Battle of the titans: Survivorship analysis of the 3 most common types of uncemented femoral stems used across national registries.

Background: Although many institutions utilize uncemented stems as routine in performing total hip arthroplasty (THA), many surgeons continue to rely on outcomes reported in the literature in the form of small cohorts and patient series when analyzing survivorship for specific implants. The purpose of this study was to identify and analyze the survivorship of the 3 most common uncemented stem types (as opposed to brands) used across multiple national joint registries. Methods: A review of data available from all national joint registries was carried out in July 2022. Analysis of each individual registry and classified uncemented implants into the seven different uncemented stem types. The 3 most common stem types were identified, and average cumulative revision rates calculated. Metal on metal bearings surface implants were excluded from this study due to high revision rates across all implant types. Results: Our detailed review identified 6 out of 13 (NJR, AOANJRR, LROI, EPRD, MARCQI and the NZJR) international registries reporting implant specific survivorship on uncemented femoral stems; including 960,328 uncemented stems across all registries. The most common type of stem used was type 3c, accounting for 61% (583,724), followed by type 1 stems with 23% (217,897) and type 2 stems with 8% (79,257). Cumulative revision rates at 13 years follow-up for these stems ranged from 6.9% to 7.9%. Conclusion: Although all stem types have comparable revision rates across all registries, the most common uncemented stem reported was the type 3c, tapered rectangular fully coated stem. Furthermore, out of all type 3c, the Müller design philosophy with full hydroxyapatite coating seems to be the most sought after worldwide. In this study we can conclude, thus far, that there does not appear to clinical or statistical differences in revision rates between the different stem types. Level of evidence: III.

Obesity trends over 10 years in primary hip and knee arthroplasty-a study of 12,000 patients.

OBJECTIVES/AIMS: Obesity and its increasing prevalence are global public health concerns. Following joint replacement, there is evidence to support that obese patients are more likely to suffer complications. We examined 10-year trends in BMI of the primary total hip and total knee replacement cohorts in our institution to discern whether the BMI of these patients has changed over time. METHODS: We examined BMI data of patients who underwent primary hip and knee arthroplasty from our institutional database from January 1, 2010 to December 31, 2019 (n = 12,169). We analysed trends in BMI over this period with respect to (i) surgical procedure, (ii) gender, and (iii) age categories. RESULTS: The overall number of surgical procedures increased over the study period which meant more obese patients underwent surgery over time. Average BMI did not change significantly over time; however, there was a statistically significant increase in BMI in females aged < 45 in both arthroplasty groups. CONCLUSION: The average BMI of patients undergoing primary hip and knee arthroplasty in our high-volume tertiary orthopaedic centre has remained relatively unchanged over the past 10 years; however, our local service is caring for a greater number of overweight/obese patients due to the increase in overall volume. This will have significant implications on health care expenditure and infrastructure going forward which further emphasises the importance of ongoing national obesity prevention strategies. The increase in BMI seen in females aged < 45 may mark an impending era of obese younger patients with end-stage osteoarthritis.

Does Proximal Femoral Morphology Impact Morbidity and Mortality? A Cohort Study of Uncemented Hemiarthroplasties in the Treatment of Femoral Neck Fractures.

