Enhancing the Substrate Specificity of Clostridium Succinyl-CoA Reductase for Synthetic Biology and Biocatalysis.

Succinyl-CoA reductase (SucD) is an acylating aldehyde reductase that catalyzes the NADPH-dependent reduction of succinyl-CoA to succinic semialdehyde. The reaction sequence from succinate to crotonyl-CoA is of particular interest for several new-to-nature CO2-fixation pathways, such as the crotonyl-CoA/ethylmalonyl-CoA/hydroxybutyryl-CoA (CETCH) cycle, in which SucD plays a key role. However, pathways like the CETCH cycle feature several CoA-ester intermediates, which could be potentially side substrates for this enzyme. Here, we show that the side reaction for most CETCH cycle metabolites is relatively small (<2%) with the exception of mesaconyl-C1-CoA (16%), which represents a competing substrate in this pathway. We addressed this promiscuity by solving the crystal structure of a SucD of Clostridium kluyveri in complex with NADP+ and mesaconyl-C1-CoA. We further identified two residues (Lys70 and Ser243) that coordinate mesaconyl-C1-CoA at the active site. We targeted those residues with site-directed mutagenesis to improve succinyl-CoA over mesaconyl-C1-CoA reduction. The best resulting SucD variant, K70R, showed a strongly reduced side activity for mesaconyl-C1-CoA, but the substitution also reduced the specific activity for succinyl-CoA by a factor of 10. Transferring the same mutations into a SucD homologue from Clostridium difficile similarly decreases the side reaction of this enzyme for mesaconyl-C1-CoA from 12 to 2%, notably without changing the catalytic efficiency for succinyl-CoA. Overall, our structure-based engineering efforts provided a highly specific enzyme of interest for several applications in biocatalysis and synthetic biology.

Design and Control of Extrachromosomal Elements in Methylorubrum extorquens AM1.

Genetic tools are a prerequisite to engineer cellular factories for synthetic biology and biotechnology. Methylorubrum extorquens AM1 is an important platform organism of a future C1-bioeconomy. However, its application is currently limited by the availability of genetic tools. Here we systematically tested repABC regions to maintain extrachromosomal DNA in M. extorquens. We used three elements to construct mini-chromosomes that are stably inherited at single copy number and can be shuttled between Escherichia coli and M. extorquens. These mini-chromosomes are compatible among each other and with high-copy number plasmids of M. extorquens. We also developed a set of inducible promoters of wide expression range, reaching levels exceeding those currently available, notably the PmxaF-promoter. In summary, we provide a set of tools to control the dynamic expression and copy number of genetic elements in M. extorquens, which opens new ways to unleash the metabolic and biotechnological potential of this organism for future applications.

An engineered Calvin-Benson-Bassham cycle for carbon dioxide fixation in Methylobacterium extorquens AM1.

Organisms are either heterotrophic or autotrophic, meaning that they cover their carbon requirements by assimilating organic compounds or by fixing inorganic carbon dioxide (CO2). The conversion of a heterotrophic organism into an autotrophic one by metabolic engineering is a long-standing goal in synthetic biology and biotechnology, because it ultimately allows for the production of value-added compounds from CO2. The heterotrophic Alphaproteobacterium Methylobacterium extorquens AM1 is a platform organism for a future C1-based bioeconomy. Here we show that M. extorquens AM1 provides unique advantages for establishing synthetic autotrophy, because energy metabolism and biomass formation can be effectively separated from each other in the organism. We designed and realized an engineered strain of M. extorquens AM1 that can use the C1 compound methanol for energy acquisition and forms biomass from CO2 by implementation of a heterologous Calvin-Benson-Bassham (CBB) cycle. We demonstrate that the heterologous CBB cycle is active, confers a distinct phenotype, and strongly increases viability of the engineered strain. Metabolic 13C-tracer analysis demonstrates the functional operation of the heterologous CBB cycle in M. extorquens AM1 and comparative proteomics of the engineered strain show that the host cell reacts to the implementation of the CBB cycle in a plastic way. While the heterologous CBB cycle is not able to support full autotrophic growth of M. extorquens AM1, our study represents a further advancement in the design and realization of synthetic autotrophic organisms.

