., Nanoscale, 2024, https://doi.org/10.1039/d3nr06336d.
This study delves into the photoluminescent characteristics of solid-state hybrid carbon dots/LAPONITE® (CDLP). These hybrid materials were synthesized using the hydrothermal method with a precise pH control set at 8.5. The LAPONITE® structure remains intact without structural collapse, and we detected the possible deposition of carbon dots (CDs) aggregates on the clay mineral's edges. The use of different concentrations of citric acid (10-, 6-, 2- and 1-times weight/weight of LAPONITE® mass, maintaining the 1 : 1 molar ratio with ethylenediamine) during synthesis results in different CDs concentrations in CDLP-A (low precursors concentration) and CDLP-D (high concentration) with an amorphous structure and average size around 2.8-3.0 nm. The CDLP displayed visible photoluminescence emission in aqueous and powder, which the last underwent quenching according to lifetimes and quantum yield measurements. Low-temperature measurements revealed an enhancement of the non-radiative pathways induced by aggregation. Energy transfer modelling based on Förster-Dexter suggests an approximate mean distance of 9.5 nm between clusters of CDs.
We investigate the intricate relationship among temperature, pH, and Brownian velocity in a range of differently sized upconversion nanoparticles (UCNPs) dispersed in water. These UCNPs, acting as nanorulers, offer insights into assessing the relative proportion of high-density and low-density liquid in the surrounding hydration water. The study reveals a size-dependent reduction in the onset temperature of liquid-water fluctuations, indicating an augmented presence of high-density liquid domains at the nanoparticle surfaces. The observed upper-temperature threshold is consistent with a hypothetical phase diagram of water, validating the two-state model. Moreover, an increase in pH disrupts the organization of water molecules, similar to external pressure effects, allowing simulation of the effects of temperature and pressure on hydrogen bonding networks. The findings underscore the significance of the surface of suspended nanoparticles for understanding high- to low-density liquid fluctuations and water behavior at charged interfaces.
The unique tunable properties of glasses make them versatile materials for developing numerous state-of-the-art optical technologies. To design new optical glasses with tailored properties, an extensive understanding of the intricate correlation between their chemical composition and physical properties is mandatory. By harnessing this knowledge, the full potential of vitreous matrices can be unlocked, driving advancements in the field of optical sensors. We herein demonstrate the feasibility of using fluoride phosphate glasses co-doped with trivalent praseodymium (Pr3+) and ytterbium (Yb3+) ions for temperature sensing over a broad range of temperatures. These glasses possess high chemical and thermal stability, working as luminescent primary thermometers that rely on the thermally coupled levels of Pr3+ that eliminate the need for recurring calibration procedures. The prepared glasses exhibit a relative thermal sensitivity and uncertainty at a temperature of 1.0% K-1 and 0.5 K, respectively, making them highly competitive with the existing luminescent thermometers. Our findings highlight that Pr3+-containing materials are promising for developing cost-effective and accurate temperature probes, taking advantage of the unique versatility of these vitreous matrices to design the next generation of photonic technologies.
Despite the great effort made in recent years on lanthanide-based ratiometric luminescent nanothermometers able to provide temperature measurements in water, their design remains challenging. We report on the synthesis and properties of efficient ratiometric nanothermometers that are based on mesoporous stellate nanoparticles (MSN) of ca. 90 nm functionalized with an acetylacetonate (acac) derivative inside the pores and loaded with ß-diketonate-Tb3+/Eu3+ complexes able to work in water, in PBS or in cells. Encapsulating a [(Tb/Eu)9(acac)16(µ3-OH)8(µ4-O)(µ4-OH)] complex (Tb/Eu ratio = 19/1 and 9/1) led to hybrid multifunctionalized nanoparticles exhibiting a Tb3+ and Eu3+ characteristic temperature-dependent luminescence with a high rate Tb3+-to-Eu3+ energy transfer. According to theoretical calculations, the modifications of photoluminescence properties and the increase in the pairwise Tb3+-to-Eu3+ energy transfer rate by about 10 times can be rationalized as a change of the coordination number of the Ln3+ sites of the complex from 7 to 8 accompanied by a symmetry evolution from Cs to C4v and a slight shortening of intramolecular Ln3+-Ln3+ distances upon the effect of encapsulation. These nanothermometers operate in the 20-70 °C range with excellent photothermal stability, cyclability and repeatability (>95%), displaying a maximum relative thermal sensitivity of 1.4% °C-1 (at 42.7 °C) in water. Furthermore, they can operate in cells with a thermal sensitivity of 8.6% °C-1 (at 40 °C), keeping in mind that adjusting the calibration for each system is necessary to ensure accurate measurements.