BACKGROUND: To assess outcomes after uncemented hemiarthroplasty stems in the treatment of intracapsular femoral neck fractures over an 11-year period. Mortality rates were assessed, and whether proximal femoral geometry and stem alignment were factors in intraoperative or postoperative periprosthetic fracture (PPF) needs to be identified. MATERIALS AND METHODS: A retrospective single-center observational study was conducted of all patients who underwent intracapsular femoral neck fracture treatment using an uncemented prosthesis between January 2008 and December 2018. Primary endpoints included mortality rate, Dorr classification, prosthesis alignment, intraoperative fracture, and reoperation rate for any reason. Subanalysis on collared and uncollared implants was also conducted. Multivariate logistic regression was performed based on Dorr classification for stem alignment, fracture incidence, reoperation rate, implant sizing, and patient mortality. RESULTS: A total of 536 patients received an uncemented hemiarthroplasty in the study period. The mean patients age was 80.4 years, of which 71% were female. The 30-day mortality rate was 5.2%, with no deaths on day zero or day one. Twenty patients (3.7%) sustained an intraoperative calcar fracture, and 14 patients a PPF (2.6%) at a mean of 1.3 years from surgery. Dorr C type femurs were more likely to develop a PPF (P = .001), while valgus stem alignment was associated with PPF (P = .049). CONCLUSIONS: This implant has low reoperation rates, low early postoperative mortality, and low 30-day mortality. This large single-center study provides up-to-date information using a contemporary stem in patients with multiple comorbidities. Dorr C femoral morphology and valgus stem malalignment were risk factors for postoperative fractures.

Midterm Outcomes After Reconstruction of Superolateral Acetabular Defects Using Flying Buttress Porous Tantalum Augments During Revision Total Hip Arthroplasty.

BACKGROUND: Porous tantalum augments are versatile tools in reconstructing complex acetabular defects during revision total hip arthroplasty (THA). This study examines the clinical and radiographic outcomes of porous tantalum augments placed in the type I (flying buttress) configuration at two to 17-year follow-up in the largest cohort to-date in the literature. METHODS: We retrospectively analyzed 59 consecutive revision THAs involving the use of flying buttress augments between 2003 and 2018. The mean patient age and follow-up duration were 63.9 ± 11.6 years (range, 35-87) and 8 years (range, 2-17), respectively. The Oxford hip score was used to assess clinical outcome. The modified Moore classification was used to assess acetabular augment and shell osseointegration. Kaplan-Meier survival analysis with 95% confidence interval (CI) was used to assess implant survivorship. RESULTS: The mean Oxford hip score improved from 15.9 ± 6.2 preoperatively to 35.0 ± 6.5 at a mean follow-up of eight years (P < .0001). Radiographic assessment using the modified Moore classification demonstrated five signs of osseointegration in 49 hips (83.1%), four signs in six hips (10.2%), three signs in one hip (1.7%), and one sign in one hip (1.7%). Kaplan-Meier analysis demonstrated ten-year survivorship of 88.9% (95% CI 74.4-95.4) with all-cause revision as end point and 94.3% (95% CI 83.1-98.2) with revision for acetabular aseptic loosening as end point. CONCLUSION: Treatment of superolateral acetabular defects during revision THA using porous tantalum augments placed in the type I (flying buttress) configuration provides excellent implant survivorship and favorable clinical outcomes at mid-term follow-up. LEVEL OF EVIDENCE: Therapeutic Level IV.

Current concepts and outcomes in cemented femoral stem design and cementation techniques: the argument for a new classification system.

Cemented implant fixation design principles have evolved since the 1950s, and various femoral stem designs are currently in use to provide a stable construct between the implant-cement and cement-bone interfaces.Cemented stems have classically been classified into two broad categories: taper slip or force closed, and composite beams or shaped closed designs. While these simplifications are acceptable general categories, there are other important surgical details that need to be taken into consideration such as different broaching techniques, cementing techniques and mantle thickness.With the evolution of cemented implants, the introduction of newer implants which have hybrid properties, and the use of different broaching techniques, the classification of a very heterogenous group of implants into simple binary categories becomes increasingly difficult. A more comprehensive classification system would aid in comparison of results and better understanding of the implants' biomechanics.We review these differing stem designs, their respective cementing techniques and geometries. We then propose a simple four-part classification system and summarize the long-term outcomes and international registry data for each respective type of cemented prosthesis. Cite this article: EFORT Open Rev 2020;5:241-252. DOI: 10.1302/2058-5241.5.190034.

Evaluation of the Medial Stabilized Knee Design Using Data From National Joint Registries and Current Literature.