A Family of Single Copy repABC-Type Shuttle Vectors Stably Maintained in the Alpha-Proteobacterium Sinorhizobium meliloti.

A considerable share of bacterial species maintains segmented genomes. Plant symbiotic α-proteobacterial rhizobia contain up to six repABC-type replicons in addition to the primary chromosome. These low or unit-copy replicons, classified as secondary chromosomes, chromids, or megaplasmids, are exclusively found in α-proteobacteria. Replication and faithful partitioning of these replicons to the daughter cells is mediated by the repABC region. The importance of α-rhizobial symbiotic nitrogen fixation for sustainable agriculture and Agrobacterium-mediated plant transformation as a tool in plant sciences has increasingly moved biological engineering of these organisms into focus. Plasmids are ideal DNA-carrying vectors for these engineering efforts. On the basis of repABC regions collected from α-rhizobial secondary replicons, and origins of replication derived from traditional cloning vectors, we devised the versatile family of pABC shuttle vectors propagating in Sinorhizobium meliloti, related members of the Rhizobiales, and Escherichia coli. A modular plasmid library providing the elemental parts for pABC vector assembly was founded. The standardized design of these vectors involves five basic modules: (1) repABC cassette, (2) plasmid-derived origin of replication, (3) RK2/RP4 mobilization site (optional), (4) antibiotic resistance gene, and (5) multiple cloning site flanked by transcription terminators. In S. meliloti, pABC vectors showed high propagation stability and unit-copy number. We demonstrated stable coexistence of three pABC vectors in addition to the two indigenous megaplasmids in S. meliloti, suggesting combinability of multiple compatible pABC plasmids. We further devised an in vivo cloning strategy involving Cre/lox-mediated translocation of large DNA fragments to an autonomously replicating repABC-based vector, followed by conjugation-mediated transfer either to compatible rhizobia or E. coli.

Towards the exploitation of glycerol's high reducing power in Saccharomyces cerevisiae-based bioprocesses.

One advantage of using glycerol as a carbon source for industrial bioprocesses is its higher degree of reduction compared to glucose. In order to exploit this reducing power for the production of reduced compounds thereby significantly increasing maximum theoretical yields, the electrons derived from glycerol oxidation must first be saved in the form of cytosolic NAD(P)H. However, the industrial platform organism Saccharomyces cerevisiae naturally uses an FAD-dependent pathway for glycerol catabolism transferring the electrons to the respiratory chain. Here, we developed a pathway replacement strategy forcing glycerol catabolism through a synthetic, NAD+-dependent route. The required expression cassettes were integrated via CRISPR-Cas9 targeting the endogenous GUT1 locus, thereby abolishing the native FAD-dependent pathway. Interestingly, this pathway replacement even established growth in synthetic glycerol medium of strains naturally unable to grow on glycerol and an engineered derivative of CEN.PK even showed the highest ever reported maximum specific growth rate on glycerol (0.26h-1).

A functional difference between native and horizontally acquired genes in bdelloid rotifers.

The form of RNA processing known as SL trans-splicing involves the transfer of a short conserved sequence, the spliced leader (SL), from a noncoding SL RNA to the 5' ends of mRNA molecules. SL trans-splicing occurs in several animal taxa, including bdelloid rotifers (Rotifera, Bdelloidea). One striking feature of these aquatic microinvertebrates is the large proportion of foreign genes, i.e. those acquired by horizontal gene transfer from other organisms, in their genomes. However, whether such foreign genes behave similarly to native genes has not been tested in bdelloids or any other animal. We therefore used a combination of experimental and computational methods to examine whether transcripts of foreign genes in bdelloids were SL trans-spliced, like their native counterparts. We found that many foreign transcripts contain SLs, use similar splice acceptor sequences to native genes, and are able to undergo alternative trans-splicing. However, a significantly lower proportion of foreign mRNAs contains SL sequences than native transcripts. This demonstrates a novel functional difference between foreign and native genes in bdelloids and suggests that SL trans-splicing is not essential for the expression of foreign genes, but is acquired during their domestication.

