RESUMEN
Thlaspi arvense (Pennycress) is an emerging feedstock for biofuel production because of its high seed oil content enriched in erucic acid. A transcriptomic and a lipidomic study were performed to analyze the dynamics of gene expression, glycerolipid content and acyl-group distribution during seed maturation. Genes involved in fatty acid biosynthesis were expressed at the early stages of seed maturation. Genes encoding enzymes of the Kennedy pathway like diacylglycerol acyltransferase1 (TaDGAT1), lysophosphatidic acid acyltransferase (TaLPAT) or glycerol 3-phosphate acyltransferase (TaGPAT) increased their expression with maturation, coinciding with the increase in triacylglycerol species containing 22:1. Positional analysis showed that the most abundant triacylglycerol species contained 18:2 at sn-2 position in all maturation stages, suggesting no specificity of the lysophosphatidic acid acyltransferase for very long chain fatty acids. Diacylglycerol acyltransferase2 (TaDGAT2) mRNA was more abundant at the initial maturation stages, coincident with the rapid incorporation of 22:1 to triacylglycerol, suggesting a coordination between Diacylglycerol acyltransferase enzymes for triacylglycerol biosynthesis. Genes encoding the phospholipid-diacylglycerol acyltransferase (TaPDAT1), lysophosphatidylcholine acyltransferase (TaLPCAT) or phosphatidylcholine diacylglycerolcholine phosphotransferase (TaPDCT), involved in acyl-editing or phosphatidyl-choline (PC)-derived diacylglycerol (DAG) biosynthesis showed also higher expression at the early maturation stages, coinciding with a higher proportion of triacylglycerol containing C18 fatty acids. These results suggested a higher contribution of these two pathways at the early stages of seed maturation. Lipidomic analysis of the content and acyl-group distribution of diacylglycerol and phosphatidyl-choline pools was compatible with the acyl content in triacylglycerol at the different maturation stages. Our data point to a model in which a strong temporal coordination between pathways and isoforms in each pathway, both at the expression and acyl-group incorporation, contribute to high erucic triacylglycerol accumulation in Pennycress.
RESUMEN
The development of optical sensors for in situ testing has become of great interest in the rapid diagnostics industry. We report here the development of simple, low-cost optical nanosensors for the semi-quantitative detection or naked-eye detection of tyramine (a biogenic amine whose production is commonly associated with food spoilage) when coupled to Au(III)/tectomer films deposited on polylactic acid (PLA) supports. Tectomers are two-dimensional oligoglycine self-assemblies, whose terminal amino groups enable both the immobilization of Au(III) and its adhesion to PLA. Upon exposure to tyramine, a non-enzymatic redox reaction takes place in which Au(III) in the tectomer matrix is reduced by tyramine to gold nanoparticles, whose reddish-purple color depends on the tyramine concentration and can be identified by measuring the RGB coordinates (Red-Green-Blue coordinates) using a smartphone color recognition app. Moreover, a more accurate quantification of tyramine in the range from 0.048 to 10 µM could be performed by measuring the reflectance of the sensing layers and the absorbance of the characteristic 550 nm plasmon band of the gold nanoparticles. The relative standard deviation (RSD) of the method was 4.2% (n = 5) with a limit of detection (LOD) of 0.014 µM. A remarkable selectivity was achieved for tyramine detection in the presence of other biogenic amines, especially histamine. This methodology, based on the optical properties of Au(III)/tectomer hybrid coatings, is promising for its application in food quality control and smart food packaging.
Asunto(s)
Oro , Nanopartículas del Metal , Tiramina , Aminas Biogénicas , Poliésteres , Colorimetría/métodosRESUMEN
The question of whether exosome lipids can be considered as potential cancer biomarkers faces our current limited knowledge of their composition. This is due to the difficulty in isolating pure exosomes, the variability of the biological sources from which they are extracted, and the uncertainty of the methods for lipid characterization. Here, we present a procedure to isolate exosomes and obtain a deep, repeatable, and rapid phospholipid (PL) composition of their lipid extracts, from embryonic murine fibroblasts (NIH-3T3 cell line) and none (B16-F1) and high (B16-F10) metastatic murine skin melanoma cells. The analytical method is based on High Performance Thin-Layer Chromatography with Ultraviolet and fluorescence densitometry and coupled to Electrospray (ESI)-tandem Mass Spectrometry (MS). Under the conditions described in this work, separation and determination of PL classes, (sphingomyelins, SM; phosphatidylcholines, PC; phosphatidylserines, PS; and phosphatidylethanolamines, PE) were achieved, expressed as µg PL/100 µg exosome protein, obtained by bicinchoninic acid assay (BCA). A detailed structural characterization of molecular species of each PL class was performed by simultaneous positive and negative ESI-MS and MS/MS directly from the chromatographic plate, thanks to an elution-based interface.