BACKGROUND: Various designs of total knee arthroplasty (TKA) have provided satisfactory outcomes for the treatment of knee osteoarthritis for many years. The aim of the study is to evaluate the success and failure rate of the medial stabilized (MS) TKA design through national joint registries and the current literature. MATERIALS AND METHODS: A comprehensive literature review using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses was carried out through PubMed and MEDLINE database. The international registries analyzed included the National Joint Registry, the Australian Orthopedic Association National Joint Replacement Registry, the Dutch Arthroplasty Register, the New Zealand Orthopedic Association Joint Registry, and the Michigan Arthroplasty Registry Collaborative Quality Initiative. We are reporting descriptive data which include means and percentages of survival rates and revision rates and number of years after the primary procedure. The revision rates and the cumulative revision rates are reported separately for each MS implant. RESULTS: Our detailed review identified 5 of 12 registries and 25 of 550 studies reporting on the survivorship of an MS TKA design. There were a total of 3684 procedures between the 25 studies, with an average survivorship free of aseptic loosening of 99% at 6.9 years. There are 26,693 (2.5%) MS TKAs in the current National Joint Registry with a mean cumulative revision rate of 2.63% at 5 years, 3.35% at 10 years, and 4.6% at 15 years. The Australian Orthopedic Association National Joint Replacement Registry provides survivorship data on 19,249 (2.9%) MS TKAs, with a mean cumulative revision rate of 3.34% at 5 years, 7.4% at 10 years, and 8.1% at 15 years. The Dutch Arthroplasty Register contains survivorship data on 1490 MS designs and a mean revision rate of these implants is 0.8% at 1 year, 5.95% at 5 years, and 9.8% at 10 years. The Evolution MP is the only implant reported in the Michigan Arthroplasty Registry Collaborative Quality Initiative and has a revision rate of 2.28% at 3 years. CONCLUSION: The MS TKA design has comparable results to traditional TKA designs across several joint registries and 25 studies in the literature.

Arthroplasty and global research output: A bibliometric analysis.

INTRODUCTION: Peer-reviewed research helps to advance many aspects of medical and surgical practice. This paper determines the main contributors tos joint arthroplasty research in terms of quantity and quality. METHODS: A search of the Web of Science™ platform was conducted to identify arthroplasty articles published between 2001 and 2016. The number of articles and citations per article were analysed to assess the quantity and quality of research from individual countries. Results were standardised according to the country's populations and Gross Domestic Product (GDP). RESULTS: In total, 43,470 arthroplasty articles were published worldwide from January 2001 through December 2016. There was a 4.5-fold increase in global output during this time period. Twenty-two countries contributed at least 1% to the total number of publications. The United States of America published the most articles (35.40%), followed by England (10.31%) and Germany (10.03%). The USA had the highest absolute number of citations (50,777). Denmark had the highest average citation per item (8.76). When number of articles was normalized to population, Switzerland ranked the highest. When adjusted by GDP, Scotland ranked highest. When standardised according to GDP per capita, the People's Republic of China rated highest. The Journal of Arthroplasty produced the highest number of publications related to arthroplasty with 10.9% of total volume. CONCLUSION: There has been a substantial increase in worldwide publications relating to arthroplasty. The USA has produced the largest volume whilst Denmark has produced the highest quality publications. When output was normalized according to population and GDP, Switzerland and Scotland ranked highest.

Trends in the management of fractures of the distal radius in Ireland: did the Distal Radius Acute Fracture Fixation Trial (DRAFFT) change practice?

AIMS: The aim of this study was to examine trends in the management of fractures of the distal radius in Ireland over a ten-year period, and to determine if there were any changes in response to the English Distal Radius Acute Fracture Fixation Trial (DRAFFT). PATIENTS AND METHODS: Data was grouped into annual intervals from 2008 to 2017. All adult inpatient episodes that involved emergency surgery for fractures of the distal radius were included. RESULTS: In 2008 Kirschner-wire (K-wire) fixation accounted for 59% of operations for fractures of the distal radius, and plate fixation for 21%. In 2017, the rate of K-wire fixation had fallen to 30%, and the proportion of patients who underwent plate fixation had risen to 62%. CONCLUSION: There is an increasing trend towards open reduction and internal fixation for fractures of the distal radius in Ireland. This has been accompanied by a decrease in popularity for K-wire fixation. DRAFFT did not appear to influence trends in the management of fractures of the distal radius in Ireland. Cite this article: Bone Joint J 2019;101-B:1550-1556.