The expression of glycerol facilitators from various yeast species improves growth on glycerol of Saccharomyces cerevisiae.

Glycerol is an abundant by-product during biodiesel production and additionally has several assets compared to sugars when used as a carbon source for growing microorganisms in the context of biotechnological applications. However, most strains of the platform production organism Saccharomyces cerevisiae grow poorly in synthetic glycerol medium. It has been hypothesized that the uptake of glycerol could be a major bottleneck for the utilization of glycerol in S. cerevisiae. This species exclusively relies on an active transport system for glycerol uptake. This work demonstrates that the expression of predicted glycerol facilitators (Fps1 homologues) from superior glycerol-utilizing yeast species such as Pachysolen tannophilus, Komagataella pastoris, Yarrowia lipolytica and Cyberlindnera jadinii significantly improves the growth performance on glycerol of the previously selected glycerol-consuming S. cerevisiae wild-type strain (CBS 6412-13A). The maximum specific growth rate increased from 0.13 up to 0.18 h-1 and a biomass yield coefficient of 0.56 gDW/gglycerol was observed. These results pave the way for exploiting the assets of glycerol in the production of fuels, chemicals and pharmaceuticals based on baker's yeast.

Re-evaluation of glycerol utilization in Saccharomyces cerevisiae: characterization of an isolate that grows on glycerol without supporting supplements.

BACKGROUND: Glycerol has attracted attention as a carbon source for microbial production processes due to the large amounts of crude glycerol waste resulting from biodiesel production. The current knowledge about the genetics and physiology of glycerol uptake and catabolism in the versatile industrial biotechnology production host Saccharomyces cerevisiae has been mainly based on auxotrophic laboratory strains, and carried out in the presence of growth-supporting supplements such as amino acids and nucleic bases. The latter may have resulted in ambiguous conclusions concerning glycerol growth in this species. The purpose of this study was to re-evaluate growth of S. cerevisiae in synthetic glycerol medium without the addition of supplements. RESULTS: Initial experiments showed that prototrophic versions of the laboratory strains CEN.PK, W303, and S288c did not exhibit any growth in synthetic glycerol medium without supporting supplements. However, a screening of 52 S. cerevisiae isolates for growth in the same medium revealed a high intraspecies diversity. Within this group significant variation with respect to the lag phase and maximum specific growth rate was observed. A haploid segregant of one good glycerol grower (CBS 6412-13A) was selected for detailed analysis. Single deletions of the genes encoding for the glycerol/H+ symporter (STL1), the glycerol kinase (GUT1), and the mitochondrial FAD+-dependent glycerol 3-phosphate dehydrogenase (GUT2) abolished glycerol growth in this strain, implying that it uses the same glycerol utilization pathway as previously identified in auxotrophic laboratory strains. Segregant analysis of a cross between CBS 6412-13A and CEN.PK113-1A revealed that the glycerol growth phenotype is a quantitative trait. Genetic linkage and reciprocal hemizygosity analysis demonstrated that GUT1CBS 6412-13A is one of the multiple genetic loci contributing to the glycerol growth phenotype. CONCLUSION: The S. cerevisiae intraspecies diversity with regard to glycerol growth is a valuable starting point to identify the genetic and molecular basis of this phenotype. This knowledge can be applied for further rational strain improvement with the goal of using glycerol as a carbon source in industrial biotechnology processes based on S. cerevisiae as a production organism.