Asunto(s)
Cromatografía en Capa Delgada/métodos , Exosomas/metabolismo , Fibroblastos/metabolismo , Melanoma Experimental/patología , Fosfolípidos/metabolismo , Espectrometría de Masa por Ionización de Electrospray/métodos , Animales , Melanoma Experimental/metabolismo , Ratones , Células 3T3 NIH , Fosfolípidos/análisisRESUMEN
Identification of 19 molecular species of globotriaosylceramides (Gb3) in extracts from a Fabry's plasma patient and a healthy control was performed by High-Performance Thin-Layer Chromatography (HPTLC)-densitometry and online coupling to Mass Spectrometry (MS). Separation was carried out on LiChrospher plates using Automated Multiple Development (AMD). Densitometry was performed on twin plates by combining detection in the visible at 550 nm, through previous on-plate orcinol derivatization, and by Ultraviolet 190 nm, using a non-impregnated plate. The latter was directly coupled to an ion-trap mass spectrometer through an automated elution-based interface. Gb3 molecular species, which were identified by HPTLC- Electrospray Mass Spectrometry (+)-MS and confirmed by MS/MS or HPTLC-Atmospheric Pressure Chemical Ionization Mass Spectrometry (+)-MS, are: five isoforms of saturated Gb3; seven isoforms of methylated Gb3; and seven species with two additional double bonds. Twelve of these species were previously reported as biomarkers of Fabry's lysosomal disorder using a Liquid Chromatography-MS-based method, and the other seven are structurally similar, closely related to them. Saturated Gb3 isoforms migrated on LiChrospher plate in one of the separated peaks corresponding to the migration zone of ceramide trihexosides standard. Instead, methylated and unsaturated Gb3 species co-migrated with sphingomyelin species. Ion intensity ESI-MS profiles show that saturated Gb3 species in Fabry's plasma were in higher concentration than in control sample. Before applying the Thin-Layer Chromatography (TLC)-MS interface on HPTLC separated peaks, its positioning precision was first studied using ceramide tri-hexosides as model compound. This provided information on Gb3 peak broadening and splitting during its migration.
Asunto(s)
Cromatografía en Capa Delgada/métodos , Densitometría , Enfermedad de Fabry/sangre , Trihexosilceramidas/sangre , Biomarcadores/sangre , Enfermedad de Fabry/diagnóstico , Humanos , Metilación , Isoformas de Proteínas/sangre , Estándares de Referencia , Espectrometría de Masa por Ionización de Electrospray , Esfingolípidos/sangre , Espectrometría de Masas en Tándem , Trihexosilceramidas/análisis , Trihexosilceramidas/químicaRESUMEN
Carbon nanomaterials have attracted increasing attention in biomedicine recently to be used as drug nanocarriers suitable for medical treatments, due to their large surface area, high cellular internalization and preferential tumor accumulation, that enable these nanomaterials to transport chemotherapeutic agents preferentially to tumor sites, thereby reducing drug toxic side effects. However, there are widespread concerns on the inherent cytotoxicity of carbon nanomaterials, which remains controversial to this day, with studies demonstrating conflicting results. We investigated here in vitro toxicity of various carbon nanomaterials in human epithelial colorectal adenocarcinoma (Caco-2) cells and human breast adenocarcinoma (MCF-7) cells. Carbon nanohorns (CNH), carbon nanotubes (CNT), carbon nanoplatelets (CNP), graphene oxide (GO), reduced graphene oxide (GO) and nanodiamonds (ND) were systematically compared, using Pluronic F-127 dispersant. Cell viability after carbon nanomaterial treatment followed the order CNP < CNH < RGO < CNT < GO < ND, being the effect more pronounced on the more rapidly dividing Caco-2 cells. CNP produced remarkably high reactive oxygen species (ROS) levels. Furthermore, the potential of these materials as nanocarriers in the field of drug delivery of doxorubicin and camptothecin anticancer drugs was also compared. In all cases the carbon nanomaterial/drug complexes resulted in improved anticancer activity compared to that of the free drug, being the efficiency largely dependent of the carbon nanomaterial hydrophobicity and surface chemistry. These fundamental studies are of paramount importance as screening and risk-to-benefit assessment towards the development of smart carbon nanomaterial-based nanocarriers.