Luminescence (nano)thermometry is a remote sensing technique that relies on the temperature dependency of the luminescence features (e.g., bandshape, peak energy or intensity, and excited state lifetimes and risetimes) of a phosphor to measure temperature. This technique provides precise thermal readouts with superior spatial resolution in short acquisition times. Although luminescence thermometry is just starting to become a more mature subject, it exhibits enormous potential in several areas, e.g., optoelectronics, photonics, micro- and nanofluidics, and nanomedicine. This work reviews the latest trends in the field, including the establishment of a comprehensive theoretical background and standardized practices. The reliability, repeatability, and reproducibility of the technique are also discussed, along with the use of multiparametric analysis and artificial-intelligence algorithms to enhance thermal readouts. In addition, examples are provided to underscore the challenges that luminescence thermometry faces, alongside the need for a continuous search and design of new materials, experimental techniques, and analysis procedures to improve the competitiveness, accessibility, and popularity of the technology.
Luminescent thermometry allows the remote detection of the temperature and holds great potential in future technological applications in which conventional systems could not operate. Complementary approaches to measuring the temperature aiming to enhance the thermal sensitivity would however represent a decisive step forward. For the first time, we demonstrate the proof-of-concept that luminescence thermometry could be associated with a complementary temperature readout related to a different property. Namely, we propose to take advantage of the temperature dependence of both magnetic (canonical susceptibility and relaxation time) and luminescence features (emission intensity) found in Single-Molecule Magnets (SMM) to develop original dual magneto-optical molecular thermometers to conciliate high-performance SMM and Boltzmann-type luminescence thermometry. We highlight this integrative approach to concurrent luminescent and magnetic thermometry using an air-stable benchmark SMM [Dy(bbpen)Cl] (H2 bbpen=N,N'-bis(2-hydroxybenzyl)-N,N'-bis(2-methylpyridyl)ethyl-enediamine)) exhibiting Dy3+ luminescence. The synergy between multiparametric magneto-optical readouts and multiple linear regression makes possible a 10-fold improvement in the relative thermal sensitivity of the thermometer over the whole temperature range, compared with the values obtained with the single optical or magnetic devices.
Upconversion broadband white light emission driven by low-power near-infrared (NIR) lasers has been reported for many materials, but the mechanisms and effects related to this phenomenon remain unclear. Herein, we investigate the origin of laser-induced continuous white light emission in synthesized nanoparticles (Gd0.89Yb0.10Er0.01)2O3 and a mechanical mixture of commercial oxides with the same composition 89% Gd2O3, 10% Yb2O3, and 1% Er2O3. We report their photophysical features with respect to sample compactness, laser irradiation (wavelength, power density, excitation cycles), pressure, temperature, and temporal dynamics. Despite the sensitizer (Yb3+) and activator (Er3+) being in different particles for the mechanical mixture, efficient discrete and continuous upconversion emissions were observed. Furthermore, the synthesized nanoparticles were developed as primary luminescent thermometers (upon excitation at NIR) in the 299-363 K range, using the Er3+ upconversion 2H11/2 â 4I15/2/4S3/2 â 4I15/2 intensity ratio. They were also operating as secondary ones in the 1949-3086 K, based on the blackbody distribution of the observed white light emission. Our findings provide important insights into the mechanisms and effects related to the transition from discrete to continuous upconversion emissions with potential applications in remote temperature sensing.