Comparison of 4 different techniques in first metatarsophalangeal joint arthrodesis.

AIMS: The aim of this study was to evaluate outcomes and fusion rates of 4 different methods of first metatarsophalangeal joint (MTPJ) arthrodesis. METHODS: We performed a retrospective analysis of first MTPJ fusion using Bold® and Acutrak® compression screws, universal 1/3 tubular plate and Hallu®-S non-locking plate in 6 hospitals in Dublin over 4 years. A cohort of 300 patients (351 feet) was operated on by 3 feet and ankle fellowship trained orthopaedic surgeons (PK, MMS, JVMcK) over 4 years. Mean age was 62.4 years. There were 261 females and 39 males. One hundred three patients had a fusion of first MTPJ using two Acutrak® screws and 90 with two Bold® screws. Sixty-five were fused with the Hallu-S® plate and 42 with the universal 1/3 tubular plate. Patients were evaluated clinically and radiographically at 6 weeks, 3 months and 12 months. RESULTS: Functional outcome scores performed using Manchester-Oxford Foot Questionnaire (MOXFQ). Failure rate in those fused with the Hallu®-S plate was 0%, Acutrak® screws 2.4%, Bold® screws 9.5% and universal 1/3 tubular plate 12.5% (p > 0.12). All treatment groups demonstrated significantly reduced MOXFQ scores (p value < 0.05). CONCLUSION: In this retrospective study for first MTPJ fusion, a low profile, pre-contoured plate in combination with a screw mode had the best results with no failure rates and improved MOXFQ scores. LEVEL OF CLINICAL EVIDENCE: IV, retrospective study.

Total hip replacement-the cause of failure in patients under 50 years old?

AIM: To establish the mode of failure of primary total hip replacement in patients under 50 years old. METHODS: A total of 1062 revision total hip arthroplasties were performed over a 5-year period, with 146 on patients under 50 years old. These were subdivided into early (< 5 years) and late (> 5 years) failures from the index procedure. RESULTS: The commonest mechanism of failure was aseptic loosening (42.3%) followed by metal-on-metal failure (15.8%), infection (14.4%) and instability (9.6%). The commonest cause of early revision surgery was due to metal-on-metal failure (27.8%) followed by aseptic loosening (19.7%) and infection (18.4%). In the late revision group, the main cause of failure was aseptic loosening (64%) and infection (10.7%). CONCLUSION: The changing trend of early revision due to metal-on-metal failure is important to recognise. Continuous review of the mechanism of primary total hip replacement failure is necessary to ensure the best patient outcome and maximise implant survivorship.

Extensive Bone Reaction From Catastrophic Oxidized Zirconium Wear.

The use of alternative bearing surfaces for total hip arthroplasty has become popular to minimize wear and increase longevity, especially in young patients. Oxidized zirconium (Oxinium; Smith & Nephew, Memphis, Tennessee) femoral heads were introduced in the past decade for use in total hip arthroplasty. The advantages of oxidized zirconium include less risk of fracture compared with traditional ceramic heads. This case report describes a patient with a history of bilateral avascular necrosis of the femoral head after chemotherapy for acute lymphoblastic leukemia. Nonoperative management of avascular necrosis failed, and the patient was treated with bilateral total hip arthroplasty. The patient was followed at regular intervals and had slow eccentric polyethylene wear during a 10-year period. After 10 years, the patient had accelerated wear, with femoral and acetabular bone changes as a result of Oxinium and ultrahigh-molecular-weight polyethylene wear during a 6-month period. This article highlights the unusual accelerated bone changes that occurred as a result of Oxinium wear particles.