RESUMEN
In this study, we describe the transfer of a new and fully automated workflow for the cost-effective drug screening of large populations based on the dried blood spot (DBS) technology. The method was installed at a routine poison control center and applied for DBS and dried urine spot (DUS) samples. A fast method focusing on the high-interest drugs and an extended screening method were developed on the automated platform. The dried cards were integrated into the automated workflow, in which the cards were checked in a camera recognition system, spiked with deuterated standards via an in-built spraying module and directly extracted. The extract was transferred online to an analytical LC column and then to the electrospray ionization tandem mass spectrometry system. The target compounds were analyzed in positive multiple-reaction monitoring mode. Before each sample batch or analysis day, calibration samples were measured to balance inter-day variations and to avoid false negative samples. An internal standard was integrated prior the sample extraction to allow in process control. A total of 28 target compounds were analyzed and directly extracted within 5 min per sample. This fast screening method was then extended to 20 min, enabling the usage of a Forensic Toxicology Database to screen over 1,200 drugs. The method gives confident positive/negative results for all tested drugs at their individual cut-off concentration. Good precision (±15%, respectively ±20% at limit of quantification) and correlation within the calibration range from 5 to 1,000 ng/mL was obtained. The method was finally applied to real cases from the lab and cross-checked with the existing methodologies.
Asunto(s)
Pruebas con Sangre Seca/métodos , Toxicología Forense/métodos , Drogas Ilícitas/sangre , Lugar de Trabajo , Calibración , Cromatografía Liquida , Pruebas con Sangre Seca/instrumentación , Toxicología Forense/instrumentación , Humanos , Límite de Detección , Estándares de Referencia , Detección de Abuso de Sustancias , Espectrometría de Masas en TándemRESUMEN
Here we present a route for non-covalent functionalization of carboxylated multi-walled carbon nanotubes and graphene oxide with novel two-dimensional peptide assemblies. We show that self-assembled amino-terminated biantennary and tetraantennary oligoglycine peptides (referred to as tectomers) effectively coat carboxylated multi-walled carbon nanotubes and also strongly interact with graphene oxide due to electrostatic interactions and hydrogen bonding as the driving force, respectively. The resulting hybrids can be made into free-standing conducting composites or applied in the form of thin, pH-switchable bioadhesive coatings onto graphene oxide fibers. Monitoring of cell viability of pancreatic cell lines, seeded on those CNT hybrids, show that they can be used as two- and three-dimensional scaffolds to tissue engineer tumour models for studying ex vivo the tumour development and response to treatment. This highly versatile method in producing pH-responsive hybrids and coatings offers an attractive platform for a variety of biomedical applications and for the development of functional materials such as smart textiles, sensors and bioelectronic devices.
RESUMEN
The nanocarrier capabilities of atomically smooth two-dimensional sheets of a biantennary oligoglycine peptide C8H16(-CH2-NH-Gly5)2 (also called tectomers) are demonstrated. We show that the pH-controlled, rapid, and reversible assembly and disassembly of oligoglycine can be effectively used for controlled loading and release of the anticancer drug and fluorescent probe coralyne. The calculated partition coefficient in water is of the same order of magnitude or higher when compared to other nanocarriers such as liposomes and micelles, signifying the tectomer's impressive loading capabilities. Moreover, the loading of guest molecules in tectomers facilitates the protection from rapid photochemically induced degradation. Such efficient, pH-sensitive, stable, and biocompatible nanocarriers are extremely attractive for biosensing, therapeutic, and theranostic applications. Additionally, our results suggest that these planar self-assembled materials can also act as phase-transfer vehicles for hydrophobic cargoes further broadening their biomedical and technological applications.