Thermometry , Phototherapy , Light , Temperature , Diagnostic Techniques, Cardiovascular
Insoluble amyloid fibrils made from proteins and peptides are difficult to be degraded in both living and artificial systems. The importance of studying their physical stability lies primarily with their association with human neurodegenerative diseases, but also owing to their potential role in multiple bio-nanomaterial applications. Here, gold nanorods (AuNRs) were utilized to investigate the plasmonic heating properties and dissociation of amyloid-ß fibrils formed by different peptide fragments (Aß16-22/Aß25-35/Aß1-42) related to the Alzheimer's disease. It is demonstrated that AuNRs were able to break mature amyloid-ß fibrils from both the full length (Aß1-42) and peptide fragments (Aß16-22/Aß25-35) within minutes by triggering ultrahigh localized surface plasmon resonance (LSPR) heating. The LSPR energy absorbed by the amyloids to unfold and move to higher levels in the protein folding energy landscape can be measured directly and in situ by luminescence thermometry using lanthanide-based upconverting nanoparticles. We also show that Aß16-22 fibrils, with the largest persistence length, displayed the highest resistance to breakage, resulting in a transition from rigid fibrils to short flexible fibrils. These findings are consistent with molecular dynamics simulations indicating that Aß16-22 fibrils possess the highest thermostability due to their highly ordered hydrogen bond networks and antiparallel ß-sheet orientation, hence affected by an LSPR-induced remodeling rather than melting. The present results introduce original strategies for disassembling amyloid fibrils noninvasively in liquid environment; they also introduce a methodology to probe the positioning of amyloids on the protein folding and aggregation energy landscape via nanoparticle-enabled plasmonic and upconversion nanothermometry.
Amyloid , Heating , Humans , Amyloid/chemistry , Amyloid beta-Peptides/chemistry , Protein Folding , Peptide Fragments/chemistry , Lasers
The generation of temperature gradients on nanoparticles heated externally by a magnetic field is crucially important in magnetic hyperthermia therapy. But the intrinsic low heating power of magnetic nanoparticles, at the conditions allowed for human use, is a limitation that restricts the general implementation of the technique. A promising alternative is local intracellular hyperthermia, whereby cell death (by apoptosis, necroptosis, or other mechanisms) is attained by small amounts of heat generated at thermosensitive intracellular sites. However, the few experiments conducted on the temperature determination of magnetic nanoparticles have found temperature increments that are much higher than the theoretical predictions, thus supporting the local hyperthermia hypothesis. Reliable intracellular temperature measurements are needed to get an accurate picture and resolve the discrepancy. In this paper, we report the real-time variation of the local temperature on γ-Fe2O3 magnetic nanoheaters using a Sm3+/Eu3+ ratiometric luminescent thermometer located on its surface during exposure to an external alternating magnetic field. We measure maximum temperature increments of 8 °C on the surface of the nanoheaters without any appreciable temperature increase on the cell membrane. Even with magnetic fields whose frequency and intensity are still well within health safety limits, these local temperature increments are sufficient to produce a small but noticeable cell death, which is enhanced considerably as the magnetic field intensity is increased to the maximum level tolerated for human use, consequently demonstrating the feasibility of local hyperthermia.
Hyperthermia, Induced , Humans , Temperature , Hyperthermia, Induced/methods , Hot Temperature , Magnetic Fields , Cell Death
Two three-dimensional (3-D) polycyanidometallate-based luminescent thermometers with the general formula {Ln4Co4(CN)24(4-benpyo)17(H2O)·7H2O}n Ln = (Dy(III)(1), Eu(III)(2)), based on the red-emissive diamagnetic linker [Co(CN)6]3- and the bulky pyridine derivative that possesses the N-oxide moiety, 4-benzyloxy-pyridine N-oxide (benpyo), were prepared for the first time. The structure of compound 1 has been determined by single-crystal X-ray crystallography while the purity and structure of 2 have been confirmed by CHN, Fourier transform infrared spectroscopy (FT-IR), and powder X-ray diffraction (PXRD) analysis. Magnetic AC susceptibility measurements at zero field show no single-molecule magnet (SMM) behavior indicating fast relaxation operating in 1. Upon application of an optimal field of 2 kOe, the SMM character of compound 1 is revealed while the τ(Τ) can be reproduced solely considering the Raman process τ-1 = CTn with C = 7.0901(3) s-1 K-n and n = 3.58(1), indicating that a high density of low-lying states and optical as well as acoustic phonons play a major role in the relaxation mechanism. Micron-sized superconducting quantum interference device (µ-SQUID) loops show a very narrow opening in agreement with the AC susceptibility studies and complete active space self-consistent field (CASSCF) calculations. The interaction operating between the Dy(III) ions was quantified from CASSCF calculations. Good agreement is found by fitting the experimental DC χMΤ(Τ) and M(H), employing the Lines model, with JLines = -0.087 cm-1 (-0.125 K). The excitation spectra of compound 2 are used for temperature sensing in the 25-325 nm range with a maximum relative thermal sensitivity, Sr = 0.6% K-1 at 325 K, whereas compound 1 operates as a luminescent thermometer based on its emission features in the temperature range of 16-350 K with Sr ≈ 2.3% K-1 at 240 K.
