RESUMEN
Microwave-assisted deep eutectic solvent (DES) has received attention as an ultrafast pretreatment method in lignocellulose fractionation. This study investigated the improvement of milled softwood mixture (MSM) fractionation with chlorine chloride-formic acid (ChCl:FA) to obtain residues with high glucan retention and purity while removing majority of the lignin and hemicelluloses. At the optimum pretreatment conditions i.e., ChCl:FA (1:4), 140 °C, 14 min, 800 W and 15 % (w/v), 96.2 % hemicellulose removal, 90.1 % delignification and 93.5 % glucan retention were achieved. About 85 % lignin was recovered with a 95 % purity when solid loading was 10-20 % (w/v). This study showed that microwave assisted ChCl:FA pretreatment was a suitable means to fractionate MSM to achieve high quality glucan and lignin at high solid loading.
Asunto(s)
Disolventes Eutécticos Profundos , Lignina , Lignina/química , Microondas , Biomasa , Solventes/química , Cloruros , HidrólisisRESUMEN
Two methods, HCl and enzymatic treatments, were evaluated for diversification of morphological and functional properties of cellulose nanofibers (CNF) from two- stage-alkaline pre-treated wheat straw (WS). The extraction conditions were optimized by a central composite designed experimental approach varying time (4-8 h) and temperature (80-120 °C) for the HCl-based treatment and time (4-8 h), and FiberCare dosage (50-100 endo-1,4-ß-glucanase unit/g) and Viscozyme (10-20 fungal ß-glucanase units/g) for the enzyme-based treatment. The CNF yields, morphological (polydispersity index (PdI), length and diameter), and functional (crystallinity and thermal degradation) properties were compared. The CNF produced by the HCl (HCN) and enzymatically (ECN) attained diameters ~17 nm had PdI, length, and crystallinity of 0.53, 514 nm & 70%, and 0.92, 1.0 µm & 48%, respectively. Thus, the HCN morphology suits homogenous nano-applications, whereas that of the ECN, would suit heterogenous nano-applications. The HCN and ECN yields were similar (~20%) with optimal production time of 7.41 and 4.64 h, respectively. Both the HCN & ECN can be classified as thermally stable nanocolloids with maximum thermal degradation temperatures of ~380 °C and Zeta potential ~-16 mV. The two CNF production methods have potential synergetic effects on CNF production, morphological, and functional properties.