Asunto(s)
Portadores de Fármacos/química , Nanopartículas/química , Péptidos/química , Alcaloides de Berberina/farmacología , Liberación de Fármacos , Concentración de Iones de Hidrógeno , Microscopía Confocal , Nanopartículas/ultraestructura , Solubilidad , Soluciones , Espectrometría de Fluorescencia , Espectrofotometría Ultravioleta , beta Caroteno/farmacologíaRESUMEN
Changes in fluorescence emission due to non-covalent analyte-fluorophore interactions in silica gel plates are studied and used as a general detection procedure for thin-layer chromatography (TLC). The presence of the analyte modifies the microenvironment of the fluorophore and thus changes the balance between radiative (k(r)) and non-radiative (k(nr)) emission constants. A model is proposed for analyte-fluorophore induced electrostatic interactions, which depend on analyte polarizability and are responsible for fluorescence enhancements. As consequence of these induced interactions, the analyte creates an apolar environment that prevents non-fluorescent decay mechanisms, decreasing k(nr). On the other hand, the effect of an increase in refractive index on k(r) is investigated, as it contributes to some extent to fluorescence enhancements in silica gel medium. Changes in fluorescence emission should be regarded as a general property of fluorophores in the presence of analytes, and criteria that fluorophores should meet to be used as sensitive TLC probes are discussed here.
RESUMEN
According to Fluorescence Detection by Intensity Changes (FDIC) the fluorescence intensity of many fluorophores depends on the non-covalent (specific and/or non-specific) interactions these fluorophores would be able to establish with the solvent and, more interestingly, with other surrounding molecules. This latter effect is the basis of FDIC for analytical purposes. In this paper, a preliminary study of FDIC applications using a fluorophore supported in a solid medium (sensor film) is presented. First, a mathematical model relating the analyte concentration with the immobilized fluorophore fluorescence is deduced. The model includes all the different mechanisms explaining this relationship: index of refraction or dielectric constant modification, scattering coefficient alteration and sensor film volume increase. Then, the very first experimental results are presented, using different fluorophores and solid supports. The best results were obtained using polyacrylamide (PAA) polymers and coralyne as the fluorophore. This sensor film is applied for albumin and polyethylenglycol determination and the results are compared with those obtained using coralyne in solution. Albumin quenches the coralyne fluorescence in both cases (solution and film), while PEG quenches coralyne fluorescence in films but increases it in solution. These results suggest that the outstanding fluorescence change mechanism is sensor films is the film volume increases, which is different than those observed in solution.
Asunto(s)
Técnicas de Química Analítica/instrumentación , Modelos Teóricos , Animales , Bovinos , Fenómenos Ópticos , Polietilenglicoles/análisis , Albúmina Sérica Bovina/análisis , Espectrometría de Fluorescencia , Agua/químicaRESUMEN
Changes in emission of berberine cation, induced by non-covalent interactions with lipids on silica gel plates, can be used for detecting and quantifying lipids using fluorescence scanning densitometry in HPTLC analysis. This procedure, referred to as fluorescence detection by intensity changes (FDIC) has been used here in combination with automated multiple development (HPTLC/AMD), a gradient-based separation HPTLC technique, for separating, detecting and quantifying lipids from different families. Three different HPTLC/AMD gradient schemes have been developed for separating: neutral lipid families and steryl glycosides; different sphingolipids; and sphingosine-sphinganine mixtures. Fluorescent molar responses of studied lipids, and differences in response among different lipid families have been rationalized in the light of a previously proposed model of FDIC response, which is based on ion-induced dipole interactions between the fluorophore and the analyte. Likewise, computational calculations using molecular mechanics have also been a complementary useful tool to explain high FDIC responses of cholesteryl and steryl-derivatives, and moderate responses of sphingolipids. An explanation for the high FDIC response of cholesterol, whose limit of detection (LOD) is 5 ng, has been proposed. Advantages and limitations of FDIC application have also been discussed.
Asunto(s)
Cromatografía Líquida de Alta Presión/métodos , Cromatografía en Capa Delgada/métodos , Lípidos/aislamiento & purificación , Espectrometría de Fluorescencia/métodos , Berberina , Colesterol , Densitometría/métodos , Lípidos/química , Sensibilidad y EspecificidadRESUMEN
The reaction between benzynes and imidazo[1,2-a]pyridines (pyrimidines) to form benzo[a]imidazo[5,1,2-cd]indolizines and 2,3,9c-triazocyclopenta[j,k]fluorenes has been studied computationally and experimentally. It is found that these reactions take place via tandem [(pi)8(s) + (pi)2(s)] and [(sigma)2(s) + (pi)6(s) + (sigma)2(s)] processes. The [8 + 2] cycloaddition steps are essentially barrierless, and the aromatization steps occur via highly synchronous aromatic transition structures. From an experimental standpoint, the reaction is feasible under microwave irradiation and using 2-(trimethylsilyl)phenyl triflates as benzyne precursors. Depending on the substitution pattern in the starting triflate a complete regiocontrol of the reaction can be achieved. The tetracyclic compounds thus prepared emitted blue light when excited at 365 nm and exhibited interesting photophysical properties.