In this work, we investigated from a theoretical point of view the dynamics of the energy transfer process from the ligand to Eu(III) ion for 12 isomeric species originating from six different complexes differing by nature of the ligand and the total charge. The cationic complexes present the general formula [Eu(L)(H2O)2]+ (where L = bpcd2- = N,N'-bis(2-pyridylmethyl)-trans-1,2-diaminocyclohexane N,N'-diacetate; bQcd2- = N,N'-bis(2-quinolinmethyl)-trans-1,2-diaminocyclohexane N,N'-diacetate; and bisoQcd2- = N,N'-bis(2-isoquinolinmethyl)-trans-1,2-diaminocyclohexane N,N'-diacetate), while the neutral complexes present the Eu(L)(H2O)2 formula (where L = PyC3A3- = N-picolyl-N,N',N'-trans-1,2-cyclohexylenediaminetriacetate; QC3A3- = N-quinolyl-N,N',N'-trans-1,2-cyclohexylenediaminetriacetate; and isoQC3A3- = N-isoquinolyl-N,N',N'-trans-1,2-cyclohexylenediaminetriacetate). Time-dependent density functional theory (TD-DFT) calculations provided the energy of the ligand excited donor states, distances between donor and acceptor orbitals involved in the energy transfer mechanism (RL), spin-orbit coupling matrix elements, and excited-state reorganization energies. The intramolecular energy transfer (IET) rates for both singlet-triplet intersystem crossing and ligand-to-metal (and vice versa) involving a multitude of ligand and Eu(III) levels and the theoretical overall quantum yields (Ïovl) were calculated (the latter for the first time without the introduction of experimental parameters). This was achieved using a blend of DFT, Judd-Ofelt theory, IET theory, and rate equation modeling. Thanks to this study, for each isomeric species, the most efficient IET process feeding the Eu(III) excited state, its related physical mechanism (exchange interaction), and the reasons for a better or worse overall energy transfer efficiency (ηsens) in the different complexes were determined. The spectroscopically measured Ïovl values are in good agreement with the ones obtained theoretically in this work.
The effect of ligands' energy levels on thermal dependence of lanthanide emission was examined to create new molecular nanothermometers. A series of Ln2Ga8L8'L8â³ metallacrowns (shorthand Ln2L8'), where Ln = Gd3+, Tb3+, or Sm3+ (H3L' = salicylhydroxamic acid (H3shi), 5-methylsalicylhydroxamic acid (H3mshi), 5-methoxysalicylhydroxamic acid (H3moshi), and 3-hydroxy-2-naphthohydroxamic acid (H3nha)) and H2Lâ³ = isophthalic acid (H2iph), was synthesized and characterized. Within the series, ligand-centered singlet state (S1) energy levels ranged from 23,300 to 27,800 cm-1, while triplet (T1) energy levels ranged from 18,150 to 21,980 cm-1. We demonstrated that the difference between T1 levels and relevant energies of the excited 4G5/2 level of Sm3+ (17,800 cm-1) and 5D4 level of Tb3+ (20,400 cm-1) is the major parameter controlling thermal dependence of the emission intensity via the back energy transfer mechanism. However, when the energy difference between S1 and T1 levels is small (below 3760 cm-1), the S1 â T1 intersystem crossing (and its reverse, S1 â T1) mechanism contributes to the thermal behavior of metallacrowns. Both mechanisms affect Ln3+-centered room-temperature quantum yields with values ranging from 2.07(6)% to 31.2(2)% for Tb2L8' and from 0.0267(7)% to 2.27(5)% for Sm2L8'. The maximal thermal dependence varies over a wide thermal range (ca. 150-350 K) based on energy gaps between relevant ligand-based and lanthanide-based electronic states. By mixing Tb2moshi8' with Sm2moshi8' in a 1:1 ratio, an optical thermometer with a relative thermal sensitivity larger than 3%/K at 225 K was created. Other temperature ranges are also accessible with this approach.