Management of total femoral bone loss using a hybrid cement spacer surgical technique.

Standard treatment for an infected total hip arthroplasty is 2-stage revision. Bone loss in infected total hip arthroplasty presents specific challenges during the first stage. This is especially the case when there is massive or complete loss of the femoral bone stock. We describe a technique successfully used in the setting of total femoral bone loss using a hybrid cement spacer. We describe 2 cases illustrating the technique and perioperative course. This technique is a potential solution for total femoral bone loss that allows the individual to maintain mobility before definitive surgery.

The 25 most cited articles in arthroscopic orthopaedic surgery.

PURPOSE: The purpose of this study was to use Web of Knowledge to determine which published arthroscopic surgery-related articles have been cited most frequently by other authors by ranking the 25 most cited articles. We furthermore wished to determine whether there is any difference between a categorical "journal-by-journal" analysis and an "all-database" analysis in arthroscopic surgery and whether such a search methodology would alter the results of previously published lists of "citation classics" in the field. We analyzed the characteristics of these articles to determine what qualities make an article important to this subspecialty of orthopaedic surgery. METHODS: Web of Knowledge was searched on March 7, 2011, using the term "arthroscopy" for citations to articles related to arthroscopy in 61 orthopaedic journals and using the all-database function. Each of the 61 orthopaedic journals was searched separately for arthroscopy-related articles to determine the 25 most cited articles. An all-database search for arthroscopy-related articles was carried out and compared with a journal-by-journal search. Each article was reviewed for basic information including the type of article, authorship, institution, country, publishing journal, and year published. RESULTS: The number of citations ranged from 189 to 567 in a journal-by-journal search and from 214 to 1,869 in an all-database search. The 25 most cited articles on arthroscopic surgery were published in 11 journals: 8 orthopaedic journals and 3 journals from other specialties. The most cited article in arthroscopic orthopaedic surgery was published in The New England Journal of Medicine, which was not previously identified by a journal-by-journal search. CONCLUSIONS: An all-database search in Web of Knowledge gives a more in-depth methodology of determining the true citation ranking of articles. Among the top 25 most cited articles, autologous chondrocyte implantation/transplantation is currently the most cited and most popular topic in arthroscopic orthopaedic surgery and research. CLINICAL RELEVANCE: Analysis of the 25 most cited articles allows us to identify the most popular field of research in arthroscopic orthopaedic surgery and gives us insight into the quality and characteristics that are required for an article to become highly cited.

A cadaveric model for suprascapular nerve injury during glenoid component screw insertion in reverse-geometry shoulder arthroplasty.

BACKGROUND: Reverse-geometry shoulder replacement requires fixation of a baseplate (called a metaglene) to the glenoid, to which a convex glenosphere is attached. Most systems use screws to achieve this fixation. The suprascapular nerve passes close to the glenoid and is known to be at risk of injury when devices and sutures are inserted into the glenoid. We investigate the risk posed to the suprascapular nerve by placement of metaglene fixation screws. MATERIALS AND METHODS: Ten cadaveric shoulder specimens were used. A metaglene was inserted and fixed by use of 4 screws. The suprascapular nerve was dissected and its branches identified. The screw tips and their proximity to the nerve and branches were identified and recorded. RESULTS: The superior and posterior screws posed the most risk to the suprascapular nerve. The nerve was engaged by the posterior screw on 4 occasions and was within 5 mm of the nerve or a branch of it in 5 others. The superior screw was extraosseous on 4 occasions, making contact with the nerve in 3 of those 4 specimens and being within 2 mm of it in the fourth specimen. CONCLUSION: Metaglene fixation with screws poses a significant risk to the suprascapular nerve. Caution should be used when inserting the posterior and superior screws in particular. Short locking screws may allow adequate fixation while minimizing the risk of neurologic injury.