Asunto(s)
Imidazoles/química , Piridinas/química , Pirimidinas/química , Derivados del Benceno/química , Ciclización , Fluorenos/química , Hidrogenación , Indolizinas/química , Microondas , Estructura Molecular , Oxidación-ReducciónRESUMEN
Gel permeation chromatography with differential refractometry is used to obtain molecular weight distributions (MWD) of poly-(epsilon-caprolactams). Elution is carried out using an m-cresolchlorobenzene mixture (50:50, v/v) at 50 degrees C. MW values are obtained by a Hamielec-based calibration method, using broad-MWD poly-(epsilon-caprolactam) standards with the same chemical nature and similar MWD to the samples. Relative errors for the number-average MW (Mn) using this calibration method range from 0.4% (in the low polyamide MW range) to 20% (in the high polyamide MW range). These values are much lower than those obtained from narrow-MWD polystyrene calibration, which range from 39% to 78%. Similar values have been obtained for the other usual average MW parameters. The ability to obtain repeatability parameters for a given confidence interval and the utilization of statistical criteria for chromatogram rejection allow this method to be used in quality control for MWD of poly-(epsilon-caprolactams). Thus, production variables are related to polyamide-6 behavior in its ulterior treatment. Typical relative standard deviation percentages (for n=6) of a polyamide sample range from 1.9% (for Mn) to 3.3% (for M(z+1)).
RESUMEN
A large number of analytes, including non-fluorescent ones, can be sensitively detected by fluorescence scanning densitometry using silica gel HPTLC plates impregnated with a solution of coralyne cation. This is carried out by the variation, increase or decrease, that the corresponding analyte induces on native coralyne emission at a given excitation wavelength. A similar phenomenon was previously described for berberine cation, and Reichardt's dye probes. However, the sensitivity of coralyne in HPTLC detection of non-fluorescent, structurally different analytes (e.g., long-chain alkanes, alcohols, alkylbromides, neutral lipids) is superior to that of the above-mentioned probes. In this work, the analytical viability of this phenomenon for HPTLC detection using coralyne as a probe is explored, and fluorescent responses of a number of analytes on the coralyne system are rationalized in the light of a previously proposed model. This establishes that the resulting intensity for a probe in the presence of a given compound can be explained as a balance between radiative (contribution of non-specific interactions) and non-radiative processes (specific interactions), the latter producing fluorescence quenching. Experimental results and proposed model suggest that this phenomenon may be general for practically all kinds of analytes.
Asunto(s)
Alcaloides de Berberina/química , Cromatografía en Capa Delgada/métodos , Colorantes Fluorescentes/química , Cationes/química , Cromatografía en Capa Delgada/instrumentación , Densitometría/métodos , Reproducibilidad de los Resultados , Espectrometría de FluorescenciaRESUMEN
Many chemical compounds, including nonfluorescent ones, induce changes in the fluorescence spectra of certain probes, such as berberine cation and Reichardt's betaine, both in the absence and the presence of solvent, that affect almost exclusively emission intensity. In this work, the application of fluorescence detection by intensity changes (FDIC) to HPLC and TLC chromatographic systems with fluorescence detectors has been studied. FDIC detection is of special interest in detecting nonfluorescent analytes, either in HPLC or in TLC mode. It does not involve covalent interactions, and the dielectric permittivity (epsilon) of the medium plays an important role. The balance between nonspecific and specific interactions produces either an increase or a decrease in fluorescence intensity. Therefore, the influence of chromatographic conditions and chemical structure of analytes on the sign and magnitude of fluorescence peaks for sample detection in HPLC and TLC systems has been discussed. In general, probe nature and concentration determine response and detection sensitivity for a given sample in TLC and HPLC. As solubility and fluorescence properties in solvents determine the operating conditions for a FDIC probe in HPLC mode, nature and flows of mobile phase and solvent are important for chromatographic response and detection sensitivity.