Lanthanoid Series Elements , Thermometers , Energy Transfer , Lanthanoid Series Elements/chemistry , Ligands
The tetranuclear linear complex [Dy4(1,1,4-H3Lr)2(OAc)6]·CH3OH (1·CH3OH) was satisfactorily prepared and characterized. Its X-ray structure shows that it contains two types of octacoordinated DyIII ions, with distorted triangular dodecahedral and square antiprism geometries. This complex is an SMM, with multiple relaxation pathways, and with an anisotropic energy barrier of 39.7 K. 1·CH3OH also operates as a luminescent thermometer in the 11-295 K range, with a maximum relative thermal sensitivity of 1.6% K-1 and a minimum temperature uncertainty of 1.1 K at 295 K. Thus, 1·CH3OH is the first Dy4 SMM with luminescent thermometry, and this system is a rare example of dysprosium SMM that accesses the thermometric characteristics involving the ligand ascribed to the triplet emission in combination with DyIII emission.
Multifunctional nano-objects containing a magnetic heater and a temperature emissive sensor in the same nanoparticle have recently emerged as promising tools towards personalized nanomedicine permitting hyperthermia-assisted treatment under local temperature control. However, a fine control of nano-systems' morphology permitting the synthesis of a single magnetic core with controlled position of the sensor presents a main challenge. We report here the design of new iron oxide core-silica shell nano-objects containing luminescent Tb3+/Eu3+-(acetylacetonate) moieties covalently anchored to the silica surface, which act as a promising heater/thermometer system. They present a single magnetic core and a controlled thickness of the silica shell, permitting a uniform spatial distribution of the emissive nanothermometer relative to the heat source. These nanoparticles exhibit the Tb3+ and Eu3+ characteristic emissions and suitable magnetic properties that make them efficient as a nanoheater with a Ln3+-based emissive self-referencing temperature sensor covalently coupled to it. Heating capacity under an alternating current magnetic field was demonstrated by thermal imaging. This system offers a new strategy permitting a rapid heating of a solution under an applied magnetic field and a local self-referencing temperature sensing with excellent thermal sensitivity (1.64%·K-1 (at 40 °C)) in the range 25-70 °C, good photostability, and reproducibility after several heating cycles.
The 1 : 1 : 1 reaction of YbCl3·6H2O, K3[Co(CN)6] and bpyO2 in H2O has provided access to a complex with formula [YbCo(CN)6(bpyO2)2(H2O)3]·4H2O (1) in a very good yield while its structure has been determined by single-crystal X-ray crystallography and characterised based on elemental analyses and IR spectra. Magnetic susceptibility studies showed the complex to be a field induced single molecule magnet, as confirmed by µ-SQUID measurements. CASSCF calculations confirm the existence of a mJ = 7/2 ground state, with rather large transverse components, responsible for the fast relaxation characteristic of compound 1 at zero DC field, which is reduced upon application of DC fields. Moreover, a combination of luminescence studies along with CASSCF calculation allows the identification of the band structure of the complex, which is ultimately related to its electronic properties. Compound 1 operates as a luminescent thermometer in the 125-300 K range with a maximum relative thermal sensitivity of ≈0.1% K-1 at 180 K.
Smart designed core-shell nanostructures formed by a YVO4: Nd3+ nanoparticle as the core, the sonosensitizer hematoporphyrinmonomethyl ether as the carrier, and MnO2 nanosheets as the shell demonstrate bimodal imaging and highly efficient sonodynamic therapy of orthotopic gliomas.
